Missing lines in books

Downloaded Nineteen Minutes by Jodi Picoult as the first book for my wife. It appears to be missing the last line, or several lines on the pages. I can use portrait or landscape mode but miss lines in either. Am I missing something?

I have had the same problem in three books now in iBooks. It seems to be about one line in every 12 - 15 pages. I talked to support they said "that's just the way it is, must be a download problem." I noted I had not had the problem on the Kindle app... no response. It's a bug. Seem's iBook is VERY LOW on Apple's priority list

Similar Messages

Missing Line items for CO-PA "BAPi_ACC_DOCUMENT_POST"

Hi Every one,
I am facing a problem while posting the documents using the standard "BAPI_ACC_DOCUMENT_POST". Problem is, if I have a multiple line items to be posted, BAPI is posting only a part of them and throwing the other documents into error with an error message "Missing Line items for CO-PA" or "inconsistency between a document field and prof. segment number" .
Program is handling the errors in another internal table and displaying them on output report.
When we re-run the program with same parameters, it is posting the some part of the residue and throwing some documents into error. So to clear out all the documents I need to run the Program for multiple times.
Any one can help me out in solving this Problem.

Hello Prashanth ,
there are 2 structures I think you should fill
CRITERIA (ref structure BAPIACKEC9 )
VALUEFIELD( ref STRUCTURE BAPIACKEV9) in BAPi_ACC_DOCUMENT_POST
hope this helps...

2LIS_11_VAITM delta extraction missing line items

Group,
I'm having a bit of troubles with the 2LIS_11_VAITM extractor. We've been using this extractor for some time now to do daily delta loads and it seems to work fine 99% of the time, but recently we noticed a few orders here and there from the last 7 months that were missing line items. If a full repair load is done now on these orders, we are able to extract the missing line items. This seems to suggest that for some reason the R3 delta job is not processing these line items or not picking up changes to these line items when they occur. I've found a few notes that seem to apply, but wanted to know if anyone else had this problem before.
This extractor feeds into a custom ODS, but no records should be dropped since there are only straight mappings in the update rules and transfer rules and no start routines used.
Thanks for any help offered!

Hi,
I feel it would be better to check first for these records in PSA table. If the records are there in PSA but not there in ODS . Check the value for the field 0STORNO(ROCANCEL) in all those records.
IF the field ROCANCEL does not has value R or D , then you can think about REPAIR request.
For few more information on REPAIR search the forum.
With rgds,
Anil Kumar Sharma .P

Missing text in books on ipad

Missing text from books downloade at times on the iPad

Try closing the iBooks app. Press the home button to get to the home screen if you're not already there. Then double click the home button. Locate the iBooks icon at the bottom. Hold your finger down on it until a red minus appears. Tap the red minus. Press the home button to return to normal. Then relaunch iBooks.
If that fails, delete the books, then you can redownload them under the Purchased tab in "Store."

Boxes missing lines

Hi there
Today, all boxes I try and draw are missing lines. I must have accidentally clicked on something for this too happen, but I have no idea how to fix it.
Can someone please tell me how to make it so that there are all four borders on my boxes?
Thanks!

Thanks, Jim for your quick and helpful response - that was it!

Connect missing lines in image trace

I am teaching myself Illustrator and I came across the image trace feature in CS6. I am able to to copy my drawing and do the image trace feature, but I am having trouble connecting missing lines to do a color fill without selecting the background area.
Now, I may sound dumb, so please forgive me, but is there a way to connect missing lines using the image trace, or pen feature, that will allow me to select a specific area and do a color fill with selecting the background as well?

To upload an image, click on the camera icon in the toolbar for this forum.
The direct selection tool will select all points if you click on the object. But you can click on a single point, shift select other points or drag select. If there is another object below the object you want to edit, use the move tool and double click on the object to put in isolation mode. In that mode only that object is editable.(click the gray bar above to get out of isolation mode or press escape key)
When using the direct selection tool make sure there is not a plus side of the cursor, if there is that's the wrong tool. (just press the lowercase a on keyboard)
To join to end points(they must be end points and only two points are allowed at a time)
Use the direct selection tool (lowercase a)
Select one point
Hold shift and select second point
Object>Path>Join (ctrl-j on windows and cmd-j on mac) or if you have a two button mouse you can right click and choose join from the menu.

Photos missing from photo book

I have recently opened iPhoto and have gone to do another photo book/Project, and was just checking an older book I made and have noticed some photos are missing from the book/Project? They are also not in the Album with all the photos I used for the book? Does anyone have any idea where these could be? Could they have been removed from the iCloud? I do not remember deleting these images from iPhoto so is there any way of retreiving them from anywhere else?
Many thanks, Ian

and
Are they in an event anywhere?
What version of iPhoto and of the OS?
LN

Error message: Missing line item for CO-PA characteristic line 0000000001

Hello, when posting is being done in automatic we are getting the following error message RW621 : 'Missing line item for CO-PA characteristic line 0000000001' and the document is not being created. I've filled in correctly the cost center / profit center for the line items. Any idea on why i'm getting this message?

Hello Prashanth ,
there are 2 structures I think you should fill
CRITERIA (ref structure BAPIACKEC9 )
VALUEFIELD( ref STRUCTURE BAPIACKEV9) in BAPi_ACC_DOCUMENT_POST
hope this helps...

Can not set breakpoints due to missing line number attributes

Hi,
I am using Eclipse 3.0, Jboss to run my Java applications. Till yesterday I could set breakpoints and everything was working fine.
I didn't change any settings but it is not allowing me to set breakpoints anymore.
Error is:
Unable to install breakpoints due to missing line number attributes
I double checked the settings in window->preferences->compiler->classfiles
Add line number to class files is checked.
Is there anything else I can do?
Any help on this would be greatly appreciated.
Thanks
nmadhava

I'm facing the same problem (no line number information) on the following configuration:
Eclipse 3.1.1 SDK with WTP 1.0 feature, Weblogic 7.1, running on weblogic provided JVM: JDK 1.3.1_08
I have already done the following:
1/ Re-checking debug preferences in Eclipse and rebuild all projects in the workspace then redeploy via ANT.
2/ Building via ANT1.6.2 with all javac tasks set to debug="on" and redeploy
Breakpoint is located in code section residing in one of the workspace's projects. But I don't know weather 3rd-party jar resources have been compiled with debug enabled or not; I suppose however it does not matter as I do not try to debug 3rd-party code but ours.
Any suggestion appreciated.
Regards

Missing Lines when printing, scanning or copying HP Deskjet 3055A- need to use cartidge guarantee

I have a HP Deskjet 3055A and since I put a new HP cartidge my printing, scanning and copying miss some lines. In other words, some lines are printed and some are not. This only happens with the black cartidge and not when I print in other colours. I read the HP guidlines for " Streaks or Missing Lines in the Patterns or Bars on the Extended Self-test Report" and I follow the whole proceeding, including the cleaning of the ink cartidge and NOTHING HAS WORKED. As the cartidge was recently bought I want it to be replaced. That's what the garantee is for, isn't it?
So my question is how to proceed now?

Welcome to the forums chsl
I saw your post about your Deskjet 3055A now showing print quality issues since changing the ink cartridges. I understand you have done some troubleshooting however, I wanted to publicly post the guide I would recommend for the problem you're having.
If there are any steps you haven't attempted, please give them a try!
Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

2540 printing problem, missing lines when printing from iPad

Bought a new 2540 to use with iPad, printing direct from wireless direct to printer and missing lines, tried copying and everything is working/printing ok. It just appears to be when printing from iPad. I have tried powering down printer and rebooting but still the same.
Any help appreciated.

Hey , Welcome to the HP Support Forum. I see that you're having what sounds like AirPrint quality issues with your HP Deskjet 2540 All-in-One Printer. I would like to assist. Your 2540 is AirPrint compatible, but not all app content and file formats are AirPrint friendly. I recommend installing the HP ePrint app. (I'm assuming you don't have WiFi if you're a wireless direct user. If that's the case try and visit a public space with WiFi and install the app there. Once installed you can use it within a wireless direct setup). Let me know if this helps. Thanks for reaching out and have a great day!

Missing Line Items and '?' Symbols in some Reports

I have upgraded the patch level of my production server and patch level
list is given below
SAP_BASIS 640 0022 SAPKB64022
SAP_ABA 640 0022 SAPKA64022
ST-PI 003C_640 0001 SAPKITLPS1
PI_BASIS 2006_1_6400006 SAPKIPYL06
SAP_BW 350 0021 SAPKW35021
SAP_HR 500 0017 SAPKE50017
SAP_APPL 500 0019 SAPKH50019
PI 2004_1_5000004 SAPKIPZI64
problem is that whenever I run SAP FICO standard reports FL3N, FBL5N,
KB01, F.08 etc it generates the report correctly but when i am taking
print out of these reports it misses some line items and total value as
well screen shots are attached for information.
my second problem is that there are some garbage entries with
symbol '?' in SAP Menu and toolbars of some Reports. Screen shot is
also attached for your information.
i am facing lots of problem in executing my daily operations due to
these errors.
regards,
Majid Khan

Dear Subramanian,
I am facing the same problem in Development and Quality Assurance Server
Regards,
Majid Khan

Missing lines when printing

I installed my printer today then wrote a small letter. When I tried to print it out several lines were missing. I'm using the Libra office program which I've used before. Bellow is the message I wrote. When I print it where it says till May 17th the lines disappear then the word year it starts again at year I would like to then its gone again to e-mail address to then it disappears again. I put my name and address phone number and e-mail address but the street address is missing then the bottom line Could you please most of this line disappears also till appreciate it.
I've tried printing this a half dozen times and the same thing happens every time. I'm using the Libra Office program and Open Office program and it makes no difference. The lines disappear every time. I would appreciate any help you can give me. Thank you lee
I have solved the problem. I installed a new cartrage and it printed out the letter just fine.
Hello February 8th 2015
Last month I renewed my subscription to your news paper paying $13.59. It is suppose to run till May 17th this year. On Saturday I received the inclosed card offering a year of weekend service for $9.88 a year. I would like to have my subscription changed to the year offer and receive a refund on the amount paid. Can this be done. If there is a problem please let me know. I am including my e-mail address to make it easier for you to contact me. Here is my information for my account.
Lee Jones
[Personal Information Removed]
Could you please let me know when you change the account over to the year long service I would appreciate it.
Sincerely,
This question was solved.
View Solution.

Hello @redrabbitt ,
Welcome to the HP forum.
I understand that lines of text are missing from your print out.
I would like to help.
Try running the HP Print and Scan Doctor.
Also, it could be a print quality issue. do any of the lines fade?
Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310)
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Missing lines/bars in a chart

Hi,
just another little problem.
Let's assume that i have a column chart, and a series of simples values: 3, 5, 7, 2, 9, 2, 1.
Now, let's assume that my vertical axis have a minimum value of 0 and a maximum of 6: i mean, it shows the Y values from 0 to 6.
The problem is that in this way i can see two "holes" in the chart, and it is for the column that have the 7 and 9 values.. the chart doesn't render them becouse their Y value is greater the the axis maximum.. how can i make it show them anyway? I'm developing a simple chart scrolling and i see that this happen with the column but with the lines too.. i'd need to see a bar/line drown till the end of the chart, even if it's end point is not in the visible part of the chart.
Thank you very very much,
Danilo

Thanks, but interpolateValues works if i have missing values.. i have another problem here.. i mean, i have all the values.. for example, i have this points:
A (1, 4)
B (2, 6)
C (3, 2)
D (4, 5)
Now imagine that i have my horizontal axis with the min showed value = 0 and the max = 3.. i will see the points from A to C.. but if i now drag the chart to the left, and i have min = 0.5 and max 3.5.. i can see the same points, and in the chart the line that goes from C to D is not drown, because the D point is not visible.. i can see the line from C to D only when, dragging, the X = 4 point appears in the horizontal axis.. but i want that line to be drown in any case, even if its end point is not in the graph (and the same with the bars).
I hope i've been clear, sorry for my english, and anyway thanks for the answer
Danilo

How to edit s.o. line after booking in Line Flow - Generic, Bill Only workflow?

Hi!
We are using Line Flow - Generic, Bill Only line workflow. Is it possible to edit s.o. lines after it has been booked? Is there any workaround for this?
Thanks.

Actually my question also applies to the other workflow, Line Flow - Generic-Bill Only with Inventory Interface... I am asking this for the possibility of manipulating the s.o. line's data like quantity or applying discount/surcharge to a already booked s.o. to be able to avoid creating rma for over-quantitied line, etc.
I am looking at creating a custom line workflow and somehow altering Close - Line subprocess that it is only performed once a certain condition is met. I believe that subprocess is the one that is closing the line. If that is kept not closed, maybe we can find a workaround for this requirement...
Thanks.

Missing lines in books

Similar Messages

Maybe you are looking for