Multiple connection pools in the same DB physical source

Hi, I have this situation in BI Admin:
A single DB with 2 physical schema and 2 Connection Pools with OCI 10/11g.
Clicking on any table I can see the data after selecting the right connection pool for that table.
I created a Business Model based upon tables from one of the 2 physical schemas and a corresponding presentation layer. It is consistent and I can view the related subject area in Answers, but when I select a Dimension column (CONVERGENZA_NEGOZIO.STATO) and the fact measure ( Convergenza_Fact.INCASSO ) in viewing results I get this error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT CONVERGENZA_NEGOZIO.STATO saw_0, Convergenza_Fact.INCASSO saw_1 FROM Convergenza ORDER BY saw_0
Is it caused by the multiple connection pools under the same DB?

Yes I think that's correct, but only if you're going to use the same user to connect to them.
If you have a single user you're using to connect to a database to read data which happens to be over more than one schema, you'd use one connection pool.
However if you have entirely separate schemas (eg. different applications) and need to use a different user for each then you would use one connection pool per schema. Also if you thought you might move one of the schemas to another physical database at some point in the future it might be prudent to use a separate connection pool from the outset.
If you're still getting the error that the table cannot be found and your users have full permissions then logically the table that's being looked for does not exist, or you have not qualified it. What I mean by that is if you are connecting as USER2 and SELECT * FROM TABLE_A then the database will assume that you mean USER2.TABLE_A. If you mean USER1.TABLE_A then you need to make sure the qualification is in there.
In the admin tool check your Physical layer is set up correctly with your Physical Tables residing in the correct Physical Schemas.

Similar Messages

Query about multiple connection pools under one database

Hi,
I have s query about connection pool, now we have a requirement,
we have two schemas in one db, some data store in one schema, some in another schema,
all tables are the same, but data is different, we want to retrive all data under two schemas,
so we need two connection pools under one database,
I have set two system DSN, and each connection pool was mapping to one DSN,
but after I importing tables into RPD, when I view data, there is a dialog let me select connection pool. so If this, when we drag columns in answer, it will definitely get wrong.
so how to realize this function about multiple connection pools under one database and we can get data normally.

Hi,
Try this step
1)Better to create two different DSN for the same database with different user id and password
2)now create multiple connection pool in the same database in u r RPD physical layer .
also refer this link : for imporving performance
http://obiee101.blogspot.com/2009/01/obiee-multiple-connection-pools.html
http://gerardnico.com/wiki/dat/obiee/connection_pool
Thanks
Deva

Multiple OLE DB connection managers to the same database instance in a SSIS package

Hi,
While migrating DTS package to SSIS package, I came across one which had multiple OLE DB connection managers all connecting to the same Oracle schema in the same instance.
There are that many execute SQL task corresponding to each of these connection managers.
Each of these SQL task call different Oracle stored procedures and executes them in the same schema in the same instance.
My question is, is there any particular reason or advantage in having multiple connection managers?
Can't we have one single connection manager and use the same in all of these SQL tasks?
Does multiple connection managers provide any added advantage like parallelism or something?
In this particular case, there are no actual workflows, rather each of these SQL tasks are stand alones. But there are other packages which has SQL tasks in workflow but still each of them calling separate connection managers all calling the same schema
in the same instance.
Thanks for your time.
Cordially, Biju George

Well like I said, each of these SQL task calls "different" Oracle stored procedures even though executes them in the same schema in the same instance. I tried a sample testing by creating two separate packages, one with only one single
OLE DB connection referred in all of the SQL tasks and in the other one with mutiple OLE DB connections to the same schema in the same instance each of which is referred in each of the SQL task in one to one mapping.
Now the first one created one session in Oracle but the later created as many sessions as there where OLE DB connection managers. The first one took longer to complete than the second one since second one created independent sessions and executed those procedures
sort of parallely.
I guess that can be called an advantage of creating multiple connection managers to the same schema in the same instance.
Cordially, Biju George

Multiple Connection Pools in OBIEE 10g

Hi Experts,
My question is as follows:
Let's say in the RPD I create 2 connection pools in 1 database schema. I understand that that 1 connection pool should be dedicated for repository & session variables, and 1 connection pool dedicated to physical queries on the table.
How does OBIEE know which connection pool to use for the physical tables? I haven't been able to find anything in the RPD that tells a table which connection pool to use when running a query in answers.
Example:
Connection Pool A (used to generate session variables)
Connection Pool B (in 'theory' used for physical tables)
What is stopping answers from using Connection Pool A? What is forcing answers to use connection pool B?
An answer in OBIEE 10g is fine.
Thanks!
John

When a connection pool is named in an initialization query then that connection pool is always used even if the user is explicitly denied permission to use the connection pool.
This means that a connection pool used for initialization which does not have permissions for any user or user group can occur in any order in the connection pool list. But if it has permissions for a specific user or user group then it must be placed after any general query connection pools for the same user or group to ensure that it is not used for general purpose queries.
Refer: http://everythingoracle.com/obieecnpl.htm
Please mark if helps.
Thanks,
-A.Y

Physical Tables from multiple connection pools

Hi all,
we have in our RPD file two connection pools (let's say A and B), each connecting to a different source DBs.
Thus, each physical table resides either in source DB A or B (xor).
The specified connections work in Admin tool, and also direct database requests work in OBIEE 11G if we explicitly
provide the correct connection pool. The connection pools are specified in order A,B in the Admin tool.
However, using OBIEE answers always results in following error message if data from the connection pool B
is to be queried:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000]
[nQSError: 10058] A general error has occurred.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed. (HY000)
If we exchange the order of connection pools to B,A in Admin tool, we get the same error if we query
data from connection pool A.
It seems that each connection pool needs to be able to access all physical tables. Is that correct?
Thanks, Thomas
Edited by: user13376481 on Mar 4, 2013 3:08 AM

Hi Thomas.
I have the same escenario...
you tried the solution? worked?
Thanks.
Hamilton T

Ability to open multiple SQL Worksheets for the same connection

Hi,
Please allow the ability to open multiple SQL Worksheets for the same connection, now only one can be opened.
Thanks

Logged Bug 9000801 - ea1: otnforum: worksheet launcher does not remember the last/default connection
-Raghu

Oracle XE on multiple virtual machines on the same physical machine?

hi,
does oracle's licensing for 11g express edition prohibit running XE databases on multiple virtual machines on the same physical machine? if not, does the machine have to be "hard partitioned" per oracle specifications (link below) to make it legal?
http://www.oracle.com/us/corporate/pricing/partitioning-070609.pdf
i found a similar question regarding 10g express edition in the forum (link below), but it doesn't seem like the question was ever definitively answered.
Oracle XE on multiple virtual machines on the same physical machine?
thanks

I thought until I just checked that this was a clear cut no in that it specifies 'a single server'. Now I'm not sure as 'server' is an amibuous term. I at least know that as soon as you start giving developers access to theor own XE instance for dev/testing that there are many VM environments where you can't really know what physical macine your VM is running on to actually be able to tell if you had multiple XE instances running on a single 'Physical' server. I'm not sure the question has been answered by Oracle though.

Multiple JSP's accessing the same thread

I have multiple users calling multiple JSP's. I also now want to add in a connection pool, which is implemented as a Runnable (It's a thread). However, how do I set it up so that all of the JSP's get a reference to the same connection pool?
I have done this in a Servlet, where I could have the connection pool constructed in the init() function, and then the Servlet kept a static reference to the pool. Then for each request, I pass the reference to the pool into the service() function of my supporting classes.
How can I do this in JSP?

There are few things.......
I do not know which application server you are using , but almost all competitive application server provide the concept of connection pooling. You do not have to implement connection pooling yourself. And to get a handle to the connection from the pool is through JNDI namespace(as you do for EJB.)
Now if you still want to do that yourself then, i can propose one way.
1) Put a instance of the Java class which holds the connection pooling in the application scope.
ie useBean= Yourclass scope="application"
2) Now all the JSP's will be able to get to the same object.
So Look for documentation for putting objects in different scope ie session, application etc.
Srinivasan Ranganathan

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

Can Multiple users work on the same work Repository ?

I have master repository and work repository on one machine, can multiple developers connect andwork on the same work repository? how?

oh Yes!
it is v simple.
follow the steps:-
once master and work repository has been created on a system.U just need to know all the information supplied wen creating a login to designer.
like user name and password of database,url,driver as well as master's repository uname and password.
if u have the following information with you,then u can create a new login with designer provided all the above information and u will have full access to designer
in work repository u want to connect

Multiple Apple TVs on the same network

I teach at a school and have used an Apple TV in conjunction with my iPad for presentations. I find it invaluable. Other teachers at my school would like to do the same, but I'm told by our tech support that multiple Apple TVs on the same network cause problems. When I ask them what problems, they aren't sure. They just tell me that other school have experienced problems. Other than a wifi bandwidth problem, I can't imagine what kind of problem it would be. A collegue of mine wants to jump onboard but desn't want to make waves. Does anyone know of any problems?

I have two Apple TV's, one in the living room and one in the bedroom... however, the living room is the only one that my iphone Remote APP is connecting with... I've named/tagged the two ATV's hoping that the Remote APP would provide me the option on which one to control, but it doesn't....
I've confirmed that home sharing is "on" with in all devices "settings"...
Any suggestions?

Multiple SSID's on the same subnet?

Can you have Multiple SSID's on the same subnet?
SSID1 authenticates clients via radius.
Our corporation bought printers with wireless cards that only support WPA-PSK so we created SSID2 for the printers. We can connect to both SSID's and ping from SSID1 to SSID2 but we can not perform other functions such as view the printer management interface with a browser. Should it be possibe to communicate between SSID1 and SSID2 on the same subnet?

Yes you should have no issue, but the only thing is that you are using a lower security method... so either you put them on different subnets so you can control the traffic via acl's or might as well use the same security method to make it easier. The fact that you can ping sounds like you should be able to http to the device.

Can I use multiple sa-ns500 on the same network?

Is it possible to use multiple sa-ns500 speakers on the same network? they seem to want to have the same name on the network and therefore only 1 will connect at a time? Can I rename one somehow? Thanks!

Hello Brian,
Welcome to Sony Community.
Please check for the Secure Link option in the Home Theater System or A/V Receiver. This will help isolate the connection to the different Network speakers.
Yes, you can use multiple Network speakers on the same home network.
You can change the Device name using the Setting screen on the browser.
Follow the steps mentioned on the page # 34 and 35 of the User’s manual to start up the browser of the Network speakers and change the Device name.
If my post answers your question, please mark it as an "Accepted Solution."

Cant login multiple network accounts on the same client?

Setup:
I have created a simple Lion Server on a new i7 Mac Mini. I have configured Open Directory in Master mode and have setup 4 user accounts. I have enabled the File Sharing service and checked the "Make available for home directories" option on the "Users" file share. I have configured each of the 4 user accounts to use this location as the home folder. I have connected my client machines (all OSX Lion) to the Network Account Server.
Problem:
I can log one user into the client machine, but when using "Fast User Switching" and logging on as the second user I get the following error:
"You are unable to log in to the user account "guestaccount" at this time. Loggin to the account failed because an error occured"
In the console if I search for that user account the related error message is:
11-07-31 12:30:54.993 PM authorizationhost: ERROR | -[HomeDirMounter mountNetworkHomeWithURL:attributes:dirPath:username:] | PremountHomeDirectoryWithAuthentication( url=afp://inntaserver01.local/Users, homedir=/Network/Servers/inntaserver01.local/Users/guestaccount, name=guestaccount ) returned 16
Any thoughts as to why the Home Folder "mounter" failed in this scenario?

Historically you have never been allowed to use Fast User Switching to log in multiple network logins on the same client machine. This certainly applied with Tiger, Leopard, and Snow Leopard. I have not yet personally tried this with Lion.
I believe that the underlying reason for this not being allowed is down to how AFP volumes are mounted. The AFP mount becomes 'owned' by the user that triggers the login. With a network login the first user becomes the owner and this means subsequent attempted network logins are denied access to that share and hence cannot access their home directories.
With Tiger, Leopard, and Snow Leopard servers, one could configure network home directories to be shared via NFS instead of AFP. NFS gets treated a lot different in terms of mounting, and is done more at a system level than a user level. While again I have not personally tried Fast User Switching with NFS shared home directories, this approach is specifically recommended by the authors of AquaConnect (a Macintosh Terminal Server solution) in order to allow multiple logins on the same Terminal Server. This seems to be for the same underlying reason. Using NFS does certainly work for use with AquaConnect and also works for the competing iRAPP Terminal Server product as well.
Unfortunately, Lion Server while it can be made to run an NFS server, will not let you configure using NFS for sharing home directories. I have actually reported this as a 'bug' in Lion server.
Neither the authors of AquaConnect or iRAPP have actually tested this scenario with Lion server yet, but AquaConnect do plan to investigate it. It could make it considerably more difficult to use their products.
So in summary, using NFS to share network home directories in theory would avoid the problem and can be done with a Tiger/Leopard/Snow Leopard server, but cannot be done with a Lion server. It is possible however to mix Lion with older server versions. This might for some people be a possible workaround.
PS. A bonus side-effect of using NFS shared home directories was that this allowed badly written software like Adobe's applications which are otherwise notorious for having major issues with network logins and home directories to work without errors. As an example Adobe Acrobat Pro introduced a bug in version 7.0 which prevented it being able to print-to-PDF (one of the major reasons to buy Acrobat Pro). It tooks two years for them to eventually fix this in Acrobat Pro 8.1 (I know because I spent that two years nagging them to fix it and was a beta tester). Unfortunately they then reintroduced the bug in Acrobat Pro 9.0. Fortunately I discovered this side-effect got round the issue although a clunkier workaround was also possible for Snow Leopard clients by redirecting certain folder paths.

Multiple Executions Plans for the same SQL statement

Dear experts,
awrsqrpt.sql is showing multiple executions plans for a single SQL statement. How is it possible that one SQL statement will have multiple Executions Plans within the same AWR report.
Below is the awrsqrpt's output for your reference.
WORKLOAD REPOSITORY SQL Report
Snapshot Period Summary
DB Name         DB Id    Instance     Inst Num Release     RAC Host
TESTDB          2157605839 TESTDB1               1 10.2.0.3.0 YES testhost1
              Snap Id      Snap Time      Sessions Curs/Sess
Begin Snap:     32541 11-Oct-08 21:00:13       248     141.1
End Snap:     32542 11-Oct-08 21:15:06       245     143.4
   Elapsed:               14.88 (mins)
   DB Time:               12.18 (mins)
SQL Summary                            DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
                Elapsed
   SQL Id      Time (ms)
51szt7b736bmg     25,131
Module: SQL*Plus
UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(ACCT_DR_BAL,
0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND TEST_ACC_NB = ACCT_ACC_NB(+)) WHERE
TEST_BATCH_DT = (:B1 )
SQL ID: 51szt7b736bmg                  DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> 1st Capture and Last Capture Snap IDs
   refer to Snapshot IDs witin the snapshot range
-> UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(AC...
    Plan Hash           Total Elapsed                 1st Capture   Last Capture
#   Value                    Time(ms)    Executions       Snap ID        Snap ID
1   2960830398                 25,131             1         32542          32542
2   3834848140                      0             0         32542          32542
Plan 1(PHV: 2960830398)
Plan Statistics                        DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
   into the Total Database Time multiplied by 100
Stat Name                                Statement   Per Execution % Snap
Elapsed Time (ms)                            25,131       25,130.7     3.4
CPU Time (ms)                                23,270       23,270.2     3.9
Executions                                        1            N/A     N/A
Buffer Gets                               2,626,166    2,626,166.0    14.6
Disk Reads                                      305          305.0     0.3
Parse Calls                                       1            1.0     0.0
Rows                                        371,735      371,735.0     N/A
User I/O Wait Time (ms)                         564            N/A     N/A
Cluster Wait Time (ms)                            0            N/A     N/A
Application Wait Time (ms)                        0            N/A     N/A
Concurrency Wait Time (ms)                        0            N/A     N/A
Invalidations                                     0            N/A     N/A
Version Count                                     2            N/A     N/A
Sharable Mem(KB)                                 26            N/A     N/A
Execution Plan
| Id | Operation                    | Name            | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT             |                 |       |       | 1110 (100)|          |
|   1 | UPDATE                      | TEST            |       |       |            |          |
|   2 |   TABLE ACCESS FULL          | TEST            |   116K| 2740K| 1110   (2)| 00:00:14 |
|   3 |   TABLE ACCESS BY INDEX ROWID| ACCT            |     1 |    26 |     5   (0)| 00:00:01 |
|   4 |    INDEX RANGE SCAN          | ACCT_DT_ACC_IDX |     1 |       |     4   (0)| 00:00:01 |
Plan 2(PHV: 3834848140)
Plan Statistics                        DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
   into the Total Database Time multiplied by 100
Stat Name                                Statement   Per Execution % Snap
Elapsed Time (ms)                                 0            N/A     0.0
CPU Time (ms)                                     0            N/A     0.0
Executions                                        0            N/A     N/A
Buffer Gets                                       0            N/A     0.0
Disk Reads                                        0            N/A     0.0
Parse Calls                                       0            N/A     0.0
Rows                                              0            N/A     N/A
User I/O Wait Time (ms)                           0            N/A     N/A
Cluster Wait Time (ms)                            0            N/A     N/A
Application Wait Time (ms)                        0            N/A     N/A
Concurrency Wait Time (ms)                        0            N/A     N/A
Invalidations                                     0            N/A     N/A
Version Count                                     2            N/A     N/A
Sharable Mem(KB)                                 26            N/A     N/A
Execution Plan
| Id | Operation                    | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT             |              |       |       |     2 (100)|          |
|   1 | UPDATE                      | TEST         |       |       |            |          |
|   2 |   TABLE ACCESS BY INDEX ROWID| TEST         |     1 |    28 |     2   (0)| 00:00:01 |
|   3 |    INDEX RANGE SCAN          | TEST_DT_IND |     1 |       |     1   (0)| 00:00:01 |
|   4 |   TABLE ACCESS BY INDEX ROWID| ACCT         |     1 |    26 |     4   (0)| 00:00:01 |
|   5 |    INDEX RANGE SCAN          | INDX_ACCT_DT |     1 |       |     3   (0)| 00:00:01 |
Full SQL Text
SQL ID       SQL Text
51szt7b736bm UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL, 0) +
              NVL(ACCT_DR_BAL, 0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND PB
             RN_ACC_NB = ACCT_ACC_NB(+)) WHERE TEST_BATCH_DT = (:B1 )Your input is highly appreciated.
Thanks for taking your time in answering my question.
Regards

Oracle Lover3 wrote:
Dear experts,
awrsqrpt.sql is showing multiple executions plans for a single SQL statement. How is it possible that one SQL statement will have multiple Executions Plans within the same AWR report.If you're using bind variables and you've histograms on your columns which can be created by default in 10g due to the "SIZE AUTO" default "method_opt" parameter of DBMS_STATS.GATHER__STATS it is quite normal that you get different execution plans for the same SQL statement. Depending on the values passed when the statement is hard parsed (this feature is called "bind variable peeking" and enabled by default since 9i) an execution plan is determined and re-used for all further executions of the same "shared" SQL statement.
If now your statement ages out of the shared pool or is invalidated due to some DDL or statistics gathering activity it will be re-parsed and again the values passed in that particular moment will determine the execution plan. If you have skewed data distribution and a histogram in place that reflects that skewness you might get different execution plans depending on the actual values used.
Since this "flip-flop" behaviour can sometimes be counter-productive if you're unlucky and the values used to hard parse the statement leading to a plan that is unsuitable for the majority of values used afterwards, 11g introduced the "adaptive" cursor sharing that attempts to detect such a situation and can automatically re-evaluate the execution plan of the statement.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Multiple connection pools in the same DB physical source

Similar Messages

Maybe you are looking for