Minimum gurantee PMIN
Hi Experts,
We have to set a minimum gurantee condition in a way that, if the net value calculated in a sales order is less than the minimum value then the minimum vaule should be charged in the sales order.
E.g If Calculated Net Value < Minimum value : Then the Minimum value becomes the Net value
If Calculated Net Value > Minimum value : Then the Net value is unchanged
The problem is there is a condition PMIN which is for Minimum gurantee but it is calculated per unit but cant be used for the comparing the Net value for the total quantity.
E.g quantity 10 @ 5:00 USD per unit = 50(Net value)
and let say the Minimum gurantee is 55, the system should add up the less 5 in the net value
But ti use PMIN we have to set PMIN as 5.5 per unit so that its 55
But we need a condition so that it checks the 55 against the total net value.
Please suggest if there is any standard offering for the same.
Thanks
Montee
Hi Montee,
Is this minimum guarantee condition material specific?
I suggest just maintain a condition type which would hold the minimum guarantee value in its condition record and insert a routine in the procedure against the net value row which would just compare the calculated net value with that condition value and pick up whichever is greater.
You can maintain this condition on a general access sequence where the routine can search for.
Regards
Kaizad
Similar Messages
-
Minimum Gurantee and Sales based rent conditions
Hi RE-FX experts,
We have a scenario wherein from a given physical rental object, we sell two
different categories of Products. We have seperate Minimum Guranteed
Rent conditions for the two and different Sales Based rent %age share.
In RE-FX Contract, we can not assign same condition type (Minimum
Guranteed rent/Sales Based rent) twice to the same rental object for
the same period.
Kindly suggest if this can be handled through RE-FX.
Pankaj WadhwaHi Experts,
I have a business case wherein One Rental Object has been leased out to a Customer and the Customer is selling two categories of products from the Rental Object. This is a Sales relevant contract.
The Customer is paying different Minimum Guranteed rent for the two Product categories (e.g. Product category A: Minimum Guranteed Rent: 10000 and Product category B: Minimum guranteed rent: 25000).
The Customer has different revenue share for both the Product categories viz Revenue share % for Product category A: 20% and Revenue share %age for Product Category B: 30%.
How can we make a RE Contract like this in the system..
I am trying to create such a contract wherein i have created two reporting rules for the two Product categories and Sales rules as well with the relevant revenue share %age. I am trying to enter Minimum Guranteed rent Condition in the Contract for both the Product Categories seperately since the values are different(10000 & 25000) and the revenue share %age are also different.
But since the conditions are assigned to the Rental Object and as per the design of SAP RE-FX, we can not assign the same condition(Minimum Guranteed Rent here) to same Rental Object for the same period, i am getting stuck.
Can anyone help me on this problem.
Thanx in advance,
Pankaj Wadhwa -
Problem in creating a sales document
Hi,,
I am creating a sales document programatically by the FM BAPI_SALESDOCU_CREATEFROMDATA1 for tht i have desigend ny selection screen in tht my requirement is i will not give item category for tht i have to quiery for given material and for given plant i have to fetch itcat plz help me in writing this quiery
vbap table is not coreect as it will store data after complettion of sales document
but here i want quiery to create a sales document it self
i have seen in transaction VA01 ity is getting data from t184 for itcat plz help me in writing this quiery
for good answer i will reward pointsYou can use the t.code SHD0, choose your transaction variant here, further choose your screen variant.
Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry make the necessary changes and save.
The system will prompt to assign a package and request enter the necessary values.
Your issue is sorted!!
And further to your query for minimum price PMIN refer to my answer, you will not have to maintain any condition record or the price entered here does not reflect in any other document.
Regards,
PATHIK -
Help Needed in mapping business scenario
Hi All,
I have a RM inter unit despatches for this we are using STO. While doing inter unit despatches we have to pay freight on per kg (Gross Weight) for a source and destination. This has already been mapped by creating a condition type and condition record.
But there is a scenario where in when inter unit despatches happens there is an agreement b/w transporter and company if the company does not load full truck then the company needs to pay a minimum amount which has been negotiated with the transporter in this case, the freight condition is not being payed only minimum gurantee amount is payed to the transporter.
Could any of us help me in mapping only the minimum gurantee scenario in R/3.
We are using STO to do inter unit despatches.
Regards,
Sreekanthhai
i think u can use condition type AMIW -
Hw to select the disply mode fields
HI
TO ALL
I have a problem When we creating sales document type vov8 in the fieks DISPLY RANGE if we want selected fields, hw to select theose fields?
give me step by stem answer i will give u full reward marks
ADVANCED THANX TO ALLYou can use the t.code SHD0, choose your transaction variant here, further choose your screen variant.
Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry make the necessary changes and save.
The system will prompt to assign a package and request enter the necessary values.
Your issue is sorted!!
And further to your query for minimum price PMIN refer to my answer, you will not have to maintain any condition record or the price entered here does not reflect in any other document.
Regards,
PATHIK -
Deposit amount and Billlater based on conditions
Hi Experts,
We have a scenario, where in we have to Collect DEPOSIT AMOUNT from the Customer as per a agreement.
And when ever the agreement is breached, we have to create a Sales Order-Billing to charge the Customer.This should also reduce the Deposited Amount.
How can this be achieved through SAP? Please suggest.
I am aware about the Billing plan, Minimum gurantee procedure and Conracts But will it suit to the Requirement.
Thanks
Monteehi
this is to inform you that its a tough scenario because deposits deals in FI - AR and customer is related to SD.
let me explain this with an example:
from customer A - deposit collected is 1000/- which will be posted into deposit G/L account as per the payment agreement with the customer.
if customer pays as per norms of agreement no probem up to that time but problem comes when it is breached.
create a new type of service or quantity contract for that and it has to be used for this purpose name it as CBQC because contracts will not have schedule lines and it will base on sales order to bill it.
create a seperate pricing procedure and assign in such a way that it has to be applicable for all the customers and in pricing procedure maintain specially created account cey and assign the same in RAD to deposit G/L account and reduce the balance or deposit or debit the deposit and the same amount should credit to our account
hope its clear basing on your requriment.
please chec in the system and update the same to forum
regards
balajia -
Condition type PMIN Minimum Price for material
Hello
We have a requirement where we need to maintain minimum price of material in master.
Whenever in sales order price is entered and is lower than minium price for material maintained it should automatically add the difference as surcharge. If the price maintained is more than the minimum price maintained it should not do anything.
I guess we have to use Ctype PMIN for this. I amy using this condition type have created a condition record and maintained a minimum price for this material f09 as rs 1000
Now when i am creating sales order price picked up from pricing condition record for that customer is 500 . Now it should automatically add Rs 500 in condition line item for condition type PMIN.
What is happening is it is showing me my base price as 500 and it is adding PMIN as 1000 to the base price and showing total base price as 1500
If price maintained in pricing condition record is more than 1000 for ex 1200 even then too it is adding PMIN as 1000 and showing total base price as 2200.
Please let me know what am i missing...
Regards
SANJEEV-T code VK11 - Maintain condition records - You can use the upper and lower limits functionality in the condition records for those specific materials.
-Also Make this condition type as mandatory then check it out.
Regards -
Minimum order value for Purchase orders
Hello,
This is my requirement: -
A condition type needs to be created for Minimum Oder Value for PO. If the PO value is say, 450 and the condition record in 500, the PO value must be adjusted to 500. If PO value is 550, then it remains 550.
1. Condition records must be maintained.
2. Must be calculated on whole PO (all items) and then redistributed among items in a suitable ratio.
This is what I have already tried:-
1. Vendor master - No use maintain minimum order value as PO price must be adjusted through condition types.
2. Tried replicating PMIN condition type and it works but only at item level - this calculation must take place at header level. Also it works only for calculation type "Quantity".
Please suggest how this can be implemented, hopefully through configuration only.Hi,
Please use user exit MM06E005 and code accordingly. Take help of ABAPer.
thanks and regards
Murugesan -
16.10.2007
Hi friends,
Other than PMIN is there any other way by which I can enter the minimum price of a material and check the same while creating sales documents.
Regards,
Udaynath.Hi Uday,
If condition records are maintained for this price, a lower limit and an upper limit can be set in the condition record.
But if this price is entered manually, then one way to check is through a requirement / routine. Maintain the minimum price as a lower limit in a dummy condition record and in the custom requirement / routine compare the value entered by user (available during runtime) with the lower limit maintained in condition master. For an unacceptable value, deactivate the condition type by setting SY-SUBRC to 4 if its a requirement. If its a routine, simply overwrite the condition value with the lower limit so that everytime user changes it to a lower value, it gets overwritten by the minimum price.
Please award points if you find it useful.
Cheers,
KC -
hi
all of u
i have a problem in minimum selling pricing in repairing project it is very urgent my client want to maintain minimum price <b><u>with out maintain any record</u></b>
if any body will give they r getting more pointsHi Kadali,
Ex you have a sels order line item and the PR00 is 100. But I want to sell this material at 95 only then In Item conditions of sales order just enter PN00 and enter 95. system will deactivate the Orginal PR00 and take the price as 95 which is entered by you as in PN00.
YOU MAY CREATE MINIMUM PRICE FOR A MATERIAL USING CONDITION TYPE PMIN
Ex:
ITEM M1 1PIECE
PR00 PRICE 1600
K007 CUST DIST 160-
PMIN MINIMUM PRICE 60
NET ITEM VALUE 1500
PMIN is entered as 1500 in Sales order Item level. Then the Orinial value which is 1440 is deactivated and the new Minimum price will be taken as 1500 and the difference between orginal order value and the new order value entered is taken as PMIN value an displayed in sales order item condition as 60.
Hope this is clear
REWARD IF IT HELPS
Regards
Srini -
Please explain me the usage of PMIN condition type.
VenkatThis minimum price condition type will be used if we want to have a specific minimum price no matter what the price after the discounts provided are deducted.
Following Settings are required:
Include this condition types along with price condition types.
Make it Automatic entry means it is not manual.
Give Requirement as 2 -> Item with Pricing.
Give AltCty as 15 -> Minimum Price.
Give Acct. Key as ERL.
Example
A company has defined minimum prices for materials. When a material is sold, it should not be sold for a price below the predefined minimum price. When pricing is done for a sales document line item, if the net price of the item falls below the minimum, the system should automatically compute a surcharge to bring the price up to the minimum price. To accomplish this, the user would define the minimum prices using the condition type PMIN. PMIN would be defined in the pricing procedure and condition value formula '15' would be assigned. Using the formula, the system compares the minimum price with the net price calculated to that point in the pricing procedure. If the minimum price is not met, the system computes the necessary surcharge and assigns it to the PMIN condition line.
Regards
AK
Reward points if helpful -
Owb error while edit a mapping:the minimum length of this field is 1
after creating a mapping,an error always occur when i attemp to
edit it just as add a mapping table,the error description is:
the minimum length of this field is 1 and its maximum length is
15,You have 19 characters.
can some one help me?thanksHi Vidyanand,
Did you create the runtime access user using the runtime assistant? Did you select the correct runtime repository (if you have more) to associate your runtime access user with?
Note that there are 4 database roles being created when you create a runtime repository owner:
- OWB_A_<runtime repository owner>
- OWB_D_<runtime repository owner>
- OWB_R_<runtime repository owner>
- OWB_U_<runtime repository owner>
If you would grant those roles to a user, then that user becomes an access user for the user with username <runtime repository owner>.
Note that you can also use the runtime repository credentials to connect to the runtime repository for deployment purposes, but you may not want that because of security concerns.
Thanks,
Mark. -
Adobe CS3 Windows 7 installation says does not meet minimum requirements
I am trying to install Adobe Creative Suite 3 Design Premium on a brand new Windows 7 machine (32-bit). It is a downloaded copy from Adobe's website.
When I start the install process, it takes me to the "Options" Screen and will not let me install Photoshop, Illustrator, or InDesign. All those options are grayed out.
At the bottom, the reason it gives is as follows:
"The minimum system requirements listed below needed to run adobe photoshop cs3 are required and are not met:
- Windows XP (Service Pack 2)
- Windows Vista"
It gives the same error for the other 2 programs as well.
I have tried the following troubleshooting steps already with no luck:
1. Run Setup.exe as Administrator
2. Run Setup.exe in compatibility mode (either as Windows XP SP2, or Windows Vista)
3. Logged-in to Administrator profile and tried installing from there
4. did the regsvr32 on both vbscript.dll and jscript.dll.
5. Tried the CS3 cleanup tool at multiple levels.
6. Made sure there are no other Adobe products installed
7. Called Adobe Tech support, they are no help. They said to re-install the OS, which doesn't make any sense since it's a clean install.
No AV installed yet, so that's not the issue either.
Any ideas?I realise I'm a bit late to the party here.. but after spending a few hours going through the Adobe CS3 Bootstrapper and Install process and files, I have the answer to why Windows 7 does not meet the minimum requirements.
The answer is in the xml files contained in the payloads for the CS3 Installation.
Line 72786 of AdobeIllustrator13en_US.proxy.xml :
<SystemRequirementsJSON>[
{"OS":{"Windows":{"XP":{"Exclude":true,"Require":{"MinServicePack":"2","@servicePack64Bit" :1
,"Need64Bit":"0"}},"Server2003":{"Exclude":true},"Vista":{"Require":true}}},
"Memory":{"System":{"Default":{"Require":"512","Exclude":"500"}}},
"Display":{"Default":{"Require":{"Width":"1024","Height":"768"},"Exclude":{"Width":"800"," Height":"600"}}}
]</SystemRequirementsJSON>
Basically it is this: For Adobe Illustrator CS3 the following is supported: Windows XP SP2, or Vista ONLY
Not Windows XP SP2 or above, or Windows XP SP2 and Vista or above ...
The same is in several other files, but not all. Illustrator and InDesign are the 2 that I know of.
I have 500 odd machines that I need to deploy this software to.
If Adobe would like to offer a work around with consideration to deploying the software silently via Microsoft SMS to 500 Windows 7 Workstations - I would be most grateful.
My rage at software installer developers with such little foresight is only tempered by the knowledge that the task itself is so difficult.
However, that does not excuse the lack of thought given to how enterprise level administrators are supposed to deal with updates, patches, and deployments to machines where users have limited rights, and the difficulty that is caused by the inclusion of unhelpful and sparse documentation and software (such as Adobe Updater). -
When i open iphoto and the zoom is near the minimum, I can see all the photos, but when I move it towards the maximum range, the pictures disappear. If I click on them I only see a blank, black screen.
Someone help???Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Displaying the name of a minimum value in crosstab
Hi,
we have a crosstab with [Job Number] in the left column, [Quantitiy Break] as the column headers and (min[bid value]) as the measure.
We want to display the name of the [vendor] who gave the minimum bid alongside the measure in the crosstab.
we have tried allsorts of formula along the lines of:
=[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row])))
=[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row] ForEach ([Job Number]))))
=[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row] ForEach ([Job Number];[Quantity Break]))))
etc
can anyone help?
thanks very much
KeithYou could try the method I use to pull this back from the database in one go...
Create an object
start with bidvalue (aggregated on the right level, formatted as string,
make sure you use leading zeroes and room enough for the highest possible value)
and concatenate the vendor after that.
Now use right(min(new object);lenght(new object)-length bidvalue string)
(might have tweak a bit to get the exact vendor part of the string, this is from the top of my head,
but no doubt you'll get it to work)
This will find the combination with the minimum bidvalue, but only return the vendor part.
Hope this helps,
Marianne
Maybe you are looking for
-
I've had my BT mac mouse for almost 1 year now. At first, it worked just fine. Then, it started losing connection, and I would have to go to Set up Bluetooth Device on the little BT icon on my menu bar in order to get it to re-pair with the computer.
-
Can I open bkf with my Mac Pro? I have my old files with bkf format how can I open it?
-
SQL performance difference in application an in SQL Server
We are using Visual Studio 2010 and SQL Server 2012. We insert into the database using the stored procedure InsertData. When I timed in the program how long it takes to execute stored procedure InsertData, it takes more than 10 ms per insert. But, ou
-
Selection of Distribution Rule in Incoming and Outgoing Payment
There is an option of selecting the distribution rule in Incoming and Outgoing Payment having transaction of Account type but the requirement is of having the selection of distribution rule having transaction of Customer and Vendor (Invoice wise and
-
Print an email with the "to:" field?
I get emails from my kids band teacher - and the email is sent to about 200 people. When I print the emails it puts all those email address at the top (the whole to: from: lines, etc.). Is there anyway, using Apple Mail, to only print the body of the