Missing jspc.bat file

Hi
I have installed tomcat 5. But i am not able to find jspc.bat file in the /bin directory.
Please any one can tell me where can i get this utility to compile jsp program.
Thanking you.

Tomcat 5.0 uses ant to precompile JSP pages:
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/jasper-howto.html

Similar Messages

  • Missing xlStartServer.bat file from Xellerate\bin folder in OIM 9.1.0.1

    I have installed OIM9.1.0.1 with JBoss 4.2.3 as application server and Oracle10g as database on Windows 2003 Server m/c.
    The installation process was successful and no error occurred in due course.
    And now to start OIM, I need to run the xlStartServer.bat from <OIM_HOME>/xellerate/bin.
    The problem is that this server start up file is missing in that folder.
    I tried installing with a differnt copy of installables as well, but the problem is still there.
    Could you please provide any pointers regarding this issue.

    I had tried starting the Jboss server and then starting the OIM.
    But although Jboss started successfully, for starting OIM server console, i had typed http:\\localhost:8080\xlWebpp ,
    but it could not find the application xlWebApp.

  • V12 migration.bat file missing

    Hello,
    I have two physical Win2K3 servers. One with xMII V12.0.2 plus NW 7 and the other with V11.5.1 . Each xMII version is running fine.  I have downloaded the latest version of the migration tool (XMIIMIGRATION03_0-10004466.SCA.zip) to the V11.5 server.  It is indeed a zip file. I unzipped it to a folder on the desktop and it contained three folders (BUILDARCHIVES, DEPLOYARCHIVES & META-INF).  The SAP Note # 1024626 states there is a migration.bat file to double click.  I don't see a .bat file.
    I am logged in as Administrator on the Win2K3 server with V11.5.1.
    Thanks for any help.
    Chuck

    Chuck,
    Yes the SP3 version of the Migration Tool will only work with MII SP3.  This is due to the fact that some fixes in the Migration Tool required some changes on the MII side as well.  You can deploy the SP3 migration .sca file  before you upgrade to MII SP3 but you just cannot run the migration tool with MII SP2.
    Just a FYI MII SP3 needs Netweaver SP14 so make sure you have the correct service pack before you upgrade to SP3.  Look at the installation guide and release note as well on how to install it as the JCO dll's need to be removed as they now come standard in SP14.
    Regards,
    Erik

  • Running a Bat file from a stored procedure

    This is part II of Re: Need to run bat file from application express
    I thought I would open a new thread
    I thought I had this fiqured out but it still doesn't work
    1) I granted CREATE EXTERNAL JOB to my user
    2) startup the OracleJobScheduler Service
    3)
    create or replace
    PROCEDURE RUN_OS_COMMAND(p_cmd IN varchar2)
    is
    v_job_exists pls_integer:=0;
    begin
      select count(1)
      into  v_job_exists
      from  all_scheduler_jobs
      where job_name='JAVA_EXE';
      if v_job_exists>0 then 
        dbms_scheduler.drop_job(job_name =>'JAVA_EXE');
      end if;
      dbms_scheduler.create_job
      (   job_name          =>'JAVA_EXE'
        , job_action        =>p_cmd
        , job_type          =>'executable'
        , enabled           =>false
        , auto_drop         =>false
        , start_date        =>systimestamp
      dbms_scheduler.run_job(job_name =>'JAVA_EXE');
    end;test.bat is del test.csv
    I run this
    begin
      RUN_OS_COMMAND('C:\temp\test.bat');
    end;
    / anonymous block completed
    It runs with no errors but does not run the bat file... what am i missing, thanks Doug

    LLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\wblincoe\Application Data
    CLASSPATH=.;[ORACLE_HOME]\jdbc\lib\ojdbc6.jar;c:\myjar\xdocore.jar;c:\myjar\i18nAPI_v3.jar;c:\myjar\xdoparser.jar;c:\myjar\xmlparserv2.jar
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=WBLINCOELT
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
    FP_NO_HOST_CHECK=NO
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\wblincoe
    LDMS_LOCAL_DIR=C:\Program Files\LANDesk\LDClient\Data
    LOGONSERVER=\\03N-DAYT-DC01
    NUMBER_OF_PROCESSORS=2
    OS=Windows_NT
    Path=C:\OraHome_1\jre\1.4.2\bin\client;C:\OraHome_1\jre\1.4.2\bin;C:\app\wblincoe\product\11.1.0\db_1\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PERL5LIB=C:\oracle\product\10.2.0\http_1\sysman\admin\scripts;C:\oracle\product\10.2.0\http_1\perl\site\5.6.1\lib;C:\oracle\product\10.2.0\http_1\perl\site\5.6.1;C:\oracle\product\10.2.0\http_1\perl\5.6.1\lib\MSWin32-x86;C:\oracle\product\10.2.0\http_1\perl\lib\5.6.1;C:\oracle\product\10.2.0\http_1\perl\lib\5.6.1\MSWin32-x86;
    PHPRC=C:\Program Files\PHP\
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f02
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    SESSIONNAME=Console
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\wblincoe\LOCALS~1\Temp
    TMP=C:\DOCUME~1\wblincoe\LOCALS~1\Temp
    USERDNSDOMAIN=CACI.COM
    USERDOMAIN=CACI
    USERNAME=wblincoe
    USERPROFILE=C:\Documents and Settings\wblincoe
    VSEDEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
    windir=C:\WINDOWS

  • Running bat files from JDeveloper

    hi
    Sometimes it could be convenient to run a bat file directly from JDeveloper.
    For example, the application in SQLAuthenticatorApp-v0.02.zip (see also forum thread "how to disable (or lock) users") has an Ant file BuildStuff/build-wlst.xml which has targets like "wlst.create-domain" and "create.wls-start-stop-bat-files", the last one resulting in some bat files which I have been able to configure to run from JDeveloper,
    see http://www.consideringred.com/files/oracle/img/2011/run-using-cmd-20110529.png
    The External Tool cmd configuration I use is shown in the screenshot
    at http://www.consideringred.com/files/oracle/img/2011/external-tool-cmd-20110529.png
    See also the blog post by John 'JB' Brock
    at http://blogs.oracle.com/jdevextensions/entry/how_to_extend_jdeveloper_without_writing_code
    - (q1) How can I configure the External Tool cmd to run in its own cmd (command) window outside JDeveloper?
    many thanks
    Jan Vervecken

    Hi Jan,
    It looks like this is going to be a bug from what I can see. After looking at it a little more this morning, not only does it not display the cmd window, but if you use the /k argument, it leaves the script running in memory. Look at your Task Manager after running a few times with /k
    I'll file a bug, and see if anyone has a work around or something that I missed.
    For now, it would appear this is not possible, and you will just have to see the result in the log window. I would not use /k as well. Stick with /c for now.
    Sorry for the inconvenience.
    --jb                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Help! problem running .bat files in browser

    HI! Hope you can help me!
    I have a simple applet that runs .bat files and retrieves the resulting information into a text box.
    To run those files I use:
    Runtime rt = Runtime.getRuntime();
    Process processo=rt.exec("C:/po2PrtMonitor.bat 04600105 ope >C:/infoPrt.txt");
    in wich "04600105","ope" and ">C:/infoPrt.txt" are parameters that the .bat file is expecting. When the file is ran it saves the resulting information on a simple .txt file, that I later read by using:
    fichResposta = new FileInputStream(fichRespostaPath[0]);
    When I run my applet on JDeveolper 9.0.2.822 is works perfectly, the problem is when run it on the browser.
    On the browser the applet executes the file by opening a MS-DOS prompt and when it finishes executing the file, the prompt closes automatically and doesn't send the information into the .txt file.
    My .bat file is something like:
    jre -cp PrtSrv20.jar sibs.deswin.prt.PrtMonGateway 10.46.1.22 5003 %1 %2 %3
    where %1,2%,3% are the above parameters given by the applet when the file is ran.
    If I run it on JDeveloper I get:
    C:\>jre -cp PrtSrv20.jar sibs.deswin.prt.PrtMonGateway 10.46.1.22 5003 04600105 ope
    PRTSES=04600105 HDR=0460010000000005 STA=OPENED TRF=ACTIVE TRP=CONN ILTS=15 Long postings are being truncated to ~1 kB at this time.

    Here is what is missing:
    ILT=0 MSQ=388 HDR=04.60.01.00.00.00.00.05.41.00.01.84. CMD=STRT-TRF
    When the applet is run on the IE broser what I get is simply:
    jre -cp PrtSrv20.jar sibs.deswin.prt.PrtMonGateway 10.46.1.22 5003 04601005 ope
    I have no idea as to what the problem might be! Do native methods work differently on the browser?! Could it be a problem on the deployment? A library not included on the deployment profile? Suggestions are very welcome.
    Hugo Rosas

  • Is it possible to execute .bat file located in package ?

    Hi,
    in my application i execute a print.bat file using Runtime.exec(), i'd like to place this .bat in package, let's say com.me.testpackage. How is it possible to execute the batch file from that location?
    thanks

    jschell wrote:
    sabre150 wrote:
    jschell wrote:
    >Simple 'for' loops seem to work OK but still more research needed.
    There is escaping in the for loops which is necessary in a bat file and not needed at the command line.
    It seem to be that any command spanning more than one line fails. Fail? The example that gave shouldn't fail. It should simply run both echos.As I understand it, the command sequence
    @echo off
    goto XXX
    echo out
    :XXX
    echo last
    should just output 'last' and not 'out so if it prints both 'out' and 'last' then in my view it 'fails'. Am I missing something?
    >
    >>
    Makes me even more pleased that I work mainly with Linux.Looking up syntax - what about getopts (bourne and korn)? You can also create 'functions', which can be defined later (if I recall correctly) in the script and called multiple times. I don't know how that would work streaming it in.I don't know about consequences of the streaming approach forward definitions in 'bourne' and 'korn' though I was not aware that 'bourne' allowed them. For 'bash' where forward definitions do not seem to be allowed (could I be mistaken in this?) then using        Process process = Runtime.getRuntime().exec("bash", null, new File(System.getProperty("user.home")));the following very simple 'bash' script (which contains loops, if statements and functions but no goto or forward definitions) can be executed without problems - # Simple bash script
    function sayHello {
        echo "Hello" $1
    sayHello "World" ;
    for i in $( ls /tmp ); do
        echo file - $i
    done
    for i in `seq 1 10`;
    do
        echo "seq" $i
    done
    i=0
    while [  $i -lt 6 ]; do
    if [ $i -eq 4 ]; then
        echo "then" $i
    else
        echo "else" $i
    fi
        let i=i+1
    done
    i=12
    until [  $i -lt 10 ]; do
    echo "until" $i
    let i-=1
    doneIn the past, I have also published examples of how to run Perl scripts using the same basic approach. The heart of the examples is         final String perlScript = "#!/bin/perl\n" +
                "print \"PID $$\\n\";\n" +
                "print \"UID $<\\n\";\n" +
                "print \"EUID $>\\n\";\n" +
                "print \"GID $(\\n\";\n" +
                "print \"\\nProcessing the command line arguments\\n\";\n" +
                "foreach (@ARGV) {\n" +
                "    $n = factorial($_);\n" +
                "    print \"    $_! = $n\\n\";\n" +
                "}\n" +
                "print \"\\n\".'@INC'.\"\\n\";\n" +
                "foreach (@INC) {\n" +
                "    print \"    $_\\n\";\n" +
                "}\n" +
                "print \"\\n\".'%ENV'.\"\\n\";\n" +
                "foreach (keys %ENV) {\n" +
                "    print \"    $_==$ENV{$_}\\n\";\n" +
                "}\n" +
                "$x = theAnswerToTheUltimateQuestion();\n" +
                "print \"\\nThe answer to the ultimate question is ... '$x'\\n\";\n" +
                "sub theAnswerToTheUltimateQuestion()\n" +
                "{\n" +
                "    return 3*2*7;\n" +
                "}\n" +
                "sub factorial()\n" +
                "{\n" +
                "    my ($n) = @_;\n" +
                "    return ($n > 1) ? $n * factorial($n-1) : 1;\n" +
                "}\n";
            System.out.println(perlScript);
             * The perl source can be from any InputStream. Here I use a
             * ByteArrayInputStream just as a demonstration.
            final InputStream perlSource = new ByteArrayInputStream(perlScript.getBytes());
             * The '-' indicates that the Perl script comes from stdin. The "a","b","c" etc
             * are the command line arguments passed to the Perl script.
            final String[] command =
                "perl", "-", "5", "6", "7", "8", "9", "10"
            final Process process = Runtime.getRuntime().exec(command);piping the 'perlSource' stream to the process stdin.
    This runs as expected on both Linux (FC9 and Ubuntu 8.04) and on Windows using Active Perl.
    Please don't take my use of a String to hold the Perl script to mean that I in any way endorse this approach - I just wanted a simple means to create a self-contained example.
    >
    And the c shell has a goto also.One day I might find some time and investigate 'c' shell goto in this context - since I have not used csh for at least 8 years I am very rusty.
    I can't say that the 'streaming' approach will work with all Linux shells but I can say that on Linux I have had no problem with Perl and Bash. If anyone needs to use the 'streaming' approach with another shell then it takes just a few minutes to setup a test harness. If any problems are found then people can always resort to the 'Plan B' approach.
    I am still pleased I work mainly with Linux and Unix.

  • Can only launch sqlDev 3.0 via .bat file

    I just downloaded 3.0 and extracted to a new folder. (winXP) The older version worked fine. Whenever I launch sqldeveloper.exe, I get " UNable to create an instance of the Java Virtual Machine"
    However, I am able to successfully launch when executing the sqldeveloper.bat file. AM I missing a configuration step?

    Make sure you're pointing to a 1.6 JDK in \sqldeveloper\bin\sqldeveloper.conf or delete the entry to get prompted to browse for it on next startup:
    SetJavaHome C:\Archivos de programa\Java\jdk1.6.0_16Hope that helps,
    K.

  • Problem executing .bat file from within Java class

    I'm stumped: I have no problem executing a .bat file that sets classpaths and executes a Java jar, but when I try to execute other executables first and then the .jar, my application hangs and since the DOS box doesn't come up over my GUI, I can't see what's going on.
    This works:
    public void execute() throws Exception {
    String s = "c:\\cs47auxs\\omnijar\\omni.bat";
    Process p = Runtime.getRuntime().exec("\"" + s + "\"");
    p.waitFor();
    JOptionPane.showMessageDialog(frame,
    "The Database Has Been Successfully Reloaded.",
    "Information Message",
    JOptionPane.INFORMATION_MESSAGE);
    Here's the .bat 'omni.bat'
    set JAVA_HOME=c:\j2sdk1.4.2_04\bin
    %JAVA_HOME%\java -jar C:\CS47AUXS\OMNILOADJAR\OmniLoad.jar
    This doesn't work:
    public void execute() throws Exception {
    String s = "c:\\cs47auxs\\omnijar\\jobomni.bat";
    Process p = Runtime.getRuntime().exec("\"" + s + "\"");
    p.waitFor();
    JOptionPane.showMessageDialog(frame,
    "The Database Has Been Successfully Reloaded.",
    "Information Message",
    JOptionPane.INFORMATION_MESSAGE);
    Here's the .bat file 'jobomni.bat'
    SET NETX_HOME=C:\CS47AUXS
    SET COBOL_HOME=C:\CS47AUXS\OFFLINE
    CD %NETX_HOME%
    CALL SET-NETX.CMD
    CD %COBOL_HOME%
    SSBPPC10 JOBOMNI X
    SET JH=C:\J2SDK1.4.2_04\BIN
    SET OMNI_HOME=C:\CS47AUXS\OMNILOADJAR
    CD %OMNI_HOME%
    %JH%\java -jar omniload.jar
    Can anyone shed some light here? Even when I execute the application from the command line the new DOS box doesn't become visible nor can I see any errors. If I could just get that visibility, I could probably figure out what is going wrong.

    Same problem with me as well.... Badly looking for a solution...
    I predict the following:
    - If your batch file has pretty less number of dos/shell commands then it gets executed fine with exec() and proc.waitFor();
    - If you increase the number of dos/shell commands in the bat file then try executing it then it definately hangs at proc.waitFor();
    Even "cmd.exe /C C:\\test.bat" hangs... if the commands are more...
    Is this some sort of bug? or am i doing anything wrong? I tried searching for solution on the net and search forums... but couldnt find a solution for the same.. not sure where i missed, what i missed...
    Incase some one finds a solution.. do post it here...
    Message was edited by:
    amadas

  • Calling .bat file from pl/sql

    I'm running Oracle 11g R2 on win7 system, and I would like to execute .bat file from a pl/sql block.
    I created a .bat file
    I have granted privs to an account:
    BEGIN
      SYS.DBMS_JAVA.GRANT_PERMISSION(grantee => 'COMMON', permission_type   => 'SYS:java.io.FilePermission', permission_name   => '<<ALL FILES>>', permission_action => 'execute',key => KEYNUM);
    END;
    DECLARE
    KEYNUM NUMBER;
    BEGIN
      SYS.DBMS_JAVA.GRANT_PERMISSION(grantee => 'COMMON',permission_type   => 'SYS:java.lang.RuntimePermission',permission_name   => 'writeFileDescriptor',permission_action => '*',key => KEYNUM);
    END;
    DECLARE
    KEYNUM NUMBER;
    BEGIN
      SYS.DBMS_JAVA.GRANT_PERMISSION(grantee => 'COMMON',permission_type   => 'SYS:java.lang.RuntimePermission',permission_name   => 'readFileDescriptor',permission_action => '*' ,key => KEYNUM);
    END;
    DECLARE
    KEYNUM NUMBER;
    BEGIN
      SYS.DBMS_JAVA.GRANT_PERMISSION(grantee => 'COMMON',permission_type   => 'SYS:java.io.FilePermission',permission_name   => 'C:\dokumentacija\rman_backup\*',permission_action => 'read,write',key => KEYNUM);
    END;
    DECLARE
    KEYNUM NUMBER;
    BEGIN
      SYS.DBMS_JAVA.GRANT_PERMISSION(grantee => 'COMMON',permission_type   => 'SYS:java.io.FilePermission',permission_name   => 'C:\dokumentacija\rman_backup\*', permission_action => 'read',key => KEYNUM);
    END;
    DECLARE
    KEYNUM NUMBER;
    BEGIN
      SYS.DBMS_JAVA.GRANT_PERMISSION(grantee => 'COMMON', permission_type   => 'SYS:java.io.FilePermission', permission_name   => 'C:\windows\system32\*',permission_action => 'read',key   => KEYNUM);
    END;
    DECLARE
    KEYNUM NUMBER;
    BEGIN
      SYS.DBMS_JAVA.GRANT_PERMISSION(grantee=> 'COMMON',permission_type   => 'SYS:java.io.FilePermission',permission_name   => 'C:\windows\system32\*',permission_action => 'execute',key => KEYNUM);
    END;
    /this is Java:
    CREATE OR REPLACE PROCEDURE runoscommand(cmd IN VARCHAR2)
    AS LANGUAGE JAVA
    NAME 'Command.run(java.lang.String)';and this is how I call it:
    declare
    xx pls_integer;
    v_errm varchar2(400);
    begin
    xx:=0;
    xx:=archiver.fullBackup;
    dbms_output.put_line(xx);
    exception
        when others then
        v_errm:=substr(sqlerrm,1,400);
        dbms_output.put_line(v_errm);
    end;this is Java code:
    DROP JAVA SOURCE COMMON.COMMAND;
    CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED COMMON.COMMAND as import java.io.*;
    import java.util.*;
    public class Command{
    public static void run(String cmdText)
                         throws IOException, InterruptedException
      int rtn;
           Runtime rt = Runtime.getRuntime();
      Process prcs = rt.exec(cmdText);
      rtn =  prcs.waitFor();
    }I run this as a part of a package...
    function fullBackup return pls_integer as
    v_errm varchar2(200);
    begin
        runoscommand('C:\dokumentacija\rman_backup\bckp_level_0.bat');
        return 0;
    exception
        when others then
            v_errm:=substr(sqlerrm, 1,200);
            dbms_output.put_line(v_errm);
            return -1;
    end fullBackup;but..
    at the end, nothing happens..
    what I've been missing?

    846417 wrote:
    I changed my code in last xx minutes...OK, so you've removed all your exception handlers?
    so, now I'm calling to an exe file wich should appear at a desktop or processes list... but no..
    I gave all windows rights on that file, and also through dbms_java.grant_permission..
    but, nothing happened... not exception raised, no app. started...And no output from any DBMS_OUTPUT statement? Have you tried stepping through the code in your debugger?
    Justin

  • How to Execute a BAT file

    Hi,
    I have to  execute .bat file , for this i writen the code as below,  i tried with 3 FM's.
    but am unable to run bat file, missing anything ?
      *data : begin of i_command occurs 0,
            txt(255),
           end of i_command,
           rbuff(10).
    *CONCATENATE 'rename' 'hari.txt' 'kris.txt'
                  into  I_COMMAND-txt  SEPARATED BY SPACE.
    APPEND I_COMMAND.
    CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
               FILENAME = 'c:\ren.bat'
          TABLES
               DATA_TAB = I_COMMAND.
    CALL FUNCTION 'WS_EXECUTE'
          EXPORTING
               PROGRAM = 'c:\ren.bat'
          IMPORTING
               RBUFF   = RBUFF.
    *CALL FUNCTION 'GUI_EXEC'
          EXPORTING
           COMMAND  = 'CMD /C '
           PARAMETER = 'c:\ren.bat'.
    CALL FUNCTION 'GUI_RUN'
           EXPORTING
            COMMAND  = 'C:\ren.bat '.
    Thanks in advance,
    hari

    Hi,
    CALL METHOD cl_gui_frontend_services=>execute
      EXPORTING
        application            = 'cmd'
        parameter              = ' '   " here pass the required parameter
      EXCEPTIONS
        cntl_error             = 1
        error_no_gui           = 2
        bad_parameter          = 3
        file_not_found         = 4
        path_not_found         = 5
        file_extension_unknown = 6
        error_execute_failed   = 7
        synchronous_failed     = 8
        not_supported_by_gui   = 9
        OTHERS                 = 10.
    If useful, please reward
    Regards,
    Vijay

  • How to execute .bat file through java?

    I already create a batch file to pull & push file. Now, i want to execute this .bat file java.I got this example but it doesnt work. Did i missed something or do we have the better one?
    import java.lang.*;
    import java.io.*;
    public class Loadfile
    public static void main(String args[]) throws IOException
    Runtime load = Runtime.getRuntime();
    r.exec("C:\\pull.bat");
    }

    For Runtime,i'd change it to:
    Runtime load = Runtime.getRuntime();
            String cmd = "C:\\javaclass\\copytemp.bat";
            Process proc = load.exec(cmd.toString());Is it right? But still can't work.
    Here is the .bat file:
    @echo off
    c:
    cd "c:\Inetpub\ftproot\Debitin"
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo open localhost
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo Administrator
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo password
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo cd ftpScript
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo binary
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo lcd C:\
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo lcd "C:\Inetpub\ftproot\infile"
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo prompt n
    pause
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo mget *.txt::@rem >> C:\Inetpub\ftproot\Logrecord\pullscript.txt echo mdel *.*
    C:\Inetpub\ftproot\Logrecord\pullscript.txt echo byeftp.exe -s:C:\Inetpub\ftproot\Logrecord\pullscript.txt
    ::del C:\Inetpub\ftproot\Logrecord\pullscript.txt
    pause
    exit
    [\code]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Error message: Missing PDF maker files in Word 2007

    OK, I am beyond frustrated. I have had nothing but trouble with Windows Vista and Adobe Acrobat. Please help!!!
    What happens: first, the pdf addin for Word 2007 suddenly becomes disabled, for no apparent reason. Forget about trying to re-enable it through the Add-Ins menu, because Word tells me that the "connected state of Office Add-Ins registered in the HKEY_LOCAL_MACHINE cannot be changed". This is a problem for me, because I use a special font (Vietnamese) that sometimes gets corrupted when running pdf maker. The only consistent way I have found to avoid this problem is to run the pdf maker as "Quick PDF" and as far as I can see that option is only available through the pdf addin in Word, I have never been able to find it when I open the Acrobat program and create a pdf from there.
    Second problem: shortly after the pdf addin becomes disabled, my Acrobat program loses the ability to create pdfs altogether. I get the error message "Missing PDF maker files". Yes, I have tried repairing the installation and re-starting my computer per the instructions given. It doesn't fix the problem. I also tried looking in the Knowledge Database on this website, but it appears that the instructions they have to fix the problem there are for earlier versions of Word, not 2007, because my version of word does not look like the version of Word in their little videos.
    This is the second time this has happened. The first time I resolved the problem by a) re-installing Acrobat, which is a pain because it involves calling Adobe and wading through their customer service to get a new installation number, and b) paying a computer repair service to dig deep into the guts of my computer and convince it to change the Office Add-ins to allow the pdf addin again. It worked for about 6 months, and now I have the same problem again. For some reason Vista is spontaneously disabling Acrobat.
    I simply cannot deal with this every few months. We all know that Vista is a crappy program, but I run a business and I need a program that works with whatever crappy program Microsoft puts out. Please, can anyone give me suggestions about how to re-enable these functions when Vista disables them?
    Thanks in advance!
    Alycia

    for Office 2007, see if this Microsoft product will work for you
    http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en

  • In firefox 4 RC, some addons installed suddenly disappear, but checking the profile, some of the missing addons related files are still here, how to make the addons back?

    I use firefox 4 form beta 9 to RC (zh) now and there are also firefox 3.6 installed in computer. One day when I open Fx 4 RC, some (actually a lot but not all) of the adoons just disappear. When I check on about:addons page, some addons installed do not appear in the list.
    The addons '''REMAINED''' including:
    * addons I already used in Fx 3.6 (like webmail notifie , xmarks)
    * ''addons only can use in Fx 4'' (like Open Web Apps for Firefox).
    The addons '''DISAPPEARED''' including:
    * addons I already used in Fx 3.6 (like yoono)
    * '' addons installed when using Fx 4'' (like updatescanner, Thumbnail Zoom).
    But when I check the profile(by Help > Troubleshooting Information>Open Containing Folder) , some (not sure is it all) of the missing addons related files are still here [lucky], so any one know how to make the missing addons back?
    Some more details:
    * This happened when i use RC for already a few days and keep on even i restart Fx and windows.
    * The bookmarks, history, search engine and even themes and icon setting are still here. [ I only sync bookmarks but not history for both xmarks and firefox sync.]
    * This addons are really '''disappeared''' but not disable only!
    * This number of addons missed, as i remember, at least 30, should be more than that number bacause some of them are installed but in disable mode.
    * I try to install back one of the addons - Stylish, the installed code are still here.
    * It is nearly an impossible mission to install every missing addons again, as it really kill my time.

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar to do a compatibility check.

  • HELP:: Flash unable to open BAT file or PPT file

    HELP Please....
    I am using Flash MX.. my projector exe file doesnt seem to
    open/call
    "myppt.bat" file which calls a powerpoint (PPS) file after
    the animation is
    over. The bat file runs well when
    self executed but not from flash...
    I also installed the trial version of Flash 8 and seem to be
    having the same
    above problem.
    please help by providing a working solution.

    Use FlashJester JStart
    http://jstart.flashjester.com
    p.s Beware, a double posting is not seen too good..
    Regards
    FlashJester Support Team
    e. - [email protected]
    w. -
    http://www.flashjester.com
    There is a very fine line between "hobby" and
    "mental illness."

Maybe you are looking for