Missing .dll? (nilvaiu.dll) ...when building an installer in 2009.

Ok, what we have here is a bit of fumbling in the dark... I haven't built a executable/installer since I was working with LV8.6, so please bear with me here... before anyone ask, yes I did search!
Here's my process at this point...
I have a VI that is working as desired. I wish to make this a standalone executable that I can run on another computer to manage some controls.
I have the 2009 LV runtime engine installed on said computer.
I then open my VI, again verify that it is working as desired, and add a new Project.
This VI is added to the project.
I now have the project explorer open, and select Build Specifications and select New/Application(EXE)
On the following tabs I take the following actions...
Information... No action taken
Source Files... I select the VI and add it to the Startup VIs list
Destinations... No action taken
Source File Settings... No action taken
...and basically leave all the rest at their defaults.
Hit Build and it builds "My application", which is added below the Build Specifications file.
I took that folder with the exe file included and tried to run it on my target computer and it comes up missing the afore mentioned nilvaiu.dll
Now, am I making this too simple? Missing some steps? I also went down the path of making a installer and get the same missing dll when I run it.
I'm more than willing to read and learn, but I'm either just not searcing for the correct terms or in the right places. A point in the right direction would be much appreciated guys!
Thanks,
Chad
Solved!
Go to Solution.

Hi ogk.nz,
Have you included all three DAQmx installers and checked both boxes at the bottom of the window as shown in amezam's post when you built your installer? There may also be a compatibility issue, as DAQmx 9.9 is not supported on LabVIEW 2009. Try reverting to DAQmx 9.7 or upgrading to LabVIEW 2010 as per this compatibility chart:
http://digital.ni.com/public.nsf/allkb/B0D5630C0A50D5C6862578E800459248
Regards,
David R
Applications Engineer
National Instruments

Similar Messages

Error -30, when building new installer

LabVIEW 2010 sp1, just upgraded and lost the ability to build installer. Error dialog:
LabVIEW 2010 sp1
Win 7 64bit
Thanks in advance.

For example, which version of LabVIEW did you upgrade from? Did you modify any of your code? Are you having problems building ANY installers or just a single application?
Original installed version: NI Developer Suite 2010 DS2
Code is unmodified
Application Builder Error occurs from any project.
Currently configured installers cannot be built either. When build configuration is viewed the additional installers section is empty.
I am currently working with an NI Applications Engineer to resolve the issue.
So far, article:
http://digital.ni.com/public.nsf/allkb/1B53A6FDFC20B8058625752400687F42?OpenDocument
has been suggested.
From my team of 6 the 3 that have upgraded have the same issue.
I will update the status once I try this fix.

Popup for resoure location when build for installer

When I build the installer, it popup the request for LV8.2.1 install location.
I put LV8.2.0 CD and the driver CDs in, all cannot work.
Any suggestion?
Solved!
Go to Solution.
Attachments:
Popup.JPG ‏18 KB
Additional Installer.JPG ‏83 KB

Hi Turbot,
I tried a little bit of searching through the forum. Please browse through the forum below and see whether you can solve the problem by the solution provided or not:
http://forums.ni.com/ni/board/message?board.id=200&message.id=18878&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=140&message.id=23509
You can refer to this KB:
http://digital.ni.com/public.nsf/allkb/C3666BA408F81E59862570D20056E692?OpenDocument
http://digital.ni.com/public.nsf/allkb/5C55288F366FC5CA862570F500680F7C?OpenDocument
Let me know if the article solved your problem or not.
Sincerely,
Krisna Wisnu
Sincerely,
Krisna Wisnu

I get this error detail when building my Installer - CDK_Item_OnDoProperties.vi.

I am upgrading an application from LV 8.5 to 2009. I am able to build the EXE. But when I build the Installer, I get the following error:
The following file(s) are not found on the system:
<Not A Path>
<Not A Path>
Click on "Details" and get........
CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_PreBuild.vi >> CDK_Engine_FileExists.vi
Thank you

Go through all the threads here
and post back whether that helps in solving your problem.
Mathan

Why does it report missing *.dll when running standalone programs on a separate PC without LabVIEW?

I wrote a LabVIEW code to control GPIB, DAQ and Serial port. Then I built an installer including runtime engine. Everything works fine at the PC with the LabVIEW. I copy this installer folder to another computer without LabVIEW. I had no problem to install the program. But after I run the program, it started to ask for nilvaiu.dll. After I copied it under C\Windows\System32\, it started to ask for nimdbgu.dll, then niorbu.dll. Then it reported "The procedure entry point_pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll"
I guess it missed some drivers. So I installed NI-488.2 for Windows on the PC. But it did not solve the issue.

hi there
i recommend to update to DAQ 7.4. the performance is much better.
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

TS1424 Missing DLL when installing itunes

Downloaded itunes 11 to install on my windows 8 laptop and it will not install. Tells me that I am missing a DLL what needs to be done done to fix the problem?

Although you're getting a different error message, try the procedure from the following user tip with that one:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Client JVM crahes because of missing DLLs when trying to access EJB

An addition to my earlier posts...my Client JVM which is trying to access an EJB running on the same m/c ,crashes and the error log created by win2000 is:-
The description for Event ID ( 0 ) in Source ( Websphere ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: IBM WS AdminServer status: 183 WebSphere Administration Server exited with exitcode 3. Restarting .
Has anyone else encountered this before? I'm using WebSphere 3.5.4 provided JDK/JRE for this JVM ...does this mean I'm missing some files in the WebSphere's JDK especcially the ones dealing with RMI-IIOP calls !!
Any help is appreciated !!
Thanks
Sud

Weblogic has no such problem. Try it!

Getting the message "Error generating preview" when building the installer.

I'm getting this error when attempting to expand the application in the installer. However, I am able to preview the built application without errors. Please see the attached screen shots. I have built this application several times before without incident. I made some modifications to the application and now I'm getting this error. What does it mean? I'm using Win XP and LV8.5.
Dave
Attachments:
App Builder Error.pdf ‏55 KB

If I understand this correctly, you are able to build the executable--it's just that you are not able to see the preview in the Application Builder. Is that right?
I searched some of our internal documentation. I found a record of a customer who also experienced the "unable to generate preview" error when upgrading to a new version. He was able to solve it by making sure that all of the VIs ini the build were saved in the current version of LabVIEW. This may be helpful for you.
Also, I would like to recommend that you create a new forum thread rather than posting on a very old thread like this one. You will generate more discussion from the other ni.com users. It also helps our R&D department to automatically keep track of how often these issues are reported.
Jeremy P.
Applications Engineer
National Instruments

INVALID OR MISSING .DLL INSTALLING NEW ODP 10.2 BETA

Hi,
We've been trying to install the new ODP beta and having a vairety of problems, some look like a corrupted .exe but my problem is 'invalid or missing dll' when I click on the beta .exe. No .dll is specified and I've changed the path, reinstalled .Net Framework 2.0 and the database 10.2 EE. Same problem. Any suggestions would be appreciated.
Victor

Hi Victor,
Can you try out the following for me? Download ODAC version 10.1.0.4 or 9.2.0.7 and see if the self-extracting executable works on the same page of the beta. Those executables use the same installer technology as the beta installer. It will help us isolate the problem.
Can you tell me also what OS and what SP you are installing on?
Alex

How to include help files when building installer

Hi!
How can I include my application help manual (in .pdf format) when building the installer such that the file goes into a designated folder and its link appears in the Start>Programs>App folder ?
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Gurdas,
Add the .pdf as a support file in your executable
Create an installer for the executable
Under the "Files" button on the "Installer" tab select the .pdf and select "create program item".
This will place the .pdf in the start menu program group.
cheers,
Brett

Error 1073 when building LabVIEW app which calls LabVIEW dll

I am trying to use application builder to build an application that calls a dll created in LabVIEW. I get an error referencing a vi within the dll (Parse Stored String(multibyte).vi) saying that "This property is writable or this method is available only when the VI is in edit mode." The only option is to Continue which cancels the build. I had sucessfully built this application prior to including vis that call the dll and the program runs fine in the development environment.
Do you have any idea what is causing this and what I cam do about it?

I have found a temporary workaround in which I created a dummy dll that removed all functionality from exported vis but had the same name and function signatures. I then built the application using this dummy dll. Once complete, I replaced the dummy dll with the real dll.
This is not a satisfactory work around because we have to build and maintain two dlls. Also, I'm not sure we can do the same trick when creating the installer with application builder. So, I'd still appreciate any help you can give.

Missing export kernel32.dll when using cvi 9.0 on win 64

Hi,
I just have a new computer (windows 7 64 bits) : PC 1 for short.
My old computer was a windows xp 32 bits : PC 2.
I compile my programs with CVI 9.0.
When I compile a program with PC 1 :
- the install works on PC 1 & PC 2
- the prog installed works on PC 1
- the prog installed doesn't work on PC 2 : Missing export ...... from 'KERNEL32.DLL'
Somebody has an idea?
Solved!
Go to Solution.

Hi,
if your program uses some functions from Windows SDK included in kernel32.dll, the program really depends on this library.
The problem is that for this reason CVI includes kernel32.dll when you build a distribution kit (on the target PCs you should find a copy of kernel32.dll in a subfolder of the one where you installed your application).
The problem is that CVI takes this dll from your development PC (Win 7) and your target PC (XP) can't work with this dll. Win XP has its own copy of kernel32.dll, but MS Windows Operating Systems load dlls from application folder before than from system folder.
And so, simply remove the kernel32.dll dependency and rebuild the distribution kit.
This is a general behavior of CVI and can bring to several problems. I've already reported this to NI, because Operating System dlls must not be included in a distribution kit. If the target OS lacks of some core dll, this is a severe problem, and it's not a situation that CVI can fix simply using some local copies of these dlls.
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

MSVCR100.dll missing on your computer when starting SQL Developer

Hello,
I receive the error MSVCR100.dll is missing on your computer when I try to start SQL Developer.
I completed the following installations:
- Windows Server 2008 R2
- Oracle DB Express Edition
- Java JDK 1.7.0_02
When I now try to start SQL Developer I receive the error message that MSVRC100.dll is missing on my computer.
Does anybody experience the same problem and how can it be resolved.
Thanks
Bernd

Hi,
Not sure what happened to that link, but I as far as I know it should make absolutely no difference for security purposes if one chooses the latest Java 7 update or the the latest Java 6 update. I would guess both code lines are patched to same level.
Perhaps you are referring to recent press about vulnerabilities in Java 7 updates _06 and _07? Those issues only apply to browser plug-ins, totally unrelated to SQL Developer, and those can be disabled easily without removing Java.
The official recommendation is to use the latest Java 6 update (jdk1.6.0-35) for SQL Developer. We recommend avoiding Java 7 due to bugs, but bugs unrelated to security.
Regards,
Gary

When I try to install iTunes 64bit on wndows 7 I get "missing dll" message and install fails...Help!

When I try to install iTunes 64bit on wndows 7 I get "missing dll" message and install fails.
I have restarted my PC. Redownloaded the installer from apple. Checked the hash thingy etc...nothing seems to work...

I am glad you left this up here: nowhere does the error say what the problem is, other than a "missing .dll file." I have seen several other people cite the same issue in detail, but the only responses seems to be 'snarky' -- that the person didn't give enough detail, and that they aren't mind readers.

HT1925 I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

See the user tip: https://discussions.apple.com/docs/DOC-6562 for the most complete information.

Missing .dll? (nilvaiu.dll) ...when building an installer in 2009.

Similar Messages

Maybe you are looking for