MIRO / VERSION MANAGEMENT ERROR

HELLO EXPERTS,
I am facing following types of error,
when I am going for MIRO for any purchase document I am facing this type of error..
Purchasing document 3300001028, version 1 in process
Message no. MEDCM014
though the message is not error message rather warning message, i have to enter several times, after that I am able to do MIRO for it...
again i have checked the document type for this purchase order 3300001028...
for this document type version management is not active.
so can anybody tell me how to overcome from this error...
kindly help me..
regards,
raghu

Hi
You have activated version managment for the External purchasing documents.So the moment you Save PO the version managment comes into picture and at header level new tab apperas as version.
So you need to expand header details and you will find this tab just after Status tab
Status Version Compl.
0 X
Regards

Similar Messages

Internal Data Transfer to Funds Management - Version Management Error

Hi All,
We are trying to convert the open PO's in our system that were created before FM was implemented, and that are to be converted now before the MIGO stage.
We are using the following steps:
1) Select the document
2) Convert the worklist.
We had done the first step, and faced no issues. During the conversion of the worklist, we face the following error
Message ID - MEPO;Message Number - 813; Version Management of purchase order still faulty.
Message ID - MEDCM; Message Number - 4; Enter short text for version
Message ID - MEDCM; Message Number - 3; Enter reason for change for version
In the Control Data for each of the Document Type, the control data, Version Active and Version 0 OK are activated.
Can someone kindly suggest what could have possibly gone wrong here ?
Regards,
Wy

Hi All,
Just to clarify, I went through note 800784 and found that in our system
1. None of the fields - 'Reason,' 'Description,' 'Req By,' 'Req By Ext' or 'Post Date' - is a required entry in the version management field selection
2. None of the fields - EKPO-ELIKZ or EKPO-EREKZ or EBAKZ - are set as Version-Relevant Fields of Purchase Requisitions.
Cant figure out why I am not able to assign the fund centre and commitment item here, although I am able to perform MIGO and MIRO on that.
Regards,
Wy

Version Management error

Dear Gurus,
Am havng a problem in version Management. After creating a P.O and saving it I need to make changes in it. I am changing the quantity and before saving the P.O i want to enter the reason for change. The red flag on top of status tab is not coming and it is not allowing me to enter the reason for change. Kindly guide me how to fix this prblm...Thankyou...

Hello,
New version will only be triggered, once you completely release the PO, output the PO and then do any changes with print relevant fields.
For maintaining reason for change in version, you can follow Customizing --> Purchasing --> Version Management --> Set Up Version Management for External Purchasing Documents, and make the field mandatory.
Hope this helps.
Thanks & Regards,
Mihir Popat

Unable to uninstall cs6 beta version due to Adobe Application Manager error

A few weeks ago I installed the beta version of cs6 but never was able to run that program due to the Adobe Application Manager error I received each time I attempted to launch it. I never found any solutions on the internet so I just gave up. Recently I purchased Photoshop cs6 anyway, however, in order to install cs6 you must uninstall the beta version of cs6. Unfortunately Windows 7 will not uninstall the beta version. Each time I click on uninstall, nothing happens. Until I can uninstall the beta version, I will not be able to install my newly purchased Photoshop cs6. Does anyone have any suggestions or solutions?

Run the Creative Suite Cleaner Tool. The tool can clean up install records for any pre-release (beta) installations of these Creative Suite products.
http://www.adobe.com/support/contact/cscleanertool.html

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

Event 7024, Service Control Manager Error %%16842771

Am running Windows Server 2008 R2 OS. I received a Service Control Manager error, event ID 7024 with an error code of
%%16842771 when trying to stop the PlanetPress Suite Messenger 7 service. Does anyone know what this error code of
%%16842771 means and/or how to fix it? Is there somewhere that I can look up these codes? Here are the details:
System
Provider
[ Name]
Service Control Manager
[ Guid]
{555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName]
Service Control Manager
EventID
7024
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8080000000000000
TimeCreated
[ SystemTime]
2013-12-03T16:40:51.395984800Z
EventRecordID
33920
Correlation
Execution
[ ProcessID]
512
[ ThreadID]
11744
Channel
System
Computer
AXE1PPS02P.axe.anixter.com
Security
EventData
param1
PlanetPress Suite Messenger 7
param2
%%16842771
Thanks,
Laurie

The error code may be linked to application (PlanetPress Suite Messenger 7).
So seek help from application vendor once.
Regards, Ravikumar P

PO version management - view history version

Hi expert,
I'm using PO version management together with change PO output.
1. Is there a way to pre-view or re-print a certain history version of the PO output? currently only the last version can be previewed and I got error message when I try to reprint hisotory version (no printed relevant changes).
2. When I change the PO, a new version is not created until I save the PO. I have to come to the change mode again to mark it "complete". Is there a way to have the new version available before save, so I can make my changes and mark it completed right way.
3. Is there a standard SAP report shows incompleted PO versions? I need to run it to remind me of the PO's that I still need to work on or to mark completed.
Thanks a lot for your kind help!
Regards,
Jully

Hi Jully,
You can try the following link :
http://www.sap-img.com/mm001.htm
It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
Take the help of your ABAP consultant to run for you.
See if it helps.
Best regards
Amit Bakshi

Version management for POs

Dear friends,
Iam implimenting Version management for purchase orders.I have got doubts like;
1)---In IMG side ,under setup change displays node, we need to enter all the field names of purchase order document type wise, ..i.e.
we have got three doc.types of POs,NB,ZCP,ZCO,then Header and item details fields of PO shall be entered against each doc.type in this node.
like -NB-EKPO---MATNR
NB-EKKO-field
We need to enter tables as EKKO and EKPO and
all the fileds are to be entered for all the doc.types.
we need to enter all the fields including header fields and item fields ,
2)----For header fields,if i change the data,version is not creating,
3)--At item details ,after release of the PO,if i change the data,if i save the document,it is saving without automatically closing the version.We need to manually close the version.
I have given error category E for application MEDCM for 14,19,22,eventhough system is not giving error.
Atleast provision should be there to give error if user doesnot close the version manually.
Please suggest for my doubts.
Regards,
Magana

Hi
For a combination of purchasing organization, document category, and document type, you can:
<b>Activate version management</b>
If version management is active, changes to a purchasing document are managed in versions.
<b>Define field selection for versions</b>
You can specify the attributes certain fields of the version are to have: mandatory entry, optional entry, display only, field suppressed.
Set the message ststus as follows
MEDCM     014     Purchasing document &, version & in process     W
MEDCM     019     Purchasing document &, version 0, still in process     E
MEDCM     021     Not all version-relevant changes were cancelled (&1)     W
MEDCM     023     No unprocessed message exists                         W
System will allow to manually close the version .Version 0 will be set automatically .After that system will allow to manually close the version.
I dont think you will face probelm.
Regards
Sunny

Version Management active for Release Purchase Orders

Hi Friends
We activated Version Management for Purchasing documents. Version 0
activates automatically when we create PO / contract. After final
release version will be closed automatically.
When ever new version is active we could able to make release orders.
When we make message no.MEDCM014 to error, we could not to do. But we
want release orders should be make up to old value.
Can we do with some user exit or BADI for this purpose.
Regards,
Sai Krishna

Hi,
I think there is no std. way to solve this
Regards,
Sai Krishna

Sales Order Version Management

Hello Guys
Who had any experience or document or solution about the Sales Order Version Management just in SAP R3 or ECC6.0?
Thank you so much!
Best Regards
Wang yiwei

Dear Vincent
May be this is related ABAP Issue please check with them because i found same issue
"BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.
"Specify either address number or address handle " BAPI_SALESORDER_CREATEFR

Version management output type issue

hi,
we have activated version management and all working fine .
but while taking print out through ME9F we have assigned to 3 output types (NEU,ZNEU,ZNIU) for a single PO , until and unless we take print for 3 output tyes we are not able to amend the PO .we are getting the below error .
"No new version created because a message has not yet been transmitted"
is there any option if we take print for one output type(ZNEU )out of 3 output types(NEU,ZNEU,ZNIU) it should allow us to do changes in PO .
please assist we need to close the requirement on priority .
thanks in advance

HI,
is there any option if we take print for one output type(ZNEU )out of 3 output types(NEU,ZNEU,ZNIU) it should allow us to do changes in PO .
No i don't think so system will create new version.
new version is created when you output PO completely
try this create pool request for other two message in Message tab in PO in ME22N and then try PO it will work
Regards
Kailas Ugale

Microsoft-Windows-Windows Remote Management Error ID 142

In my Windows Server 2008 R2 OS in the Event Viewer there is an error pertains as Microsoft-Windows-Windows Remote Management Error ID 142 states-(WSMan operation CreateShell failed, error code 2150858999).What is this error? And What is the remedy for this
error?
System
Provider
[ Name]
Microsoft-Windows-WinRM
[ Guid]
{A7975C8F-AC13-49F1-87DA-5A984A4AB417}
EventID
142
Version
0
Level
2
Task
10
Opcode
2
Keywords
0x4000000000000002
TimeCreated
[ SystemTime]
2011-11-10T06:32:40.654451200Z
EventRecordID
37902
Correlation
[ ActivityID]
{01F11C40-F800-0000-0091-795E689FCC01}
Execution
[ ProcessID]
7140
[ ThreadID]
8080
Channel
Microsoft-Windows-WinRM/Operational
Computer
WIN-BNILITE1545.mumthaz.contoso.com
Security
[ UserID]
S-1-5-18
EventData
operationName
CreateShell
errorCode
2150858999
MumthazMuhsin

Hi,
Please perform the following steps to check the issue can be fixed.
Create the following Dwords under HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
• MaxFieldLength
o Dword
o Value 65534 (Decimal)
• MaxRequestBytes
o Dword
o Value 40000 (Decimal)
Reboot the server for the changes to take effect.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Indesign standard version installation error for Mac OS: "installer failed to initialize.

Indesign standard version installation error for Mac OS: "installer failed to initialize. Please download Adobe Support Advisor to detect problem". Transferred by application over to new laptop, application considered damaged, with instructions to reinstall. Attempting from downloaded file.

go to HD>library>application support>adobe>caps and rename the caps folder.
go to USER library>application support>adobe>OOBE and rename OOBE folder
install Adobe application manager from below link.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774

CS5 Service Manager error message?

I keep getting the CS5 service manager error message - ordinal not found. Specifically ' the ordinal 3873 could not be located in the dynamic link library LIBEAY32.dll' Any ideas please on how to fix this?

That's very puzzling, but you seem to have an older version of the Adobe Extension Manager for CS5.x. You are on 5.0.x, R_Kelly mentions 5.2.x, and I'm on 5.5.x
Maybe you need to make sure you are updated to Photoshop 12.1 update first, then make sure you are updated to Adobe Extenson Manager 5.5.0.163.
This is the version of the AEM that I have for Photoshop 12.1 (CS5.1) which resides on my Snow Leopard 10.6.8 boot HD:
And this is the version of the AEM that I have for Photoshop 12.1 (CS6) which resides on my Lion 10.7.5 boot HD:
This is the Photoshop 12.1 (CS5.1) application info:

NIMCInit.dll NI-PAL Service Manager Error

Hello all,
I'm getting the attached NI-PAL Service Manager error every time I start my computer. I've tried solution given in this post: http://forums.ni.com/ni/board/message?board.id=240&message.id=4362 thread with no luck.
If I uninstall the NI-Motion drivers, or remove my PXI-7350 from the PXI chassis, the error goes away. After I re-install the NI-Motion drivers and re-start the computer, the problem occurs as soon as the "Found New Hardware" wizard completes, and on every boot thereafter.
Any pointers to what I should try next would be helpful.
OS & Driver Versions:
Windows XP SP2 Version 2002
NI Measurement & Automation Explorer 4.4
NI Motion Assistant 2.2
NI-488.2 2.5
NI-CAN 2.5.2
NI-DAQmx 8.7
NI-FGEN 2.5.1
NI-Motion 7.6
NI-VISA 4.2
Hardware:
PXI-1042 Chassis
PXI-8187 Controller
PXI-7350 (Slot 2)
PXI-2566 (Slot 3)
PXI-8464 (Slot 4)
PXI-6254 (Slot 5)
PXI-6602 (Slot 7)
PXI-5402 (Slot 8)
Attachments:
NI-PAL Error2.png ‏19 KB

Hi Mark,
Make sure that when you uninstall everything you also
1. Uninstall MAX
2. Delete the MAX data folder (this doesn't uninstall when you uninstall).
On Windows XP and Windows 2000:
Navigate to C:\Documents and Settings\All Users\Application Data\National Instruments\MAX\Data\
The folder named Application Data is a hidden folder. You can view hidden folders by selecing Tools » Folder Options..., click the View tab, and selecting Show hidden files and folders.
Note: Remember that deleting the Data folder in its entirety
will remove all configuration settings. The next time MAX is launched,
you will have to configure all of your hardware again.
Thanks,

MIRO / VERSION MANAGEMENT ERROR

Similar Messages

Maybe you are looking for