Missed Calls (add prefix)

is there an automated way to prefix a "9" to the
"missed call" number without having to edit and manually adding the 9 ?
Yes I know ... lazy $%#, not me, this is a customer request.
thanks

That is the only way to do if you have H323 gateway however if you have a MGCP gateway no need for all that, go to service parameters and choose call manager and then click on the Advanced link on the right, there are parameters called National, International, subscriber and unknown number prefix, put in 91,9 whatever you want to prefix and you are done
The other way to do for an H323 gateway is to have translation rules on the router such as
translation-rule 1 ^0 910
translation-rule 1 ^1 911
and so on and reference the rule in the voip dial peer pointing to CCM

Similar Messages

Add prefix 9 for incoming calling number of missed call only.

Dear,
I am wondering how to add the prefix 9 to incoming calling number of missed calls only, not the calling alerting number on the phone screen. For example, the local user 472 2001 calls our DID 482 3001 along with the calling number 472 2001 on the dialed phone screen, if I missed this call, in the directory missed call I can see 94722001.
I know I can add the prefix in the field incoming called party subscriber prefix on the gateway page, but when I do this, all of the calling number information show 9.
Thanks,
Kirin

If I understand you correctly, you would like to only change the missed calls/placed calls on your phones without changing the digits?
If you have an PRI, you can use this translation rule to change calling ID only on inbound calls:
Translation pattern to modify Caller ID to add a 9
voice translation-rule 1
Rule # /match/ /set/
(^.= Match anything begining with any number)(*= one or more digits) tranlasate to (9& = Take whatever is in the match phase and plug it in here)
rule 1 /^.*/ /9&/ type subscriber subscriber (subscriber = ton(Ton=Type of number) value local area)
rule 2 /^.*/ /91&/ type national national (national = ton value long distance area)
rule 3 /^.*/ /9011&/ type international international (international = ton value international area)
Config t
voice translation-rule 1
rule 1 /^.*/ /9&/ type subscriber subscriber
rule 2 /^.*/ /91&/ type national national
rule 3 /^.*/ /9011&/ type international international
voice translation-profile INBOUND_PSTN
translate calling 1
voice-port X/X/X
translation-profile incoming INBOUND_PSTN
Let me know if this helps.
John

Adding prefix to Missed calls

Hi
Please Help me out here . My client wants to redial numbers coming in missed calls and received calls but calls are drooping when redialed.This is because number which shows on cisco phones is either 9XXXXXXXXX(LOCAL CELL PHONES) or 22XXXXXXXX but
Route Patterns ACTIVE as of now on CUCM:
0.[2-6]XXXXXXX -Local PSTN
0.[7-9]XXXXXXXXX -LOCAL CELL PHONES
I reffered few forums Disscussion and links but they are very confusing . We are using H323 AND MGCP (we want it on Priority) gateway where E1s terminated.
Please Suggest at earliest ,I Hope to resolve this soon with your help.
Regards

Option 1: Goto Service Parameters - Select the Server - Select Services Cisco CallManager - Click on Advanced, Now search for Incoming Calling Party National Number Prefix - MGCP and add your access code (9) which you use for dialing outside.
for H323 gateway:
voice translation-rule 1
rule 1 /^/ /90/ type national national
voice translation-profile incmng
translate calling 1
You can apply this translation profile to voice port (E1) or dial peer.
Suresh
Suresh

Add prefix on IP GSM gateway call

Hi I have a problem with my dial plan
I have a call manager on Cisco 3745 and Cisco IP phone and call and call is OK
I also have an IP GSM gateway, and I need to add prefix on all outgoing GSM call
For example if GSM number is 9002256 or 6220088, I need user to dial 4049002256 or 4046220088, the CME remove the prefix and forwarded cal to IP GSM gateway only with the real phone number: 9002256 or 6220088
For GSM incoming call, all incoming call should be forwarded to the standard user
I tried this configuration
telephony-service
call-forward pattern 9......
call-forward pattern 6......
calling-number local
transfer-system full-consult
transfer-pattern 9......
transfer-pattern 6......
dial-peer voice 6000 voip
corlist outgoing call2
session protocol sipv2
session target ipv4:10.6.3.8
dtmf-relay sip-notify
destination-pattern 4046......
dial-peer voice 9000 voip
corlist outgoing call2
session protocol sipv2
session target ipv4:10.6.3.8
dtmf-relay sip-notify
destination-pattern 4049......
But it doesn't work.
How can I make sure that CME remove the prefix 404 and send only 9...... or 6...... when he forward call to the Ip GSM gateway?
Thanks in advance for your help

voice translation-profile strip404
translate called 404
voice translation-rule 404
rule 1 /^404/ //
dial-peer voice 6000 voip
destination-pattern 404[69]......
translation-profile strip404 outgoing
no dial-peer voice 9000 voip

Please add a notification of missed call when we disconnect a in coming call in iPhone

please add a notification of missed call when we disconnect a in coming call in iPhone

speed301 wrote:
I got my first bill that included a full month of usage. I had almost $100 of international data roaming charges because I left my phone on while I was at work in Mexico.
I'm reading a lot of stories about people going on overseas vacations and coming back to $1000+ phone bills from data roaming charges.
I understand the terms of my contract. I understand how much international voice and data roaming costs. I'd also have no problems paying for them if I used them on purpose. However, when you set up the iphone to use Yahoo mail it periodically checks it whether you want to or not. If you set up gmail on your phone then you have the option to manually check it. (If I'm wrong, please correct me).
The obvious solutions are to either turn off Yahoo mail or leave it in Airplane Mode and hope that airplane mode actually works.
Fortunately AT&T made an adjustment to my bill, so I feel a little vindication but I'm sure it can happen again if I'm not careful.
Somebody should fix this.
You can have a Gmail account and still set your iPhone to check at certain times and you will receive your mail.
As far as the "fix".. There is nothing to fix.. You're the one that would need to call at&t to "temporarily disable" your data while traveling out of the country. Unless, you call them to set you up on an International Rate for a monthly fee while you're away!

Return calls without "EditDial" at directories received/missed calls

Dear sir,
Everytime we retrieve missed call or received call from "directories" softkey at ip phone, we will need to "EditDial" to add 9 in front of all number for calling out. Any way to automatically add a prefix 9 to it everytime we return call at missed call / received call, so that everytime we return call do not need EditDial. Hereby are attached 2 of the sample picture for better understanding.
Thank you very much.

Hi Charles,
Hope all is well with you :)
There is a nice step by step guide in this doc;
Add Prefix to the Missed Call Number
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml
Hope this helps!
Rob

I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.

I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

Only the number, not the name, is shown in the list of missing calls

When number X calls me I get the contact's name like this:
If I don't answer the call and go to the list of Missed calls, I will only find the number (not linked to the contact). Not the name of the contact.
This happens to contact with many numbers added. Could this be the reason?

Hi,
I am just giving the solution what I have done in my project. Hope this will help:
     DATA: BEGIN OF it_ccode OCCURS 0,
               bukrs TYPE t001-bukrs,
               butxt TYPE t001-butxt,
                 END OF it_ccode.
DATA: wa_ccode like line of it_ccode.
Select Company Code (bukrs) and Text (butxt) from table T001.
SELECT bukrs butxt
from t001
into table it_ccode.
LOOP AT it_t001.
    ADD 1 TO lv_index.
    ls_additional_data-fieldindex = lv_index.
    ls_additional_data-fieldname = 'FIELDNAME_KEY'.
    ls_additional_data-fieldvalue = it_t001-bukrs.
    APPEND ls_additional_data TO additional_data.
    ls_additional_data-fieldname = 'FIELDNAME_LABEL'.
    CONCATENATE it_t001-bukrs '-' it_t001-butxt
    INTO ls_additional_data-fieldvalue.
    APPEND ls_additional_data TO additional_data.
ENDLOOP.
And the form my fields binding is:
$record.FIELDNAME.DATA[*].FIELD
Try this out. Hope this will help.
Regards,
Amit

Nokia Lumia 520 'Unknown' missed calls

Hi there,
I have two missed calls in my call history from 'Unknown'. I can't click on it to see if there was a number to respond to or anything. I want to know if it is possible to change any settings that would allow me to view the number or to respond to the 'unknown' contact in case it was something important. Please help

I've had the same problem too, very annoying, and it seems to happen on all incoming calls if the phone number is not in my People directory - I doubt if all of these are blocking their numbers. Very frustrating as my clunky old Nokia dealt with missed calls beautifully - I could see them, and i could add them to my contacts.
I am waiting for someone to "prank" me so that I can get their number but i now see that won't work.....

I think there is a flaw in ios 5. Notification centre doesn't show missed call, during another call is in progress, after accessing recent calls in phone app, once.

Notification centre in ios 5 is not showing the missed calls when another call is in progress. It shows perfectly before accessing the phone app. But once you access the recent calls in phone app, then afterwards it stops showing the missed calls during another call is in progress.

Forgot to add, this happens, when you receive a call, during the phone is locked, and you receive a call, while the previous call is in progress.

Configure : add prefix and remove prefix

Hello.
I have 4 pods in our voip netowrk.
Each pod have owner PBX system.
But they have complex dial plan.
So I have to configure as simple as possible.
Thus, I have good idea to resolve.
In my opinion, I'm gonna give prefix number both of them. Pod-A is 1, Pod-B is 2, Pod-C is 3, Pod-D is 4.
for example, I'll add prefix 1 all phone number entering from pod-A's pbx to gateway in pod-A on pots dial-peer.
When the call flow pod-B, I'll strip the prefix 1 from gateway in pod-B to pod-B's PBX on pots dial-peer.
Is it possible?
Actually, I had a test, but i couldn't success it....
may be...wromg configuration...
Could you please advice to me to reslove? and any other good idea?
Regard,
John.

Hi John,
It is important to note that the DNIS you receive from the PBX really should have the pod code prefixed before the gateway receives it. It is important because you have complex dial plans and you will be very limited by the number of translations you can perform on each trunk.
This is a very simple example, but it should give you some idea of how this will work.
Dial-peer 10 is the inbound pots dial-peer on the source gateway. Dial-peer 20 is outbound to the POD A gateway.
Dial-peer 30 is the inbound voip dial-peer on the POD A gateway. Dial-peer 40 is the outboud pots dial-peer on the POD A gateway. You will replace ....... with the correct number of digits or the T parameter if the digit strings are variable.
direct-inward-dial may be required on pots peers if the interface supports DID.
On source gateway:
dial-peer voice 10 pots
port x/x
dial-peer voice 20 voip
destination-pattern 1.......
session target ipv4:
dtmf-relay h245-alpha
codec g711ulaw
no vad
On Pod A gateway:
dial-peer voice 30 voip
incoming called 1.......
codec g711ulaw
no vad
dial-peer voice 40 pots
destionation-pattern 1.......
port x/x:x
Again, if you must prefix/translate in the gateway then you'll be limited by the number of translations (15) you can configure per trunk.
Here's some examples of how to prefix the DNIS. I'm assuming PodA numbers begin with 555321, PodB 666321, and PodC 777321. Of course this will depend on your dial plan.
voice translation-rule 1
rule 1 /$555321$$.*$/ /1\1\2/
voice translation-rule 2
rule 1 /$666321$$.*$/ /2\1\2/
voice translation-rule 3
rule 1 /$777321$$.*$/ /3\1\2/
voice translation-profile podA
translate called 1
voice translation-profile podB
translate called 2
voice translation-profile podC
translate called 3
dial-peer voice 10 pots
translation-profile incoming podA
port A/A
dial-peer voice 11 pots
translation-profile incoming podB
port B/B
dial-peer voice 10 pots
translation-profile incoming podC
port C/C
Michael
Let me know if this helps by rating the post.

Cisco 69xx missed calls as service URL at a feature button

Hi,
can anybody help me to use "Missed Calls" as a service URL (Standard IP phone service) at a Cisco 6941 at a feature button?
Referring to this thread (https://supportforums.cisco.com/thread/1003641) it should work at a Cisco 69xx phone.
I just copied the phone service "Missed Calls" and changed "directory" to "Standard-IP-phoneservice".
The service URL I don`t changed and it`s still "Application:Cisco/MissedCalls".
When I try to use this copied phone service at a Cisco 6941 as a URL at a feature button next to the line-button I always get back a XML-error.
Is the service URL "Application:Cisco/MissedCalls" still correct when I try to use Missed calls as a Standard IP phoneservice?
The load at the Cisco 6941 is SIP 9.3.3.2.
I also tried SCCP instead of SIP but it`s still not working.
BR
Michael

I think I found something. I tried it on CIPC - SCCP, nothing was displayed on the Phone when the button was pressed. Testing with other phone models now.
Here are the instructions if someone else is also intrested:
Adding an IP Phone Service to a Phone Button If you want to do so, you can assign the service to a phone button (a speed dial button) that is configured as a service URL. By default, the IP phone service can display under the Directory, Message, or Services button/options on the phone, depending on your configuration in the IP Phone Services Configuration window, so you only need to add an IP phone service to a phone button if you want the service to display as a speed dial. You can only perform this procedure for IP phone services that are not marked as enterprise subscriptions. Perform the following steps to add a service to a service URL button. Procedure
Add the service to Cisco Unified Communications Manager (see IP Phone Service Configuration Settings).
Customize a phone button template by configuring a Service URL button (see the "Phone Button Template Configuration Settings" section on page 73-1).
Add the customized phone button template to the phone (see the "Configuring Cisco Unified IP Phones" section on page 67-30).
Subscribe the service to the phone (see the "Configuring IP Phone Services" section on page 67-35).
Add the service URL to a phone button (see the "Configuring Service URL Buttons" section on page 67-38).

Cisco 69xx missed calls as service URL at feature button

Hi,
can anybody help me to use "Missed Calls" as a service URL (Standard IP phone service) at a Cisco 6941 at a feature button.
As discussed in this thread it should work -> https://supportforums.cisco.com/thread/1003641
I just copied the phone service "Missed Calls" and changed "directory" to "Standard-IP-phoneservice".
The service URL I don`t changed and it`s still "Application:Cisco/MissedCalls".
When I try to use this copied phone service at a Cisco 6941 as a URL I always get back a XML-error.
Is the service URL "Application:Cisco/MissedCalls" still correct when I try to use Missed calls as a Standard IP phoneservice?
The load at the Cisco 6941 is SIP 9.3.3.2.
I also tried with SCCP instead of SIP but still the same error.
BR
Michael

I think I found something. I tried it on CIPC - SCCP, nothing was displayed on the Phone when the button was pressed. Testing with other phone models now.
Here are the instructions if someone else is also intrested:
Adding an IP Phone Service to a Phone Button If you want to do so, you can assign the service to a phone button (a speed dial button) that is configured as a service URL. By default, the IP phone service can display under the Directory, Message, or Services button/options on the phone, depending on your configuration in the IP Phone Services Configuration window, so you only need to add an IP phone service to a phone button if you want the service to display as a speed dial. You can only perform this procedure for IP phone services that are not marked as enterprise subscriptions. Perform the following steps to add a service to a service URL button. Procedure
Add the service to Cisco Unified Communications Manager (see IP Phone Service Configuration Settings).
Customize a phone button template by configuring a Service URL button (see the "Phone Button Template Configuration Settings" section on page 73-1).
Add the customized phone button template to the phone (see the "Configuring Cisco Unified IP Phones" section on page 67-30).
Subscribe the service to the phone (see the "Configuring IP Phone Services" section on page 67-35).
Add the service URL to a phone button (see the "Configuring Service URL Buttons" section on page 67-38).

Missed calls as service url at 6941 doesnt work

hi,
i'm configured the preinstalled phone service "missed calls" from cisco as standard ip phone service and put it at a service url phone button. at a 79xx phone this works fine, i press the button and the "missed call" list appear. if i configure the same at a 6941 phone at first the service doesnt appear at the service list at phone and at second, the service url button is right at the phone, but if i press it, the message "Error!: services unavailable" appears.
CUCM is 7.1.3
phone loads for 6941 is 8.5.3
somebody can help?

I think I found something. I tried it on CIPC - SCCP, nothing was displayed on the Phone when the button was pressed. Testing with other phone models now.
Here are the instructions if someone else is also intrested:
Adding an IP Phone Service to a Phone Button If you want to do so, you can assign the service to a phone button (a speed dial button) that is configured as a service URL. By default, the IP phone service can display under the Directory, Message, or Services button/options on the phone, depending on your configuration in the IP Phone Services Configuration window, so you only need to add an IP phone service to a phone button if you want the service to display as a speed dial. You can only perform this procedure for IP phone services that are not marked as enterprise subscriptions. Perform the following steps to add a service to a service URL button. Procedure
Add the service to Cisco Unified Communications Manager (see IP Phone Service Configuration Settings).
Customize a phone button template by configuring a Service URL button (see the "Phone Button Template Configuration Settings" section on page 73-1).
Add the customized phone button template to the phone (see the "Configuring Cisco Unified IP Phones" section on page 67-30).
Subscribe the service to the phone (see the "Configuring IP Phone Services" section on page 67-35).
Add the service URL to a phone button (see the "Configuring Service URL Buttons" section on page 67-38).

How to add prefix zero to all matnr fields in itab

Hi,
I ve a internal table with following fields
Matnr                                                  bwkey
6                                                        678
67                                                      rty
678                                                    78k
How to add prefix zero to all tha matnr fields.
like
matnr                                     bwkey
00000000000000006                678
00000000000000067                rty
00000000000000678                78k
Thanks in advance

Hi,
commonly used conversion routine is ALPHA.
It is conversion used to insert leading zero for document number.
For example, in sales order (VBAK-VBELN length 10),
when we key in order no, for example we key in '4302',
conversion routine input will automatically add leading zero,
so it will become '0000004302', this is real value stored in table VBAK.
On conversion routine output, it will delete leading zero
function CONVERSION_EXIT_ALPHA_INPUT, this will add leading zeros to a character based field of any length.
Ex:
data: lv_c(10) type c value '123'.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
          exporting
                  input = lv_c
          importing
                 output = lv_c.
write:/ lv_c.
Regards.

Missed Calls (add prefix)

Similar Messages

Maybe you are looking for