Missing files from Jdev Install

Hi,
I have tried to install jdeveloper 11.1.1.1.6. And it seems to install fine but after comparing my install to a peers, and some build errors I noticed I was missing files in jdeveloper\bin. Most notably all of the ant*.xmls. The only files I have in that dir are rcu and rcuJDBEngine..not sure of the extension. I have tried the windows installer as well as the jar. Did full installs, accepting the defaults. Any ideas why this going awry? I am on Windows 7.
Thanks a lot!

On Windows 7 the bin directory does have only the rcu and rcuJDBEngine files, but the JDeveloper runs fine. Is the other install also on Windows 7 and the same edition?

Similar Messages

How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?

hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??

You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck!

Missing file system after installing in SSD

Missing file system after installing in SSD MacBook
Hi All
I recently installed a SSD drive in my Macbook, I used the Disk Utility to clone the old HDD.
When i reboot the machine with the new disk I get the image of a folder with question mark.
If i reboot the machine again and hold the alt key at the chime I can see two disks.
One called SSD and another called Recovery.
if i choose the SSD the OS starts as normal and if i choose the recovery option and check the disk with disk utility
it tells me that everything is fine.
Any ideas how i can make the machine boot as it should without having to hold down the alt key a start up??

Hi i tried this and just got the big symbol of doom at start up.
However, a little terminal witchcraft did the trick!
sudo bless -mount /Volumes/"Macintosh HD" -setBoot

[svn] 4918: Missing file from previous checkin.

Revision: 4918
Author: [email protected]
Date: 2009-02-10 13:56:12 -0800 (Tue, 10 Feb 2009)
Log Message:
Missing file from previous checkin.
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/djapi_en.propertie s

Here are typical layouts for the iTunes folders:
The iTunes folder is normally inside <User's Music>. I get the idea that things are different but I don't have a clear picture yet. I think you've somehow managed to get the media folder pointed at <User's Music> instead <User's Music>\iTunes\iTunes Media. A screenshot of the iTunes > Edit > Preferences > Advanced might help confirm. Once we know what is going on it should be possible to make suggestions as to what to do next.
tt2

[svn:osmf:] 10584: Adding a missing file from that last folder structure refactor.

Revision: 10584
Author:   [email protected]
Date:     2009-09-24 17:19:48 -0700 (Thu, 24 Sep 2009)
Log Message:
Adding a missing file from that last folder structure refactor.
Added Paths:
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/AkamaiBasicStreamingPlugin.as

Hello,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET web application development, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Deleate missing files from catalog

With DSLR cameras we shoot tens of thousands of pictures a year and delete hundreds from our hard drives over time. So how do you delete hundreds of missing missing files that still exist in the catalog, which cause the "Reconnect Missing Files" screen to show? Does a setting exist to remove all missing files from the catalog?

In PSE11, do Find >> All Missing Files and select all and delete.
Thanks
Andaleeb

Exchange Server 2013 Missing file on ISO install Error Code 1603

Hi all, a mystery needs solving any suggestions much appreciated:
We are trying to install Exchange Server 2013 on Windows 2012 server.
The ISO File being used is: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118
All preparation and requisites in place.
During Stage 2 Copying files, we receive an error code 1603 and installation halts.
The error states:
Installing product F:\exchangeserver.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Source file not found: F:\Setup\ServerRoles\ClientAccess\Owa\prem\version\resources\themes\base\0\microsoft.o365.controls.timeline.mouse.css.
Verify that the file exists and that you can access it.'.
We have verified that the Path in the error is correct and exists BUT the file is not present within the 0 folder.
We have downloaded the ISO from our Action Pack resources twice and attempted 4 separate installations.
We have tried both Mailbox/Client Access and Mailbox only installations.
The missing file: microsoft.o365.controls.timeline.mouse.css. Hopefully the only file misisng???
Any ideas anyone, could we source a different ISO or copy of the file or ?????
Many thanks in advance

Had the same issue with Exchange 2013 SP 1 Downloaded as an ISO from the Volume License Center, installing on a new Server 2012R2 STD box. I found the equivalent file in another ISO but discovered it was just an empty CSS file. So the easiest way is to not
bother trying to find the file but: 1) open notepad, 2) set save to "All Files", and 3) save an empty CSS file with that filename then place it in the directory indicated in the path given in the error. (Make sure it saves as
a CSS and not as a TXT.)
I reran the install and it completed without issue.

Some missing files from itune

I downloaded iTune 5, and I don't know what went wrong, but I couldn't use iTune.
I tried to reinstall, and install again...but now I get the msg "some files are missing reinstall itune...
I tried to install from CD I got when I bought ipod mini, but still the same. I wonder how I can get those missing files...

With respect to the hardcoding of 127.0.0.1:8888 it is how it was intended.
If you go through the setup and deployment guide for the PIP, and follow through the steps in page 19 (Section "Configuring Integration Files"), you'll find that we include a utility in the PIP that handles substitution of the server names/ports .. one of the first steps is to setup your deployment server values in a file called CRMIntegProcessParameters.xml, where you specify your server values, after which running the utility substitutes the server-names and ports.
With respect to the missing files, again I don't see the issue. the files are included in the posted zip file in which the PIP is delivered. I just reconfirmed opening the zip file and reextracting the file reported as missing .. and it is present.

"Itunes missing files - please re-install"

Hi I wonder if anyone can help me. I am having major problems ever since i downloaded the newest update. Cant access my itunes now as keep getting a message that says there are files missing and that I need to reinstall itunes. Have tried over and over to re-install but still keep getting the same message!! Many thanks,

Aichenelf,
I cannot thank you enough for your post! I upgraded my iTunes because some of the freebie songs on Tuesday said they required a higher version of iTunes. Wow! The two weeks since that fateful day have been filled with problem after problem. The 7.5 would not work on my machine, and I got the same "missing files" error. I also got errors that said the QuickTime would not work and that iTunes required QuickTime. I uninstalled all Apple products and tried to reinstall older versions but was not allowed to by the software. I was pulling my hair out. Finally, I read somewhere to go to the directory called WINDOWS\Downloaded Applications\ and to delete any previous versions of iTunesSetup.exe. I also obtained the version 7.2 of QuickTime by itself and installed it on its own. Then, I reinstalled 7.4.3. It took tons of time and tons of trial-and-error to resolve this ridiculous issue. I say "ridiculous" because there is no reason that I can see for artists to insist that their fans use the most recent version of a software. Not everyone can afford to go out and get a new computer to run all this stuff. I digress --> Free or not, I won't go there again. Thanks for listing the older software verions' release numbers ... Made my life a lot simpler. I obtained my older versions by doing a Google search that led me to a place called the File Hippo. Anyhow, hope this can help others who got into the same situation! Back up your library before uninstalling, too! I renamed mine to simply "Music" and have successfully reimported it since the fix. Not sure if my playlists are gone forever, but can recreate them a lot easier than reloading music. Peace & good luck ... I know how frustrating this is !!!

How to reconnect missing file from iCloud on PSE 12?

I placed all my photos in the iCloud and also copied them to a flash drive and removed them from the hard drive. Now Organizer asks to reconnect missing files. The drop down menu in Browse does not list the Cloud as an option. How do i reconnect from the Cloud?
Thanks, Barb
I am using a MacBook Pro with Yosemite

You will need to keep the flash drive connected. PSE will contain links to it and the images.
Otherwise you would need to copy the files to a folder in Pictures on your internal drive or an external hard drive.

Recover missing files from FAT32 SD card?

I got back from a trip and used the SD card slot in my MacBook Pro to import my photos -- first into Aperture, and then using Image Capture to make a second copy as regular image files. Then I used Image Capture to delete the files from the card.
So far, so good....except nearly 300 photos have are missing -- the last 300 I took on the card. If I look at the card in the Finder now (it's FAT32), there aren't any photos on it. But there is still over 3GB of data, suggesting the missing photos' data is on there somewhere.
Any suggestions for how to recover it? TechTool Pro doesn't see the card at all (maybe doesn't support FAT32?).
Thanks.

You can follow the way to see how to recover deleted files from sd card. Connect the data cable for the card reader to an empty USB port on your computer. Insert the SD card into the external or built-in card reader. Right-click the Recycle Bin icon on the desktop, then click "Open." Highlight and select the deleted files on the SD card you want to restore to the device. Right-click one of the selected files on the SD card and then click "Restore." Besides, you can also use Data Recvoery to restore your data even your SD card is damaged.

SubVI or controls not loaded - missing files from location misc.llb

When I try to load VI in Labview 2012, I get several errors for missing files:
C:\Program Files (x86)\National Instruments\NI ELVISmx\misc.llb\subRecordEEPROMValues.vi
C:\Program Files (x86)\National Instruments\NI ELVISmx\misc.llb\subGetDevProductType.vi
C:\Program Files (x86)\National Instruments\NI ELVISmx\misc.llb\ctl_ProductType.ctl
Why am I missing these required files?
Solved!
Go to Solution.

kdoggett
The VI you're using sounds like it's using those subVIs and they're not in those locations. This can be because of a custom install where the path is not that one, or it could be a version change and those files were moved. Did you make this VI? Has it worked before? Did you install NI ELVISmx? That might be worth a shot since those are the folders that it's looking in. Just make sure the version you download in compatible until your verison of LabVIEW.
-KP
Kurt P
Automated Test Software R&D

Missing files from mountain lion software.

I have lost some files for mountain lion and don't have enough space to download it. I have backed up my files. If I changed my hard drive capacity will I be able to download the software?

Wow... quick responses. After a LONG time and alot of troubleshooting, I have determined that my firwire ports are not working. This is the process I went through to determine this.
Was running Mountain Lion and using Target Disk Mode to try and copy some files to another computer. Plugged my computer (running in TDM) into another computer and found that my HD wouldn't show up. Rebooted my computer and noticed that it wouldn't boot into Mountain Lion. It would sit on the Apple Logo with a spinning gear. After a while of trying to troubleshoot the problem, I then tried reinstalling Mountain Lion on a different HD (removed my internal one and replaced it with another one - the one I'm using currently, so I know it works). I restored the Mountain Lion InstallESD.dmg image file to an external HD and tried booting from it. Upon trying to boot from the external drive, I too found that I was getting the Apple with Spinning Gear. Tried to boot to Lion and got the same thing. I then tried to install Snow Leopard and after a long time, it did install, but took a LONG TIME to boot up. Once it booted, I checked in the System Profiler and found that my firewire ports were not working (driver wasn't loading or something the like - I don't remember the exact error code). I then deleted the firewire kext files as many others have done, and boom, it was very fast.
This brings me back to my original question. How would I remove the firewire kext files from the InstallESD.dmg file so that I can boot into Mountiain Lion? Once I am able to install the OS, I will then delete the kext files in single user mode.
I should also mention that I have found the BaseSystem.dmg file and am currently trying to create a copy of it without the kext files. I guess the problem I am having is getting my computer to boot using the modified BaseSystem.dmg file located in the InstallESD.dmg file.
Thanks again to all of you that responded so quickly.
Todd

Has anyone gotten a missing file error when installing 10.5 on windows 7

I have tried to install iTunes 10.5 on my windows 7 64 bit laptop and keep getting a "missing file error" but it doesn't say what file is missing and I haven't been able to find any info to help resolve the issue. Any help would be appreciated!

Ok, if you get this message I've read a bit further and found that you must uninstal everything that has something to do with apple. this includes the device driver. this link may help you with that. http://support.apple.com/kb/ht1925 Once I went through the list and deleted everything (device support is a *****). I installed it again and it came up with the same error. I then clicked ok and it rolled back but automatically started installing again and it worked. I know have itunes 10.5. but know my iphone 4 wont connect to it, lol. it says i have to reinstal because the driver didn't take or something. I really want the OS update for my phone but gd this is a bit much.

Why do I have Missing files from LaCie to Elements 9 Organizer on Mac

I am a new Elements 9 user and have a Mac OS 10.6.5. I have attempted to load all my pictures from a LaCie external hard drive into the Organizer, but when I look at them in the Organizer very many of them indicate that the files are missing. I have not renamed the files, nor have I moved them since they have been in the LaCie. What in the world am I doing wrong!!!???

When I first moved pics into the Organizer, some were in folders on my laptop, some in the LaCie, some on the desktop etc. I did subsequently move all pics into the LaCie from the various places, and then moved them again into the Organizer. Maybe that confused the situation. Should I remove all images from the Organizer and then get all files from the LaCie once more?
Louise Giovanella
1530 Hopkins Road
Panton, VT 05491
v: 802-759-2529
[email protected]

Missing files from Jdev Install

Similar Messages

Maybe you are looking for