MIR7 Park an not GR'd document with line item reference

Hi I have also left this message in the MM forum.
Scenario 1 is how the system currently works, scenario 2 is what we want to achieve, so Parked, unreciepted document but would like the line item details to appear in MIR7 so we an trace it and report against it and ask user to post a GR easier ......
Important point on both is the PO is not receipted as the user has forgot to do it!
1. PO gets created
2. Invoice comes in
3. AP clerk does MIRO enters PO number gets a message no selectable item.
3. AP clerk switch to parking and parks docuement
4. Display parked invoice we can see the PO number but no line item details
Here are the steps we want to happen Step 4 is different
1. PO gets created
2. Invoice comes in
3. AP clerk does MIRO enters PO number gets a message no selectable item.
3. AP clerk switch to parking and parks docuement
4. Display parked invoice we WANT to see the PO number AND the line item details
Is there possible a BAPI we can use to achieve this or any ideas on development that might be required or can it be achieved via configuration?
Thanks for any help!

this can happen if any freight or packaging condition value was present while GR but deleted or altered befire the cancellation of document.. pl check in MSEg for amount in LC and delivery costs.

Similar Messages

How to reverse a FI document with line item that is cleared

Dear All,
I have similar problem like the previous post here:
https://forums.sdn.sap.com/click.jspa?searchID=6017563&messageID=3142217
the difference is, the document was posted several months before.
In March, there is 2 vendor document with 3 item, say 100001 and 100002.
the document 100001 is false and changed with 100002 but 100001 is not reversed.
In April, item 3 of document 100001 is cleared with document 200001.
this is wrong because the cleared item should be in document 100002.
this problem is known in October.
How do we fix this problem?
Thank you All.
Regards,
Fatah.

Hi,
Use <b>Tr. Code: FBRA</b> give document number if you want reset then click on reset or if you want reverse the click reverse.
this solution is sufficient for you problem.

How to reverse a FI document with line item that is cleared and archived.

Hi all,
Appreciate your help on this.
I have a FI document, say 1000001 with 3 line items.
line 1 and 3 is open. line 2 is cleared by document 1000002.
1000002 is subsequently being archived.
Now, is there any way to reverse document 1000001?
I can no longer do a FBRA (reverse and reset) since 1000002 is already archived.
Please help!
Thank you,
Lai San

Hi Lai San,
Dont know whether this helps.. but just a thought....
i came across a note regarding reversal of an SD document when the corresponding FI document was already archived.. reversal was not working due to a program error (SAP note 410590). does the FI doc reversal also work on lines with SD doc reversal? (iam a layman here ) maybe u can consult SAP?
Regards,
Naveen

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability.

Could not retrieve the document with the passed obsolete token.

Hi,
Issue is with the specific report not able to execute when the query is cancelled and getting an error when you are cancelling an already executing query.
Receiving an error message during running one of our report in the
following way:
- Run the Webi report
- Select the value for 8 prompts
- Click on cancel
- try to re-run by clicking on re-fresh and receive an error message.
The error message is the following:
"Could not retrieve the document with the passed obsolete token (Error: RWI 00323) (Error: INF)"
Till now we have made the following changes:
This might be caused by a storage token that identifies a document state, which is no longer available in the storage tokens stack.
In the webi.properties file, increased the value of storage tokens stack size.
1. Edit the webi.properties file found in the following location:
u2022 <Installed dir>\program files\businessobjects\BOenterprise115\Web services\en\dsws_webservice_boe\data\asemble\dsewsBobjJava\src\WEB-INF\classes\webi.properties.
2. Add or change the following variables:
u2022 WID_FAILOVER_SIZE (This sets the maximum number of tokens to keep in memory. It is 10 by default.)
u2022 WID_STORAGE_TOKEN_STACK_SIZE (this sets the maximum number of tokens stored on disk. It is 10 by default.)
u2022 Deleted cookies.
u2022 Add the Java Runtime Parameter value from following path:
Start - > Control Panel-> Java -> Java Applet Runtime Settings
Click on View.
Add the Java runtime Parameter value: Xmx200.
It is not a machine specific issue however it is intermittent.
Please advice.
Regards,
Pradnya Kokil

Hi Pradnya,
Following solutions might help you to resolve the issue.
Solution1:
To achieve optimum performance, the developer should limit the number of new windows that can be opened using the OpenDocument function, particularly if using it within the drill function.
If you must open a new window each time, you can increase the number of document instances available on the system by modifying parameters in the webi.properties file:
1. On the Business Objects server, navigate to the following directory:
C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes
2. Open the webi.properties file using a text editor.
3. Uncomment the FAILOVER_SIZE=10 line by removing the # from the beginning of the line.
4. After FAILOVER_SIZE, add the following:
STORAGE_TOKEN_STACK_SIZE=40
5. Save the file.
6. Restart the application server
Solution2:
Do not use Control Key + N or File New from Browser for invoking new instance of Browser
Avoid opening Infoview by Hyperlinks.
Alternatively, by setting logontoken.enabled property in web.xml for desktop.war, will stop users allowing using old token
Locate web.xml file in desktop.war file deployed on your application server
Locate the following string in web.xml:<param-name>logontoken.enabled</param-name>
Change the <param-value> for logontoken.enabled from true to false (forexample, <param-value>false</param-value>)
Save and close the file
Restart the web application server to apply the changes
Regards,
Sarbhjeet Kaur

Acrobat Pro XI Will Not Print Word Document with a Rotated Table

I have a MS Word document that is mostly text, but include a table that has been rotated in a text box to fit on the page. When I try to print to PDF using Acrobat Pro XI, the document crashes at the page the table is on.
I have tried several attempts to print using the Acrobat Printer, convert to PDF feature and trying to print just the page alone. Acrobat will simply not print word document with a rotated table.
Any idea how to fix this?
Word 2013, Windows 7, Acrobat Pro XI 11.0.06

In the full document, the print to PDF goes only as far as the table, then ends - not printing the table. The remaining pages are not printed.
For example, I have trimmed the file down to just the table page, and included links to it, and a copy of the PDF it generated.
https://dl.dropboxusercontent.com/u/60543835/Forums/Table%20Sample_140903.docx
https://dl.dropboxusercontent.com/u/60543835/Forums/Table%20Sample_140903.pdf
The error message I now get when I try to print is: "There is not enough memory or disk space to repaginate or print this document."
However, with the Task manager open, the memory never seems to get above half of the available (the graph bar fluctuates a little, but stays stable")
The page prints to a regular HP or Xerox printer with no problems.

GL account with line items in line type 'S' document split?

Hi Experts,
We found in PCP0 there are payroll documents which has GL account with with line items in line type 'S' document split. Unlike other line items with line type 'blank' these line items cannot be opened and display the wage type details. How can we know from which wage type these line items were created?
Regards,
Allan

These line items are caused by company transfer and they are cleared by themselves between companies.

The vendor code is not coming against some Assignment line items with the

Hi All,
While executing t.code FBL3N,the vendor code is not coming against some Assignment line items with the GL A/C4607000, some line items it is coming.
The GL A/c 4607000 is GR/IR clearing a/c.
Please let us know why this situation is happeing at the time of FBL3N.
Thanks
Ram

HI,
By activating the special fields you can the vendor number, but use the new reprot called "FAGLL03 - Display/Change Items (New) ".
First go to SPRO> Financial Accounting (New)> General Ledger Accounting (New)--> Master Data > G/L Accounts>Line Items --> Define Special Fields for Line Item Display
Click on New Entries -
Table - BSEG - Field - LIFNR
Save. Now execute the report - FAGLL03 - Display/Change Items (New)
Give the gl account number and execute.
After getting the line items list from menu select --Settings --> Special Fields --> Click on New Entries --> Enter Table BSEG, Field Name LIFNR.
After this come back and execute again. It will give you the vendor number.
Thanks & Regards,
Shashi Kanth.

IDoc message Document or line item does not exist for invoice reference

Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, Jan

This is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias

Create delivery document for line item 5 only manually

Hi Sap Experts,
We have scenario, we have created sales order with 10 line items while creating delivery we don’t want to show all the 10 line item to delivery creator (creating delivery manually).
We will send him mail saying that create delivery document for line item 5 and we will provide him material number and delivery date and shipping point with sales order number.
We don’t want to use partial delivery option that split the delivery and we don’t want to use VL10C tcode also.
What are options we have and how to customize this scenario?
Kindly suggest.
Regards,
Kotli

Can you be clear in your requirement?
One requirement is user should not select line items other than the one instructed to them
The other requirement is delivery split should happen based on item category
If your requirement is first one, you need to go with user exit USEREXIT_MOVE_FIELD_TO_LIPS in include MV50AFZ1 but I am not sure, on what logic, coding to be included in this exit. If your requirement is second one, then just try in your system and share the outcome how system is functioning. You will come to know how standard SAP works.
G. Lakshmipathi

Customer/Vendor A/C with line item details and with opening and closing Bal

Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balances

Hello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah

MIRO - Business Area not getting updated in Vendor Line item

Hello friends,
I am posting Vendor invoice in MIRO transaction.
After Posting if i see the financial document generated,
Business area has not got updated in Vendor Line item.
What could be the problem ?
Please help me out.
Hari Prasath

Hi Kale,
Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
On the other hand, have a look to the note and kba below:
41294 - Business area in customer/vendor item
Kba 1727802 - Business area not getting populated in sales/ purchase tax

One pr for multiple materials with line items while running mrp

Hi SAP gurus,
              I am config the system for MRP as per my client requerement.
                 We use CBP for different RAW materialsfor example they having a 10 materials for planning,were,
         MRP type is VB,
          LOT size is FX,with Different Reorder points and fix order quantity for all materials,
         My client whant run MRP for all these materials in single time that means they whant multiple item at single levels,
        i soles these requirement with the help of Product Group(sop) and its working but when we running md02 for product group all materials have planed and they give different purchase requistion numbers for all these materials but my client Wants single purchase requistion with line items for all these materials.
     Pls give me the solution for that requirement.
thanks and Regards,
abhi

this is not the way SAPs MRP run works.
Where is the benefit for this?
the requisitions are not even split into header and item table, it is just one table EBAN, and either way you would get exact the same number of records in EBAN.

Provision that MRP is not be considered for specific line item of Sales Ord

Is their any provision that MRP is not be considered for specific line item of Sales Order in MRP run? (Ex: Planned order is also generated for free/ADC sample quantity entered in Sales order)

Dear
Go to Sales and distribution--> Sales --> Sales Documents -->Schedule Lines --> Assign schedule line categories.
Choose the item category (eg. TAN) which is coming in the sales order and enter CN - No. Mat. Planning in the the manual schedule line category (MSL Ca) for MRP type PD.
This will enable you to choose while creating sales order in the Tab procurement column SL Ca.
Choose CN - No mat.planning for the schedule items which you don;t want MRP.
Regards
Soundar

Condition type not getting populated at first line item of Sales order

Hi Experts,
We are creating Sales order through IDOC(Inbound function: IDOC_INPUT_ORDERS) for Document type ZXX then condition type is geeting populated at both line item, i have tried creating the Sales order through IDOC for document type ZYY the condition type is not getting populated in first line item, but for secod line item condition is getting populated.
we also checked pricing procedures related to this document types and we found these pricing types are mentioned in corresponding pricing procedures.
Let us know there are any other possible ways to find the same
please help.
Thanks!

Hi Rajani,
check the user exit in the FM..IDOC_INPUT_ORDERS
check if any filters kept for condition type field..
check the belwo user eixuts
ORDCHG I VEDB0001 Sales Ord. Change
ORDERS I VEDA0001 Sales Orders..
Regards,
Prabhudas

MIR7 Park an not GR'd document with line item reference

Similar Messages

Maybe you are looking for