MIRO - DUTY and Handling Charges

Hi there,
I have to do an invoice receipt against an import PO.
I have duties and handling changes which were not originally mentioned in the PO.
GR is done
How do i account for this information (duty and handling charges) in the Invoice Receipt MIRO transaction?
This information needs to be captured in the respective accrual accounts.
If my PO is for 100 USD, my invoice total amount would be 100 which will result in the following accounting entries
   DR - GR/IR =    100
   CR - Vendor = - 100
I should also have the following entries,
CR Duty Accrual - 20 USD
CR Handling Charge Accrual - 30 USD
How do i handle this scenario?
Thanks
Bala

Hi,
   If the question is pertaining to import duties in India use the following:
JCV1-IN CVD
JECV-Edu Cess on CVD
J1CV-Sec ECess On CVD
JCDB-Basic customs Duty
JEDB-ECess Basic Customs
JSDB-Sec ECess on BCD
JCDS-IN Special customs
JADC-Additional Duty
These all import conditions are delivery cost in nature and need to have accural key.
Only the planned conditions means that are part of PO get settled in GR and LIV, rest becomes the unplanned in nature.
Delivery cost conditions cannot entered once the PO is created.
Regards
Rajesh

Similar Messages

  • Inaccurate Shipping and Handling Charge for New FIOS Quantum Gateway Router

    I ordered the new Quantum Gateway Router under the special promotion (reduced price of $99.99. The website specifically said in the ad that "your new router will have a shipping and handling charge of $5.99". When I placed the order the shipping and handling charge was $9.99 ($5.00 more that advertised. Has anyone else had this problem?

    I think everyone who has ordered this router has seen this issue.
    Have you tried calling Verizon?
    Good Luck.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Set seperate handling charges for perishable's and non-perishables at checkout

    I've run into a problem trying to set up some appropiate handling charges on two different types of products: Perishables and non perishables.
    I've tried setting it up through categories in the shipping options, which works great up until I try to purchase both a non perishable and a perishable product at the same time. When I have both these items in my cart, no valid shipping option is given. (probably because I set the categories handling charges to exclude the other category as I dont want it as a shipping option if customers only purchase perishables or non-perishables, and it is shown to customers as an option when its set up in this manner!)
    Example:
    Perishables hold a $12.00 handing charge per order, non perishables hold a $6.00 handing charge per order. If I set up shippng options for only Non-parishables by excluding any Parishable category, and do the same for Parishables by excluding any Non-parishable category, im not given any valid shipping option when my cart contains both of these. My question is, how can I set it up so when my cart contains both of these types, there is a desired shipping option (while at the same time not including this option if the customer only purchases all perishables OR all non perishables)
    My apologizes if this comes off as confusing, I've been up for a while now trying to get this to work! Any help or direction would be appreciated.

    I noticed a somewhat similar question just now which contains no workable answer, argh! Ill leave this open for a little while but will move it to the code section if no answers are submitted as the only workable theory I have come to involves javascript.

  • Excise duty packing and forwarding charges

    All SAP Gurus,
    I want to calculate excise duty on the basis of basic amount + packing and forwarding charges, but system is calculating excise duty only on basic amount.
    What is needed to be done.
    Regards,

    Hi,
    Create Packing and Forwarding Chagres before Excise Duty as a Discount condition (in M/06) and add after Basic Price and get subtotal as Net value (in M/08) which will be Basic + P&F charges bef ED. System will take this as base for Excise calculation.
    For e.g.
    PR00 (Base Price) = 100 INR
    ZPFC (P&F charges bef ED) = +10 INR
    Net Value (Base for ED) = 110 INR
    System will calculate BED @ 14% on 110.

  • How do i calculate 10%(handling charge) and  5%(vat )

    Please i need help on how to calculate 10%(handling charge) and  5%(vat ) of a sub-total on my form. A step-by-step will help a lot. I have attached the form also.

    I simply added the Formcalc script to the calculate event of the Handling Fee and the Grand Total. Note that your 2nd subtotal field is called FederalTax ...nit sure if that is what you intended.
    Paul

  • MIRO Deselect and select Multiple line items

    Hi All,
    At the time of miro we are taking the reference of PO. In PO we have 1200 lines related to Custom duty, additional custom duty, ecess, clearing and forwarding charges and freight.
    we want to do the MIRO for custom duty, additional duty and freight only, for these we have 600 line items. we need to select these lines one by one. this is time taking job.
    can any body tell me that how we can select these line at once.
    Regards all

    Hi,
    You can make use of Planned Delivery cost in the PO Refernce Tab. This will cover all other costs other than you basic material or service cost.
    Regards,
    amit

  • Freight & Handling charges in IV

    Dear all,
    Can we maintain freight, Handling charges and also cash discount during Invoice Verification i.e MIRO. If so, how?
    How to capture this for accounting purpose.
    Regards
    Sushil

    Hi Sushil,
    Yes you can add any condition during invoice verification in MIRO.
    After entering a PO number in MIRO click on PO references tab & scroll right, you will get one icon of Edit own condition.
    Click on Edit own condition & add your conditions(freight, Handling charges)
    Hope it will help you.
    Regards,
    Manish Agarwal
    Don’t forget to give point if useful ans

  • Handling charges Imports

    Dear All,
    Here my client want the handlich charges only for calculation purpose only.
    So i made that condn type in pricing procedure as statistical, removed acc key & accrual key.
    And in condn type i removed condn category B-delivery cost.
    But after MIRO(customs) and J1IEX, when i post MIGO, this handling charges of 1% is posting to Material cost.
    I removed vendor also from condn type in PO.
    Regds,
    CB

    Hi,
    Create/Change your condition type as follows  go to M/06
    Condition Type - ZHCI ( Handling charges Imports)
    Access seq. - Blank
    Plus/minus - Blank
    Under Control data 1;
    Cond. class   A (Discount or Surcharge)
    Calculat.type B (Fixed amount) or A (Percentage)
    Cond.category Blank
    Mark as "Item Condition" or "header" as per requirement
    And save.
    Use it in MM calculation schema (in M/08) and mark it as "Statistical"
    Now try to create a PO

  • Delivery based Customs Duty and Freight

    Hi Experts,
    Scenario : Import Procurement
    PO is raised for Import procurement. In general case we mention Customs duty and freight either at header condition or at item condition. But what in case I receive partial material from multiple PO in single delivery? How can I book and load the duty and freight value on material. Also there may be a chance that the other partial quantity can be procured against advance license and no duty will be paid.

    Hi,
    If multiple PO is in single BOE, you can add multiple PO in MIRO assignment tab, by clicking "More allocation criteria". Enter the Quantity (partial or full as per delivery) and amount for all conditions of delivered materials, as per the bill of entry (it may or may not be same as amount in PO).
    In case of advanced license where there is no duties, you should not put the delivery cost conditions in PO.
    Regards,
    Sudeep.

  • Excise Duty on packing Charge

    Dear Experts,
    I am using Sap 2007 PL 11,One of my customer wants the Excise duty on packing charge ..
    Tell me solution ,
    Schenario is :
    Item A1  = 35700
    Item A2  = 65500
                   101200
    Packing  = 2024
    Subtotal = 103224
    Excise   = 8258
    cess     = 165
    Ecess   = 83
    Subtotal = 111730
    Cst 2

    Add packing charges and base amount and enter it in assesable value,
    Create excise tax formula accordingly.
    Also check this link
    Cenvat on Packing Charges
    Jeyakanthan
    Edited by: Jeyakanthan A on Aug 6, 2009 3:24 PM

  • VZW sucks, after overcharging me for four months they issued a credit and then charged me for that credit the following month and 2 cost service reps and one supv can't figure out why...THEY SUCK

    Does anyone else find it odd VZW starts every conversation with the standard "this call may be recorded" line, but if you imply you are recording them, they freak out and go silent.  It's amazing they never want to stand by what they say.  I was overcharged and basically screwed for four months, they then issues me a credit and then CHARGED me for that credit the following month.  I explained it in their second grade terms so they could understand and still NO ONE gets it.
    RIDICULOUS

    Grothka wrote:
    First, can you elaborate a bit on what the concern with the credits are? It is really hard to give advice about the scenario without really knowing what is happening. #2: I don't find it odd at all that vzw wants to record their calls but not have customers record them. In fact I can't imagine that any medium-large company (or many small companies either) would be comfortable with their rep's being recorded seeing as they could make mistakes or just decide to not be appropriate. VZW records their calls for 'quality and training purposes.' Meaning that they are doing it in an attempt to improve their customer service internally, and if it means that they can go back and listen to a call to see if a rep made a mistake then that is just gravy. In most cases if a call is listened to and it's found that the rep did lie or make a mistake it will be corrected and handled internall. If, however, a customer records a call there is a pretty good chance that they will blast it all over the world and damage vzw's reputation... this is a problem if vzw would have fixed the issue anyways once they had a chance to listen to the call.
    Thats interesting. Sounds like a fairy tale but interesting.

  • Unplanned delivery , packing and carriage charges

    Hi ,
    We have a scenario where at the time of GRN we do not know the planned , packaging and carriage charges . This has to be accounted for during invoice posting .
    Kindly advise how to do the same. I need to be guided tab and field wise in invoice posting .
    Regards
    Nandini

    You can do this in two ways
    1) You can post the amount in "unplanned delivery cost" field of MIRO.  For doing this u need to assign GL account in OBYC
    or
    2) You can activate GL account tab for MIRO and then post the amount against a GL account in this tab.  This tab will come at item-level once it is activated
    hope this resolves ur problem

  • Allocation of stores handling charges.

    Hi All,
    I am working on a project in utility company and they have stores handling charges to be applied. Stores handling fees are charged to a clearing project and end of the month based on the value of item the handling charges need to be distributed from clearing project to other projects. The rules are complex. Like certain items are exempt of these charges. They want to keep a cap also on item cost like if an item is over certain amount like 20k then that item is charged only for 20k. Then when a return happens they want to charge stores handling fees again on return transactions. The clearing project should be completely cleared out end of the month as well. How can this be accomplished...Allocations...Burden...? please reply with your ideas...Thanks
    Philip.

    Hi
    Burden will not be practical solution.
    You may need to analyze the allocation process.
    I think you might need to use a client extension to calculate the basis. It is not clear where do you maintain the quanty or amounts of the receiving projects. You might need to maintain a DFF or UDA on the project and populate there the allocation basis amount of each project, taking into account the exempt items and those with caps. After populating the DFF with the equivalent items amounts, you could run the allocation process prorating the source amount (from the clearing project) to the targets projects based on the calculated amounts on the DFF.
    Dina

  • I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    After restoring to factory settings/new iPod you will then have to restore from backup
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I recently downloaded a  bunch of songs an ringtones from Itunes on my phone. I synced up the phone to my computer to back up the files and to charge it and afterward all the new music and ringtones are gone?! Checked iTunes and they're not there either!

    I recently downloaded a bunch of songs and ringtones to my iPhone 4 and when I synced my phone to my computer to back up the files and to charge the phones the ringtones and songs were gone. They disappeared from my phone and from my iTunes as well. I checked my my iTunes for downloadable items and there was nothing there. I went onto iTunes and tried to download the same things that I had previously and when I did it said I had already downloaded them? iTunes only gave me the option to purchase the music and ringtones again.  Does this happen often or is there something wrong with the software on my iPhone?

    Hi,
    Did you have the music in your iTunes library on your computer when you signed up for match? How did you transfer the music from you iPhone to your computer? Do you have a back up.
    Jim

Maybe you are looking for

  • Error while selecting planning app in Business Rules

    Hi , I am not being able to select the planning outline while developing business rules (but I can select the Essbase Outline). Whenever I expand the Planning node, an error pops up the details of which says "Error connecting to Essbase server machin

  • How to connect apple tv to older tv's through dvd player?

    Is there a way to connect the apple tv to an older tv through a dvd player or just to the tv? thx

  • First day of previous month

    Hi, I created a data parameter and I want my date parameter default value to be the first day of previous month, the expression {$FIRST_DAY_OF_MONTH()$} is pointing to the fitst day of current month and when I tried {$FIRST_DAY_OF_MONTH()-1$} it is j

  • Searching for a monitor icc profile for a Satellite M60-139

    i'm a grafic-designer useing a Satellite M60-139 - and therefor i need a color-profile for my Satellite M60-139-display - has anybody an idea where from i can get one?

  • Cat-proof iMac stand?

    My mom just got a new 24" iMac. It's been sitting in the box, unopened, for the past 2 days. (She's scared the cat might knock it over.) Is there any kind of 3rd party add-on for the stand that can be secured to the desk, or something that significan