Minimum Configuration for infrasturture+ form

Dear Friends,
What is minimun configuration is required to install infrastructure and FORMS both on same machine.
With regards
Siddharth Singh

You need at least an i/o Board, a System board, a CPU module, 8Dimms, Scsci Disk, a power-supply.

Similar Messages

  • Sharepoint 2013 : Server was unable to process request. --- Site is not configured for Claims Forms Authentication.

    In our java web application trying  establish the connection for sharePoint 2013
    using  Windows claims authentication (NTLM ), I am getting error message "Server was unable to process request. ---> Site is not configured for Claims Forms Authentication". But In the Sharepoint 2013 our Site is is configured for Windows
    claims only.
    In the Sharepoint 2013 server in the IIS manager settings for authentication it is  enabled for both Windows claims and Forms authentication,
    but if I disable Forms authentication that I will be able to connect it through my application but with the direct access i.e., by running the URL in the browser I am not able to connect getting error message "sorry this site has not been shared with
    you" in the browser  Kindly help me on this.

    Hi,
    This issue is always caused that you had missed FBA configuration in web config of your web application.
    You can configure the FBA authentication then check whether it works.
    http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
    http://chrisbarba.com/2013/07/16/sharepoint-2013-forms-based-authentication-fba/
    more reference:
    http://stackoverflow.com/questions/5686378/sharepoint-2010-claim-base-authentication-error
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d82dcd4-0e57-4de5-81bc-60ffc3cb9a9f/sharepoint-2010-claim-authentication-and-authenticationasmx?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Site is not configured for Claims Forms Authentication

    Hi All
    I have one custom login page for my Sharepoint 2013 site where i am trying to use
    SPClaimsUtility.AuthenticateFormsUser(uri, strUserName, strPwd);
    But i am getting this exception ---> Site is not configured for Claims Forms Authentication
    I checked ULS long and there it is --> Not in claims forms auth for url 'https://domain/sitecollection/'.
    Web.config enteries are 
    <authentication mode="Forms">
          <forms loginUrl="/_layouts/TarsForwardLogin.aspx" />
        </authentication>
    <membership defaultProvider="i">
          <providers>
            <add name="i" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthMembershipProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
            <add name="membership" type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" connectionUsername="cn=sharepointadmin,ou=GSP,ou=Applications,o=TOYOTA"
    connectionPassword="spad1n2" server="10.100.5.119" port="389" useSSL="false" userDNAttribute="entryDN" userNameAttribute="cn" userContainer="o=toyota" userObjectClass="Inetorgperson"
    userFilter="(ObjectClass=Inetorgperson)" scope="Subtree" otherRequiredUserAttributes="sn,givenname,cn,fullname,language,mail" enablePasswordReset="false" enablePasswordRetrieval="false" passwordFormat="Clear"
    requiresQuestionAndAnswer="false" requiresUniqueEmail="false" />
          </providers>
        </membership>
        <roleManager defaultProvider="c" enabled="true" cacheRolesInCookie="false">
          <providers>
            <add name="c" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthRoleProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
     <add name="rolemanager" connectionUsername="cn=sharepointadmin,ou=GSP,ou=Applications,o=TOYOTA" connectionPassword="spad1n2" type="Microsoft.Office.Server.Security.LDAPRoleProvider, Microsoft.Office.Server, Version=15.0.0.0,
    Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="10.100.5.119" port="389" useSSL="false" groupContainer="ou=groups,ou=GSP,ou=Applications,o=toyota" groupNameAttribute="cn" groupMemberAttribute="member"
    userContainer="o=toyota" userNameAttribute="cn" userDNAttribute="entryDN" dnAttribute="entryDN" groupFilter="(ObjectClass=groupOfNames)" userFilter="(ObjectClass=Inetorgperson)" scope="Subtree"
    />     
    </providers>
        </roleManager>
    Can
    someone please help/Guide
    Manoj Gangwar | Sharepoint MCPD | Sharepoint MCTS |

    Hi All
    I tried like this and it worked...
    SPIisSettings iisSettings = SPContext.Current.Site.WebApplication.IisSettings[SPUrlZone.Internet];
    SPFormsAuthenticationProvider formsClaimsAuthenticationProvider = iisSettings.FormsClaimsAuthenticationProvider;
    SecurityToken token = SPSecurityContext.SecurityTokenForFormsAuthentication(new Uri(SPContext.Current.Web.Url),
    formsClaimsAuthenticationProvider.MembershipProvider, formsClaimsAuthenticationProvider.RoleProvider, strUserName, "", SPFormsAuthenticationOption.PersistentSignInRequest);
    if (null != token)
    base.EstablishSessionWithToken(token, SPSessionTokenWriteType.WriteSessionCookie);
    base.RedirectToSuccessUrl();
    Manoj Gangwar | Sharepoint MCPD | Sharepoint MCTS |

  • Minimum Configuration for SDM.

    Hi I would like to know what is the minimum configuration for access by sdm my router with volares manufactured, is a 877. Greetings

    Your 877 device is sufficent . Make sure you are using IOS 12.3(8)YI or 12.4(2)T or later releases .
    More info:Cisco Router and Security Device Manager Introduction
    http://www.cisco.com/en/US/products/sw/secursw/ps5318/tsd_products_support_series_home.html

  • Minimum configuration for Sap FICO Installation

    Hi,
    I am new to SAP, can any one helpme out in providing the info for installing the SAP FI CO (Minimum configuration for FI CO Installation).
    Can SAP be installed on XP-Pro or is it mandatory that it should be installed only on Windows Server 2000 or 2003.
    your early response wopuld be highly appreciated.
    Thanks & Regards
    Pavan

    This link will provide the best practice config document on FI.
    http://help.sap.com/bp_bblibrary/600/html/V03_newBB_EN_US.htm

  • Minimum Configuration for E4500

    Hi,
    Can someone tell me what is a minimum configuration for E4500.
    I am looking for # of CPU/Memory Board,
    PCM, I/O Board, and Power Supply.
    Thanks
    Raj

    You need at least an i/o Board, a System board, a CPU module, 8Dimms, Scsci Disk, a power-supply.

  • Bare minimum configuration for warehouse management

    Hello,
    For one of our Projects, there is a requirement of Warehouse Management merely just to enable the tracking of Material received to the Storage Bin level, as they manage the Inventory in Storage Bins in the existing Warehouses.
    Other no major requirement is expected from WM like, automation of Putaway, etc.
    Few of the Inventory scenarios are like Goods receipt, Goods Issue, Warehouse to Warehouse transfer, Bin to Bin transfer, Physical Inventory,  Subcontracting for repairs, Vendor Consignment, also they will handle Project Special stock.
    Now the configurations for Inventory Management are enabled for all the above processes. I now need to know, what are the bare mimimum configurations required so as to enable the WM related process, following each of the IM processes, like Putaway after Goods Receipt, Stock removal before Goods Issue, etc.
    The Configuration for the Enterprise Structure to support Warehouse Management have been completed by creating the Warehouses & assigning the Storage locations to these Warehouses.
    A detailed step by step process would be very helpful for me at this stage.
    And i surely will assign points for all the useful answers.
    Regards,
    Zafar.

    Hi,
    If you want to define new storage types other than the standard ones, please define them. Otherwise, you can assign
    the existing storage types to the newly defined warehouse.
    Also you have to define storage bin types and storage bin structures.
    All this you can find under the IMG path:
    SPRO->Logistics Execution->Warehouse Management->Master Data.
    Regards,
    Pavani.

  • Webutil configuration for jre, Forms 10g in windows 7 application server

    hi all,
    we are recently upgraded the application server with new os windows7. and clients ae also upgraded with windows7.
    we are using forms 10g(developer suite 10g). and installed jre6 instead of jinitiator and did the all needful changes in formsweb.cfg. and ialready installed ofiice-2003(for excel)
    but we are unable to run reports in excel format*. while we select the repotr type is exel in list item
    and click ok button the following error is coming
    oracle.forms.webutil.ole ole functions bean not found
    client_ole2.create_obj will not work.
    =====================
    the following is the webutil configuration in formsweb.cfg
    =====================
    [webutil]
    archive=frmall.jar,frmwebutil.jar,jacob.jar
    archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar
    #,f90all_jinit.jar
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=basejpi.htm
    baseHTMLjpi=webutiljpi.htm
    baseHTML=webutilbase.htm
    #baseHTML=webutiljpi.htm
    lookAndFeel=Oracle
    if any changes in the configuration and jre files.please mention it.
    kindly help me how to resolve this problem
    thank you
    Edited by: vamsi on 3 Jan, 2012 12:59 AM
    Edited by: vamsi on 3 Jan, 2012 1:21 AM
    Edited by: vamsi on 3 Jan, 2012 1:21 AM

    See my comments in this post:
    java.lang.ClassNotFoundException: oracle.forms.webutil.ole.OleFunctions
    and this one:
    webutil.cfg for win-7 64 bit client

  • Minimum configuration for localstorage=false nodes

    We have a grid that provides data for multiple clients. Considering that the client is started with localstorage=false, and all requests are passed to the data nodes, what is the minimum cache-configuration that is required by the clients to participate in the cluster.
    Edited by: tfanshteyn on Jul 31, 2009 6:54 AM

    It is alright to have the following scheme defined in storage-enabled member:
    <distributed-scheme>
    <scheme-name>app-scheme-1</scheme-name>
    <service-name>DistributedScheme1</service-name>
    <backup-count>1</backup-count>
    <backing-map-scheme>
    <read-write-backing-map-scheme>
    <internal-cache-scheme>
    <local-scheme>
    </local-scheme>
    </internal-cache-scheme>
    <cachestore-scheme>
    <scheme-name>jdbc</scheme-name>
    <class-scheme>
    <class-name>misc.MyCacheStore</class-name>
    </class-scheme>
    </cachestore-scheme>
    <write-delay-seconds>{delay 5}</write-delay-seconds>
    </read-write-backing-map-scheme>
    </backing-map-scheme>
    <autostart>true</autostart>
    </distributed-scheme>
    and client (storage-disabled) with:
    <distributed-scheme>
    <scheme-name>app-scheme-1</scheme-name>
    <service-name>DistributedScheme1</service-name>
    <autostart>true</autostart>
    </distributed-scheme>
    But as Aleks has mentioned in the previous reply it is much easier to manage and distribute single cache configuration even though there a quite a few configs that can be different. Any "data" specific settings like CacheStore will only trigger where that Entry is, so on a localstorage=false nodes these settings are not required. But keep in mind as the applications grow managing multiple cache configurations can become quite problematic.

  • Minimum configuration for osx server?

    I am getting a MacBook to add to an all-windows environment and want to use time capsule for backup.  in addition, I'd like to run iTunes on a system so I was thinking about hitting eBay for a used mini that would be used for backup and media streaming. What is the minimum specs from a memory and CPU standpoint should I look for?  Currently I have a windows server and  NAS and have ~20 years of tech experience, but all on the windows, netware and x86 side.

    Mac OS X supports up to 10 Users for File Sharing, so if all you need is File Sharing, the complexity of Server is not needed.
    If you have another reason for requiring Server, its requirements are similar to Mac OS X of a similar version. Server is an I/O problem, so fast drives are needed, and a little bit more RAM than a "regular" desktop system. In Mavericks, running Server on a Mac used as a regular workstation is NOT recommended.

  • How to configure output for adobe forms in sap,,if i want to pront  an invo

    Hi,
    I used adobe forms in GTS.
    BUt in normal SAP system,i want to use adobe form to print an invoice data.
    I wantt o use the standard form and standard interface for that.
    But how to do configuration for this?
    normally for smartforms we do it in NACE transdaction?
    But for this adobe forms what is the driver program,,where to configure this form and interface.
    Thanks in advance,
    sasi

    Hello,
    it is the same way how you will configure for smart forms.
    Standard driver program is : RLB_INVOICE
    Please go through this link, how to configure print forms for invoice.
    http://****************/Tips/SmartForms/NACE/Configuration.htm
    Edited by: rakhi966 on Sep 9, 2011 9:22 PM

  • Error while configuring credential for Adobe Forms

    Hi,
    While configuring Credential i am getting an error as popup. But when I click on OK, I am able to see the .pfx file in the top.
    <b>Error Details:</b>
    An error occurred while updating the credential expiry for alias 'ReaderRights':
    com.adobe.service.sap.configuration.ConfigurationException:Unable to load keystore from credential. Please ensure the password is correct.
    We have not received any password from SAP, only there was one password to download the file.
    After all I am trying print forms, not an interactive form. But when I deploy and run it shows error.
    <b>Error Details:</b>
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
    Request start time: Sat Nov 26 11:54:53 GMT+05:30 2005
    com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_1015779131\DM8997397967410486296.dir\DM-8285166541278556430.tmp
    Specific error information:
    $$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0
    GeneralError: Operation failed.
    SecurityHandler.login:-1:
    Could not open Digital ID file with the password provided. Please try again.
    Please suggest the solution.
    Thanks,
    SA.

    Hi,
    Still I have not got any solution for this. But my bigest problem right now is, I am using print form and there is no interactive feature. There is lot of forum posts where it is specified that, credentials is not required for print forms..... But when I try to deploy the Adobe application I get below error....
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
    Request start time: Thu Nov 24 20:00:50 GMT+05:30 2005
    com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_1015779131\DM400443135109740914.dir\DM-4094495003961307306.tmp
    Specific error information:
    $$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0
    GeneralError: Operation failed.
    SecurityHandler.login:-1:
    Could not open Digital ID file with the password provided. Please try again.
    General error information:
    IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0
    Please suggest....
    Thanks.
    SA

  • Installing and Configuring Adobe Document Services For Print Forms

    Hi,
    I want to use Adobe Document Services,for Print Forms Scenario,on ABAP side.
    I installed the Adobe document Services following the steps in the Installation Guide.I obtained the Credentials file and supplied it during installation.
    Then i followed the steps in the configuration Guide,except for the SSL connection part, as i have chosen Basic Authentication .
    The Web Service is running and on opening the home page,when i test the method rpData,it asks for Username and password,when i supply my username password it says, user does not have rights to method rpData.
    I even tried using J2ee Admin rights,user with SAP_ALL rights, and ADS_AGENT.
    When i test the service from ABAP side,using the RFC destination i created on Client 400,from where i want to use it, the test shows status code OK.
    When i test a form through transaction SFP,it asks for  USERNAME and password,which i tried as my USERID,ADMIN ID with SAP_ALL rights, even with the users i created during Configuration like ADS_AGENT, ADSUser etc.
    Our J2ee Engine is installed on Client 200,i installed the ADS on Client 200 and created the users ADS_AGENt(service user with role SAP_BC_FP_ICF) and ADSuser on Client 200.
    I also activated the ICF services and created the destination for the destination service using Visual Administrator.
    My Issues:
    1)To test the Webservice,what USER ID password needs to be supplied?Do i need some Special role or rights?
    2)During Configuration ,when i create a USer in SAP Web AS ABAP for Basic Authetication,after creating ADSCallers Role and assigning to ADSUSer ,in Visual Administrator,after selecting com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar ,under ADSCallers,i ama ble to see the both the users ADSUser(user in j2ee Engine for basic authentication ), and ADSUSER (user type system in ABAP),are visible,
    When try to add ADSUSEr by choosing ADD,from USER Tree , it doesn't do so.So i Added the ADScallers group instead,thus indirectly both users added.Can this be a Problem?
    3)What else do i need to do?Am i missing something?
    Please help.
    Regards,
    Siddhartha

    Hi all,
    I am having an issue in which my ecc could not use properly the ADS on the EP.
    I could properly execute FP_PDF_TEST_00 from se38 transaction which gives the correct version no of ADS.  Also I am able to get the correct version no by giving username and password at http://<J2EE_host>:<J2EE_port>/AdobeDocumentServices/Config  which seems like the ADS is working properly in EP.
    However when the abaper is trying to run his form using spf like ZFORM_VENDOR  it is showing error like
    " Error during activation Message no. EU837 "
    Can you please shed some light on what all steps I need to check to ensure that ADS is working properly ?

  • Problem with Configuration of GP for Adobe Forms

    Hi,
    I following the guide 'Configuration of GP for Adobe Forms' (from Configuration of GP for Adobe Forms )
    When i try to configure 'Web Service Clients' in the visual administrator:
    Configure this parameters:
    - Destination URL SLD
    - Authentication BASIC
    - User
    - Password
    but the frame with this parameters:
    -- System Name
    -- WS Name
    -- WS Port
    don´t show.
    I think it is an error in swing because the title 'System Landscape Synchronization' show but the scrollbar stop there.
    Features:
    Netweaver 04s
    Visual administrator 7 SP 9 java version 1.4.2_09
    Thank you in advance
    with Regards, Mariano

    Hi,
    please check out this link it might help you
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
    **********please reward points if the information is helpful to you***************

  • How to run a silent configuration for Forms and Reports 11g ?

    Hi all,
    I've run a silent installation for Oracle Forms and Reports 11g R2 in Windows 7 64 bit.
    I made it using a response file called install_only.rsp. Now I want to run the configuration also in silent mode.
    How can I do it ?
    I know that I can use a template called configure_only.rsp. However, i don't know what is the correct syntax for the command to start configuration.
    Should I use the same setup.exe installer and inform configure_only.rsp as response file ?
    The command below is the appropriate command for this task:
    setup.exe -silent -response configure_only.rsp
    Or is there another way to be followed?
    Thanks a lot.

    Alright, I eventually found the answer.
    Configuration must be run from directory on windows.
    Command is shown below:
    <FORMS_HOME>/bin/config.bat -silent -response <path-to-response-file>

Maybe you are looking for