Minimal Information not there

Hello, I've been trying out Workstation Inventory in our test lan and
I just about have it going. The only problem I'm having right now is
Minimal Information is not showing up in Workstation Object. I am
interested in the inventory of course but the main thing I'm shooting
for right now is to touch the workstations once so I can use WUOL
Viewing WS object properties, ZenWorks inventory tab:
Minimal information shows NO information
Click More information reveals scan was successful with fully
populated w/ Hardware, Software etc..
Scan Status reports nothing (bad)
C:\Winnt\Temp\Zenerrors.log reveals:ZENWorks 5 Inventory Status Log
File.

Ganesh thanks for replying and the pertinent link. You are correct
sir, I finally realized that -608 was a NDS errorcode. So a followed a trail
of TIDs 10013712 and 10054738 that implied that I may have missing
attributes in the schema, when I checked the Workstation Class in the ConsoleOne
Schema manager I did have some Zen:Inv attributes missing. Those TID's
recommended further that I try extending the schema manually, which I
did and got a Time not synchronized error, which suggested the schema had
future time stamps which I verified I had with DSBrowse. The CTS's
were thirty years in the future. So then another TID 10068425 suggested I
declare a new schema epoch which I did per TID 10066252 which fixed
the timestamps. (We had declared a new epoch a while back to fix a
future time problem so this was no shocker, but we had never declared a new
schema epoch)
I reinstalled Zfd3.2, and zfd 3.2 SP1 and recieved no schema update
errors in the log file, which I had been having a problem with, but was
thinking the errors were "normal" if zfd had been installed once and the schema
had been already extended. Anyhoo, after installation, I checked the
schema and it had indeed been extended.
After that Minimal Info was inserted into the NDS Workstation Objects
and all is golden. Well, except for the WUOL feature which works, but only
if the ACPI WOL setting is set to Power On (Its apparently Stay Off by fault...) so now I need to figure out a way to change the WOL
setting for 400 systems. This BIOS (Intel board) has two WOL settings one
which is on by default, but is apparently ignored if shutdown by an ACPI OS,
and then the one in the ACPI section which is off by default. Doh!
Thanks again.
Michael

Similar Messages

  • ZfD 6.5 Inventory - Minimal Information not filled .

    Hey Guys,
    we're running ZfD 6.5 on approx 1000 clients, most of them with client32 and several with a Middle Tier server. Inventory is running fine, but the last days I recognized that new registred (MT-connected) clients dont fill the minimal information fields in eDirectory. Inventory information in the database is fine, but no minimal information there. Weird ..
    Any ideas, thoughts ?
    Thanks in advance,
    Thorsten

    trittschack,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • When I save in my contacts, i Don´t have problem but the other day the information not there, any know what happen, when I save in my contacts, i Don´t have problem but the other day the information not there, any know what happen

    when I save my contacts I don´t have problem, but the other day the information the contact isn´t there
    any know some answer?

    Not all content types are available in all countries - in each country Apple can only sell what they are licensed to (and in some cases what a country's laws allows them to). A list of what is available where is shown on this page : http://support.apple.com/kb/TS3599
    Do you have access to other music and film purchase download sites ?

  • I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software.  I could not install it.  Where do I go from here?

    I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software.  I could not install it.  Where do I go from here?

    Photoshop 4.0 is not compatible with MAC 10.9.3 . You will face issues as when Photoshop 4.0 was launched there was no MAC Mavericks and Adobe has not tested the version on new MAC OS.
    If you want you can download the latest version of Photoshop CC 2014 and you can use it as a trial for 30 days and you can plan to switch to the latest version.
    http://www.adobe.com/products/photoshop.html

  • Search finds information in notes but when I open the note it's not there.  Where is it?

    I have just upgraded to iOS6 and synced before doing so.  Now my notes are old ones from the computer and new additions not there.  If I search for them on the front screen they are referenced but not on note when I use link.  How do I get back notes and how do I stop this happening on a sync. (Notes are kept in Outlook)

    You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

  • After having downloaded my e-book ADE gives the information that there is not a connection with internet. What is the problem? Liejaat.

    After having downloaded my e-book, Adobe Digital Edition gives me the information  that there is no connection with internet.Who can help me with this problem? Liejaa.Adobe Digital Editions

    I've never seen this error in the context of trying to connect via ODP.NET or ODT.
    If you have Oracle Dev Tools for Visual Studio installed, you can try to create a connection to the database using Server Explorer. If this works, that means your ODP.NET connection is just fine.
    If you don't have VS or the tools, another thing you can try is connecting through ODP.NET using a simple OracleConnection.Open. Make sure you have your client set up to connect to the DB server.
    Here's some info about connecting to the DB:
    http://download.oracle.com/docs/html/B28089_01/featConnecting.htm#sthref101

  • MP3 song information not retained after iTunes 7.0 - ID3 tags at fault?

    I'm having some strange problems with track information in iTunes. I first noticed it when I tried to copy some mp3's from my Mac to my mobile phone: certain tracks did not retain the song information, like artist, album etc., while others did.
    A similar problem has been discussed in this post:
    http://discussions.apple.com/thread.jspa?messageID=3698498
    However, my problem seems to be a little bit more specific.
    If I look at the music in my library in iTunes, all the track information is there. However, for MP3's encoded after 16th October last year, the "Imported With" field, using Get Info, is shown as "Unknown". Before this date, it is shown as "iTunes v7.0". For all MP3's the ID3 version is v2.2.
    I believe that I must have upgraded to iTunes 7.0.1 around this time, since I have a number of Apple Lossless audio files which have also been imported and don't show this problem.
    The main problem is with the file ID3 tag information (I think). If I select one of the problem tracks, find the original file, open it up in Quicktime and "Get Info", no track/album/artist/composer information is displayed. This is NOT true for 1) MP3's encoded before 16th October 2006 and 2) Apple Lossless files encoded at any time.
    In other words, the track information for songs encoded with iTunes 7.0.1 and later is either encoded in a way that no other application can read, OR is only being stored in the iTunes playlist, NOT the file itself. I can see all the track information for these problem files on my iPod, but NOT my mobile phone (where I have to manually copy them over), even if I drag and drop them directly from iTunes.
    I have this problem with Quicktime, my mobile phone music player and RealPlayer, so I'm assuming it's "system wide". It even occurs if I copy a problem file out of my music folder and onto the the Desktop, then manually add the track to iTunes: all the song information has disappeared.
    I have all my music stored on an external hard disk - 160GB Freecom ToughDrive formatted as HFS+. Previously it was stored on an external disk formatted as FAT32, but copying the files over to the new disk didn't change the problem.
    I considered using the "convert ID3 tags" option to see if it would make a difference, but both the good and bad files are listed as using v2.2. I also don't understand enough about them to feel confident converting them to something different - perhaps to v2.3 or v2.4 - just to see if it makes a difference.
    Any information on how to "recover" the missing information (for anything other than iTunes) would be greatly appreciated!
    MacBook Pro 17" 2.16 GHz 2GB RAM   Mac OS X (10.4.9)   iTunes 7.1.1

    Okay, some more information as I try and track down the source of the problem.
    By using an id3 tag editing program - ID3 Editor - I was able to view the song information for each track, even though all the other music players I had tried would not show it. If I then chose to modify and update the ID3 information, this would somehow modify the tags in such a way that they become readable in all other programs.
    I tried using the "Convert ID3" tags option in iTunes, just on a whim, but without any success. Saving the song information in ID3 Editor doesn't change the version of the ID3 tag - it's still listed as v2.2 in iTunes - but it DOES make it readable in other programs. I also tried the various text conversion options, again without any success.
    This looks to me like a bug in iTunes. While its possible for me to get around it, in an extremely long winded way, I still can't understand why iTunes would be writing ID3 information that other Apple programs cannot read.
    Any suggestions? Should I be posting this question in a different forum perhaps?

  • Why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

    why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

    Hi there ethangabe,
    You may find the information in the article below helpful.
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    http://support.apple.com/kb/ht2589
    -Griff W. 

  • ERROR: 'Sky Go unable to load program information as there is no Internet connection'

    I was using Sky Go via my iPad and a T-Mobile hot spot generator (Hauwei) to watch programs whilst in my caravan in Devon. Suddenly it stopped working and I now whenever I try and use Sky Go I get the message 'Sky Go unable to load program information as there is no Internet connection'. Obviously I am connected. I have tried reinstalling Sky Go and have completely rebooted the iPad but to no effect. Why has it suddenly stopped working???
    Having returned home I have tried to connect again when the ipad is connected via my BTHomeHub2 but I still get the same message, I have also tried to use BBC iPlayer and I am getting the same error message. What has happened????

    nikhildhoot wrote:
    When the router has an internet connection, the phones automatically connect to the router flawlessly. When there is no internet connection, we get a notification saying "Wi-Fi Connection Limited"
    The limited WiFi Connection issue when there is a good internet connection, is a known issue in the OS releases in the past six months, and has been corrected as far as I can tell on the most recent 10.2.1.3xxx or higher OS.
    But, I would note that when your router has no internet connection, you should expect to get that notification... no internet connection > limited wifi connection.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can i remove my credit card from app store, the none option its not there and i don't Owen  nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

    How can i remove my credit card from app store, the none option its not there and i don't Owen  nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

    You've logged into your account and viewed your purchase history and there aren't any error messages shown (e.g. 'problem with a previous purchase'), and you haven't got any purchases due (e.g. pre-orders and/or subscriptions) : Why can’t I select None when I edit my Apple ID payment information ?

  • Just bought a new computer and downloaded itunes again and when I log in all my old music is not there.  I created a new playlist but it won't sinq to iphone without erasing all my other songs.

    I just bought a new computer and set it up.  Downloaded itunes again and logged in; however, all of my old content is not there.  I just created a new playlist and want to sinq it to my phone but get a message saying it will delete all of my old songs.  Please help

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • Database upgrade from 7.5 to 7.6.0.12 - AK Catalog information not found:00

    I just upgraded a database to 7.6.0.12. The catalog of the upgraded database is corrupt for one user. When I try to view the triggers defined for the user I get this message :
    General error;-9205 POS(1) System error: AK Catalog information not found:0000000000000000007200
    SELECT * FROM "DOMAIN"."TRIGGERS"
    All other entities, tables, sequences, procs appear to be valid. Another user's entities are all present and correct, including triggers.
    How can I repair the catalog to allow me to recreate the missing triggers?

    Hi again Joe,
    with the help of the vtrace you provided, we found out the TABID of the involved table: 0x000000000000051E
    We now need to find out which table it is:
    SELECT SCHEMANAME, TABLENAME FROM TABLES WHERE TABLEID = x'000000000000051E'
    After finding out the relevant table, there are two options:
    1. delete the triggers for this table
    or
    2. copy the table in a new table, delete the old table and rename the new table to the old table:
    CREATE TABLE <schema>.<new_table> AS SELECT * FROM <schema>.<old_table>
    DROP TABLE <schema>.<old_table>
    RENAME TABLE <schema>.<new_table> TO <schema>.<old_table>
    This all (point 1 AND 2) should preferably be done within a transaction, so it can be rollbacked, should anything go wrong.
    Please note that in point 2 that all given privileges, defined views and indexes no longer apply or exist, these have to be regiven/recreated.
    It might thus be a good idea to check if there are views defined using the table <schema>.<old_table> BEFORE following the steps of point 2.
    Regards,
    Roland

  • IN MY IPHONE 5 FACE TIME IS NOT THERE HOW CAN I DOWNLOAD AND USE IN DUBAI

    IN MY IPHONE 5 FACE TIME IS NOT THERE HOW CAN I DOWNLOAD AND USE IN DUBAI
    <Personal Information Edited by Host>

    An iPhone originating from the UAE will never have FaceTime.
    (113483)

  • I have a ! before most of the tracks in my library, they were not there before. When I click on the ! it says 'could not be used because the original file could not be found. Would you like to locate it?

    I have a ! before most of the tracks in my library, they were not there before. When I click on the ! it says 'could not be used because the original file could not be found. Would you like to locate it?

    Also see here for more help and information: iTunes: Finding lost media and downloads
    B-rock

  • Exchange user information not updating from AD

    I just recently updated Job Titles, Location, and Phone numbers for users in Active directory. For some reason
    not all of the information is be transferred to Exchange. I noticed this because it isn't updating in the GAL either. I went to Exchange Management console and the information isn't there either. I look at AD on that same machine and it's all there. What would
    be causing Exchange not to sync this information. How can I check to see what is broken. I'm not really know how this is supposed to work.

    First off, Exchange has no directory information of its own - all directory information that it has, it gets from the Windows Active Directory.  It will hold permission information for a time period, but no other directory settings are saved automatically. 
    So if you are changing things in the Active Directory and you aren't seeing it in Exchange, there are two possible reasons:  1) what you are changing in AD isn't the same as what you think you are changing in Exchange, and 2) your Exchange system is reading
    from one domain controller and you are making the changes while connected to another (and directory replication hasn't completed).  In order to check for #1, you say you changed the fields above - what do you see if you change those same fields on the
    Exchange system?  Do this on one test account, then open the account in ADSIEdit to see what all of the fields are set to.  If the reason is #2, wait 15 minutes and see if the information is updated.
    As for Exchange not updating the GAL, the GAL is taken straight from the Windows Active Directory in real time, so we're back to #1 and #2 above - for the most part.  However, the Offline Address Book that you see in Outlook is only updated (by default)
    late at night and downloaded when Outlook is first opened the next day.  So if you are checking for changes in Outlook, Outlook will use the Offline Address Book by default, but you can force it to check with the online address list on a case-by-case
    basis by changing the address list.  So make sure you are selecting one of the non-default address lists to find the information, not the default.

Maybe you are looking for

  • HP Desjet 2540 problem Wireless printer, printer is connected but does not print from pc

    I wanted to install my HP Deskjet 2540 printer, the installation went quickly, the printer is installed wirelessly.. but I can't print. I can print from my tablet to the printer. But ofcourse I also need to print from my pc > printer. I already used

  • How to have real time data in a lookup or how to update a lookup once it has been created?

    Hi, I have created a lookup from an existing table and am using it to match incoming data. I would like to refresh the lookup once  a day. Is this possible. If yes how do I go about it? Regards Prabha

  • 2 Users Sharing one Music Library

    All, We have our iTunes Music Library on Shared Documents\Shared Music. XP "User A" can access and see all the songs. For XP "User B" we did: iTunes, From the File menu, choose Add Folder to Library (Shared Documents\Shared Music\iTunes\iTunes Music)

  • Export data with where condition

    Hello, I am doing an export using exp utility in oracle. exp fas/fas@fdbl file=aud log=aud.log parfile=exp Contents of parfile - exp compress=n indexes=n constraints=n grants=n triggers=n statistics=none consistent=y query=\"where org_grp_i=33 \" I a

  • OKI C6100

    Hello all, I just got the OKI C6100 and have it hooked up through the network OS X is finding the printer and i am able to install it however its only printing in black and white. Anyone know how to fix this? Thanks