Missing Data in the KE5Z report

Hi Guru,
We are using ECC5. I have executed transaction code KE5Z to derive the actual line item for the profit centre. However, the
system read heap of transaction and displayed only for one profit centre data. I have also checked whether there is a restriction in my selection for the profit centre of the report but there is none. Further, I have looked at the table GLPCA (EC-PCA Actual Line Items) and found heap of transactions being dispaly for all profit centre. I also run a authorization check to ensure it is not the case and found that the user authorization check is successful.
I'm not sure what went wrong with this report.
Your kind assistance herein is greatly appreciated.
Thank you.
Regards
Nathan

Hi,
I have checked the Authorization issue previously. However, not one user is affect but everyone in finance team has the similiar issue. Moreover, in test client it is working fine. Hence, I did user access comparison across client to ensure there is no change in the authorization. The result show same value. Looks like I have rule out the Authorization issue at this time.
I really appreciate your input and assigned point for helpful tips.
Thank you.
Regards
Nathan

Similar Messages

After changing a subreport I loose data in the main report.

Hi All,
I have a main report that has two parameter fields and two subreports linked to the parameter fields. The two subreports access the database and work fine separately. When I add the two subreports to the main report it works fine. As soon as I make a change to a subreport it works fine standalone. But as soon as I update the main report (reimport subreport) the subreport no longer returns data to the main report. To get the report to work after a change to a subreport I have to delete the subreport from main and then add it back in again.
Does anyone have any suggestions?
I am using Crystal Reports 10 and I'm totally at my wits end. I've been working with Crystal for about 5 years and this is the first time I've seen this. Maybe I'm missing something small but I just can't seem to find the answer.
Thanks for any help,
Jim

Jim:
I usually edit my subreports from within the main report. I right click the subreport and then click edit subreport. This eliminates the need to reimport the subreport. I've done a lot of work with subreports and this always works for me.
I hope this is not too late and helps you out.
Ralph

LIS - To get the data for the missing data for the infostructure S906

Hi
We have performed an unicode conversion In our SAP ECC 6.0 system, after the conversion, the infostructure S906 (copy of S006) was not updated for the period 22nd June to 25th June 09.
Then we regenerated the infostructure S906 using the tcode MCS/ on 26th June and after which the update rules are working correctly in S906.
Now when we run the SOP report for this week, the data is missing for the period 22nd June to 25th June 09.
We have gone thru the note 64636 - to setup the infostructure from the begining, which needs more downtime.
Is there a possibility to get the missing data for the above period only, instead of setting up the infostructure from the beginning.
Thanks & Regards
Senthil

You did not tell us what kind of update are you using. Some transactions (e.g. OLI1) allow to run it by posting date; others (e.g. OLI9) for a range of the documents. You can find what document numbers were created in the period of question and then run it for them. Although I would recommend the full rebuild.

Deleted a free version of PDF Max after purchasing the pro version. That resulted in missing data on the pro version too. Please help

Last week, I purchased the pro version of PDF Max and today deleted the free version since I am not using it anymore.
I don't what happened or how, this also resulted in missing data on the pro version. I created loads of annotations and notes using the pro version. Now, all that's missing. I am using the word "missing" because I think the data (notes and annotations) is still there but its just not showing up in the app. Since, the size of the app did not change. It still is 1.24gb on iTunes. Can you guys please help me recover or should I say figure out a way to display the files on the app? Pretty please!

I'm not familiar with the specific app, but generally speaking if the free and paid versions of an app are separate (i.e. not an in app purchase), what you are seeing will be the case. the only resolution I know of is if the vendor provides an account and stores the data online, or it integrates with something like DropBox. If not, once the old version is deleted, the data is pretty much gone.

Only the Admin can view the data in the Discoverer Reports

Hello,
Discoverer Version Info:
OracleBI Discoverer 10g (10.1.2.3)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
Discoverer Model - 10.1.2.55.26
Discoverer Server - 10.1.2.55.26
End User Layer - 5.1.1.0.0.0
End User Layer Library - 10.1.2.55.26
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Everything was working fine until we applied some database patches.
Users cannot see any data in the discoverer reports. Only the Admin can see data. Even the LOVs do not populate any values for the regular users.
Can someone please advise as to what is happening?
Thanks.
Thanks.

Hi Akshaj,
It would certainly be hard for me to replicate (I am on 10g), but perhaps you could identify the patches that were applied and this would help people discern the problem.
I would narrow down this problem to one business area. Next, identify what users or responsibilities have been granted access using the Discoverer admin tool. Has anything changed?
Confirm which users have been granted access. Has this changed because of the patch?
I would look at the session sql to see if there is some change after the patch (something like this):
select
from
v$sql
where
parsing_schema_name = 'APPS'
and module in ('Disco10, DISCOADMIN:Discoverer_login_responsibility','dis51ws@apps_server_url (TNS V1-V3)')
order by first_load_time desc;
Hopefully you have a test or development environment which has not received this patch and you can juxtapose the authentication behavior.
Patrick
Edited by: Patrick Bacon on Oct 3, 2011 12:55 PM

Time delay on seeing the changed data onto the webi reports

Hello,
I'm new to BOBJ and was hoping someone can help me with adjusting the time delay the reflects the changed data to the Webi reports.
I have a user that would update a form on our EP. Afterward, she would have to wait a while before she can see the changed data on our Webi reports.
can you please tell me the default time lag and show me where I can change it if required?
thanks.

Thanks for the reply.
Our BO is 3.1 SP4.
We just implemented PBF (Public Budget Formulation) and our forms are running on NWCE server. It's being written to our backend BW 7.01 SP8 server. I was told by our users that after she updates some new information on the form, it takes a while before she can see it on the reports. My understanding was the universe should see the updated data from our BW immediately after they refresh. Just as you both mentioned. But according to the users, its not. there's a time delay.
I'm going to test this myself if there's a delay. In the meantime and suggestion would be helpful.

Displaying HTML data in the xml report

hi
can anybody help me out on how to display the HTML data in XML report, for example the data in the table is in the following format with HTML tags attached to it
*<b>Test Good display as normal text<b>*
+<i>Test Italicized <i>+
i would like to display the above data in the XML report as a following with "Test Good display as normal text" as BOLD and "Test Italicized" as Italicized
Test Good display as normal text Test Italicized
if anybody came across similar issue please help me out.
Regards
Hemi.

Hi..
Check out this link..hope this helps..
http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html

Miss data label when desktopintelligence report saved as excel

BO version is XIR2 Sp2.
create a column chart with 2 measures in deski.
show data labels for these 2 columns, it is ok in deski.
but when save the report as excel format, found data label only shown on first column, and miss the label for another column.
Is it a bug in bo?
please advise, thanks

Hi Zhang,
The issue you are getting is fixed in SP3 similar issues were reported as bug previously.
Following are the details could you please test the issue on SP3 under test environment.
ADAPT00785260 Value of labels on line chart doesn't show when report is saved in excel and chart contains an additional group.
ADAPT00864551 - Axis Label is missing when you do save as xls for the Deski Reports with charts.
Regards,
Sarbhjeet Kaur

Not having to refresh the data in the main report but only in the subreport

Hi SAP,
I have a report that uses a stored procedure in the main report and uses regular database tables in the subreport. The data returned from the stored procedure reports information from the month-end database (a cutoff point from the previous month's numbers) while the subreport reports information from the live database. This report gets run everyday to show the changes in numbers from the live database. Obviously the numbers from the month-end database remainds static until the next month's cutoff database is created.
My problem is that everyday when I run the report, the data needs to refresh from both the stored procedure in the main report and the live database tables in the subreport. How can I leave the data returned from the stored procedure static or as is without refreshing the stored procedure returned data and just have the subreport data refresh itself? The stored procedure really puts a strain on the database and I would like to cut-out the time to process the report as well. Does anyone have any ideas?
Zack

Hi Zack,
Try the following under Report options.
1. Clear the check box of "Verify Stored Procedures on First Refresh" in the Main report.
2. Select the check box of "Verify on First Refresh" in the sub report.
Hope this helps.

How to create a report with data using the Crystal Reports for Java SDK

Hi,
How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats. I can create my own report through the following code snippet:
ReportClientDocument boReportClientDocument = new ReportClientDocument();
boReportClientDocument.newDocument();
However, I cannot find a way to add data elements to the report without specifying an RPT file. Is this possible? I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
is there a way to do this through these packages?
com.crystaldecisions.sdk.occa.report.data
com.crystaldecisions.sdk.occa.report.definition
Am I forced to create a RPT file for the different table and column structures I have?
Thank you in advance for any insights.
Ted Jenney

Hi Rameez,
After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser. I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
<%
try {
            ReportClientDocument rcd = new ReportClientDocument();
            rcd.newDocument();
// Setup the DB connection
            String database_dll = "Sqlsrv32.dll";
            String db = "qa_start_2012";
            String dsn = "SQL Server";
            String userName = "sa";
            String pwd = "sa";
            // Create the DB connection
            ConnectionInfo oConnectionInfo = new ConnectionInfo();
            PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
            // Set new table logon properties
            PropertyBag oPropertyBag2 = new PropertyBag();
            oPropertyBag2.put("DSN", dsn);
            oPropertyBag2.put("Data Source", db);
            // Set the connection info objects members
            // 1. Pass the Logon Properties to the main PropertyBag
            // 2. Set the Server Description to the new **System DSN**
            oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
            oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
            oPropertyBag1.put("Database DLL", database_dll);
            oConnectionInfo.setAttributes(oPropertyBag1);
            oConnectionInfo.setUserName(userName);
            oConnectionInfo.setPassword(pwd);
            // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
            oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
// Add a Database table
          String tableName = "Building";
            Table oTable = new Table();
            oTable.setName(tableName);
            oTable.setConnectionInfo(oConnectionInfo);
            rcd.getDatabaseController().addTable(oTable, null);
    catch(ReportSDKException RsdkEx) {
            out.println(RsdkEx);
    catch (Exception ex) {
          out.println(ex);
%>
Throws the exception
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
          String tableName = "Building";
            String fieldname = "Building_Name";
            Table oTable = new Table();
            oTable.setName(tableName);
            oTable.setAlias(tableName);
            oTable.setQualifiedName(tableName);
            oTable.setDescription(tableName) ;
            Fields fields = new Fields();
            DBField field = new DBField();
            field.setDescription(fieldname);
            field.setHeadingText(fieldname);
            field.setName(fieldname);
            field.setType(FieldValueType.stringField);
            field.setLength(40);
            fields.add(field);
            oTable.setDataFields(fields);
            oTable.setConnectionInfo(oConnectionInfo);
            rcd.getDatabaseController().addTable(oTable, null);
This code succeeds, but it is not clear how to add that database field to a section. If I attempt to call the following:
FieldObject oFieldObject = new FieldObject();
            oFieldObject.setDataSourceName(field.getFormulaForm());
            oFieldObject.setFieldValueType(field.getType());
            // Now add it to the section
            oFieldObject.setLeft(3120);
            oFieldObject.setTop(120);
            oFieldObject.setWidth(1911);
            oFieldObject.setHeight(226);
            rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
Then I get an error (which is not unexpected)
com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
How do I add one of the table.SetDataFields() to my report to be displayed?
Are there any other pointers or suggestions you may have?
Thank you

Missing data in weekly EWA report

Hello SDN,
I have run weekly EWA reports for our productive ECC5 system through SolMan 3.1 for some time, but recently I've noticed that some information is missing from the report.
Section 11.2 (Response Times) includes a graph showing the Top 5 transactions. The transactions are listed as Transaction 1, 2, 3, 4 and 5 on the graph and there used to be a table below the graph that showed that (e.g.) Transcation 1 was MMBE, Transaction 2 was LT27, etc..
For some reason, that table no longer appears and the graph is of no little use on its own, because I have no idea what transactions it refers to.
Has anyone else experienced this problem?
Thanks,
Arwel Owen.

Hi Ragu,
The strange thing is that this table used to be displayed up until around 6 weeks ago, when it just disappeared off the EWA report. Nothing was changed (knowingly) to cause this. Also, the graph that the table refers to is still included in the report, it's just the table that's disappeared. If anything had been changed, I would have expected both graph and table to change.
Thanks for your help.
Arwel.

No data in the STD Report S_ALR_87012272

Hi,
The SAP STD report is s_alr_87012272 is not showing any values.
Kindly help me how we can get the values in the report.
Report long text: Cash Flow (Indirect Method) Variant 1
Report name                      0SAPRATIO-03
Thanks..,,
Regards,
John Pal

Dear John,
All reports are based on a financial statement version. This is
determined in the form with the same name under the general selections
(see overview of the report parameters). In the standard system, this is
the INT version. In the version, accounts with chart of accounts (INT)
and number are assigned to the individual items. If the system in
question uses another financial statement version or another chart of
accounts, the selected data cannot be assigned to the balance sheet
items.
This is the reason we suggest our customers to create their own form.
Check SAP note 43661 which describes creation of new
forms and reports.
Following are the steps to create the form and report:
FSI4 => Form type: Financial Statement Key Figures => Copy
             Form: Name and Text for the new form
        Copy from: 0SAPRATIO-04
FSI5 => find and double click the new form just created => Edit Gen.
data selection => change the FSV to what you want to use
FSI1 => Report type: Financial Statement Key Figures => Create
             Report: Name and Text for the new report
          With form: Name of the new form
details please refer to standard SAP report 0SAPRATIO-04
FSI3 => find and excute the new report to check if you can get the
result you want
To change the fin.statement version in the general data selections of
your new form is not enough.
All reports are based on a financial statement version. This is
determined in the form with the same name under the general selections
(see overview of the report parameters). In the standard system, this is
the INT version. In the version, accounts with chart of accounts (INT)
and number are assigned to the individual items. If the system in
question uses another financial statement version or another chart of
accounts, the selected data cannot be assigned to the balance sheet
items.
This is the reason we suggest our customers to create their own form.
Please find the attached note 43661 which describes creation of new
forms and reports.
Following are the steps to create the form and report:
FSI4 => Form type: Financial Statement Key Figures => Copy
             Form: Name and Text for the new form
        Copy from: 0SAPRATIO-04
FSI5 => find and double click the new form just created => Edit Gen.
data selection => change the FSV to what you want to use
FSI1 => Report type: Financial Statement Key Figures => Create
             Report: Name and Text for the new report
          With form: Name of the new form
details please refer to standard SAP report 0SAPRATIO-04
FSI3 => find and excute the new report to check if you can get the
result you want
To change the fin.statement version in the general data selections of
your new form is not enough.
Mauri

How to get correct opening blance data for the quarterly report in BOFC?

Hi all,
I have a problem with getting the opening balance for the quarterly report.
i would like to keep the beggining balance data for the end of previouse year. (eg: now is 2010, then keep the begginig balance at Dec.2009 for each quarterly reporrt through the year in 2009).
however, for example in the second quarter, if i choose the beggining balance of Dec.2009 in the Consolidation definition, there is a problem that consolidation FS does not include the manual journal entry that ive entered at the first quarter such as goodwill.
Do I need to make manual journal entry at all the quarterly reporting period if I want to set the beggining balance for the previouse year end?
Could somebody please tell me how to remediate to this issue?
Or how do you manage with the opening balance in BOFC?
Thanks & Regards,
Hitomi

Hi Michael,
HRMS appliocation
database 10.2.0.4
windows XP
ebs 11.5.10.2
One of our user using disooverer 4i desktop and administration edition on old windows 2000 machine and connecting to schema.
We are decommision old windows 2000 machine.
I have installed disooverer 4i desktop and administration edition on new windows XP VM box and trying to connect to same schema which was used with old
desktop and asking me to create EUL. What is theat I should be doing to use new one same as old one?
Old box is still there.
Thanks.

Last data-load date in the WebI report

Hey,
I have made a WebI report on the InfoCube. Now the client is interested in seeing the date on which the data was latest loaded in the InfoCube. If someone can help with the scenario.
Thanks.

Hi,
Take the max of record load date in the report and show it.
Let me know if this did not work.
Cheers,
Ravichandra K

My calendar on my iPhone 5c is missing dates. The date is there in the calendar but not on my list. It will not let me schedule anything on May 6! I saw a few other random dates like that. Any advice?

My calendar on my iPhone 5c is missing dates and won't let me schedule for this dates. Any advice?

iCloud, Google, native calendar, some other calendar?
Does the date appear when accessing the web interface for that calendar?
What if any errors are occurring?

Missing Data in the KE5Z report

Similar Messages

Maybe you are looking for