Missing audio in Video when adding Transition

Hi!
I'm new to flash 8, and trying to learn video playback in
Flash, and I have one question: I've added a transition effect
between 3 videos, and when I play the swf file, the audio is
missing in the 3 video's.
Is it so that audio automaticly dissapear when I add
transitions?
Thanks for any answer...

My actionscript is below, if that helps anyone. I don't know
if this is a stupid question with an obvious answer, if so please
let me know:-)

Similar Messages

  • Final Cut Pro X crashes when adding transitions, throughout the entire program.

    I've had FCP X installed for a few weeks now, and I decided to hold back asking my question and see if anybody else is experiencing the same problems.
    I did find one matching problem on the discussions forum, but the user found a solution which I tried, and did it did not work.
    Everytime I try to add a very simple transition to my video in Final Cut Pro X, it gives me the spinning colorwheel, hesitates for a few seconds and then crashes.
      It only does it with transitions, I can add effects, adjust color, etc. but only when adding transitions does it crash.
    I've tried deleting events and original media, I've reimported using optimized media, I've tried both ways of keeping files in original locations and also copying to final cut events folder.
    The video I'm using is full 1080p mov files from a Canon 5D Mark II.
    It does it in the timeline as well as the secondary timeline.
    I've tried the solution that the previous asker did, which was copying the content to another FCP event, and it didn't work for me. Still crashes whether I try to drag the transition to my timeline, use the keyboard shortcut, or double click.
    I have a Early 2010 15 inch MBP i5 with 8gb of RAM running newest version of Snow Leopard.
    Hope I've provided enough information
    Thanks,
    -Jon

    Same Issue: Added a transition and then beach ball from **** and crash. Also lost two hours of work when it restarted and reverted to the last planned quit.
    FCPX is benched until Lion and updates. Don't have time to be a beta tester on what might end up being a hobbyists toy.
    MacPro Quad 3.0, 10G RAM.
    Mark

  • Ipad background audio from video when multitasking

    Hello.
    This is a request if people can either feedback On their present experience or try this out themselves first and feedback.
    I have an ipad 1. When ever i try to get background audio to play from video when multitasking in another app, eg safari, from any video app including plex, airvideo, vlc,  and the original apple video app. All that occurs is that the icon changes to the ipod and a random song is played from my music library instead of the audio from the video i was watching. This does not matter if the video file is streamed or stored on the ipad itself.
    There is one slight and occasional proviso to this, as at times if the video file is tagged in itunes as 'music' rather than 'movie' or 'tv show' etc then it does on occasions work, and on occasions youtube videos will play in the background. But most of the time these aspects also dont function int he background with the ipod icon instantly replacing which ever video app icon i tried to use in the background.
    Now my sons iphone 4 manages to function correctly and always plays video in the background when multitasking.
    I have asked this question before on this forum, with no response, so booked a visit to my local genius bar. Where they checked my ipad and agreed it wasnt working as ios should, then interestingly they attempted to do the same on an ipad 2 and it failed to work in exactly the same way.  Their response was that this was obviously a fault of the ipad ios, possibly due to the ipad having a separate video app where as the iphone has video within its generic ipod app.
    I did the usual by informing apple via of this bug through the feedback system, and requested that the genius bar do the same. But having thought about this, and failed to see any other users on this forum who are also puzzled at this lack of what i think is an important function, i wonder if this means that i am the only one who likes to listen to video when im browsing, so dont need it, or wether everyone elses ipads function as ios should do, and for some reason both my ipad, and the ipad 2 tested in the shop are at fault.
    So can i request if others reading this can have a go to see if their ipad will play background audio from video when multitasking, or if the same problem occurs.
    Thanks very much this is really appreciated.

    Oops clicked the wrong button, I meant to click a 'helpful answer' as it  hard to have a correct answer to such a question.
    But thanks for the replies.
    It looks like this is a bug in ios solely for the ipad, as it does work fine on the iphone  although wonder which way the ipod touch will perform. interestingly it looks like i may also be in the minority of wishing to listen to video files as I browse:)
    Which probably means apple may never get around to sorting it, as no one else uses the function.
    Anyway thanks for the replies, if any one else wants to see the bug have a go and comment, i find it funny how I seem to be the only one to have found it to date.
    R:)

  • [SOLVED ]SX10 TC7.3 no audio and Video when calling

    Hi,
    I have very wierd issue with one sx10(TC7.3.0) endpoint. When I make a call to another sx10 (TC7.1.4) then signalling works fine and call is connected but there is no audio and video.It is not working even when I call to some external different type video endpoint. I noticed that there is no receiving info about audio and video but transmit codecs and other info looks correct. 
    Hope someone can help me to troubleshoot the problem.
    More info about my solution:
    I use CUCM with VCS-c and VCS-E. All endpoints are registered to CUCM. I have 16 SX10 endpoint with TC7.1.4 and one TC7,3,0. I think upgrading all endpoint to TC7.3.0 is not the solution because there are problems also with all other types enpoints.

    Yes, Actually the problem was firewall rule! 
    The main problem was that these two endpoints didnt saw each other. ( Ping - Packet loss )
    Signalling was working fine because both of them got ping CUCM but not each other :)
    So problem is solved.
    Thanks.

  • No audio or video when exporting movie

    I have both CS5 and CS6, running on a mac with OSX 10.6.8 a 2.3 Ghz i7 processor and 8 Gig RAM I'm getting the same result in both CS5 and CS6, I'm trying to export an edit that was shot on a Canon 7D. When I choose "match sequence settings" the resulting file is the correct lenght but has no audio or video. It's completely blank. Any ideas?

    Any ideas?
    Don't use Match Sequence Settings.  Take manual control over your exports, make sure you have the correct settings.

  • Audio files split when adding video

    hello. sometimes when i add video to the timeline, the audio tracks seem to split. why is this and can i turn that feature off because it gets annoying after awhile.

    How split? Use the patch panel to set which tracks get sent to which destination. Link a1 to A1 and a2 to A2 if that's where you want it to go. If you want it to go someplace else set the patches to different track destinations.

  • Having issues when adding transitions to FCP7

    Hey, I'm editing a short film and I've been having some issues whenever i add in a transition (cross/dissolve) to any of the clips and go to play them back it has a glitch, not very familiar with FCP a complete newbie at this..Tried exporting it out to qt and the glitches got even worse...it totally freezes up and throws off the audio track completely or it will stay frozen but the audio keeps playing. I'm fairly new to this program and so i may not have the correct terminology but could really use some help.. This is my final project for graduation and right now i'm pretty stuck any help would be greatly appreciated. I included a few screen shots to explain what actually happens as the video plays out. Oh before I export it when i'm working on it on FCP it doesnt look that bad, it just kinda jumps a bit when the scene with the transition plays.

    Hi
    thanks for your response, sorry I hadn't responded but it worked and it's now working perfectly again. TY

  • Lion to Snow Leopard missing audio during video chat

    Hello,
    After upgrading one of my MacBook Pros to Lion, I've been encountering a consistent problem when attempting to engage in a video chat with my parents who are using a MacBook that is still running Snow Leopard.
    Prior to the Lion upgrade, video chats worked flawlessly, but after the Lion upgrade, the audio coming from the Snow Leopard machine is completely gone. Video alone works fine in both directions, and the Snow Leopard client is receiving audio from the Lion client, but the Lion client is not receiving any audio from the Snow Leopard client according to the iChat connection doctor.
    Not a missing update/firmware issue-
    Both machines have all the latest OS updates applied.
    Not a hardware deficiency issue-
    Both machines were able to engage in flawless video chats using iChat prior to one machine being upgraded to Lion.
    Not a bandwidth issue-
    MacBook Pro (Lion) is hard wired to an ethernet connection which ties into a fiber optic connection 100Mbit/100Mbit (down/up).
    MacBook (Snow Leopard) is hard wired to an ethernet connection tied into a AT&T Uverse connection 24Mbit/3Mbit (down/up).
    As a troublshooting step, each machine was tested with iChat bandwidth limitation set to 500k, 1Mbit, and 2Mbit.
    Not a ports issue-
    As a troublshooting step, both machines were placed into each respective LAN/WAN DMZ.
    Not a firewall issue-
    Both machines are not running with a firewall enabled.
    Not a network configuration issue-
    Video chat continues to work flawlessly between Snow Leopard only clients from the same networks over the Internet (tested with additional Snow Leopard clients on my end that have yet to be upgraded to Lion).
    Not a microphone or sound configuration issue
    First thing checked, double checked, and checked again.
    After checking the connection doctor within iChat during one of the problematic video chats, it reveals that "audio quality" from the Snow Leopard client is always 0%.
    Has anyone else encountered this problem?  Moreover, is there a solution?
    BTW, Facetime video calls between all clients work fine, but we all hate Facetime and prefer to continue using iChat.
    Any help would be sincerely appreciated.
    Thank you.

    Hi,
    SoundFLower is an Add-on to the System that then appears in the System Preferences > Sound pane as well as being an App.
    It allows the Mic (or input device) to be used by two apps at once.
    It can also take the output of one app and get in to another.
    Sound.
    IN certain versions of iChat and with certain Headsets you can have issues if the iChat is set "first" the the System Preferences are set Second.
    In both iChat and System Preferences > Sound > Input chose any other device/input other that the propsed headset.
    The chose the Headset's mic for the System Preferences
    Now set the mic for iChat
    Repeat for System Preferences > Sound > Output and the Headphone side.
    What is Arriving
    Whilst a chat is going on open the Connection Doctor (Video Menu)
    On the Stats tab/button you will get a live read out of Bitrate and Framerate and a visual representation of the incoming Video and Audio feed.
    Bit rate will vary based on what you pay for and what the Bandwidth Settings is. (you can change it "Live" during a  chat and see the Buffering change the rate slowly).
    The Framerate should be at least 15fps
    Intels can be higher whit 30fps being the top rate.
    The Visual bars should be green and 100%
    They may vary if your service varies to much.
    Buffering
    Any Internet service will vary.
    iChat has  buffering mechanism to cope with this
    Earlier versions of iChat were limited by the Quicktime Streaming setting that used to be in System Preferences (Up until Leopard).
    Now iChat and Messages can make use of All your bandwidth.
    The Buffering will drop frames in an effort to keep up if someone is sending more data than you can handle.
    There comes a point when it judges it will lose sense of the Audio due the number of dropped frames and it will cut the Audio.
    If the Audio bar is showing nothing then check the Bitrate.
    Let me know what you see.
    Comparisons with you other computer would be useful.
    9:21 PM      Monday; October 8, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My laptop won't let me play audio or video when connected to my tv

    I have an HP Pavilion G61-429WM and it used to work just fine when connected to my tv. Then a couple of weeks ago it just wouldn't play any of my downloaded movies. I went on Itunes and it wouldn't play the music. Then, I went to youtube and it wouldn't even let the video play although the sound did come from the laptop.  Like I can surf the web and the prgrams and whatnot but whenever it comes to video and audio it kind of just freezes..Help??

    I got a solution
    First check out your performance settings and if u dont know where to find it just right click on my computer and enter to propreties then click on performance and tools, then if the gamming and desktop aero system are 1.0 then you have three solutions.
    1) Install a new windows
    2) check out your computer driver and install tge latest version
    3) or simply you can download DRIVER PAC SOLUTION and install it then after installation is done you might wanna restart the system and check performance again then it should desplay NEW HARDWARE DETECT REFRESH NOW then click on refreah and the rating is gonna go up from1.0.to higher than 4.0.

  • ERROR ITMS-9000: Missing Code Signing Entitlements when adding app to Apple App Store

    My client is getting the following error when sending my app (compiled in Flash Pro CC 2014 with AIR SDK 15.0.0.356) to the Apple app store:
    ERROR ITMS-9000: "Missing Code Signing Entitlements. No entitlements found in bundle
    'com.xxxxxx.xx.xxx' for excutable 'payload/xxxxx.app./xxxx'.""
    He is saying that I need to send them the entitlements file.
    I can't find out any information about this with regards to Adobe Air compiled iOS apps, apart from this old post:
    Adding iOS entitlements to AIR apps
    which states that 'the packager configures the entitlements file '
    Can anyone explain what might be missing here?
    Thanks,
    Alan.

    It looks as if this problem is solved by doing step 2 from here:
    http://dev.mlsdigital.net/posts/how-to-resign-an-ios-app-from-external-developers/
    It basically states that the client needs to produce the entitlements file and lists the following that the client will provide themselves:
    A “Mobile Provisioning Profile”
    An “Entitlements.plist”
    An “iOS Distribution Certificate”
    iReSign OS X app (or you could use command line)
    Hope this helps someone. We've run into quite a few problems trying to get the Flash Air compiled App to both enterprise and Apple Store as it can't come from us (the developers) it has to be signed and delivered from the client.

  • Final cut bug, interlacing when adding transitions

    Hello
    So I have been experiencing a problem in final cut pro 6 when generating a timeline using motion jpeg A and using transitions that all clips end up looking interlaced. The fields in the sequence settings are set to non and all the settings are at high quality. All preferences and settings have been checked a hundred times over. Even soemtimes in the past generating a new sequence and copying your timeline to the new sequence would sometimes resolves some problems.
    After weeks of banging my head against the wall I managed to find out that importing quicktimes into final cut would default the field on every quicktime to upper odd, causing this problem. Changing this option to none seemed to fix the problem. In saying this, this is not ideal as if you were working with say 40 quicktimes or more you would have to manually change each field to every quicktime before you start your timeline. Not good.
    Has anyone else experienced this problem and if so have you found a better way around it?
    Thanks

    Same Issue: Added a transition and then beach ball from **** and crash. Also lost two hours of work when it restarted and reverted to the last planned quit.
    FCPX is benched until Lion and updates. Don't have time to be a beta tester on what might end up being a hobbyists toy.
    MacPro Quad 3.0, 10G RAM.
    Mark

  • Premier Pro deletes denoiser effect on part of audio on video when exporting

    I am working with a project that has really bad audio. I have edited and used many noise removal tools in Adobe Audition CC and Premier Pro CS6 (Noise remover, EQ, and Denoiser) which had removed the majority of the noise on the audio. However, after exporting this project and playing it in Quicktime, Premier has seemed to discarded these noise removal effects in the first 5 seconds of the video.
    To try and resolve this, I cut up the first 5 seconds and applied an additional denoiser effect to see if this would help. However it did not, and Premier completely disregarded all of the sound removal in all of the exported clip.
    Does anyone know why it is doing this and how I can resolve this?

    I would like to second this.
    I used noise removal. My video is multiple different interviews. There are 5 cuts, to five different audio/video clips, each with noise removal effect on them. but, Only on 2 of the cuts, in the final export, for 3 seconds, the noise removal effect seems to "not work" when the clip starts, then it kicks on gently for the remained of the clip. (similar to what Khalil Jammal said, which is why I'm posting this.
    Again, the noise removal fails to "start" only on SOME of the cuts/clips in the final export. It kicks on after about 2 or 3 seconds.
    This is odd...it's as if the noise removal effect is having trouble communicating with the final export render. I don't get it. For now, i will have to go back to my "old way" of exporting the audio, cleaning it up in my DAW, then importing it back into Premiere.
    This is also annoying as I am paying like, $30 a month for Premiere. This does not seem like something we should have to "work around", but rather, Adobe should fix this issue.

  • Only imports audio, no video when using DSLR .mov files

    I just upgraded to CS6 on my Mac Lion. I created a project using the DSLR settings and tried to import a .mov video clip taken from my Canon 5D camera. Strange thing is it only imported the audio and not the video. I tried many of clips and just audio.
    As tests, I tried importing a .mpeg clip from an HDV camcorder and it worked fine. I also changed the extension of the DSLR clip to .mpeg and it still didn't work. The DSLR clips imported fine in CS4, but not CS6. Also as another test, I tried importing on a different Mac computer using Premiere Pro CS6 (from creative cloud) and it imported perfectly. So I'm not sure why it's doing it on my computer? The files open fine in QuickTime.
    The only thing that worked was I exported the .Mov files from the DSLR to a HDV .Mov file and it DID import correctly. I don't want to have to go through that step everytime though (or loss the quality)
    Any ideas why this is happening? Thanks

    I too am having this problem.  The video I am trying to import is a .MOV file from a Canon 5D Mark III.  When I check the properties of the file in Premiere Pro 5.5, this is what it says:
    File Path: S:\Photos\5D mark 3\Video\0F2A0089
    Type: QuickTime Movie
    File Size: 55.7 MB
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:00:15:07124
    Average Data Rate: 3.7 MB / second
    QuickTime Details:
    Movie contains 1 video track(s), 1 audio track(s) and 1 timecode track(s).
    Video:
    There are 453 frames with a duration of 1/29.97th.
    Video track 1:
    Duration is 454
    Average frame rate is 29.91 fps
    Video track 1 contains 1 type(s) of video data:
    Video data block #1:
    Frame Size = 1920 x 1080
    Compressor =
    Quality = Least (1.00)
    Audio:
    Audio track 1 contains 1 type(s) of audio data:
    Audio data block #1:
    Format = 16 bit - Stereo
    Rate = 48000 Hz
    Compressor = sowt
    Timecode:
    Timecode track 1 contains 1 type(s) of data:
    Timecode data block #1:
    Start Time = 00;00;39;04
    Reel name =
    As you can see PP 5.5 notices the video; it even tells me the # of frames in the video but it won't display it. It might be worth saying the video files from my Canon XF100 work just fine.  This is extremely frustrating.  Any help would be very much appreciated.

  • My iPod Touch 3G 32GB from 4.2.1 to 4.3.2 cannot play the audio of videos when it's hold and after clicking Home button twice to play audio of the video,why?

    When I hold down my iPod Touch 3G 32GB with 4.3.2 I can't play the audio of the video neither clicking play when it's hold why?

    It's a limitation from 4.2.1 for iPhone 3GS and iTouch 3G and not for new devices as iPhone 4, iTouch 4G and iPad 2?

  • IMovie shutting down when adding transitions.

    I Can start the app and create a new project fine and can also add video to the project. when I start splitting the movie into segments everything is fine until I click to add a transition to the split. It is then that iMovie closes down every single time  I have restarted the app reset my phone and even reinstalled the app and it still does it. I am using it in the iPhone 6 plus on iOS 8. Any help would be appreciated.

    Hi Sue,
    recently. I also got the same problem abt iMovie HD and while searching the discussions, I have seen your suggestion for similar problem.. I followed it and now it is working very well.
    Thank You..
    I have another problem in my mac. There is a white vertical line showing up on the desktop for a while.. and recently another white line parallel to it also created and now I have 4 vertical lines on desktop which spoils the beauty of the mac. Do you know how to get rid of them? Mine is iMac, 10.4.9, 1.83GHz, Intel core Duo, 1GB memory.
    Your suggestion will be greatly appreciated. My e-mail ID is [email protected]
    Thank You
    Murthy
    iMac4, 1   Mac OS X (10.4.7)   Intel Core Duo
    iMac4, 1   Mac OS X (10.4.7)   Intel Core Duo
    Welcome to discussions, viewfinder:)
    Be certain to follow Bengt's good advice:
    Quit iMovie.
    Locate a file named com.apple.iMovie.plist and get
    rid of it. iMovie will create a new one the next
    time it runs. Empty the trash and run a permissions
    repair from the Disk Utility folder.
    The files are located here:
    -->/Users/YourName**/Library/Preferences/com.apple.iM
    vie.plist
    Also, please answer regarding the amount of free
    space you have left on the Mac.
    :)Sue
    iMac4, 1   Mac OS X (10.4.7)   Intel Core Duo

Maybe you are looking for