Missing BIOS updates in Update Retriever

Hello,
When I do a search in Update Retriever 5.00.0010 for  
Lenovo M92         2121 / Windows 7
Lenovo M82        2929 / Windows 7
Lenovo M82        2756 / Windows 7
A lot of updates is shown, but no Bios Updates , how come? (I'm almost sure that once I was able to see these bios updates, I have tried to rebuilt a new repository, starting from scratch but to no avail)
And searching for Lenovo T61  6458 /windows 7  shows a JP Bios but no US version.
Can anyone confirm that this is a general issue?.
Kind Regards,
Jakob

So no one has any information on how to maintain a clean repository?

Similar Messages

  • Updated bios via Live Update and now my Network card isn't detected

    I have an msi Z87-GD65 Gaming Motherboard and I updated some drivers and the bios via msi Live Update 6 last night and now my computer refuses to recognize my network adapter. The adapter is a TRENDnet N600, plugs into PCIe if I'm not mistaken. Wifi if my only option with this computer, I can't use ethernet, so it's really important I get the network card working again. I have had zero issues with it until this.
    The reason I was updating was to try to get my third monitor to work when plugged into the mobo, while my other two were plugged into the graphics card (which I also installed yesterday, but it's working fine). Note that it still was not working, but I had enabled the IGD Multi-Monitor from bios.
    Any suggestions would be appreciated. I did try uninstalling the drivers but it still won't detect the network card. I also tried disconnecting and reconnecting the network card (and I cleaned the port for good measure).
    I've only been using Windows computers for a year, so bear with me if there's stuff I don't know. Thanks in advance. I can try to get a full list of what was installed later tonight, but all of it that I can find has been uninstalled at this point.
    Note: I did not flash the bios when I installed, which I have now heard is a bad idea, apparently. l:

    what OS you are running?
    Quote
    Note: I did not flash the bios when I installed, which I have now heard is a bad idea, apparently. l:
    you said you've updated drivers & BIOS:
    Quote
    I updated some drivers and the bios via msi Live Update 6 last night and now my computer refuses to recognize my network adapter.
    can you clarify is you update BIOS too or not?
    and what is your current bios version?
    Quote
    and I updated some drivers
    what kind of drivers?
    Quote
    I did try uninstalling the drivers but it still won't detect the network card. I also tried disconnecting and reconnecting the network card (and I cleaned the port for good measure).
    have you tried to load last good known configuration or the last windows restore point?
    or to reinstall OS?

  • "The SPListItem being updated was not retrieved with all taxonomy fields." Exception while updating a taxaonomy field

    Hi All,
    I'm getting this exception "The SPListItem being updated was not retrieved with all taxonomy fields." when i try to programatically update a taxonomy field of a list item. Can any1 pls tell me why this exception occurs ???

    Recently hit this myself, as well.  Turns out it's a central admin setting that throttles the lookup return count, and Taxonomy fields are just lookups under the hood.
    Go into Central Administration, Manage Web Applications, select your web application, and then in the ribbon choose the dropdown under General Settings select Resource Throttling.  Find the setting for "List View Lookup Threshold" and raise
    it from the default 8 (can go up to 1000, but 20 is likely fine depending how many lookup fields you're pulling back in your SPListItem).

  • My URL/Address bar is missing after the delicious update. My search engine bar is missing after the Delicious update. I cant figure out how to turn them back on. rhouwan@*****.***, thank you.

    My URL/address bar is missing after the Delicious update.
    My search engine drop down menu is missing after the Delicious update.
    I can't figure out how to turn them back on, please advise, thanks.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Has anyone else gotten an email supposedly from Apple saying you had missing data and to update? I went to update, gave some info only to see they wanted my credit card info and money. How do I report this and to whom. Impossible to contact Apple.

    Has anyone gotten an email saying your system was missing data and to update? I went to update, gave my email and password just to find it wasn't really Apple
    but, wanted my credit card and money. Did not follow up. Where and how do I report this to Apple. Seems impossible to contact them.

    Forward it to [email protected] and then delete it.
    (112838)

  • New ITunes...systematically misses one file when updating TAGS of an album

    With the latest version of ITunes (811) I am confronted with an annoying behaviour.
    I like to have comprehensive TAGS when I import an album...proper GENRE, name of ARTIST, YEAR, album COVER and so on. So I always verify, and if necessary update the tags.
    Now, with ITunes 811, it always misses one of the tracks from the list of tracks I want to change.Consequently, I need to select this track and perform the complete cycle of Tag editing again...twice as much work, and a genuine irritation.
    Any solution, known bug?
    Thank
    Patrick

    Just wanted to add my 2 cents...
    The original poster of this thread says it started on iTunes 8.11...well I'm using iTunes 10.1.2.17 and it's still doing it for me and has been for AGES. It is really frustrating. I highlight a whole album and add all the tag info because I am really pedantic about all of it being organized and all with proper names, artwork, etc.. Not every time but I'd say fluctuating between 50-100% of the time and normally about 90% of the time it will miss tag updates on one of the tracks. Normally the last one or towards the end of the album but it could be any, really. So what I do is I highlight the album, update the tags, click ok. Then before I even check if there's one track that didn't get the updates, I just immediately click 'Get Info' on all of them again and sure enough the tags will be empty on all the ones I just updated. This is because one track didn't get the updates so iTunes sees the selections as having one or more different values. So I put in all the values again. This could happen for any of the tags I update, including album artwork. So basically, when I do tag updates for an entire album I just always do the updates twice. I could search through and find the actual track missing the updates but I've found that this takes even more time. On the off chance that when I click 'Get Info' the second time and see that all the tags are updated I then jut hit cancel and move on, as I clearly don't need to put the tag updates a second time. But that hardly ever happens.
    What's interesting is that before, without fail, one track would miss the updates and all the updates I did. So if I updated Artist, Album and Genre then one track would miss them all. Now sometimes the one track that missed the updates will pick up one or more of the tag updates but not all. This is actually more frustrating because it means when I highlight the entire album for the second time it gets confusing because my eye will quickly catch that some of the tags were updated, leading me to believe that 100% of the tracks caught the updates that first time but really if I look more closely I see that a couple of the tags didn't get updated.
    There's actually a few buggy little issues like this in iTunes that I've noticed haven't gotten fixed over update after update after update of iTunes from Apple. I don't get it....
    Also, why can't you add MULTIPLE artwork to more than one file at once? If you highlight an entire album and want to add the artwork for the front and back and CD of the album, then you have to choose one, and only one, picture which will obviously be the artwork for the front of the CD. Then, I used to manually go through all the tracks, go to the Artwork tab and then add the back or other CD artwork files. Now I just add the front artwork to all of them together, then click only the first track and add all additional artwork to only track one.
    iTunes also has a little bug where many times after doing a search and it coming up with a list of music, such as "The Beatles", it will take about five seconds before it will let me scroll down the list and sometimes will take about five seconds before it will let me see the mouse pointer on the iTunes window. Anywhere else on either monitor I can see the mouse pointer but as I move it across the iTunes window it disappears until it pops out the other side as I keep moving my mouse.
    I could keep going with this list but this thread is really only supposed to pertain to the first thread's topic so I've probably already said too much. We can't keep meeting up like this anymore or they'll find out.
    Anyway, so that's that...

  • X301 post BIOS / Model Number update System Time problems

    Dear community,
      I recently updated my BIOS using the thinkvantage flash BIOS utility for no reason other than it appeared on the update utility. I also updated the model number, once again for no real reason other than update pleasure. Now, everything works perfectly fine on the system, and I have no problems EXCEPT:
    I use New York Times Adobe Air product called "Times Reader". Since the update, when I try to log into the Times Reader I get an error that states "Authentication Error. Check that your system time is set correctly." In the pre-boot set up screen the time seems to be set right, and in the windows utility the time is set correctly. So my questions is,
     after a BIOS flash / Model # update, does the system time function need some re-boot / update? 
    Thanks! 

    Well I still dunno what the problem was.  It seemed as if the system would have to be running for a day or two before it would start to speed up, as if it was actually gaining a few milliseconds cumulatively every second...
    Anyway, through other testing (OC & such) I flashed to 1.5B5 and it is running pretty good, and seems to have fixed the time problem.
    On a side note, 1.5B5 is the first BIOS that actually makes Cool 'N Quiet work (to underclock to 1GHz at idle & dynamically OC when needed).
    If anyone has experienced this time issue, please post findings!  For now, it's fixed for me, so I'm not going to worry about it  

  • Error message "Update, Live update" missing pieces

    When i turn my computer on, it comes on but I'm getting an error message saying there are missing pieces, reinstall Live Update
    I just installed leopard on my macbook pro last week. I was told that in order to bring it up to the current operating system i need to install leopard then snow leopard then lion and that is what I was trying to do. The computer still comes on but what does this mean and what should I do?
    Mac osx 10.5.8
    Thank you

    HI Mithun ,
    Check if that billing document is there in VFX3 . If it is there then try to clear it from there and then try to reverse it.
    Hopefully it will be done.
    Regards,
    Nikhil

  • Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    @Satterp
    Not sure if you were responding to me or OP - my iPhone is on 5.1.  The OP at the time of writing was on 5.0.1.
    Also, the OP and I had setup our Hotmail as an Exchange server (similar to IMAP), not POP3.

  • HT1414 Hello, I have had to restore my iphone 4 to its factory setting as I had missed a number of updates and my computer was not recognising the device. I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.

    Hello, I have had to restore my iphone 4 to its factory setting as I had missed a number of updates and my computer was not recognising the device. I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.
    Would you know how to resolve this issue?
    Many thanks.
    Nilou

    I have now lost my contacts icon on the iphone and cannot find it even after syncing to my computer.
    Would you know how to resolve this issue?
    It's a pre-installed app and therefore cannot be deleted so you may have inadvertently moved it onto a screen or into a folder, check the utilities folder as this is a common one for it to disappear into.  Check all screens and folders and do a search in Spotlight, it will tell you if the app it still on your iPhone but unfortunately not where it is. If you find it on one or your screens or in a folder, press the icon until it wiggles and then drag it back to where you want it.  Alternatively you can reset your home screen in Settings>General>Reset>Reset Home Screen Layout.

  • Contacts numbers missing after IOS 5 update.

    Contacts missing after IOS 5 update.  I turned off my phone and turned it back on but only my email contacts were there not my numbers.  I updated it on my PC.

    Ok. So after too much of a fight with the iPhone, here is what i think got back the contacts on my phone.
    Step 1: Setting -> Mail, Contacts, Calendars -> iCloud : Switch off everything.
    Step 2: Go back to main setting page.
    Step 3: Make sure you see "Inactive" under iCloud.
    Step 4: Hit the home button
    Step 5: Close iTunes and start it back up.
    Step 6: Unplug your iPhone from the computer and plug it back in.
    Step 4,5,6 is to make sure you are starting a new session.
    Step 7: Sync iTunes.
    Step 8: Check your contacts. They should have come back up
    Step 9: Setting -> Mail, Contacts, Calendars -> iCloud : Switch on everything.
    Choose the option "merge" when you get it.

  • I am missing the look for updates in my general settings. How do I update my iOS?

    I am missing the look for updates window in my general settings on my ipad2. It's on my iphone4 but not my iPad. How do I update my iOS on my iPad?

    Connect your iPad to iTune (computer) and Check for Updates.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg

  • R60 died after run BIOS Thinkpad System Update

    Once I got it booting I did some Windows updates, then did the Thinkpad System Update to update drivers as per what Lenovo was saying needed updating. It included a BIOS update which along with the drivers was done. Now the notebook will not boot. It will turn on, the AC, battery and Power lights come on and thats it, the screen stays black and there is no post.
    What can I do to make this notebook work again?

    Hi Yusufbalash,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with No POST on your ThinkPad R60.
    Have you checked with performing power drain by removing the power adapter and battery from the system, hold the power button for 15 to 20 seconds do this process for 2 to 3 times and connect only power adapter and check.
    If you find the issue still persists, then I suggest you to contacts Lenovo technical support of your region and if the system is under warranty please approach any nearby service center.
    Please click here to contact Lenovo customer support for your region to get the detail of service centers.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • N560GTX-Ti OC freeze during CoD4 MP after update VGA BIOS with Live Update

    hi
    I updated the bios via live update , and i want the stock one back couse cod4 freezes my pc after a few minutes so i cant play
    please help me.   
    (i am sure thats the problem couse i could play the game before i done that update... i thought it will be useful since it was telling me there was an updat, and updates usually great , right? )
    s\n : 602-V238-130B1103125151
    thank You in advance.
    oh and please tell me the exact right way to update it, i dont want to fry my vga card 

    well i reinstalled my x64 win7 after the bios update (full wipe) and the problem remained the same...
    also tried older nvidia drivers too( but i played the game with the newest without any errors) and tried the stable one that was with the vga.  still freezing the game

  • Z87-GD65: Live Update 5.0.112 does not display BIOS 1.8 update

    As the title says Live Update 5.0.112 does not display BIOS 1.8 update for the Z87-GD65. Yet Live Update 5.0.111 does show the BIOS 1.8 update. Why is this so?

    I have to be honest and say I am tearing my hair out trying to update the BIOS on this motherboard. Why is it so convoluted? 
    1. I tried the USB boot with FPT. I can't get the FPT and BIOS files to show when I reboot to the bootable USB stick. Apparently the FPT version is used to also flash the "me extension"? (Whatever the hell that is).
    2. I can't use the Live Update because it is unreliable (as claimed by the forum).
    3. I can't use MFLASH because that doesn't work properly and corrupts the BIOS.
    4. Yet another method is to download the "MSI HQ Forum USB Flasher". Which is in a .RAR file no less!
    Geez MSI you don't make it easy for the average punter. When I had a Gigabyte motherboard it was a simple Windows flash utility and it worked!
    Is there one single easy way to update this BIOS?!   

  • Satellite L875D Missing BIOS version?

    Foreword:
    The current OS I'm running is Gentoo but I have the original Hard drive and OS that came with the laptop (mostly) untouched.
    System Information
        Manufacturer: TOSHIBA
        Product Name: Satellite L875D-S7332B
        Version: PSKFQU-008003B
        Original OS: Windows 8
        Original BIOS version: 6.30
        Current OS: 3.16.3-Gentoo
        Current BIOS version: 6.10 (modded)
     I got this laptop refurbished from the manufacturer around August of last year. The BIOS version as I when I got it was 6.30, a version not listed on the official download page, here). Around August of this year, I decided to make full use of my laptop and install Gentoo, a linux distribution. Granted, I had a couple of problems especially video and the keyboard controller but I got those issues eventually resolved. One issue that alluded me was a firmware bug caused by putting the computer in S3. To resolve this, I decide to flash the bios to a previous version: 6.10. What I did not anticipate was virtualization support being removed by this downgrade. I know for a fact this computer can support VT as I was doing Windows based schoolwork in a VM using KVM (a linux based usage of virtualization extensions made available by the processors) for about 3 months prior to this downgrade. The CPU also shows the svm and svm-lock flags (flags belonging to AMD which indicate the CPU does indeed support virtualization.) The original and modded versions of the 6.10 bios for models C870D/C875D/L870D/L875D both acted the same.
    In my research in trying to fix this problem, I've made note of a few things:
    During the downgrade, the my flashing program warned me that the bios version I was going to flash to (6.10) was bigger than the original contained on the BIOS chip (I can't remember what it exactly said but I remember that it gave a hex value of both versions saying that the new one was something like twice as big.)
    Model L875D machines with BIOS version 6.30 truly exist as evidenced by the following links (As far as I can tell, most if not all these tools take their information from the DMI table aka SMBIOS.):
    [SEMI-SOLVED]RTL8188CE Wireless card is not working right       Related information is the third post. (taken from the output of inxi, a system information viewer in linux.)
    [Toshiba Satellite L875D-S7111] Monitor does not come back after suspend. Related information is in the first post.
    (Alternately here as in the bugreport listed as file "BootDmesg".)
    Sims 3 Won't Start, Graphics Issues, Windows 8 related? Related information is at the top of the page(DXDIAG)
    WoW Freezing Related information is in third post (DXDIAG)
    Toshiba forums: "cant update my BIOS 6.70" Interesting dialog between people on this forum and user..
    A different model (C870D/C875D, models which are also on the BIOS download page of the L875D and presumably from the same "family") has the VT extensions enabled by default:
    ACPI Flash BIOS version 6.30 for Satellite C870D/C875D (PSCA2*/PSCBE*)
    (I've modded the 6.10 version's tabs to show and allow changing of the VT setting: changing the value does absolutely nothing and my system still reports the bios as having it disabled.)
    As a summary, here is what I've collected about this "missing" bios:
    Has a version of 6.30
    Built on or released 12/06/2012 (Presumably MM/DD/YY as I believe this laptop is a US version)
    Does not exist seem to exist on any public Toshiba support page
    Working Support of virtualization is possible.
    Possibly a half the size of the 6.10 bios version.
    Still has firmware bug present in 6.10 (an example of this firmware bug can be given upon request.
    Access to any of my logs is available on request (Windows or Linux).
    Final thoughts:
    I'm assuming the missing bios is either something installed by a refurbishing department or it is official and was just never posted to the main support page. In any case, I'd like to get my VM back up and running as I'm somewhat dependent on it to do my course work as most of my notes and books are on the gentoo drive.

    I have been finding the fan annoying too on this model.(a500-1gl psar9e)
    When i am gaming it will kick in after a little to a speed of 90% according to the health monitor. It will shh again after a period of time but will start up again. This behavior seems to happen more frequently now. When i first got the notebook (feb 2010) the fan hardly ever kicked in fast even with prolonged playing.
    Oddly enough if the fan kicks in and i bring my browser window over the gaming window the fan seems to slow down again. Could be a strange coincidence?
    Anyway i contacted toshiba and they have told me to upgrade my bios and my display drivers. Been also suffering the driver failure problems that is know for this notebook. I plan to do this on monday and hope it fixes the issues. so will try and update you to that outcome.
    Its frustrating to have this one annoying issue ruin a good notebook.

Maybe you are looking for