Missing Function - Aging Report not match in System Currency in SBO 8.8

Dear all,
Version: (Please provide the current version)
SBO 8.8 Patch: 10
Description of requirements: (Please provide a detailed description)
In mentioned patch level, the result/outstanding balance of Aging Report in System Currency was difference when selected 'Display Reconcilied Transactions' or not. The outstanding balance should be be same on both selection.  
Valid as of: (Date that this legal requirement is applicable)
N/A
Business needs: (Please describe the impact on your business, if the functionality is not realized)
If the Aging Report cannot disppay the outstanding documetns for reconcile with customer, they cannot check with customers.
Examples: (Please describe a typical example, how the functionality should work.)
Generate the Aging report in  System Currency
selected 'Display Reconcilied Transactions' including all transactions and balance is same as Trail Balance
un-selected 'Display Receoncilied Transactions' does not inclding the transactions that Local Currency is zero amount, but System Currency is not zero. The outstanding balance is different to the result of the above selection and Trail Balance as well.
Current Workaround: (Please describe the workarounds you are using at the moment)
Print the Aging Report with selected ' Display Reconcilied Transactions' to show ALL transactions to reconcile the transactions.
Proposed solution: (Please suggest how the new functionality should work)
selected 'Display Reconciled Transactions' or not, the outstanding balance should be the same.
Best regards,
Michael

Bapi's do not set sy-subrc. The only way to check if it was succesfull is to loop into the return table for error messages:
You have to use BAPI_TRANSACTION_COMMIT after calling BAPI_PO_CREATE1:
    READ TABLE errmsg TRANSPORTING NO FIELDS
                        WITH KEY type = c_e.
    IF NOT sy-subrc IS INITIAL.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = c_x.
  ENDIF.

Similar Messages

  • DI: Stock Transfer error (Unique field value does not match the system ...)

    Hi
    I made an add-on that makes stock transfers via DI API. The add-on has been running for two months with more than 10,000 stock transfers with almost no problems.
    The company that is using the add-on have all their products managed by serial/batch numbers.
    But just with one transfer Im getting the error in the stock transfer Add() method:
    "Unique field value does not match the system serial number [(----)29-52]"
    And I tried to debug it without success, I checked that the system serial numbers exists in the origin warehouse and are available. And I really can't find where is the problem.
    If somebody knows what this error means, please let me know.
    Thanks in advance,
    Regards,
    Allan

    Hi János, thanks for your answer.
    I found what was the problem, it was not exactly what you told me, but you gave me some insights to found the problem.
    The thing is that Im using UDT's to store the information of stock transfers (before creating a real SAP stock transfer), because of the funcionality of the add-on. After some user have done some steps or validations, the add-on actually does the real SAP stock transfer.
    The problem here was that my tables had some InternalSerial for some Item, for example the serial A-234, and before the real SAP stock transfer was made, they changed the serial from A-234 to A234 (in the serial number management). So the add-on was trying to create the transfer with the serial A-234, but the serial A-234 no longer exists.
    I have to create a validation that if they change the serial number for an item, I have to change it in my UDT's.
    On the other hand, Im not sure, but I think that I read before that you made a Warehouse Management add-on. This add-on that Im working now is a kind of warehouse management.
    Im having a lot of headaches because the poor accessibility to the user fields in the OSRI and OIBT tables. Im sure that you have faced problems with this. If you have any tips or advices about this it would be greatly appreciated.
    Thanks again,
    Regards
    Allan

  • Account Currency is not matching with document currency

    Hi,
    In Sales A/R Invoice Screen when Iam trying to add a document its giving an error by saying Account Currency is not matching with document currency.
    (Item is an Excisable Item and Currency is BP Currency)
    Pls let me know the reason.
    Thanks&Regards,
    Chakrapani Bandaru
    9849290882

    Hello chakrapani bandaru,
    Please set all the G/L accounts involved in the transactions to Multicurrency accounts (e.g. BP, revenue tax accounts etc.)
    It means BP account, revenue and tax account
    as well, even if there is 0% tax.
    Please check Administration/System Initialisation/Company Details/ Basic Initialisation/Default Account Currency and make sure it is set toMulti Currency.
    The exchange rate difference account should also be set to multi currency.
    hope it helps.
    Wilm Wang
    SAP Business One Forums Team

  • Solman Early watch report not generating PRD system report.

    Hello All,
    I have issues related to Earlywatch Report. We have configured EWA for all our 3 systems in Landscape (DVM, QVM, PRD), The reports generate on weekly basis. But I noticed that EWA report in Solman is not getting generated for PRD systems. SDCC was not active so I activated that. Next to PRD it gives red flag stating Session Data Overdue error.
    I went to PRD SDCCN Tcode, there I created 'Refresh Session' - it failed with following error.
    Refresh of session overview failed from destination SM_SOLCLNT300_BACK
    Sessions cannot be refreshed from destination SM_SOLCLNT300_BACK ( SOL , 0020270483 )
    Password logon no longer possible - too many failed attempts
    error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SOLCLNT300_BACK
    Refresh of session overview started from destination SM_SOLCLNT300_BACK
    What user is it trying to refer ???? If its referring SM_SOLCLNT300_BACK user then it has its own default password which I dont know.
    The report does get generated in SAP Marketplace Inbox. In SDCC we have check mark next to Solman + SAP for report generation for PRD system,
    Is it reports get generated in Solman OR SAP not BOTH destination ?????.
    The last 2 reports (3rd Dec & 26 Nov) of PRD got generated in Solman but otherwise it always has Red Flag next to it stating "Data for this session is overdue"
    I did the connection test & authorization test (Tcode SDCC) in PRD & they were successful.
    Kindly suggest how should I resolve this issue.
    Thanks
    Rupali S

    Hi,
    I have tried all possible steps..I checked all the RFC destinations of all the systems (DVM, QVM, PRD, SOL) & they are working fine, some had issues with passwords & user locked...but then I corrected those errors.
    Tests were successful as below.
    In PRD for SDCC_OSS
    RFC destination SDCC_OSS is functional (ping and logon authorization check done)
    RFC destination SDCC_OSS has authorization for all needed function groups
    Solman – PRD
    RFC destination SM_SOLCLNT300_BACK is functional (ping and logon authorization check done)
    RFC destination SM_SOLCLNT300_BACK has authorization for all needed function groups
    But still get error message if I create Refresh Session.
    Error transferring session data to SM_SOLCLNT300_BACK
    Password logon no longer possible - too many failed attempts
    transfer aborted: communication failure in BDL_START_OF_SESSION_DOWNLOAD
    ANALYSE_PERIODIC_JOBS : no matching interface found
    function module not found
    ANALYSE_PERIODIC_JOBS : funcname /SDF/ANALYSE_PERIODIC_JOBS , module 000104
    SAPWL_TCODE_AGGREG_MONTH_T : no matching interface found
    function module not found
    SAPWL_TCODE_AGGREG_MONTH_T : funcname /SDF/RBE_OBJ_USAGE_MCST , module 000097
    I believe becoz of this I am getting the Raise Exception error due to which 3 jobs are getting cancelled which are related to EWA (I have posted query for the dump issue seperately).
    I am not understanding why am I getting those cancelled jobs daily when EWA reports run weekly (Mon).
    Please suggest.
    Rupali S

  • Need SAP BW AR Aging Report with R/3 Aging Report Should Match

    Hello All,
    Could you please let me know SAP Delivered AR Aging Report on BW Side should match with SAP R/3 AR Aging Report for a given Customer.
    When I ran the report on BW Side I am able to match the report values with InfoProvider Values and also with RSA3 Extractor (0FI_AR_4).
    But when i tried to compare BW report with ECC Report values are not Matching at a given Customer Number.
    Please explain the best practice to match the values of BW Standard Aging report with ECC standard AR aging report.
    Thanks,
    Geetha

    Hi,
    I am actually running the SAP Delivered Report in BW.
    So I didn't changed any thing in report.
    I m running the report in ECC using s_alr_87016128 tcode.
    Still I m getting the amount difference.
    I have checked at customer level with company code and Key date.
    Can i get inputs on these.
    ECC Report s_alr_87012168
    BW Report:0FIAR_C03_Q0005
    Thanks,
    Geetha

  • Trial Balance - Encumbrance & Encumbrance Details Report not matching

    Hi,
    Our client has recently raised one issue saying Trial Balance - Encumbrance with 'Obligation' parameter and Encumbrance Details Report (both reports period name and Enc Date to choosen as FEB-12 and 29-Feb-2012).
    The final totals related to both reports does not match and why could be such difference occuring between the two reports. As both reports logically dealing with Enumbrance one at PO level and another one at GL level. And po transactions have been transferred to GL.
    Please explaing how to search those records which are showing these differences in main report.
    Appreciate in advance for your reply.
    Regards,
    Prasad

    Hi,
    This seems to be due to the rounding issue in the database.
    Can you check and confirm whether any time during the business process, in the system the decimal settings were increased or decreased ? If yes, then it can be due to the calculation (rounding)
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Liabilities Ageing report not acknowledging old journal entries

    Hello,
    I have just upgraded a system from 2007A SP00 PL48 to 8.8 SP00 PL17.  When I ran the Vendor Liabilities report in 8.8 I noticed that one of the business partners has a journal entry and an open invoice.  The journal entry has no value when displayed in the report however when i open the journal up, it is showing a debit for the exact same amount as the invoice, but was created as a result of a foreign exchange gain and has not been reconciled against the invoice.  The ageing report is showing that the invoice is still outstanding and needs to be paid.  However when I run exactly the same report in version 2007, the two amounts are seen to conteract each other and therefore no oustanding amount is shown in the ageing report for this customer.  When I reproduce the scenario in 8.8 with a new invoice and new journal entry, the two transactions are shown to counteract and no outstanding balance is displayed.
    Does anyone know if there is a problem with old journal entries being recognised in the ageing report in version 8.8 or specifically journals created as a result of foreign exchange rate losses/gains?
    Many thanks,
    Kate

    Hi Kate,
    We recently upgraded to 8.8 and in reviewing the aging reports realized some manually reconciled entries had to be redone.
    In particular, it seemed to be for entries where foreign currencies were involved. There is a new field in the Internal Rec window in the top left corner - select it and the entries with only SC value will then appear (i.e. you will see all unreconciled entries) along with other entries.
    HTH,
    Heather

  • AGEING REPORT NOT UPDATING

    After made partly payment to an invoice of vendor, and proecessed it in the outgoing payment, why the ageing report does not reflect the balance of the that particular invoice, instead of showing the original amount and the payment, which makes the ageing report very long and confused. How can I solve this problem? thanks.

    There is no problem with AP balance. After payment made, it is reduced. The only one that remain unchanged is doc status. it is still open since the payment is partial. I suggest to cancel the payment and then repaying again. If problem still persists it will be bugs in the PL you are currently using.
    Rgds,

  • Aging report not picking write data

    Hi,
    My requirement is for vendor 122 within certain period for certain ekorg-c100
    and D100 show different amount.
    is it possible for vendor aging report.
    I developed a vendor aging report for displaying comp-code, vendor, Pur-org,
    Total-amount, month wise amount picking from bsik-dmbtr.
    I added a field EKORG ( Pur Org ) from lfm1 table with D100 and C100.
    And total amount for vendor 122 for a period from 01.01.2009 to 09.09.2009 is 5000/- Rs.
    when a new P.O. is crated using Ekorg C100 of amount 2000/-.
    My problem is :
    After execution of report for same vendor 122 with ekorg c100.
    Then it shouid show 7000/- Rs.
    And After execution of report for same vendor 122 with ekorg D100.
    Then it shouid show 5000/- Rs.
    My report is showing same amount in both d100 and c100.
    My report is showing same amount 7000/- in D100 and C100 for vendor 122.
    Amount picking Bsik table has not ekorg field.
    Please let me know how can i do that ?

    Thanks for replying. I am sending more info regarding my object.
    My requirement is for vendor 122 within certain period for certain ekorg-c100
    and D100 show different amount.
    is it possible for vendor aging report to show purchase organization wise amount for particular vendor and amount ?
    tables , lfa1, lfm1, bsik.
    I developed a vendor aging report for displaying comp-code, vendor, Pur-org,
    Total-amount, month wise amount picking from bsik-dmbtr.
    I added a field EKORG ( Pur Org ) from lfm1 table with D100 and C100.
    Report is working fine for displaying Purchase organization.
    And total amount for vendor 122 for a period from 01.01.2009 to 09.09.2009 is 5000/- Rs.
    when a new P.O. is crated using Ekorg C100 of amount 2000/-.
    My problem is :
    After execution of report for same vendor 122 with ekorg c100.
    Then it shouid show 7000/- Rs.
    And After execution of report for same vendor 122 with ekorg D100.
    Then it shouid show 5000/- Rs.
    My report is showing same amount in both d100 and c100.
    My report is showing same amount 7000/- in D100 and C100 for vendor 122.
    Amount picking Bsik table has not ekorg field.
    Please let me know how can i do that ?

  • RE: COPA report and customer line item report not matching

    Hi All,
    COPA report and customer line item reports (fd10n) are not matching please let me know the reason.

    ok

  • Aging Report not displaying all BP's

    Experts,
    I have a client who recently upgraded to 8.8 PL 10. They found that when running the Customer Aging report they did not see all the customers in the list. Even customers with a balance.
    I have looked into this and found some confusing results... I make sure that there is no selection on the Customer Codes or groups and that there is only one accounts receivable in the Control account selection (They only have one). With this selection I sometimes got all the customers and sometimes not. I could not determine a common factor.
    Is this an issue with 8.8 PL 10?
    Any help wold be appreciated.
    Marli

    Gordon,
    Yes, I tried with the Display customers with zero balance selected. Then I could see all the customers.
    But the specific customer that did not show up when this was not selected have a balance.
    Thanks,
    Marli

  • Report not matching FBL5N & FBL1N ? ? ? ? ?

    Dear All
    Experts ,
    Facing one problem that our customer is our vendor too and for that we do refer FBL5N & FBL1N.
    It is required in according to that both reports must matched. But once the user reverse one document and it is
    not showing in FBL1N report while FBL5N showing right balances and transaction figures.
    What may be the reason for not showing one reversal ?
    Experts please help.
    Regards,
    Pankaj.

    Hi
    Kolipara.
    If I check those boxes will it solve my problems ?
    How to deal with the earlier posted entries ? The difference is around Rs.20,000/- and if I again reverse the document
    the effect will take place at both side and difference will be same as earlier.
    So I want to rectify that issue.
    further all transaction will manage by ticking those boxes but earlier are much problem either.
    And I checked the masters of my other vendor and customer who are same in those, there boxes are unicked but
    still balances are matching . . . How so ?
    Can you please put a focus on it !
    Regards,
    Pankaj.

  • Report not matching

    Hi,
    We have created a customized report for "Totals by posting key for trade account". When we match the figure of the report with FS10N for a particular month, the difference is going beyond 1 million.
    Can anyone help me in where to check to find the different. In QAT, the figures are matching but in PRD is not matching.
    Any advice/suggestion/solution is appreciated.
    thanks

    Use tcode SE16. Put your table name in. Start of with BSIS(open) then move on to BSAS(cleared). Put in you parameters Company code, account and period. You will get a list of all the GL postings. Compare that to a list produced by you custom program. You will need details from your custom report in order to find the differences. Start off with a day or some small sample.
    Points assigned are appreciated.

  • Producing warnings when cvi function parameters do not match function prototypes

    Is there a function prototype in cvi code which would generate an error/
    warning that my parameters do not match those of the function prototype. I
    am using MSVC 6 for development.
    Ed Manlove
    [email protected]

    There is a parameter in the Options>>Build Options menu that do that : check "Require fonctions prototype".
    I think that a function can't do that because you have to check that during the compilation. If you want to check parameters at the run time ( like , scanf function ) you have to do by yourself inside the function.

  • Doc currency is not matching to Transaction currency in KE5Z

    Hi,
    A FI document is posted in USD for a company whose local currency is SGD, PCLC is USD. Now when i execute KE5Z for a particular GL account and PC i get the correct CoCd Lcl currency-SGD, PCLC-USD and the transaction currency-USD.
    But when i execute the same report for a different GL account/same PC to which same postings have happened i get the transaction currency as SGD instead of USD.
    Please explain what could be the reason that for one account i am getting the doc currency as the transaction currency which is correct but for another account i am getting CoCd Lcl currency as the TC.
    Please note that the doc currency for Profit center documents is USD but i am getting as SGD in the TC column of KE5Z. Also note  I am referring to one controlling area and one company code.
    Regards,
    DP

    Hii!
    Please check following setting
    In transaction FS03 you can see how an account is maintained. On tab
    folder 'Control Data' you see the flag 'Only balances in local crcy'.
    Activating this flag indicates that balances are updated only in local
    currency when users post items to this account (please also see the F1
    Help on that flag).
    BR
    Werner

Maybe you are looking for