MIRO: Multiple plants exist in the same invoice

Hi,
We are posting the MIRO against a Purchase Order.
There are two line items in a PO.
Both line items have different plants.
We have posted separate Goods Receipts for both the line items.
Now, at the time of posting MIRO system is giving an error message as 'Multiple plants exist in the same invoice (Message no. 8I820).
Please guide, what can be done?
Regards,

Hello
Seems to be Message 8I 820 configured with reference to the Excise postings.
Since both the Plants having different Excise registration, Requesting you to post two separate invoices.
warm regards
Ramakrishna

Similar Messages

Multiple Plants in MIRO - Multiple plants exist in the same invoice

Dear All,
When i am doing the invoice processing in MIRO, eventhough i have not entered the PO number, with the basic details like Invoice date, posting date, Amount , currency and Invoicing party, the system issues an error message "Multiple plants exist in the same invoice". Could you please anyone suggest me what is the real issue and route cause for this error.
Many Thanks,
Panneer

Hi,
Please check SAP Note 1571695 - 8I820 error message in MIRO transaction for the same.
Summary
Symptom
In MIRO transaction, during invoice verification, system prompts an error message as "Multiple plants exist in the same invoice".
This error will be prompted in scenarios where service tax is applicable and multiple plants exists in the same invoice.
Other terms
Transaction MIRO , BADI J_1I_MM_SER_CAT_DETERMINE, 8I820, 820, multiple plants, plant, error, MR11, BAPI, FI.
Reason and Prerequisites
Program error.
Solution
Apply the code corrections present in the Note.
Regards,
Sandesh Sawant

Multiple plants exist in the same invoice - Error

Dear All,
When i am doing the invoice processing in MIRO, eventhough i have not entered the PO number, with the basic details like Invoice date, posting date, Amount , currency and Invoicing party, the system issues an error message "Multiple plants exist in the same invoice". Could you please anyone suggest me what is the real issue and route cause for this error.
Many Thanks,
Panneer

Hi,
firstly try to search the forum. It was asked before already.
You may check SAP Note 1571695, maybe it's your case.
Regards

Multiple Incoming Payments for the same Invoice

My client has an unusual situation. They are running SAP B1 version 8.8. They receive multiple incoming checks for payment against the same invoice. They receive them each month, so this is not a situation where they receive installments against the same invoice. They want to enter the multiple checks into one Payment Means document, but when they start a new row, the Due Date increments to the next month. This will cause them to change the date on all but the first row in the Payment Means form. Is there a way to prevent the Due Date from incrementing to the next month?

Gordon,
Does FMS mean formated search? My client has to enter several checks for payment against one invoice each month, so this will be a common occurrence. I assume you are suggesting creating a formatted search that would place the current date into the Due Date field when the row is updated. Correct?

SCD - source sets where multiple changes exist for the same natural key

I am using the Oracle SCD type2 method (end date old record and insert the new record) which was working fine until my source set contained multiple changes for the same natural key. Does anyone know of a way to handle this?
Thanks

Hello,
I think, the way of handling multiply changes of NK is totally depend on business requirements for your project.
There could be number of approaches for this. For example:
- all changes but the last are considered active during one day, going subsequently right after previously existed SCD record;
- all changes but the last are considered active depending on its occurrence within fact data (as far as you consider NK change based on some attribute set - probably some of attributes show themselves within fact data)
- etc.
So, make an agreement upon this with your customer and ETL design decision will follow immediately.
Sergey

Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO

Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO#, Date, ect.)

When you say field, do you mean specifically a form field, such as a text field? Or is the information regular text on the page?

Same material can exist on multiple line items for the same order.

Hi
Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
Regards

No.
But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
Eawar Ram
http://www.parxlns.com

How to permit multiple workspaces to access the same schema?

Hello,
When creating a new workspace (version 3.2), I am getting the following warnings:
"Warning: The requested schema already exists. Warning: The requested schema is already assigned to one or more workspaces. Please ensure that giving multiple workspaces access to the same schema is permitted by the security policies at your site before approving this request."
How do I "ensure that giving multiple workspaces access to the same schema is permitted"?
What are the advantages/disadvantages of doing so?
Thanks,
Gabor

The correct answer to it would have been: I use manual provisioning.I didn't ask a detailed enough question. What I am wondering is how you are set up to to workspace provisioning at your site. In apex_admin, if you navigate to Home>Manage Service>Instance Settings there is a radio group like:
Provisioning Status:
0 Manual - An administrator manually creates each workspace
0 Request - Link displayed on login page enabling users to request workspaces
0 Email Verification - Workspace created after email address is verified by the user
The help text for this is:
Provisioning Status:
Determines how the process of provisioning (or creating) a workspace works for your development instance. Options include:
    * Manual - An Application Express administrator manually creates new workspaces and notifies the Workspace administrator of the login information.
    * Request - Users request workspaces directly in a self-service fashion. Selecting this option displays a link on the Login page enabling users to request a workspace. When a user requests a workspace, each request is submitted to a queue for approval.
    * Email Verification - Works similar to Request except each user receives an initial email containing a link. Clicking this link validates the user's email address before the request is processed.
Note: To enable users to request a workspace using a link on the Login page, you must choose Request or Email Verification. If you select Manual, no link appears on the login page.How is yours set up?
As to the first original question (How do I "ensure that giving multiple workspaces access to the same schema is permitted"?), I still do not know.Whether it is permitted or not is a decision made by the apex site administrator who approves/declines workspace requests. Whether it ought to be permitted is a different question and is really same as your second question which involves issues you said you are now starting to understand better. So I think we've covered your original questions. If not, please elaborate.
As to the last subject (How did the hidden workspace get created and how do I get rid of id? What happens if I don't?), this happened at work, so I can only tell you more on Monday (luckily...). Until then, here is what I remember. The work space was created, which is proven by the fact that when I want to create a new workspace with the same name, I am getting an error, which says that a workspace with that name already exists. However, I cannot delete the workspace, since it show up nowhere.No hidden workspace got created. I'm pretty sure the request is just in the queue waiting to be approved/declined. In the meantime a workspace with the same name cannot be requested.
By the way, how do you quote some text here? I just put a '>' in the first character position before the text to quote. You can also use the " rich text icon above the text pane.
Scott

How to implement multiple Value Helps within the same Application ??

Dear Experts,
I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
The following error text was processed in the system HE6 : A row with the same key already exists.
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
I dont know how to implement multiple value helps.Need your help on this.
Regards,
Mamai.

Hi
Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT so it giving error at the time of initialization .
Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
BR
Satish Kumar

Multiple info records for the same material record in the catalog

Hi Guys,
I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape is as follows:
Systems:
SRM 5.0 (Classic implementation scenario)
ECC 6.0
SRM-MDM 2.0
PI 2005
Material master is maintained in R/3 and the materials are replicated to SRM. From SRM we replicate all materials to the catalog repository in SRM-MDM.
As the material master in R/3 is vendor independent, the materials replicated to SRM also have no vendor attached. For the first initial material replication from SRM to the catalog SRM-MDM this also means that the products in the main table of the repository, u2018catalog positionsu2019, will not have a vendor or vendor number attached (i.e. no reference to a source of supply).
To assign a source of supply in the repository to a product (record) we will use info records which are replicated from R/3 to SRM-MDM. The mapping for this in the Import Manager can only be based on the product number. As this is the only unique value available which can map a info record to a already existing (but vendor less) ptoduct item in the catalog.
As long as every item in the repository has only one unique info record, meaning one source of supply with a specific price, there is no issue in the above scenario. Based on the product-id, the info record data will be matched with the material item in the catalog.
The issue for me arises when multiple info records exists for the same material. The info records can heave different vendors and different prices. All possible vendors should be available in the catalog for the same material (at least this is the requirement ).
At this point the product-id will no longer be an unique value. Importing the info records will cause problems, as only one material record is available in the repository for the specific product-id (remember that when doing a initial replication of the material master to the catalog, no vendor data is replicated).
Does anyone had this issue before, and knows a solution? Is it for example possible during the import of the info records in the Import manager, to duplicate material records in the destination data, based on the number of info records available in the source data for the same product-id. Or is there an other solution that I am missing?
Your help would be appreciated!
Regards,
Skander

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Multiple shipping addresses for the same supplier (depending on the symbol)

Hello ,can we set up multiple shipping addresses for the same supplier (depending on the symbol)?
.& How..
Thanks

a delivery adedress has nothing to do with a certain supplier, except you are talking about subcontracting (do you?)
a delivery address specifies an address where you want the supplier to send the goods to.
if it is a third party PO, then the delivery address is derived from ship-to partner of the sales order.
in case of a standard order to stock, the delivery address is coming from the storage location address (if maintained). if no storage location address is maintained, then SAP takes the address from your plant.
You can manually add a delivery address in MEAN transaction and then manually assign in POs delivery address tab.
here you can as well take the address from any address already in your system (e.g. any customer or vendor).

Multiple connection pools in the same DB physical source

Hi, I have this situation in BI Admin:
A single DB with 2 physical schema and 2 Connection Pools with OCI 10/11g.
Clicking on any table I can see the data after selecting the right connection pool for that table.
I created a Business Model based upon tables from one of the 2 physical schemas and a corresponding presentation layer. It is consistent and I can view the related subject area in Answers, but when I select a Dimension column (CONVERGENZA_NEGOZIO.STATO) and the fact measure ( Convergenza_Fact.INCASSO ) in viewing results I get this error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT CONVERGENZA_NEGOZIO.STATO saw_0, Convergenza_Fact.INCASSO saw_1 FROM Convergenza ORDER BY saw_0
Is it caused by the multiple connection pools under the same DB?

Yes I think that's correct, but only if you're going to use the same user to connect to them.
If you have a single user you're using to connect to a database to read data which happens to be over more than one schema, you'd use one connection pool.
However if you have entirely separate schemas (eg. different applications) and need to use a different user for each then you would use one connection pool per schema. Also if you thought you might move one of the schemas to another physical database at some point in the future it might be prudent to use a separate connection pool from the outset.
If you're still getting the error that the table cannot be found and your users have full permissions then logically the table that's being looked for does not exist, or you have not qualified it. What I mean by that is if you are connecting as USER2 and SELECT * FROM TABLE_A then the database will assume that you mean USER2.TABLE_A. If you mean USER1.TABLE_A then you need to make sure the qualification is in there.
In the admin tool check your Physical layer is set up correctly with your Physical Tables residing in the correct Physical Schemas.

Question about multiple resource objects using the same OID target account

In Oracle Identity Manager 11g with OID connector as a target system.
Is it possible to create multiple resources that use the same OID IT Resource. Each resource is responsible for provisioning certain OID attributes of the same OID account. For example 'OID User' would provision the basic account and a separate resource called 'Department1 User' would provision attributes not provisioned by OID User.

Yes, definitely. Here is how it would work:
- You would have to make sure that the resource OID User always gets provisioned first, so that the account exist when these additional attributes are being set for the user via the other resource Department1 User. You can do this with Resource Dependency in OIM.
- Now for using the same IT Resource, just create the new form and in the IT Resource type form field, map the properties to the same IT Resource Definition, so when the Provisioning Process gets invoked it uses the same IT Resource instead.
Thanks
SRS

Impact of merging plant B to plant A. Both plants are under the same CoCode

Hello Gurus,
May I request please for your assistance on the query I have. We are about to merge plant B to plant A (when i say merge, we'll also merge all existing SLOC under plant B to plant A), and with that I'd like to know if what would be the impact of this merger. Please note that both plants are under the same company code.
Also, since the plan is to no longer post tansactions for plant B until March, then is it ok to deactivate plant B and it's storloc afterwards? The plan is to complete or close first all open and pending transactions for plant B until March then deactivate it. Is it ok to deactivate it by then? Will it not cause an impact?
Please help and advise. Your inputs would be greatly appreciated.
Thank you very much in advance.
Regards,
Lee T

Hello Ajay,
Thank you very much for your response. I have taken note of it. But could you advise if there's an impact if we activate it? What is the impact on the storloc assigned to it? Where should the deactivation take place? Is it in the plant level or storloc level?
PLease help.
Thank you very much in advance.
Regards,
Lee

Invoice output to be added as an attachment in the same invoice

Hi All,
We are using attachment functionality in R/3 System & we have a requirement that the output associated to that invoice should be attached to the same invoice as a PDF format, can this be achieved in simpler ways.
I am looking more at standard ways or with minimal developments, below is the logic which am planning but it is complex
PDF conversion to be adopted, but not sure on how it works on batch job ( if this is possible, please let me know)
Populating the output in an application layer as a PDF by batch job using VF31 transaction ( not clear on the way the naming convention that can be made on such things & hence presume for naming convention atleast i need to go for custom development).
I was indicating about naming convention in the earlier step which will be useful for me when i create a z-program that will take the file name & opens the invoice in VF02 & take that PDF for attaching it.
if we have any other alternatives, please let me know.
Regards
Ilango

At the first outset, I dont think, this is possible. Moreover, this approach is definitely not recommended since it will severely impact on the system performance and if there is a Security Team, they will not allow to have this practice.
Normally, either we can send as PDF attachment to any internal user via email or this can also be sent externally via PDF. There is also an option to view as PDF from the existing output itself.
G. Lakshmipathi

MIRO: Multiple plants exist in the same invoice

Similar Messages

Maybe you are looking for