Migration from Distribution Point within an SCCM2012 SP1 environment

Hi all,
in an exisiting SCCM2012 SP1 CU2 environment (one CAS, four Primary sites and some DPs) we have the following problem: The schedule HW for the DPs are not available and we are planing to use another HW Model for a timeframe the correct model is available.
When the new HW model is available I'm not sure how to move or migrate the content from the exisiting DP. Do you have this already done or ideas to do this.
Thanks for your feedback.
regards

Many possible ways to achieve that ... one would be: set up a temporary DP (using a temporary name). Set up the new DP once it arrived and configure it as a PullDP (so it will pull content from the temporary one). Wait until that process is finished. (Re-)configure
the (new) PullDP so that it becomes a "classic" (non-Pull) DP. Remove the temporary one.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

Remove package from Distribution Point

I have been fighting with an OS deployment for the last day. The log was showing it was unable to find the package p0100001 which was my boot image. I eventually got it working as I failed to configure my boundary correctly. But it got me wondering...
In SCCM 2007, it was pretty straight forward on how to remove packages from distribution points. But I still can't figure out how to remove a package, specifically a boot image, from a DP. I can view the distribution in the monitoring section and see the
package successfully deployed, but what if I wanted to remove that boot image from the DP? How is this done. I'm sure it's staring me in the face, but I'm missing it. Thanks!

I realize this is an old post, but I am dealing with the same issue regarding the removal of deployment package contents from Distribution Points. After removing a Distribution Point from the Contents Locations tab on one of my Deployment Packages,
how long does it take for the deployment package to be removed from the distribution point. I have removed a large deployment package from a distribution point, but am not seeing any increase in the available free space.
Any help would be appreciated.
Muskie
Muskie

How long until Deleted Content from Distribution Point frees disk space?

Hopefully this is an easy question for you guys with more experience with the product.
Yesterday, I created a new software distribution group for Office 2013 SP1, both 32 and 64bit. I didn't really understand at the time that it was going to download nearly 8GB into my /sources folder...which is where I save my package contents. I
would have not expected this download to exceed approx 2GB.
Since I indicated that it should also be distributed to my Distribution point, which is the same server, it also increased the disk usage in the /sccmcontentlib folder, as well as increasing the amount of space used in my SQLDatabase which is on the same
drive. It was never deployed to anything.
Since I'm not yet ready to deploy this update to clients, but have a few others things to do instead, I wanted to delete the content from the distribution point to free up some disk space.
I went into Software Library, Deployment Packages, went to properties of my Office2012_SP1 deployment, went to Content Locations, picked my single distribution point from the list, and chose Remove.
However, no disk space was cleared on my drive. I've still got 6GB free on my 120GB volume, so I'm not out of space.
Is this something where a scheduled job will come through and process this removal and free up the disk space? Or is there a way to kick of the process manually?

It was never setup as an application.
It was a Windows Update, which was added to a software update group. Then, I went to the software update group and right clicked and chose Download. I created a new deployment package, and then distributed the content to one of my distribution
point.
By doing that, I understood that it would create the D:\sources\WindowsUpdates\Office2013_SP1 folder and put the deployment files there. And I also see that because that content was set to a distribution point, it copied it there into the ContentLib.
So, I wanted to remove the data from ContentLib, so I went to the Deployment Package, went to Content locations and removed my Distribution Point.
So, are you saying that in order to remove the ContentLib, that I have to remove the entire Deployment Package?
I thought by removing the Content Location it would remove it from the DP, and if I later wanted to add it back ,I could go back to the Deployment Package, go into Properties and add a DP back to the content location.

What is the process that SCCM clients access content from Distribution Points?

I already know that the (Network Access Account) NAA is one method, and that it also has to have the
Access this computer from the net network right configured on the Distribution Point (Default server settings allow this). I am trying to understand what happens when the connection to the Distribution Point fails when using the NAA. Does the
client use the computer account (computername$) of the SCCM client or is the SCCM Site Server account (SCCMSiteServer$) instead. After reading
this and
this, I am not sure now. Hopefully someone can help clear this up.
--Tony

The first link also states: When Configuration Manager tries to use the computername$
account to download the content and it fails, it automatically tries the Network Access Account again, even if it has previously tried and failed.
The way this reads to me is that the Network Access Account is first attempted since it is tried again after the computername$ is
attempted. Peter, I am I just misunderstanding what it is trying to say? Also, is computername$ referring to the client machine and not
the SCCM site server? Is the SCCM site server ever used which is referenced in Gerry's blog?
Just to make sure I completely understand the process goes:
Local Computer account (ComputerName$)
Network Access Account (NAA)
No use of SCCM Site Server\s
--Tony

SCCM 2012 client push occurs from site server or from distribution point?

I would like to set up client push in SCCM 2012 and I have a remote site with about 80 workstations that I would like to deploy the clients to using client push, but this remote site is VERY slow, as in less than 3Mbps slow. There is a remote DP located
at this site and I wanted to know if the remote workstations will be hammering my Site Server across the WAN (or MP I guess since the MP role is i installed on the Site Server) to request the client installation, or do the clients just request the client from
the Site Server or MP and then the client downloads to the remote DP and then the workstations install the SCCM 2012 client from the local DP at the remote site?
I just do NOT want the WAN link to become overwhelmed with workstation requests to install the client and have the Site Server have to respond to each and every workstation and download the SCCM 2012 client to each system over this slow WAN link.
How does the client push process actually work?
Thank you

The initial files will come from the primary site server. The rest (the biggest part) will come of the distribution point. See for a good read (even though it's more about secondary sites), this post of Jason:
http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Sccm 2012 Can we migrate a distribution point to a Secondary site

Can we upgrade our SCCM 2012 Distribution point to a Secondary Site? Can anyone advise the process please?

Hi,
Please refer to the link below:
Planning a Content Deployment Migration Strategy in System Center 2012 Configuration Manager
http://technet.microsoft.com/en-us/library/gg712275.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012r2 - Remove "invisible" packages/applications from Distribution Point

Hello alltogether,
I've encountered the following issue:
Our distribution points are displaying applications/packages as "In Progress - Waiting for Prestage content".
These packages doesn't exist anymore. Neither as prestage file nor in the config manager itself. We never tried to apply this package by using a prestage file because such a file never existed.
Even if I open the "content" tab of one distribution point, I can't find these packages in there.
The exact status of this package is the following:
Message: Distribution Content
Message Detail: Distribution Manager instructed Package Transfer manager to send Package "x" to distribution point "y".
Status Type: In Progress
I want to remove these "ghost" packages from the Distribution Status overview. Anyone has a clue how to accomplish this?
Thanks in advance!
Best Regards
Feyh

Hello,
thanks for your answer!
Unfortunately no, there is no information about these files.
Yesterday we installed a new one, extracted all of our prestage files on it and watched the status. The Packages weren't listed in the "Distribution Point Configuration Status".
After some time we added the new DP to our general DP-group where all of our packages/applications are assigned to. Now the "non-existing" packages are added with the "in Progress" status.
I had a look into "Distribution Point groups -> Our group -> properties -> content" but these packages aren't displayed in the list. Some of the packages are now in the "waiting for prestage content" state, others are staying with the "Detail will
be available after the server finishes proccessing ...".
We managed to remove one of the packages by deleting it from the database.
The following statement removed it from the Distribution status overview. However, we still are able to find the package in the database.
select * from SMSPackageswhere PkgID = 'P100003B'
DELETE from SMSPackages
where PkgID = 'P100003B'
Apparently the delete-statement affected 72 rows. But we are having no clue which. As long as we are not sure we killed anything important we are not going to do this with the other packages because it's the productive system. We can't reproduce this in our
test system...

Application won't download/install from distribution point

Hello,
I have a new distribution point that clients refuse to download application deployments from. The advertisement(s) get stuck at "Downloading 0%".
The DP monitor confirms that the package is distributed. Boundary and boundary group is created and should be OK for this DP (which has firewall disabled).
When I take a client and put it on a different subnet, the application downloads from another working DP.
Any suggestions?

CAS.log --->Download started for content Content_310d8d2d-9457-455b-ac4a-1a03fb4567f3.1
-->And it will just hang until I cancel the deployment/install on the client.
LocationServices.log --> no errors
Unable to retrieve AD site membership --> ????both the client and the DP are domain members
Distribution Point='http://MNTH-SP-SRV01.xxxx.local/SMS_DP_SMSPKG$/Content_310d8d2d-9457-455b-ac4a-1a03fb4567f3.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>', Signature='http://MNTH-SP-SRV01.xxxx.local/SMS_DP_SMSSIG$/Content_310d8d2d-9457-455b-ac4a-1a03fb4567f3.1.tar', ForestTrust='TRUE'
(MNTH-SP-SRV01, this is the DP I'm trying to deploy from)
DP is associated to a boundary group, and the boundary with the address range which the server is on is a member of the boundary group.

OSD: howto force package to take sources from distribution point (not download it)?

Hi,
We have this package which installs correctly, but not in a task sequence. A network drive is mounted during install but we see the install fails due to the fact the package is downloaded (and share is made to c:\).
You can enforce this behaviour in a deployment (to a collection) but howto do this in a task sequence?
Please advise.
Please advise.
J.
Jan Hoedt

What a waste of time. So I should change every single package, application, script, bootimage of task sequence then also make a specific package for sccm 2012 client configmr just for the purpose a package installs from a distribution share instead of copying
the files locally?!
You're kidding right?
Jan Hoedt

PowerShell: Removing Numerous Obsolete Packages from Distribution Points

Hey Guys -
I've got many obsolete driver packages which were used up until last week when a new a new OSD task seqeunce was implemented rendering them no longer used. Each of them currently exists on all 3 DPs we use and were initially distributed to each DP
individually - not using a DP Group.
To try to avoid opening the properties of each of these packages and manually removing each of the 3 DPs, I am trying to find a way to do this with PowerShell for which I've used for many other SCCM operations before. Below is what I've tried to do
and the results I received.
Note
It is important to say that even though we are using 2012 R2, the primary still doesn't have PowerShell 3 installed. I am using v3 on my desktop, however. I was planning to update the primary a couple of weeks ago, but my manager (who is heavily
involved in the environement) had read about older issues when updating to WM3 and wanted me to check them out first. I don't believe there are still any major issues, but either way - it's on PowerShell v2 which may be why my stuff isn't working.
What I've Tried
The below two things have been tried from my system using PowerShell v3 after loading the cmdlets and connecting to our SCCM server
RemovePkgfromDP.ps1 Script - I first found this script on TechNet, downloaded it, and tried running it but
couldn't figure out the exact string to use. The Q&A has requests for exmaples, but didn't see any.
I also believe that this is for removing DP Groups and not individual DPs. Even though I currently have a group which includes all 3 of our DPs, I couldn't use it in the string as the package were added to individual DPs initially, right?
Remove-SCCMDPContent.ps1 Script - I tried this script also using the below string (which was taken from the script, itself as an example.) The only variable
I wasn't 100% on was what to put for the "-ComputerName" at the end. As our Primary is also one of our DPs, I used the same name for both. I also tried it with and withhout FQDN
Remove-SCCMDPContent -PackageID ABC000001 -DPname OurPrimary -Computername OurPrimary
The script executed without error (or feedback) but I never saw any changes in the log files on the primary and the package wasn't ever removed from the DP
Does anyone have any suggestions, thoughts, or ideas? Even though I'm running them from a remote instance of PowerShell v3, does it matter that the primary server is still on v2?
Thanks!
Ben K.

UPDATE
Nevermind - I'm a complete idiot. I had the hostname of the DP wrong. It works now. Thanks for your help!
Good Morning -
Thanks for the reply. I must had missed that cmdlet when scanning the list before. We do run 2012 R2 so I tried using it earlier this morning. Unfortunatly, I couldn't get it to work.
Below are example variables for my site as well as strings I tried followed by their results. I think the biggest question for me is why I must define a collection. What am I missing?
Primary SCCM Server (Also DP): SCCMABC01.abc.org
Driver Package Name: E6410-Windows7-x64-A11
Driver Package ID I'm wanting to remove from DP: ABC0011E
Site Code: ABC
User Collection Containing All Users (Not a member of any DP Group): ABC Humans
#1 String
Remove-CMContentDistribution -PackageId ABC0011E -DistributionPointName SCCMABC01
#1 Result
Remove-CMContentDistribution : No object corresponds to the specified
parameters.At line:1 char:1
+ Remove-CMContentDistribution -PackageId ABC0011F -DistributionPointName
SCCMAB ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.Confi...ributionComma
nd:RemoveContentDistributionCommand) [Remove-CMContentDistribution], ItemN
otFoundException
+ FullyQualifiedErrorId : ItemNotFoundException,Microsoft.ConfigurationMan
agement.Cmdlets.Sum.Commands.RemoveContentDistributionCommand
#2 String
Remove-CMContentDistribution -DriverPackageId ABC0011F -DistributionPointName SCCMABC01
#2 Result
WARNING: No collection was specified.
#3 String
Remove-CMContentDistribution -DriverPackageId ABC0011F -DistributionPointName SCCMABC01 -CollectionName "ABC Humans"
#3 Result
There's no feedback in PowerShell as it just goes to a new prompt as if it ran correctly. In SCCM, though, the package properties (after refreshing) still show it as on the DP.
What am I missing? Any suggestions? Thanks Guys!
Ben K.

IIS uninstalled from Distribution point

Hi All,
I have a DP in remote site with 2 MB bandwidth. Someone uninstalled IIS from that DP. Now how can i make my DP work without sending the packages again. If i reinstall the IIS, how will the sites for DP get created again ?
Thanks in advance.

Don't delete the SCCMContentLib folder and it should be reused (this isn't documented anywhere but it's what I've been told should work). You could use content pre-staging and use an out of band method (like FedEx) to then ship the content if this doesn't
work. Other than that, there's not much you can do if the DP isn't functional.
Jason | http://blog.configmgrftw.com | @jasonsandys

SEP Updates from distribution points

I'm trying to figure out the best and easiest way to leverage our DPs to updates the SEP definitions of the clients in their boundary group. Right now I have a ADR on the main site server to keep the clients up to date. I've distributed that deployment
package to all of our DPs. My question is....When the ADR runs and adds content to the SEP definitions package, does it automatically replicate those changes to the DPs or do I have to manually update DPs with that deployment package again? If that is the
case, is there a way for the DPs to download the definitions themselves and then use them to the update the clients at their location?

You can't create an update package without deploying it to a DP. Of course, you need to make sure it is deployed to all appropriate DPs (ConfigMgr can't magically do that), but once you've done that (which should be done at package creation time) then yes,
as Jeff mentioned, when the content in an update package is modified, it is automatically replicated to the content library on the site server and to any DPs it is deployed to.
Also, I'm assuming you are talking about System Center Endpoint Protection (SCEP) correct? SEP is the commonly used acronym for Symantec Endpoint Protection, two very different things.
Jason | http://blog.configmgrftw.com | @jasonsandys

Third-party font-suitcase migration from iMac G3 to iMac G4 Classic Environment

Hello,
I thought I was all set ... successfully installed Appleworks 6.0.3 in the Classic Environment on my "new" Sunflower iMac G4 so I can still use my 3 macros and 2 custom buttons ... and imported my user dictionary as well. That was last week. (Hard drive on G3 is failing or I wouldn't have made the switch.)
It turns out I am using one third party font, two suitcases: Merriam and Merriam-Webster that the G4 will not recognize even in the Classic Environment. I spent hours yesterday reading about font issues and trying various things but didn't find anything that seems to apply directly to my situation.
I obtained these fonts from Merriam-Webster back in 2003 as part of downloading a trial dictionary.... I don't even remember. It turns out that one of these fonts proved useful last year ... providing an elegant way of making fractions... instead of 1/2, it would appear as superscript 1 over subscript 2 (without going to the trouble of creating super- and sub-scripts) ... nice in a report where I have mixed fractions for acreage, linear measurements, and fractional ownership in halves, thirds, fourths, and fifths. (In Times New Roman, these combinations look like "azr", "azs", "azt", etc. ). I can certainly go back and manually (no format search-and-replace capability available in AW 6.0.3) replace these instances with superscripts and subscripts in Times New Roman, but I was hoping to be able to make the MerriamIPA font available in Classic. (Another option, to use the fractions available in Lucida Grande, seemed promising, but LG appears to be limited to OS X.)
What I have read indicates that you need to know what sort of font you are dealing with. The Merriam font suitcase looks just like all the other font suitcases on my G3 iMac, the little suitcase icon with an A on it. Inside, there are three fonts, each with the typical icon ... a page with the upper left corner turned down and a letter A on it. The Merriam suitcase contains 144 kb, the MerriamIPA font, 43 kb. The Managing Fonts help file on my iMac G3 says you can use Get Info in Finder to determine the font type. All I see is "font" or "font suitcase" for both the Merriam files/suitcases and several other native fonts.
I copied (using a thumb drive) the Merriam and Merriam-Webster font suitcases to /System Folder/Fonts on the G4 iMac. The suitcase displays zero bytes and file type Unix Executable File. I tried copying just the font independent of the suitcase. Same result. I tried appending .DFONT, .OTF, .TTF ... various font file extensions and was able to fake the system into thinking what sort of font file it is, but could not get the font to appear in AW 6.0.3.
I won't need this after I complete final edits on a 300-page report I have been working on for ten years (replete with drawings, footnotes, tables, etc.) At this point I'm anxious to get back to the edits and be done with migration issues! Hope someone can help.
-Dottie

I gave up on using a different font or figuring out if I could use Times New Roman's built-in fractions visible in Font Book (as unicodes) and did a work-around based on Michael Wasley's tips in this discussion.
https://discussions.apple.com/message/11622842#11622842
I adapted it however and think it looks a little better.
Font: Times New Roman 12 point
I used the fraction bar in 12-point (Shift-Option-1) for automatic kerning.
For the numerator, I changed the font style to superior (12-point).
For the denominator, I changed the font style to subscript (Shift-Command-hyphen) and reduced the font size to half, or 6-point using the short-cut Shift-Command-<.
When the fractions occured in my footnotes (9-point), I used 4-point in the denominator; 10- and 11-point, I used 5-point in the denominator. This seemed to produce the best result when printing.
Thank you, Michael.
-Dottie

2012 -- 2012 Migration: How to Reassign Distribution Points that Reside on Source Secondary Site Servers to the Target Site

Source hierarchy AAA is at 2012 R2 CU3 and contains a primary site and 14 secondary sites (A01 through A14). The 14 secondary site servers hold the following roles:
Site system
Management Point
State migration point
Site server
Site database server
Component server
Distribution Point
Target hierarchy BBB is also at 2012 R2 CU3 and contains only a primary site. The goal is to "downgrade" the severs at source secondary sites A01 through A14 to distribution points.
AAA was added as a source site. Data gathering was done. A migration job was created an run, and distribution points from the source hierarchy were shared to allow a phased migration of the clients.
We have reach the point where we are ready to reassign distribution points in sites A01 through A14 from AAA to BBB, but none of the shared distribution points are eligible for reassignment. We surmise that since the DP role is not the only role on
these servers (as you can see from the bullet list above), they are ineligible for reassignment. We are unable to remove most of the roles. In fact, the only 2 roles that can be removed are the DP role itself, and the State Migration
Point. If we delete the secondary site, it removes ALL roles...not leaving any behind...including the one we need...DP.
My question is 2-part:
Is our assumption correct? Must a DP role be the only one on the server for a DP to be eligible for reassignment?
Is there any way we can reassign these DPs instead of deleting everything and building them from scratch?
These secondary site servers are in branch offices and host a lot of distributed packages. It would be very inconvenient to have to rebuild the DPs from scratch and redistribute all those packages over the WAN.

Full Disclosure: I have never used this tool myself. I intend to, however the opportunity or time to do so has not yet arisen.
You could use the techniques outlined in CloneDP (https://gallery.technet.microsoft.com/scriptcenter/CloneDP-for-SCCM-2012-SP1-825ce5b1) to create prestage media on each DP and rebuild. That at least would prevent redistributing over the WAN
Ken provides a nice writeup too: http://blogs.technet.com/b/kensmith/archive/2013/08/01/migrating-the-content-library-between-distribution-points-in-sccm-2012-sp1.aspx

Distribution Point Migration

Hello,
I have 1 primary and 100 secondary site (each secondary having MP and DP role installed). I want to migrate CM2012 share distribution point for 100 secondary site. I have few question in that.
1.Currently all the secondary contain : more than 250 packages in SMSPKG$ folder and DATAACCESS shared folder. If I convert to shared DP and attach cm2012..How distribution point works. Should I need to distribute 250 package to the shared one or it will
copy the package from SMSPKG$ folder and store in content lib, or should I redistribute the package to shared DP's?
2.Once I convert the share DP it losses 2007 primary communication?
3.what about the DATAACCESS folder once migrate share DP.. still use old one?

Hi,
1. The conversion process will convert all Migrated packages to the new contentlibrary no need to redistribute them.
2. Yes
3. From TechNet :
http://technet.microsoft.com/en-us/library/gg712275.aspx
"The upgrade process creates a copy of the migrated content that is stored on the distribution point, and then converts this copy to the single instance content store. When Configuration Manager converts a package to the single instance content store, it
deletes that package from the SMSPKG share on the distribution point computer unless the package has one or more advertisements that are configured to
Run program from distribution point. "
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Migration from Distribution Point within an SCCM2012 SP1 environment

Similar Messages

Maybe you are looking for