Miss data label when desktopintelligence report saved as excel

BO version is XIR2 Sp2.
create a column chart with 2 measures in deski.
show data labels for these 2 columns, it is ok in deski.
but when save the report as excel format, found data label only shown on first column, and miss the label for another column.
Is it a bug in bo?
please advise, thanks

Hi Zhang,
The issue you are getting is fixed in SP3 similar issues were reported as bug previously.
Following are the details could you please test the issue on SP3 under test environment.
ADAPT00785260 Value of labels on line chart doesn't show when report is saved in excel and chart contains an additional group.
ADAPT00864551 - Axis Label is missing when you do save as xls for the Deski Reports with charts.
Regards,
Sarbhjeet Kaur

Similar Messages

Excel exports/scheduled reports missing data labels

Hi All,
New to the forum so apologies if this has already been posted/answered.
When saving Webi reports to Excel or reviewing scheduled reports in Excel myself and other recipients are noticing corrupted bar chart graphics whereby the only data labels visible is the first on the left only....all of that data is there in the hidden sheets yet not being displayed
My own IT dept have been banging on about IE versions but this makes no sense as recipeints of the scheduled reports are also seeing the same problem and they're obviously not viewing/saving anything via a browser session.
Does anyone have any clues as to what might be causing this...have reviewed all of the Excel 2007 options but nothing jumps out at me.
Many thanks in advance
SimonMc

Hello,
It uses custom views:
SELECT MONTHS_BETWEEN (LAST_DAY (TRUNC (SYSDATE)), O278343.ACTUAL),
O278047.ORGANISATION,
O278047.JOB,
O278047.GRADE,
O278047.LOCATION,
O278047.CAR_ENTITLEMENT,
O278047.PENSION,
O278047.ASSIGNMENT_CATEGORY,
O278047.SUPERVISOR,
O278047.NORMAL_HOURS,
O278160.FIRST_NAME,
O278160.LAST_NAME,
O278160.GENDER,
O278160.DATE_OF_BIRTH,
O278160.ETHNIC_ORIGIN,
O278160.EMPLOYEE_NUMBER,
O278160.HIRE_DATE,
O278160.ORIGINAL_HIRE_DATE,
O278315.SALARY,
O278315.PERCENTAGE_INCREMENT,
O278315.SALARY_FROM,
O278315.REASON_FOR_CHANGE,
O278343.LEAVING_REASON,
O278343.ACTUAL,
O278481.PERSON_TYPE,
O279218.COST_CODE,
O288690.POST_CODE,
O278343.ADDITIONAL_LEAVING_REASON
FROM APPS.XX_ASSIGN O278047,
APPS.XX_PERSON O278160,
APPS.XX_SALARY O278315,
APPS.XX_SERVICE O278343,
APPS.XX_PERSONTYPE O278481,
APPS.XX_COSTING O279218,
APPS.XX_ADDRESS O288690
WHERE ( (O278160.PERSON_ID = O278047.PERSON_ID)
AND (O278160.PERSON_ID = O278343.PERSON_ID)
AND (O278047.ASSIGNMENT_ID = O278315.ASSIGNMENT_ID(+))
AND (O278160.PERSON_ID = O278481.TYPE_PERSON_ID)
AND (O278047.ASSIGNMENT_ID = O279218.ASSIGNMENT_ID)
AND (O278160.PERSON_ID = O288690.PERSON_ID))
AND (TRUNC (SYSDATE) BETWEEN O278481.PT_EFFECTIVE_START
AND O278481.PT_EFFECTIVE_END)
AND (O278343.ACTUAL BETWEEN O279218.EFFECTIVE_FROM
AND O279218.EFFECTIVE_TO)
AND (O278343.ACTUAL BETWEEN O278047.ASSIGN_START_DATE
AND O278047.ASSIGN_END_DATE)
AND (O278343.ACTUAL IS NOT NULL)
AND ( (MONTHS_BETWEEN (LAST_DAY (TRUNC (SYSDATE)), O278343.ACTUAL)) <=
18)
AND (O278481.PERSON_TYPE = 'Ex-employee')
AND (NVL (TO_DATE (O288690.ADDRESS_DATE_TO),
TO_DATE ('31-DEC-4712', 'DD-MON-YYYY')) > TRUNC (SYSDATE))
AND (O278315.SALARY_FROM(+) <= TRUNC (SYSDATE))
AND (NVL (TO_DATE (O278315.SALARY_TO(+)),
TO_DATE ('31-DEC-4712', 'DD-MON-YYYY')) > TRUNC (SYSDATE))
AND (TRUNC (SYSDATE) BETWEEN O278160.EFFECTIVE_DATE_FROM
AND O278160.EFFECTIVE_DATE_TO)
AND (TRUNC (SYSDATE) >= O288690.ADDRESS_DATE_FROM);
Thanks
Sarah

Custom data labels in Crystal Reports charts

Hi,
I have a problem with charts in Crystal Reports. The notation prescribe e.g. that positive values appears a plus (+21) and negative values a minus (-21).
The problem is, that I canu2019t assign custom values to the data labels (e.g. the value is 20 but I want to show +20 or 18 or something else).
Furthermore, its a problem that I can't scaling depending on a formula field. This is required that all charts in the report have the same scale and are dynamically depending on the values in the report.
I need a solution to both problems, or a workaround.
Thanks in advance
Kevin

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Different data returned when running report

I have a report showing the diagnostic codes of all our patients. Missing some codes in the report that are stored in the database. Update one patient and get that record to show up, 2-3 other codes for other patients go missing. Very weird.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly

Why I get "Error in getting session data" error when running report?

Hello,
I have reporting services on one server, and SharePoint 2010 on other server. When I view report from browser, I got blank page. From Report Server Log file, I got below error:
v VERBOSE: writting session cookie: ekkrjbubp00t5wzc3rzspvzb
v VERBOSE: Saved report snapshot to session in a background thread <for same session id>
e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.;
e ERROR: Error in getting session data: Expired Session: ekkrjbubp00t5wzc3rzspvzb
e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: , Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: The report execution ekkrjbubp00t5wzc3rzspvzb has expired or cannot be found
Are there anyone getting the same issue as mine? I did not see any solutions for this issue when I searched.
Thanks,
Megan

There are a number of timeouts in SSRS; session timeout, report execution timeouts, http request timeouts. A session timeout in SSRS is not the same as a session timeout in ASP.NET. Below are some articles that can help you understand the timeouts
and hopefully lead you down the path of discovery.
This articles is a good article as it discusses the session timeout and the keep alive that is sent from the report viewer.
http://blogs.msdn.com/b/jgalla/archive/2006/10/11/session-timeout-during-execution.aspx
This article is good as well in describing some of the timeouts.
http://blogs.msdn.com/b/dynamicsaxbi/archive/2013/02/14/how-to-addressing-ssrs-session-timeouts.aspx

Missing data in weekly EWA report

Hello SDN,
I have run weekly EWA reports for our productive ECC5 system through SolMan 3.1 for some time, but recently I've noticed that some information is missing from the report.
Section 11.2 (Response Times) includes a graph showing the Top 5 transactions. The transactions are listed as Transaction 1, 2, 3, 4 and 5 on the graph and there used to be a table below the graph that showed that (e.g.) Transcation 1 was MMBE, Transaction 2 was LT27, etc..
For some reason, that table no longer appears and the graph is of no little use on its own, because I have no idea what transactions it refers to.
Has anyone else experienced this problem?
Thanks,
Arwel Owen.

Hi Ragu,
The strange thing is that this table used to be displayed up until around 6 weeks ago, when it just disappeared off the EWA report. Nothing was changed (knowingly) to cause this. Also, the graph that the table refers to is still included in the report, it's just the table that's disappeared. If anything had been changed, I would have expected both graph and table to change.
Thanks for your help.
Arwel.

EPM Architect - Missing Data Source when deploy

Hi,
I have an application on EPM which status is at the moment Not Deployed. It once worked but now when I try to deploy it's Data Source is missing, nor i can associate one to it. How can I recover this situation? The application was working until yesterday and the Data Source for the underlying application is present.
The Diagnostic does not show me the option to find suitable datasource for this application.
The Planning application works correctly, I tried to restart Planning and EPMA Services but without success.
Is there something I can do working on the tables in the EPMA schema?
Thank you,
bidi

Hi Celvin,
no I didn't play with the underlying tables. I ran the Diagnostic and it fails two tests:
- Not deployed but in Shared Services
     - a) Delete from EPMA only
     - b) Manually delete application from Shared Services
- Not Deployed status in EPMA, but in product
     - a) Delete from EPMA only. May run the Transform Classic to EPM Architect Wizard manually aftwrwards
     - b) Manually delete the application from the productnd
I think that Delete from EPMA and reverse from the underlying planning application would in a certain sense "fix" my issue, but I'm not so confident in this operation, I don't want for some reason override something on the Planning application.
In the forum I found that when the Data Source is set to NONE the diagnostic is able to recognize a data source that could fit. I don't know if in that case NONE is "NONE" as a string or is just missing, in my case I see an empty drop down list.
Thanks

Missing Data in the KE5Z report

Hi Guru,
We are using ECC5. I have executed transaction code KE5Z to derive the actual line item for the profit centre. However, the
system read heap of transaction and displayed only for one profit centre data. I have also checked whether there is a restriction in my selection for the profit centre of the report but there is none. Further, I have looked at the table GLPCA (EC-PCA Actual Line Items) and found heap of transactions being dispaly for all profit centre. I also run a authorization check to ensure it is not the case and found that the user authorization check is successful.
I'm not sure what went wrong with this report.
Your kind assistance herein is greatly appreciated.
Thank you.
Regards
Nathan

Hi,
I have checked the Authorization issue previously. However, not one user is affect but everyone in finance team has the similiar issue. Moreover, in test client it is working fine. Hence, I did user access comparison across client to ensure there is no change in the authorization. The result show same value. Looks like I have rule out the Authorization issue at this time.
I really appreciate your input and assigned point for helpful tips.
Thank you.
Regards
Nathan

Missing date tag when ripping with Creative MediaSourc

How come Creative MediaSource fails to retrieve the date from Gracenote? I need to go online find the date and then update the tags manually. Is this just a limitation or some bug on my particular system?
Thanks,
ZP

See item 20.
http://www.grainge.org/pages/authoring/rh8/using_rh8.htm
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Interactive Report with html tags --- Data saved in Excel with html tags

Hello,
I am using APEX 4.0. I have an interactive report that displays some of the columns bold and / or colors using html tags. As an example,
SELECT
''''' || SERIAL_NUMBER || '''' SERIAL_NUMBER,'||chr(10)||
'PRODUCT_NAME,'||chr(10)||
''''' || PRODUCT_DESC || '''' DESC,'||chr(10)||
'QUANTITY,'||chr(10)||
FROM
<Table name>
At runtime, the Interactive Report displays the fonts, colors correctly; however, when I save the data of the Interactive Report in an Excel format, it saves the Html tags along in the EXCEL spreadsheet. For example, the column serial number from the above SELECT statement is extracted in an Excel column as ---
123456789
Is there another way to render the column data so that extracted data will not display the HTML tags or is removing the html font color tags from the SELECT statement the only option?
Thanks in advance.
Ed

Hello,
I have a feeling all your problems are related take a look at this thread. I found it in 10 seconds of searching the forum.
strange tags
It's always best to do a quick search first most likely you are not the first person to have this problem.
Carl

My macbook pro does not remember the dates of when I saved files

I have had my macbook pro since late may of 2010, but I recently noticed it has not been remembering the day I saved files. It claims that every file was saved, or last opened on 5/1/2010. How can I make it so my computer remembers the dates of when everything was saved?

Is the clock showing the correct time. Check in System preferences > Date & Time to see how you have this set up. It may be that you are connecting (or trying to connect) to an online time server that is not right. Do you have to reset the time? Also, are you having any problems with the battery? I am not sure if this MacBook Pro has a separate battery for the clock, but if that were defective that may cause symptoms like this.

Grouping to display null values for all the missing dates

Hi SAP,
I am trying to display '0.00' value for all the missing dates in my crystal reports as follows:
17-Jan-14     40.00
18-Jan-14       0.00
19-Jan-14       0.00
20-Jan-14     80.00
However, my crystal report is showing as follows:
17-Jan-14     40.00
18-Jan-14       0.00
19-Jan-14
20-Jan-14     80.00
The missing dates with no data are group together and my '0.00' value is not. Kindly advise me the solution. The formula is shown as per attached.
Thank you.
Regards.

Hi,
Thanks for your reply.
Fyi, I am using a formula field in crystal report to display "0.00" for days in between as follows:
whileprintingrecords;
if Days_Between({Command.DocDate},next({Command.DocDate}),'dd-MMM-yy') = "" then "" else "0.00"
There is another formula field in crystal report to display the missing dates in between as follows:
whileprintingrecords;
Days_Between({Command.DocDate},next({Command.DocDate}),'dd-MMM-yy')
Below is my report custom functions:
Function Days_Between (datefield as datetime, nextdatefield as datetime, format as string)
' This function is only used to display what data is missing within a specified date range...output type is text
dim thisdate as date
dim nextdate as date
dim output as string 'output is the text display
dim daysbetween as number
dim looptimes as number
looptimes = 0
daysbetween = 0
output = ""
thisdate = datevalue(datefield) + 1
nextdate = datevalue(nextdatefield)
if nextdate - thisdate > 1 then daysbetween = nextdate - thisdate else daysbetween = 1
do
if nextdate - thisdate > 1 _
then output = output + totext(thisdate, format) + chr(10) _
else _
if nextdate - thisdate > 0 _
then output = output + totext(thisdate, format)
looptimes = looptimes + 1
thisdate = thisdate + 1
loop until looptimes = daysbetween
    Days_Between = output
End Function
The issue arise when when there is more than one missing dates in between but the null values ("0.00") displayed is only for the first missing dates and not for all the missing dates.
Regards,
Ting Wei

BarLine Combo graph data labels

Hi All,
In a bar-line combo graph, i want to show the data labels of the bar always and show the line data labels when i rollover it. how can i implement it?
I changed the 'show data labels' to 'always' in general chart properties which is making all the labels to show instead i just want bar data to be shown always.
Thanks

You might have to build a custom chart type (by copying the original) and modify the system properties to acheive it ... but really I'm not sure if you'll get that level of control.

Access Report exporting to Excel Horizontally

I've got a rather large report in Access, based on a couple of forms.
When i preview it looks fine, Textboxes are all in order with the make and model then the data in text boxes in a column below.
There are 7 columns of text boxes like this.
When I export to a PDF, it's in the right format, 7 columns next to each other.
When I export to Word and even a text file it works fine.
When I export to Excel, they all go horizontal...textbox name in row 1 and all the data in row 2, clear to column IV and that's it.
What am I doing wrong?
Thank you for any help.
Gee

Hi Gee,
According to the desription, when the report exported to Excel, the layout is incorrect.
Based on my test, the Access doesn't export the textbox into Excel, it just export the data in the report. Here are the test steps for your reference:
1. Create a table with some fields in Access 2013
2. Create a reprot based on the table by default
3. Export the report to Excel by External data->Export->Excel
Did I misunderstood? Also a demo database to help us reproduce this issue is much appreciate.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SSRS 2008 R2 - Missing Data when Exporting to Excel or CSV (Row Count is 500)

Hey Folks,
When exporting SSRS 2008 R2 report to an csv or excel file not all the rows are being exported. Any suggestions on why this is occurring. The number of rows is less then 500 and it seems to be a pretty straight forward export. Any help is
greatly appreciated. Inherited this and not sure if this would be configuration issues or something else. It is happening on a number of reports.
Thanks.

Hi Humbly,
According to your description, when you export report into CSV or Excel format, some rows are missing.
In your scenario, since you are missing data “rows” in your exported file, we are guessing if you have any visibility setting like toggle which hide those records. It’s possible that you have set toggle or visibility in your report. After exporting
Excel/CSV, some data might not appear properly. In SSRS 2008 R2, it has reported this kind of issue about data missing after exporting. However, those scenarios are not exactly same as your issue. It mostly turns out be conflict between data and “layout render”
and related to DataElementOutput property. DataElementOutput property controls export behavior, it indicates which report item data should appear in Excel/CSV render. For more information, please refer to this article: Reporting Services:
Why aren’t all my report columns exporting to CSV and/or XML?.
As we tested in our environment(SSRS 2008 R2), no matter what we export into CSV or Excel, we get same results as in BIDS . So I would like to know your report design structure. If possible, please provide some screenshots about results in BIDS and Excel/CSV
render extension results. It may help us find out the root cause of your issue. Thank you.
Best regards,
Qiuyun Yu

Miss data label when desktopintelligence report saved as excel

Similar Messages

Maybe you are looking for