Producing warnings when cvi function parameters do not match function prototypes
Is there a function prototype in cvi code which would generate an error/
warning that my parameters do not match those of the function prototype. I
am using MSVC 6 for development.
Ed Manlove
[email protected]
There is a parameter in the Options>>Build Options menu that do that : check "Require fonctions prototype".
I think that a function can't do that because you have to check that during the compilation. If you want to check parameters at the run time ( like , scanf function ) you have to do by yourself inside the function.
Similar Messages
-
Missing Function - Aging Report not match in System Currency in SBO 8.8
Dear all,
Version: (Please provide the current version)
SBO 8.8 Patch: 10
Description of requirements: (Please provide a detailed description)
In mentioned patch level, the result/outstanding balance of Aging Report in System Currency was difference when selected 'Display Reconcilied Transactions' or not. The outstanding balance should be be same on both selection.
Valid as of: (Date that this legal requirement is applicable)
N/A
Business needs: (Please describe the impact on your business, if the functionality is not realized)
If the Aging Report cannot disppay the outstanding documetns for reconcile with customer, they cannot check with customers.
Examples: (Please describe a typical example, how the functionality should work.)
Generate the Aging report in System Currency
selected 'Display Reconcilied Transactions' including all transactions and balance is same as Trail Balance
un-selected 'Display Receoncilied Transactions' does not inclding the transactions that Local Currency is zero amount, but System Currency is not zero. The outstanding balance is different to the result of the above selection and Trail Balance as well.
Current Workaround: (Please describe the workarounds you are using at the moment)
Print the Aging Report with selected ' Display Reconcilied Transactions' to show ALL transactions to reconcile the transactions.
Proposed solution: (Please suggest how the new functionality should work)
selected 'Display Reconciled Transactions' or not, the outstanding balance should be the same.
Best regards,
MichaelBapi's do not set sy-subrc. The only way to check if it was succesfull is to loop into the return table for error messages:
You have to use BAPI_TRANSACTION_COMMIT after calling BAPI_PO_CREATE1:
READ TABLE errmsg TRANSPORTING NO FIELDS
WITH KEY type = c_e.
IF NOT sy-subrc IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = c_x.
ENDIF. -
Using Express when the database schema does not match theclass model
We are working on a large pay/personnel management system and are
evaluating Forté Express and Sage Scaffolds. We need to answer some big
questions in the near future, and I was hoping that there may be someone
out there with the answers.
1. How different can the database schema and the class model be, before
Express becomes a bad choice of framework? What solutions exist for cases
where Express is still a viable option?
2. Assuming that we can get around the problem in question 1, will the
Application Model features still work afterwards? (i.e. how sensitive are
the client-side services to changes in the database services?)
3. Express seems to use domain classes everywhere, whereas we are always
being advised to use scalar attributes wherever possible. How badly does
this affect the performance of Express applications?
4. Has anybody out there used Sage Scaffolds on a large project recently?
How did it go? What problems should we watch out for? Doesn't its 'Chain
of Responsibility' pattern tend to produce a lot of unnecessary objects at
run-time?
5. Has anybody used the Born collection classes? How do they compare with
Brahma's Fortify?
Thanks to those who have already helped - all input gratefully received!
Tim Kimber
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>I did all that before posting the orignial post..
declare
v_schema_exists varchar2(1) := 'N';
res boolean;
schemaURL varchar2(100) := 'T0090.xsd';
schemaPath varchar2(100) := '/prmt/xsd/T0090.xsd'; --'/public/T0090.xsd';
xmlSchema xmlType := XMLTYPE(bfilename('DIR_PRMT_OUT_CVIEW','T0090.xsd'),NLS_CHARSET_ID('AL32UTF8'));
begin
begin
select 'Y'
into v_schema_exists
from sys.all_xml_schemas -- changed from user_xml_schemas
where schema_url = schemaURL;
dbms_xmlSchema.deleteSchema(schemaURL,4);
exception
when NO_DATA_FOUND then
null;
end;
if (dbms_xdb.existsResource(schemaPath)) then
dbms_xdb.deleteResource(schemaPath);
end if;
res := dbms_xdb.createResource(schemaPath,xmlSchema);
dbms_xmlschema.registerSchema ( schemaURL, xdbURIType(schemaPath).getClob(), TRUE, TRUE, FALSE, TRUE );
end;
/ I guess my understanding was that I could grant another oracle user access to my registered schema just like I can grant a single user access to a table. Evidently I only have two options. Only the schema owner can use the schema or everyone can use the schema and I cannot grant access to a single user other than myself.
Edited by: Mark Reichman on Jul 2, 2010 9:08 AM
Edited by: Mark Reichman on Jul 2, 2010 9:09 AM -
PDF with javaScript function from Pro, not fully functional in Reader
Hi,
I followed recommendations to set up a button and apply a javaScript so that when end-user clicks on button, they can upload an image and then save the PDF.
However, in Reader, the file extension drop-down is locked and forces end-user to only have the option of selecting a PDF as their image. I was going for JPG or GIF here at the very least.
Is there anything else I could do, or am I stuck? In Pro, the drop down presents a wide array of file types in which to select from...
Thank you!Adobe Reader can only insert PDF files as images. Adobe Reader can't convert other files.
-
How to relink clips when FCPX thinks they do not match
FCPX - I have been trying for hours to relink my clips: they are the same yet FCPX says this every time: "The original file didn't have audio, but the new file does." I need to find a way to force relink the clips. my project is too big to start doing this manually. and you got it - this was due yesturday. If anyone has found a way to fooling FCPX to mach clips please let me know. I have already tried to reimport the clips - no luck. really desperate. hopefully someone knows how to relink when FCPX thinks it can't.
Thanks
MOYou would need to provide clips that match in terms of audio channels- if FCPX expects an original clip that had no audio channels that what you need to supply in order to relink. With QuickTime Player 7 it's very easy to resave clips without an audio channel:
http://support.apple.com/kb/HT3678
This can also be done with MPEG Streamclip or Compressor. -
I want to my iphone don't send busy tone when I choose do not disturb function.
I want to my iphone don't send any busy tone to callers when I choose "do not disturb" function in new IOS...We must choose answer type..for example : send busy tone and don't send busy tone.
Additionally iphone must not turn light when incoming calls in "do not disturb function"
Because we don't want disturb but sametime our friends angry to us when they hear busy tone..Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback -
SAP HANA D3 Library errors - "queue" is not a function
Hello all,
i have a question regarding D3 Integration into SAP HANA and hope one can help me.
The last days i developed a D3 Choropleth (spatial data) with hover effects, tooltips and a legend. I have an existing SAPUI5 and HANA XS application running and now i wanted to integrate my D3 Choropleth.
1 ) First of all, i added the following tags into the head section of the index.html file of my SAPUI5 project as i need those libaries.
<script type="text/javascript" src="http://d3js.org/d3.v3.min.js"></script>
<script type="text/javascript" src="http://d3js.org/queue.v1.min.js"></script>
<script type="text/javascript" src="http://d3js.org/topojson.v1.min.js"></script>
2) Then, i added the program code of my D3 Choropleth into the view.js of my SAPUI5 project:
var html2 = new sap.ui.core.HTML("d3choropleth", {
content: "<div class='D3Choropleth'>" + "</div>",
preferDOM: false,
afterRendering: function() {
.... here is my code ...
I have a SAPUI5 shell with different NavigationItems (tabs) and for this D3 Choropleth tab i am writing:
case "WI_choropleth":
oShell.setContent(html2);
break;
When i start my SAPUI5 project and klick on the tab where the D3 Choropleth should be rendered, i get the following errors:
d3.scale.threshold is not a function
d3.geo.albers center is not a function
queue is not a function
Moreover, i have to say that my D3 Choropleth works standalone outside HANA very well, that is why i assume it is a library integration issue.
In my browsers (firefox) developer console i can see that there is a D3 library loaded by default (as it is one of SAPUI5s components) with the path: sap/ui5/1/resources/sap/ui/thirdparty/D3.js.
BUT this is a really old version of D3 (2.9), the current release is D3 (3.4), so maybe the problem is that the D3 libary that is loaded by default overwrites my integration of D3 (script tag above)?
Does anyone have the same issues and knows how to solve that? Furthermore it seems that the d3 queue library is also not integrated as the error "queue is not a function" occurs and i also ask me how to solve that error.
We have SAP HANA Developer Edition Revision 80 (by AWS), HANA Studio and Client are on revision 73 (64bit).
It would be great if anyone could help me with my issue.
Further question: Is the current release of D3 going to be integrated into the next HANA revision?
Thanks a lot & regards,
AndreasHi Andreas,
You are right. The way you integrate the libraries in your code is not the way that will work for HANA XS projects. This is why it doesn't accept the queue function (library is not loaded) and also why the 3.x only D3JS funcitons are not accepted (only the internal D3JS library is loading and these functions were not a part of 2.9 yet).
To integrate third party libraries, you need to add XSJSLIB files to your project. These need to pass the server-side JSLint checks before accepted by the XS engine. (Client-side checks that fail might not count though).
Please see this post from David Brookler for more information.
http://scn.sap.com/community/developer-center/hana/blog/2013/12/23/db001-using-libraries-in-xs
Best regards,
Tobias -
Question about function parameters
Looking at a piece of code.
A function is defined with 3 parameters. None of the parameters are "default" parameters.
Call to the function only passes 2 paramters. ie myfunc(parm1,parm2). Have read the docs regarding
function parameters. Not sure how this is working (which it is). Am I missing something ?
I am new to flex so it could be I am missing a fundamental concept of flex.
thanks.Thanks but its not defaulted.
Here is the call
mystuff.call(buildstuff, parms);
here is the definition:
public class mystuff{
public function call (remote1:string, remote2:Function, parms:Object):void{
remote1 = "prefix." + remote1;
different.call(remote1, new Responder(remote2, this.onFault),parms);
public function onFault(fault:String):void{
Alert.show(fault, "Error:", mxcontrols.Alert.OK);
thanks. -
HOW CAN I ACTIVATE THE DO NOT DELETE FUNCTION IN IW32?
Good day!
Im trying to mark a work order not for execution but my Order - Functions - Complete - Do Not Execute function is not activated. Can you help me with this one?Hello Rico,
can you pls give more details about your issue.
In which product are you having this problem ?
Maybe this forum is not the best place as we concentrate mainly on the BO product suite.
Thanks for clarification
Falk -
RFC Function Module - Message Reference parameters are not allowed with RFC
Hi,
Ive checked the Remote-Enabled Module radio button, declared Import and Export parameters using Type typing and checked the Pass Value in export and import parameters but I still receive message Reference parameters are not allowed with RFC and not able to activate the function module.
Am I missing something?
Regards,
...NaddyHi all,
I faced the same problem and solved it ,
You have defined a reference parameter for a remotely called
function module. However, only value parameters are allowed
for this type of module.
Procedure
Change the reference parameter to a value parameter.
Guys pls .don't leave the thread un-asnwered when you solved problem , post the solution it might be useful for others also.
Regards
Krishna Acharya -
How to automatically load function parameters when editing c/c++ DLL call?
I built a DLL in CVI and is used in TestStand, I want this DLL to have the ability to automatically load function parameters after specifying Module pathname and function name in "Edit C/C++ DLL Call" dialog? How can I do it?
Staring with CVI 7.1 and TestStand 3.1 you do not need a type library for TestStand to load parameters automatically. Just make sure you declare your exported functions with the __declspec(dllexport) modifier as in the following code:
__declspec(dllexport) void fun(void) -
Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..
I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand
-
to
We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now so we can possibly recover our laptop? Any one who can point us in the right direction that would be great and we would be very grateful. Thanks So MuchLojack for laptops - if that is the product you purchased and installed, you will need to read the user manual or contact the manufacturer as it is 3rd party. You did file a police report right?
-
Since updating to Firefox 6.0 I am no longer able to add bookmarks on Yahoo Toolbarl. I receive the following Java Error message: "Exc in ev handl: TypeError: this.oRoot.enable is not a function." When I hit the OK button in the error message it opens up "Add a Bookmark" and when I attempt to add the bookmark there I get this error message: "A problem occured while trying to save the bookmark. Please try again later."
Is this a comparability issue that you are not aware of? Below are the versions of Firefox and Yahoo Toolbar that I currently have installed:
Firefox: 6.0.02
Yahoo Toolbar: 2.4.0.20110815110908
Windows XP, Service Pack 3
I am having this issue on my laptop and desktop. Since I use both computers the Yahoo toolbar has been great for having my bookmarks available on both computers at the same time but no I don't have that feature. I'm told that Google's toolbar also doesn't work either.
Do you guys do any testing or Quality Assurance testing before releasing these versions?Add-ons are the responsibility of their authors. McAfee does not even put their extension on http://addons.mozilla.org you had to install it from their site.
Disable "McAfee Site Advisor" extension which was just updated to 3.4.0, which probably took it out of the addons block list.
* "Ctrl+Shift+A" > find McAfee Site Advisor and use "Disable", and then restart Firefox.
* Do a Google Search no problem
* It seems that if you re-enable Site Advisor again, and restart Firefox you are okay. At least you know where to look if you get the error again or Google searches slow down. -
when the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact,when the app in background ,the app need data update to make the function of trajectory replay come ture。in fact, we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode,we are confused,does anyone can help me,i still don't know why do review team can't find the data update when the app is in background and how do i modify the app,or what is the really problem they refered,do i misunderstand them?
the blow is the content of the review team email:
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.
Maybe you are looking for
-
ITunes library on one computer accessed by several
Hi can a iTunes library be kept on one mac, be accessed by three other macs and respond immediately? The systems would be hardwired. The various macs would be using only iTunes and Traktor only. The router would be a Netgear 4 port +wireless with a s
-
Hey all you Oracle experts, Hopefully simple question here surrounding Invoice printing and EDI. In our current setup we print most of our invoices on a daily basis, and the image generated through BI publisher gets archived successfully. We have rec
-
I have install AD and DNS, No DHCP on windows server 2008 r2. which has two NIC external and internal. Domain: mhpd.com Computer name: win2k8 External ip: 172.16.31.32/16 gw:172.16.0.1 dns:8.8.8.8 4.2.2.2 Internal: ip: 172.16.31.31/16 gw: blank
-
New to mac so don't know whats going on!Bought this macbook 2nd hand about 2-3 months ago.Its been running fine all this time,until about a week ago when the problem started.I get the so called beachball of death when doing the silliest of tasks,such
-
Selecting data from three tables
Hi Every one... I have three tables, Tbl_FlData, Tbl_Flsubdata,Tbl_OutDirection_Dtl, in these tables the common columns are OUTNO, OUTYEAR. When I am trying to pull data from two tables Tbl_Fldata, Tbl_OutDirection_Dtl by using below query I am getti