Mismatch of track-header and track

Once in a while I get these mismatches on my MBP as well as on my Mac Pro on loading Logic X, would love to know how to stop this happening. Just clicking in the Arrange seems to sort it out, but perhaps there's a permanent fix?
Anyone else had these issues?

Hi,
Perhaps you have a problem with rounding in group conditions. Check the Note 315792 'Group conditions of the same amount on item'. Note 80183 'Rounding' perhaps will help you too.
Regards,
Eduardo

Similar Messages

CDs import OK to iTunes Windows but not to iTunes MacOS! I have had 3 successive audio CDs with the same problem. They have exactly 20 tracks each, and track 19 claims to be over 14 hours long, and track 20 over 1 hour long. Any clues?

I have an ageing (2006) iMac running OS 10.6.8 with an external LG CD/DVD writer (I've worn out the internal one). I am not sure whether this is an iTunes issue or a LG issue.
Incident 1: importing a CD with 71 short tracks via iTunes. Track 24 is listed as 25 seconds long, but (on the first attempt) only the first 10 seconds actually import. I spotted it immediately as it also blacked out the artwork and refused to let me paste the artwork back in. A second attempt at the import worked correctly. ** SOLVED AT 2ND ATTEMPT **
Incident 2: importing a CD with 20 tracks averaging a little over 3 minutes each. Gracenote did not recognise the disc. The first 18 tracks showed reasonable track lengths, but track 19 showed 14 hours 43 minutes 21 seconds [!] and track 20 showed over 1 hour [possibly track 20 was showing the length of the entire CD]. The remaining 2 tracks were successfully imported into my other iTunes on a Windows XP machine (where Gracenote *did* recognise the CD) and transferred to the Mac over my internal network. The next 2 CDs also had exactly 20 tracks each, and also had track 19 showing 14 hours 43 minutes and a few seconds (not quite the same as the original track 19, but close...) and track 20 showing over 1 hour [again possibly the length of the entire CD].
I tried "Get album artwork" on one of the early tracks of one of the CDs, and it came back with an error "Invalid TOC" - this looks to me like the table of contents is getting corrupted (hence the bizarre track lengths reported, and hence Gracenote not recognising the resulting bizarre profile) when there are exactly 20 tracks on the CD.
But a CD with 21 tracks looks OK, and so does a CD with 8 tracks.
I'm putting this one down as ** SOLVED BY USING ITUNES ON WIN-XP AND TRANSFERRING FILES BETWEEN MACHINES ** but I would like to know what is going on!
Has anyone else had a similar problem?

At the lower bitrates that were popular several years ago, like 128, AAC provides better audio quality than MP3. At some point ( the dbPoweramp experts believe it is 160 ) the advantage disappears, and above that AAC and MP3 are sonically equivalent. However, MP3 still enjoys a huge advantage in acceptance and compatibility across multiple players, programs, and phones.
In any case, it hardly appears to be worth the trouble to re-rip your CDs. But don't discard them either!

The "i" button in the audio track header.

What is the function of the "i" button in the audio track header?

johnnyloonybin wrote:
What is the function of the "i" button in the audio track header?
(I)nput Monitoring
Right click in the audio track header and you can choose which options you want visible.
If you want to know it's purpose (besides the obvious) look it up in the manual or online help.

Naming channel strips one thing and tracks another..?

hi.
i have my global track header set to channel strip name so if i rename a channel strip from the arrange track then all the tracks assigned to that channel will rename the same...
BUT...
sometimes i want to name the channel strip say 'drums' but all the tracks 'kick' 'snare' 'hats' etc....
is this possible because im sure i remember it used to be...?
Thanks!!

Hi,
of course it is possible! CTRL-Click on the Track header and select whatever you want. You can even select to display 2 lines, you can edit the track header name in the inspector window and on and on...
Fox

Deskbar and tracker-svn

I have installed the deskbar applet using pacman (version 2.16.2-3) and tracker (tracker-svn and tracker-gnome-search-tool-svn). Deskbar works, tracker works, but they do not want to work together.
The output message when I run /opt/gnome/lib/deskbar-applet/deskbar-applet -w is:
(deskbar-applet:3285): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
/opt/gnome/lib/python2.5/site-packages/deskbar/Utils.py:82: GtkWarning: Theme directory 48x48/status of theme Tango-custom has no size field
pixbuf = ICON_THEME.load_icon(splitext(icon)[0], width, gtk.ICON_LOOKUP_USE_BUILTIN)
** (deskbar-applet:3285): WARNING **: Binding '<Alt>F3' failed!
/opt/gnome/lib/deskbar-applet/deskbar-applet:131: GtkWarning: locale not supported by C library
gnome.init(deskbar.defs.PACKAGE, deskbar.defs.VERSION)
*** The file /opt/gnome/lib/deskbar-applet/handlers/google-live.py (GoogleLiveHandler) decided to not load itself: You need to install the SOAPpy python module.
*** The file /opt/gnome/lib/deskbar-applet/handlers/beagle-static.py (BeagleHandler) decided to not load itself: Beagle does not seem to be installed, skipping
*** The file /opt/gnome/lib/deskbar-applet/handlers/beagle-live.py (BeagleLiveHandler) decided to not load itself: Beagled could not be found in your $PATH. Unable to start the beagled daemon
*** The file /opt/gnome/lib/deskbar-applet/handlers/epiphany.py (EpiphanyBookmarksHandler) decided to not load itself: Epiphany is not your preferred browser, not using it.
Error loading the file: /opt/gnome/lib/deskbar-applet/handlers/tracker-handler.py.
Traceback (most recent call last):
File "/opt/gnome/lib/python2.5/site-packages/deskbar/ModuleLoader.py", line 91, in import_module
mod = pydoc.importfile (filename)
File "/usr/lib/python2.5/pydoc.py", line 259, in importfile
raise ErrorDuringImport(path, sys.exc_info())
ErrorDuringImport: problem in /opt/gnome/lib/deskbar-applet/handlers/tracker-handler.py - <type 'exceptions.IndentationError'>: unindent does not match any outer indentation level (tracker-handler.py, line 184)
*** The file /opt/gnome/lib/deskbar-applet/handlers/galago.py (GalagoHandler) decided to not load itself: Waiting for python bindings of galago. Should allow to send IM by typing name.
*** The file /opt/gnome/lib/deskbar-applet/handlers/galeon.py (GaleonBookmarksHandler) decided to not load itself: Galeon is not your preferred browser, not using it.
Running installed deskbar, using [/opt/gnome/lib/python2.5/site-packages/deskbar:$PYTHONPATH]
Data Dir: /opt/gnome/share/deskbar-applet
Handlers Dir: ['/home/shane-arch/.gnome2/deskbar-applet/handlers', '/opt/gnome/lib/deskbar-applet/handlers']
Binding Global shortcut <Alt>F3 to focus the deskbar
Using GTK exception handler
Running with options: {'popup_mode': False, 'cuemiac': False, 'do_trace': False, 'standalone': True}
Starting Deskbar instance: <gnome.applet.Applet object (PanelApplet) at 0x86e83c4> None
Set entry width: 20
Layout changed to 1
Set entry width: 20
Layout changed to 1
Changing UI to: Entriac
Loading module 'Mail (Address Book)' from file /opt/gnome/lib/deskbar-applet/handlers/evolution.py.
Loading module 'Files and Folders Search' from file /opt/gnome/lib/deskbar-applet/handlers/programs.py.
Loading module 'Dictionary' from file /opt/gnome/lib/deskbar-applet/handlers/programs.py.
Loading module 'Developer Documentation' from file /opt/gnome/lib/deskbar-applet/handlers/programs.py.
Error:load_icon:Icon Load Error:Icon 'devhelp' not present in theme (or Icon 'devhelp' not present in theme)
Loading module 'Programs' from file /opt/gnome/lib/deskbar-applet/handlers/programs.py.
Loading module 'Files, Folders and Places' from file /opt/gnome/lib/deskbar-applet/handlers/files.py.
Loading module 'History' from file /opt/gnome/lib/deskbar-applet/handlers/history.py.
Loading module 'Yahoo! Search' from file /opt/gnome/lib/deskbar-applet/handlers/yahoo.py.
Loading module 'Web Searches' from file /opt/gnome/lib/deskbar-applet/handlers/mozilla.py.
Loading module 'Web History' from file /opt/gnome/lib/deskbar-applet/handlers/mozilla.py.
Loading module 'Web Bookmarks' from file /opt/gnome/lib/deskbar-applet/handlers/mozilla.py.
Loading module 'Computer Actions' from file /opt/gnome/lib/deskbar-applet/handlers/gdmactions.py.
Loading module 'del.icio.us Bookmarks' from file /opt/gnome/lib/deskbar-applet/handlers/desklicious.py.
Loading module 'Web' from file /opt/gnome/lib/deskbar-applet/handlers/web_address.py.
Loading module 'Window Switcher' from file /opt/gnome/lib/deskbar-applet/handlers/iswitch-window.py.
Initializing History
Initializing Programs
Initializing Web
Initializing Files, Folders and Places
Initializing Web Bookmarks
Initializing Web Searches
Initializing Mail (Address Book)
Initializing Web History
Initializing Window Switcher
Initializing Dictionary
Initializing Developer Documentation
The important bit probably being:
Error loading the file: /opt/gnome/lib/deskbar-applet/handlers/tracker-handler.py.
Traceback (most recent call last):
File "/opt/gnome/lib/python2.5/site-packages/deskbar/ModuleLoader.py", line 91, in import_module
mod = pydoc.importfile (filename)
File "/usr/lib/python2.5/pydoc.py", line 259, in importfile
raise ErrorDuringImport(path, sys.exc_info())
ErrorDuringImport: problem in /opt/gnome/lib/deskbar-applet/handlers/tracker-handler.py - <type 'exceptions.IndentationError'>: unindent does not match any outer indentation level (tracker-handler.py, line 184)
Has anyone had this same problem and fixed it? I attempted to install deskbar-applet 2.18 from the PKGBUILD from abs, but it didn't want to load in the panel, but it ran using the -w flag. It gives the same tracker error.
EDIT: deskbar 2.18 now works in the panel. But that wasn't my problem .
Another EDIT: Now it seems to be recognised. But it doesn't find results that gnome-search-tool does. Maybe that problem will fix itself too...
Error here:
Tracker query: zappa
*** Tracker dbus error: The name :1.103 was not provided by any .service files
*** Tracker dbus error: The name :1.103 was not provided by any .service files
Tracker query: Michael
*** Tracker dbus error: The name :1.103 was not provided by any .service files
*** Tracker dbus error: The name :1.103 was not provided by any .service files
Last edited by DarkJesus (2007-03-20 22:40:29)

It is a common fault with new Mac Air. I had to bring it to an Apple store to get fixed. They did it for free.

How do I set the Track Header in such a way that both the solo and mute are turned off?

How do I set the Track Header in such a way that both the solo and mute are turned off?

Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
http://www.dpreview.com/forums/thread/2638326

The red colored "record ready" button has disappeared from my track header area. The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).

The red colored "record ready" button has disappeared from my track header area.
The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).
Can anyone help me with this?
Thanks
Johnny

Ahrenshof: Thank you for your suggestion:
((preferences>audio>devices (re-select your input source) ))
I already had that done IE. I had duet already chosen as input and output etc etc.
The problem seemed to be the issue that was addressed by Eriksimon:
(( ctrl-click the track Header.))
Following that advice gave me a drop down menu which allowed the various buttons to be
checked and unchecked.
Thanks so much for taking the time out to
help with my problem. It seems to me that
this formum is far better equipped to handle
user's problems than any or the options that
are available on the acual Logic help menu.
It appears that Logic has been put
together by techies who, (though they
may be brilliant at computer software issues), then have
virtually no skill or imagination with regards explaining
how to use it, to the actual users.
I have a PhD in Egyptology. I mention this not
because I think it a particularly brilliant acheivement
but just to indicate that I am not a total dummy.
More to the point I find using Logic needlessly tiresome
and the explanations that are given in the "Help" menu
are nothing short of tragic. Perhaps Apple could start to give
out free ropes or razor blades to everyone who buys the program.
Not to say it is not much better that the other junk out there, it is,
the sorry fact is that that is not saying much at all.
I send sincere thanks to all the users out there who support
each other through this forum. johnnyloonybin

Opening the arrange window ... Track header

Ok so I'm trying to get more efficient with logic and one thing I would like to know is why when I push apple key one and I open the arrange window
Even if I've gone into the arrange window in this song and I've set it up to display all header options , meaning track protect , freeze solo mute etc.... ,
Steven though I've gone through this process and I close that window ... Or even in a new arrange window on top of the correctly set window
Logic gives me an arrange window without these settings make me constantly have to got into view drop down and setting this up again
It's very frustrating and I'd like to know a work around
It's been a long time but when I started using logic six I believe there was a way to set this up by setting up the arrange and then using a key command
To capture the window
If that's correct I forget how to do it and would like some help
Thanks

Theodore Becker wrote:
Yea so locking my screen set doesn't work the track header ie the freeze button and protect button still don't appear in a new arrange even after setting lock from the screen set pulldown
Hi
Yep.... as I said, if you open a new Arrange window each time it will be at the default setup (see below for another method that may fix this for you)
The idea of Screensets is that you "re-open" 'your' Arrange (or other window setup) by recalling the Screenset, NOT opening a new Arrange window.
Try this:
Get the Arrange the way you'd like it, and then Lock the Screenset. (Note the Screenset number next to the Screenset Menu eg screenset 1). Change the Arrange layout, and then recall the Locked Screenset using the number keys (eg 1). The Arrange will reopen the way you locked it.
Alternatively, try this:
Open a new project and setup the Arrange Track Headers, open a second Arrange and setup these headers too. Close the second Arrange window. Now make a new (third) Arrange window... it will have the headers the way you set them, as will all new Arrange windows (works here on Logic 9.1.6 and OSX.7.2).
CCT

I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away.

Can't use mouse in track header/mixer area... gulp?

It seems I've inadvertently locked myself out of being able to edit/manage tracks in the header area-- anyone experience this problem? I can use keyboard shortcuts with no problem, and the cursor works in the bottom window, but anything from selecting a track to controlling track volume in the header is useless-- just doesn't respond. Anyone seen this before?
Thanks!

If you want to see the strategy status on the legend I think you should probably structure your table like the following:
Sub Focus Area Status Strategy Count
=========== ========= ========
Sub Focus Area 1 Implemented 23
Sub Focus Area 1 In Progress 5
Sub Focus Area 1 Not Started 3
Sub Focus Area 2 Implemented 28
Then the status will show up as a column that you should be able to drag into the legend area.
http://darren.gosbell.com - please mark correct answers

Setting up a pupil assement and tracking spreadsheet - how to go about it?!

Hopefully somebody will be able to suggest some ideas to my problem. I am a head teacher in the UK, and want to setup an assessment and tracking spreadsheet for the children in my school. Basically I want to be able to enter a curriculum level (1 to 5), three time a year (we assess each term) and enter a final level for the year, and then based on that level a predictive level for the end of year 2 and 6 when they leave – as well as an historic graph tracking their progress whilst in the school. I need to do this for each child in school and for each of the 12 subjects (though we only need to assess some once a year). I would also like to be able to glean from this information the average maths or English level in the school for a particular year for example and be able to compare a certain child to the average. Tracking the average score for a subject from year to year would also be beneficial – as it would alert should we need to focus on any aspect of the curriculum.
Here is my basic question - Even though I am only a very small rural school – with 50 pupils – I can’t fathom a way to set this up neatly – is it possible to do this. Do I create 50 sheets – one for each child – with all subjects on that sheet, and a level for every year in that subject? Or - Do I create 12 sheets – one for each subject – and have each pupil’s name there? Or do I create a fresh document for each subject! Another problem is that I need to promote the pupils at the end of a school year to a new class – and some children will leave and others will arrive.
I guess my question is - has somebody tackled anything like this before – or is anyone willing to suggest a way of setting this up so that it is both clear and efficient.

Gwyn,
I am sure that the solution offered here has over simplified your situation and that the scope of your problem is far more reaching. However, I offer the following as a starting point.
We begin with a Master List in which all levels for each student and subject are listed. I assume that your term "level" indicates the measure of a student's mastery of the subject. My abbreviated table shows only three subjects.
You didn't define how final levels were determined so I just averaged the three term levels in the "Final Levels" table. These formulas are header entered and are of the form:
=IF(ISBLANK(Student),"",AVERAGE('2008-09 Master List' :: B2:D2))
Each subject calculates an average final level in the footer:
=AVERAGE('2008-09 Master List' :: English Term 1:English Term 3)
You sought an above/below average number for Math and English and these are also header entered:
=IF(ISBLANK(Student),"",English-B$11)
And finally, a "Cumulative Subject Levels" Table shows the average final score for each subject over a span of years. (='2008-09 Final Levels' :: B11). As it stands, I envision this table on a separate sheet with whatever charts you require. I also picture a separate sheet for each year.
As I said in the beginning, this is a starting point. I look forward to your response.
pw

Spurious colours from RGB Curves and Track Matte...

Hello people of the forums.
I am working on a music video.
In a couple of places in the sequence where there are two or more visible layers overlapping with top layer/s having less than 100% opacity there is some unwanted 'extra' colours appearing which can be seen in the attached image below.
In the left image the unwanted colour appears in the center above the mans head, it is grey coloured.
In the right image the unwanted colour is the red.
All blending modes are Normal. There are Track Mattes in use. There are RGB curves being used.
As a result of trying to gather pertinent information for this post I found a cure, hahaha.
For the left images situation I found that turning the RGB curves off removed the colours, so I replaced the curves with Levels and the issue went away...
So for the right images situation I added a levels below the track matte and above the RGB curves, and the issue went away, no adjustment to the levels at all... I moved the levels from between the Track Matte and the Curves and the issue reapeared.
I will post this anyway but not as a question.
All the best
Peter

Hi Bill,
This is so weried I know how to do this where to point ect ect.
If i move the clip with the track matte on I get a crash.
I made a new seq and used same clip and it works. so I made a second clip next to it and it worked. I copyed those clips back to the old seq and it did not work...
It's been going on for a long time.. what do you know about seq setting with track mattes? do they only work well on some and porly on others.. all Ideas to find a answer.
answer to your above quest yes I am doing it right and why should I get a crash if I move the clip with the track matte on.
I think if we can answer that we will have fixed it.
over to you Bill
thanks for hanging in there.
Best
trevor

Can i listen to the track name and artist in my iphone like ipod shuffle using voiceover kit?

Hello People,
My question is, can i listen to artist and track name on my iphone 4s like Ipod shuffle using voiceover kit?
Thank You.

I have an Alpine radio with an iPod dock adapter to let me control my iPod through my head unit. This had worked great with my Nano, but I heard that these adapters didn't work well with the iPhones. Mostly due to interference / feedback from the phone being heard through the speakers.
However, I was suprised at the compatiblity mine had with the iPhone, especially being that it is a couple years old (the apadpter). When you plug the iPhone in it says that the device may not be compatible with the iPhone and that you should put the phone in "airplane mode." I just kept my nano plugged in as I thought that I didn't want the equivalent of turning my phone OFF when driving, so one day I tapped NO. Well, to my suprise, I did not hear any feedback or interference through my stereo. And, In fact, While I was driving, I received a call and the music stopped and the phone rang!
So, your mileage may vary on whichever brand adapter you use, but I have found that it works just fine for me. Hope this helps.

Customize video track header

I'd like to create a single-line track header layout, which shows the track name and contains the double click area to expand/collapse the track height. I managed to do so via "Customize" for the audio tracks, but it does not work for video tracks. In the latter the double click area stays always in the second line: as soon as I move the track header name to the top line and shrink the track height to one line, I can't access the double click area anymore. Is there a (hidden) solution?

Hi,
Please check the following article: http://technet.oracle.com:89/ubb/Forum70/HTML/000965.html
Hope this helps.
Regards,
Jatinder

Questions on Track Transpose and Score Layout

Hi all -
I'm posting these questions for my 14-yr old son who is the Logic Express user, so apologies as I might be asking the questions the wrong way. :-)
My son is writing an arrangement of the song Friday (Rebecca Black) :-) for his Middle School Marching Band. It sounds pretty cool so far, btw, and I have to admit the song is quite catchy. Haha.
Question 1: Is there a way to transpose a track independently of other tracks? As you know, some marching band instruments (flute, clarinet, etc) play natively in a different key, and he wants the appropriate key to show in the printed score. When he sets the key for a given track, every other track is changed as well, which won't work.
Question 2: When printing the score, is there a way to remove the bass clef? For some instruments (trumpet, for example) there are no notes in the bass clef and it's a waste to print the bass clef at all. He just wants the score to be more compact (and use less paper).
I hope I did his questions justice. :-) Any feedback would be very helpful! Thanks!

So I asked my son if I asked his questions correctly, and I guess I didn't. :-/ So, thanks, anyway, for reading. I'll be posting a different question shortly.
Mods: Please delete if needed. Thanks!

Mismatch of track-header and track

Similar Messages

Maybe you are looking for