2LIS_11_VAITM delta extraction missing line items

Group,
I'm having a bit of troubles with the 2LIS_11_VAITM extractor. We've been using this extractor for some time now to do daily delta loads and it seems to work fine 99% of the time, but recently we noticed a few orders here and there from the last 7 months that were missing line items. If a full repair load is done now on these orders, we are able to extract the missing line items. This seems to suggest that for some reason the R3 delta job is not processing these line items or not picking up changes to these line items when they occur. I've found a few notes that seem to apply, but wanted to know if anyone else had this problem before.
This extractor feeds into a custom ODS, but no records should be dropped since there are only straight mappings in the update rules and transfer rules and no start routines used.
Thanks for any help offered!

Hi,
I feel it would be better to check first for these records in PSA table. If the records are there in PSA but not there in ODS . Check the value for the field 0STORNO(ROCANCEL) in all those records.
IF the field ROCANCEL does not has value R or D , then you can think about REPAIR request.
For few more information on REPAIR search the forum.
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • Missing Line items for CO-PA "BAPi_ACC_DOCUMENT_POST"

    Hi Every one,
    I am facing a problem while posting the documents using the standard "BAPI_ACC_DOCUMENT_POST". Problem is, if I have a multiple line items to be posted, BAPI is posting only a part of them and throwing the other documents into error with an error message "Missing Line items for CO-PA" or "inconsistency between a document field and prof. segment number" .
    Program is handling the errors in another internal table and displaying them on output report.
    When we re-run the program with same parameters, it is posting the some part of the residue and throwing some documents into error. So to clear out all the documents I need to run the Program for multiple times.
    Any one can help me out in solving this Problem.

    Hello Prashanth ,
    there are 2 structures I think you should fill
    CRITERIA (ref structure BAPIACKEC9 )
    VALUEFIELD( ref STRUCTURE  BAPIACKEV9) in  BAPi_ACC_DOCUMENT_POST
    hope this helps...

  • Error message: Missing line item for CO-PA characteristic line 0000000001

    Hello, when posting is being done in automatic we are getting the following error message RW621 : 'Missing line item for CO-PA characteristic line 0000000001' and the document is not being created. I've filled in correctly the cost center / profit center for the line items. Any idea on why i'm getting this message?

    Hello Prashanth ,
    there are 2 structures I think you should fill
    CRITERIA (ref structure BAPIACKEC9 )
    VALUEFIELD( ref STRUCTURE  BAPIACKEV9) in  BAPi_ACC_DOCUMENT_POST
    hope this helps...

  • Missing Line Items and '?' Symbols in some Reports

    I have upgraded the patch level of my production server and patch level
    list is given below
    SAP_BASIS 640 0022 SAPKB64022
    SAP_ABA 640 0022 SAPKA64022
    ST-PI 003C_640 0001 SAPKITLPS1
    PI_BASIS 2006_1_6400006 SAPKIPYL06
    SAP_BW 350 0021 SAPKW35021
    SAP_HR 500 0017 SAPKE50017
    SAP_APPL 500 0019 SAPKH50019
    PI 2004_1_5000004 SAPKIPZI64
    problem is that whenever I run SAP FICO standard reports FL3N, FBL5N,
    KB01, F.08 etc it generates the report correctly but when i am taking
    print out of these reports it misses some line items and total value as
    well screen shots are attached for information.
    my second problem is that there are some garbage entries with
    symbol '?' in SAP Menu and toolbars of some Reports. Screen shot is
    also attached for your information.
    i am facing lots of problem in executing my daily operations due to
    these errors.
    regards,
    Majid Khan

    Dear Subramanian,
    I am facing the same problem in Development and Quality Assurance Server
    Regards,
    Majid Khan

  • Transfer posting with clearing missing line item

    we create a customer FI invoice 300 USD for one customer A, reconcill. account is 1019500, we do fb05 transfer posting clearing, thus another account is temporary account :1015600, the clearing document type  is Z1,
    (40) Dr: 1015600 300 uSD
    (17)Cr:  customer A 300 USD
    in FBl3n for 1015600, we see line item 300 USD, in FBL3N for 1019500, we also see line item 300
    but in FBL5N for customer, we can't see document type Z1 and line item 300, why this happens
    my document type Z1 already set intercompany posting and customer account type allowed.
    I tried post incoming payment, also can't see line item, but for invoice, we can see line item.
    why clearing doc not appearing in customer line item?

    I choose all items,
    the funny thing is the invoice 300 USD is in cleared status, thus no open item,  but the customer balance is not correct, it should be 0, not 300 USD.
    why it is cleared , but bal is not zero and line item doesn't show this cleared doc?.

  • BAPI for extracting GL line items

    Hi could anyone help me with this one?
    I'm looking for a function module that can get the line items given the GL account.

    Hi Maple,
      Try out with the following BAPI's:
    BAPI_GL_ACC_GETDETAIL  : G/L Account Details
    BAPI_GL_ACC_GETLIST       : List of G/L Account for each company code
    Hope this will be helpful.
    Regards,
    A.Fahrudeen

  • Plant name missing in PO line item details (Delivery address tab)

    Hi
    We are facing issue with ECC PO migration to SRM SUS client due to missing line item delivery address field name. We have PI integration. Name exist in PO XML on ECC interface but not copied on to PO line delivery address details (ME23n)
    Impact:
    We have 3 way channel between SRM client --> ECC ---> to SRM SUS client.
    When we create PO in SRM it flows from SRM to ECC using Purchase order request_V1 sevice request. This part works PO get replicated successfully. But when this PO is pushed to SUS client we are facing error message : "Name details missing for the partner address" found from proxy debugging. Second part of PO migration from ECC to SUS is not working due to missing plant name details in ECC
    When I copy PO (with missing details) to new PO and manually enter the details, scenario works with out any issue.
    Please comment.
    Regards
    Prashanth K Saralaya

    Hi Prashant
      Did SRM--> ECC PO have address details updated properly. It seems the address did not get updated when the PO is coming from SRM to ECC and when you manually update it, it goes to SUS Perfectly.
    For Delivery address , Name field is mandatory and ECC PO has to have the Name updated in Delivery Address.....
    If ECC PO has Name field updated in delivery address tab, then check the XMLs between ECC and SUS whether XML has carried Name field to SUS or not
    Regards
    Virender Singh

  • GL Line items and Opening balance extraction

    Hi
    I would like to extract BSEG line item details into BI, and this I can achieve using the extractor 0FI_GL_4 (we are still using the old GL ledger). We need to have the WBS and Profit Center fields for this extractor, and this availble in the BSEG
    However, as we know this extractor does not bring in the opening balances.
    We need to have opening balances as well and this can be achieved using the extractor 0FI_GL_6. But this does not have the fields WBS and Profit Center. Can this totals extracor be enhanced to include these two fields or would this become a very big challenge? If it can be done what tables can be used to do the join.
    Thanks

    Hi Bal
    Check the link below if it answers your query.
    FI_GL Line items-Opening Balance
    Regards
    Anindya

  • Line item extract and delete query

    If you change the default view for a scenario and line-item detail has been entered,
    you should first extract the line-item detail and save it. Then delete the line-item
    detail from the scenario before changing the view. You must change the extracted
    line-item detail to match the new default view before loading it.
    The above is a reference from HFM-Admin guide.
    Could any one tell how to extract or delete line item??
    Thanx in Advance

    Dear Sree,
    Here my query is addition and deletion of line items in delivery suggestionable or not if not any alternate solution please............
    -->You can delete the line item in the delivery if PGI not done for that delivery,
    -->But system will not allow you the new item in the delivery,because as per the standard functionality system will copy the items from the sales order and this is advaisable also.
    -->So if you want to add new item add in the sales order then create delivery for that order.
    -->Still you want to add item at delivery ( for your business requirement) you need to do the item categroy determination for the deliveries through 0184 transaction.
    -->Redetermine the pricing at billing level for that item by maintaining proper copy control settings between delivery and billing at item level in VTFL transaction.
    Maintain pricing type field as B-Carry out new pricing
    Make sure that you done the pricing procedure detrmination with the combination of billing document pricing procedure in OVKK transaction.
    I hope this will help you,
    Regards,
    Murali.

  • FI line items up to the current date

    Hi all,
    I read the SAP note 485958 "BCT-FI:Extracting FI line items up to the current date" and I have some doubts here:
    1. After I've set parameter BWFIOVERLA to 'X' and extract delta at 6PM, will FI data that is changed before 6PM for example a gl entry at 5PM, goes into my delta extraction?
    2. What does BWFITIMBOR mean by having default value 02:00:00?
    3. Is this note applicable if my R3 PI release is at 2003_1_46C?
    Please advise.
    Thank you.
    Celeste

    Hi Celeste,
       Pls go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm
    Excerpts from this link regarding your doubt:
    BWFIOVERLA: The logic of this parameter prevents records with the previous day as their CPU date from still being in the update at the time of extraction.
    If X is set for this parameter, selection is made up to the previous day if the time limit is not reached.
    If <space> is set for this parameter, selection is made up to the day before the previous day if the time limit is not reached.
    BWFITIMBOR: This parameter designates 02.00 (2 A.M.) as the time limit for extraction. If this limit is not reached, the system uses a security interval of one day to determine the To-value of the selection. If extraction is started before 02:00 therefore, the selection takes place only up to the day before the extraction run.
    Hope it helps you!!!!
    Regards,
    Amit

  • Open AUC Line Items

    Hi
    My requirement is to upload the legacy open AUC line items into the new system. For this we are writing a ABAP program. I could find all the AUC line items in the Table ANEP. But my requirement is to extract only the open AUC line items and not all.
    Can any suggest the Table in which I could find the open AUC line items ?
    Requirement is critical and thank you in advance.
    Gemini

    My requirement is not to find whether the given AUC is deactivated or not. I would like to extract the line items which are open in all the AUCs for uploading this as cut over data into the new system.
    As I have mentioned in my question I could find all the line items (settled + not settled) of AUC in ANEP table, but I want to know  if there is any Table which stores only the unsettled AUC line items.
    Thank you
    Gemini

  • Is there any way to add PO no and  corresponding line item of PO in VL32N?

    Hello,
    The scenario is, we have created the IBD and deleted one of the line item and saved it.
    We went to VL32N and added the missing line item to IBD but PO number and corresponding item number of PO field of newly added line items are grayed out. We are not able to add PO number in VL32N screen.
    Is there any way to add PO number and corresponding line item of PO in VL32N screen of IBD? Our client does not want to create new IBD for same PO. He wants to add the line item in same IBD.
    Thanks,
    Milind
    Edited by: Csaba Szommer on Aug 27, 2011 4:52 PM

    Hello,
    This thread is pending since long time. No body has answered my question. Can any body suggest me?
    Thanks
    Milind

  • FDM_COLL01 (Cust Acct-Receivables) Open Bal FBL5N (Cust Line Item)

    I have a customer with open balance from FDM_COLL01 (Customer Acct - Process Receivables) 13,533.33. But FBL5N (Customer Line Item Display) has open item of 81,200. The AR data is sent to FSCM daily on batch jobs. What factors can contribute to the difference?
    Thanks in advance.
    Stephen

    I would check the line items.
    There will be missing line items, I would check them.
    Have you got any noted items, special GL items, items that were cleared in the future?
    Also have you activated Head Office display as per Enhancement Package 4 - that could be a reason as well.

  • 0FI_GL_14 or 0FI_GL_4 General Ledger Accounting Line Items

    Hello experts,
    we should extract the Line Items from General Ledger Accounting.
    There is a new datasource from SAP 0FI_GL_14 (General Ledger Accounting (New): Line Items of the Leading Ledger)
    I cant find it in our source system because I think we donu2019t have SAP Enhancement Package 3 for SAP ERP 6.0 yet.
    The question is, instead of this new datasource, can we use the old one 0FI_GL_4 (General Ledger: Direct Line Items ) if all necessary fields are available in extract structure.
    Do you have any idea or experiences ?
    Thanks.

    We donu2019t have ehp3, so i cant use 0FI_GL_14.
    Can we really compare 0FI_GL_14 and 0FI_GL_10  ?
    Because 0FI_GL_10 extracts not on document level but I need information (Work breakdown structure element(PROJK)) on document level.
    So I need both fields in extract structure u201CAccounting document number (BELNR)u201D and u201CWork breakdown structure element(PROJK)u201D.
    0FI_GL_10 contains none of them.

  • Profitability Analysis - Reposting of Line Items

    Hi Gurus,
    Can someone please explain to me what KE26 & KE21N is used for? I tried to get SAP documentation on it but I am not able to...the message i get is nothing exists for this....
    My understanding is it is for fixing / adding any missing line items / updating a document? Not sure... please can someone explain how it works, how it is used & how does this impact from a financial perspective?
    Best Regards,
    Noopers

    HI, ke21n is used to create a NEW CO-PA document. ke26 is used for changes (characteristics, posting date) for an existing CO-PA document based on a FI document number.
    BR Christian

Maybe you are looking for