Missing My Folder after copy catalog

Hi,
We need to migrate repository and webcat from test to prod. After i copied catalog to the specific folder in BI server and uploaded repository, i am able to see the reports under Shared Folder. But all the reports under My Folder are not shown. Does anyone know why? Thanks.

Hi guys,
I had a very similar problem: with Catalog manager we archived all catalog, then we tried to restore the catalog to recover some missing analysis.
In Catalog folder, under users folder i can see my files resotred (both file and .atr), but in Answer i loose "My Folders" for each users! i.e. in left panel i see only "Shared Folders".
In OBIPS log i can read:
"Account inconsistent -- no access to home dir- typically this occurs then a user has been deleted..."
But i haven't delete that user.
I tried also to create a new user, but still don't see "My Folders" for the new user.
Also this post didn't help: http://shivabizint.wordpress.com/2011/08/26/how-to-solve-obiee-11g-authentication-failure/
Any helps?
Thanks.
Roberto
Edited by: pnnrrt64 on 18-lug-2012 12.43

Similar Messages

Missing Library Folder after 10.9.4 update

I recently competed the 10.9.4 Update on my MacBook Pro, and have since lost access to the Library Folder. It used to be located on my computer in the following.
/Users/{User Name}/Library/Application Support/{Application}/{File Name}
Has anyone had success in retrieving this folder? I am able to still save content to this folder, however it is not there for me to access the folder.

Thanks benwiggy. I have just installed Illustrator CS6 and am working my way through the lessons and have not been able to locate the Preferences file until now ... have spent ages on the internet trying to find the solution. Many people were suggesting doing the "defaults write com.apple.finder AppleShowAllFiles YES" solution. I was a little nervous doing this so carried on looking. Eventually found your suggestion of "Go To Folder and type ~/Library" and it worked! MANY THANKS!
Btw I couldn't do it via the Show View Options and Show Library Folder - I wasn't able to see that option ....
Anyway, thanks.

Mail messages missing after copying to new folder

I am recovering some email messages and have imported the mbox into a new folder. It contains 8860 messages.
When I copy these messages to the inbox, about 750 messages do not copy over. There is no warning that the file copy is incomplete.
Also If I try to export the mailbox, not all of the mail message are exported.
It seems very difficult to find out what is causing the problem.
I had already rebuilt the mailbox before attempting to copy it to the inbox folder.
Anyone have any experience with mail messages going missing files after copying them to a new folder within mail?

I am recovering some email messages and have imported the mbox into a new folder. It contains 8860 messages.
When I copy these messages to the inbox, about 750 messages do not copy over. There is no warning that the file copy is incomplete.
Also If I try to export the mailbox, not all of the mail message are exported.
It seems very difficult to find out what is causing the problem.
I had already rebuilt the mailbox before attempting to copy it to the inbox folder.
Anyone have any experience with mail messages going missing files after copying them to a new folder within mail?

Can't open folder after failed copy

Hello,
I have a WD MyBookLive NAS drive which, up until Mavericks, I had been succesfully using as a Time Machine backup over WiFi. However after Mavericks it became unusable (This is well documented throughout this site and in other places - however there is no fix in sight).
Having given up on Time Machine for backup (and deleting it's backup archives in a failed attempt at troubleshooting) I went about manually copying my files to a share I had created specifically for this purpose on the NAS drive.
I did a test of about 5 Gb worth of files and all went OK, copying in about 5 minutes.
I then started to copy the rest of my data - about 750 Gb in all, mostly raw video and iMovie files. The copy began and proceeded as expected so I left it alone, However when I looked at it a few hours later it said that a copy had failed because the file "clip-135-02-05 05;27;15.dv" couldn't be read or written, with no option to either try again or skip over the offending file - it simply stopped the copy dead... Grrrr
When I checked the destination folder (after having to re-log in to it) with a Get Info it was 134Gb - so a lot of progress had been made in the copy.
HOWEVER, although I could do a "Get Info" on the destination folder, its icon is greyed out and I cannot open it. Worse yet I cannot delete it. When I tried to do so it deleted about 2/3rds of the content but stopped saying "The operation can’t be completed because the item “clip-135-02-05 05;27;15.dv” is in use."
I tried using "GraveYard" to delete it but it couldn't do it.
I'm now left with a 45Gb greyed out folder that I cannot open or delete...
Any Ideas??
Also, when I searched for "clip-135-02-05 05;27;15.dv" in the source folder, it came back with about 12 files - all seemingly legit, but in different folders - so I've no easy way of knowing which one of these may be the problem file (maybe none of them are, maybe the WiFi failed at a critical point while copying that file and corrupted the destination).
Either way it seems odd that a failure of ONE file during a copy could cause so much trouble...
Help!

Thanks Pierre-Yves
Update:
I was running 10.9.2 - in fact the reason I ended up with this manual copy problem was because I was hoping that 10.9.2 may have fixed the Time Machine problem I mentioned above, but it didn't!
Continuing from where I left off after the failure above...
I thought I'd skip WiFi and use a direct ethernet cable to my router for a more reliable connection. I hooked it up, disabled WiFi and began the copy again from the start. (Copy speed was pretty much the same as with WiFi - I guess this is as fast as my NAS can handle things). The time estimation got to 17 hrs so I left it overnight. The next day it was still going with no apparent problems.
It got to about 620Gb out of the roughly 750Gb BUT then stopped again. This time the error was different:
"The operation can’t be completed because you don’t have permission to access some of the items."
...and again, frustratingly, no other option but to click "OK". Further, it gave no indication of the problematic file.
However, at least this time I could open and examine the contents of the destination folder to see what was and wasn't copied. By doing a few "Get Info"s on the various folders and comparing sizes and file counts I was eventually able to identify which files and folders didn't make it. (Oddly it was a selection from roughly the middle of the original folder list - sorted alphabetically, I thought it would have been at the end).
I started to copy the missing items, fully expecting to come across a permissions error at some point. However I didn't and was able to complete my "backup". When I compared "Get Info"s on the source and destination folders they showed the same number of items and roughly the same no of bytes - Good enough for me.
So, for now, my immeadiate problem of not being able to make a backup has gone away.
Nonetheless, my experience with this (and the well documented Time Machine problems) leaves me doubting OSx reliability (how can there be problems with permissions during one copy attempt but not the next?) and user friendliness. I'm not a Windows fan by any stretch, but at least when Windows has a problem copying it tells you which file it had the problem with and offers you to skip over it and continue with the copy. With OSx, it's all or nothing with no remedies and often no meaningful fault indication... Very frustrating...
One last thing: I had mentioned in my first post that I had been left with a Greyed out image of a 45Gb folder that wouldn't delete. I tried again today and, although it was still grey, it did actually delete - so at least that somehow fixed itself...
Thanks for your input.
I await the next OS update to see if things improve...

How to find the folder (EBS_R12) in OEL 5 after copy/paste from Windows 7 ?

Folks,
Hello. I have just installed Oracle Linux 5 as Guest OS on the top of VMPlayer. Host OS is Windows 7.
I downloaded Oracle E-Business Suite R12 from edelivery into Windows 7 in a folder(EBS_R12) on my LapTop screen.
In order to install EBS R12 into Oracle Linux 5, I copy/paste the folder EBS_R12 into Oracle Linux 5 screen. The file size is about 50GB. After coply/paste is completed successfully, I cannot find where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.
Can any folks tell me where is the folder (EBS_R12) in Oracle Linux 5 after copy/paste from Windows 7 ?

Hi,
After coply/paste is completed successfully, I cannot find where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.Was the copy/paste successful.
If yes then you can do the following
#find / -name EBS_R12 -type d -print
(Assuming you copied the folder "EBS_R12" , But not its contents).
Thanks

Missing folder after installing myapplication with AppBuilder 8.5

In the project property for the installer, I created a data-folder for my application. This folder is for later use with the myapp. So during installation its empty.
After installation on the target PC, I miss the folder. Only the folder with the myapp has been created.
My system: LV8.5 full, AppBuilder on winXP SP2
Any idea?
Andreas

The installer builder does not support creating an empty folder. It's a feature that's been requested for a while, and we'd like to add it, but it has not been a high priority feature. The workaround is to install a dummy file (0 bytes) to the folder. Or you could configure the installer to run a batch file that creates an empty folder. The downside to using the batch file, however, is that the uninstaller won't know to remove the folder.

Missing email and folder after Move Mailbox

We are using Exchange 2007 SP3 and Exchange 2010 SP2 with RU6.
I just start migrate the user from Exchange 2007 to 2010.
by New-MoveRequest -identity user - targetDatabase
1 user compliant he miss many folder and email
IN the Exchange Move Request Log said Complete and
in the Request Log, the Regular items is 12615 and 4.129 GB
but in lower part, only see 92950 messages and 2.52 GB had been complete.
Any Ideas? not all folder, just some folder, is that Folder limitation or my powershell not correcT?
Now, in Exchange 2007, I cannot see his mailbox in disconnect mailbox, so I need to restore from Backup as well.

Would be curious to hear what MS says about this, however that said to recover whats missing you would need to recover that DB to RSG and then either use a 3rd party tool to access the offline copy of the DB, or use the RSG method to recovery to a temp
mailbox on 2007 and then export to PST and compare with the migrated mailbox.
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

How do you move one (1) Photo Folder from one Catalog to another Catalog in Lightroom 5?

I want to move one (1) Photo Folder from one Catalog to another Catalog in Lightroom 5 and my laptop (no external hard drive involved). I have already started the editing process in Catalog #1, but due to the size of the Catalog #1, I want to move the current job and future work to a new Catalog.
Currently the backup feature takes an hour to complete. There are also significant delays during large image edits.    So I am thinking, that by moving over to a smaller Catalog, Lightroom will work faster.

Hello ... and thanks for your response.   But I have discovered a couple problems. And I am sure it is "operator error"
I used your method #1. The first window that popped up stated that it was making a temporary copy of the catalog. This took about 20 minutes.
Next, the window showed thumbnail photos on the right and a list of folders in my catalog on the left. The catalog contains folders stored on my LapTop, as well as my external hard drive.
There appeared to be a distinctive difference between those photo folders stored on the external hard drive and those on my LapTop.   The folders on the external drive were named as I have all my folders named: Date_CustomName. The folders stored on my LapTop were named as: Lightroom_5 Backup_Date_CustomName or some such combination and my memory is foggy on the actual use of underscore, slash marks, dashes, etc.
I searched the list closely, and the Folders without a reference to "Lightroom Backup" were not showing.
So as a test, I "added" to the new Catalog one folder from the external hard drive and two from the LapTop.   After the transfer, the new Catalog had accurately named my external hard drive and the folder within in and the photos and their edits transferred accurately.   The other two folders were not named but listed shown in the library module as grey boxes as images with indications of editing. But when I clicked on it, there was a notation that popped up that the file could not be found.
Any ideas?
I am going to create a second new catalog and try your option #2 now.
Thanks

RMAN restore after using catalog command

Hi:
I am on 10.2.0.3; hp-ux B.11.23 ia64.
I need to restore 2 weeks-old RMAN backup into a different database. RMAN runs at 11:00 pm each night.
Here are the steps I've taken:
1. Copied all backuppieces from tape into RMAN backup location where my RMAN process puts them (do I have to copy something else beside pieces?
I do full backup - BACKUP as compressed backupset DATABASE plus archivelog;)
2. Ran "catalog backuppiece" on every backuppiece.
3. Ran list backup to see that this backup from tape has been registered in the catalog and has "AVAILABLE" status.
4. Startup nomount on NEWDB.
5.rman sys/passwd@ORIGINALDB.
6. Ran my duplicate script (below is an extarct):
run {
connect catalog rman/passwd@RECCAT;
connect auxiliary /
set newname for datafile 1 to '/db/data2/NEWDB/system01.dbf';
set newname for datafile 2 to '/db/data2/NEWDB/undotbs01.dbf';
allocate auxiliary channel c1 type disk;
set until time "to_date('28-08-2008 22:30:00','dd-mm-yyyy hh24:mi:ss')";
duplicate target database to NEWDB
logfile
group 1 ('/db/data1/NEWDB/redo01.log','/db/data6/NEWDB/redo01_2.log') size 100M reuse,
Here is the error I am getting:
executing command: SET NEWNAME
executing command: SET NEWNAME
allocated channel: c1
channel c1: sid=333 devtype=DISK
executing command: SET until clause
Starting Duplicate Db at 10-SEP-08
datafile 1 not processed because file is offline
datafile 2 not processed because file is offline
Am I missing something?
Maybe that - my RMAN runs at 11pm so I am trying to set time at 10:30pm?
TIA.

Hi Hemant:
Are you sure that you are connecting to the right instance as your >AUXILIARY ?
normally it would be
connect target /
connect catalog rman/passd@RECCAT
connect auxiliary sys/sys@NEWDBYes I am, RMAN sends a confirmation message: "connected to auxiliary NEWDB (not mounted).
I did this many times with my RMAN backup still online. The question is that now, when I brought 2-weeks old rman backup from tape, duplication does not work although RMAN lists this old backup as available after I cataloged every backup piece...Is this all I need to catalog? I don't think controlfile snapshot matters.
Anyone actually tried that? Bring old backup from tape (I do backupset), catalog it, then duplicate it into a new database? All comments greatly appreciated!

My playlist didn't show up on new laptop after copying from the old laptop

What can I do when my playlists didn't show up on new laptop after copying from the old one?

abombaci wrote:
I just simply copy only the whole iTunes music folder to my external hard drive, that's it and it goes good. That way if you just copy the whole iTunes folder it also carries along with it all it's subfolders. If subfolders aren't carried over you may end up with a library with missing album arwork. Album artwork, iTunes media folder, itunes previous libraries, itunes XML folders etc., etc. You get the picture.
Yes.
This is much better way than changing the media folder location.
Keep everything in the same iTunes folder.
However, when I do it this simple way as compared to the Apple way it doesn't save my play counts or ratings.
Since it is exactly the same library, everything should be the same.
Then just go to external drive click on iTunes folder and then in iTunes add folder to library and all your songs load up. This isn't moving the library but just backing it up.
You don't need to add anything.
Hold Option and launch iTunes.
Select Choose library... and select the iTunes folder you copied to the external.
You can delete then /Music/iTunes/ folder as this same folder was copied to the external and this is now your iTunes library.
You can also do this top make a backup of the iTunes library (thoug you should be making a backup (Time Machine or some other backup program) of yoru entire computer.

Missing album art after moving library

Hi,
I had to move my iTunes library to my new computer. The music files were then place on the H:-drive instead of the D:-drive. I also copied the iTunes folder from my old computer over to my new compuer's My Music folder - just as it was located on my old computer.
iTunes had no problem locating the music files, but it appears that all the album art is missing. I have checked that my Album Artwork folder is copied as well.
Is there any quickfix to this, or do I have to reload all the album artwork? There were quite a few albums for which I had located the art manually (not using iTunes) so it's a shame if it's all lost
Any help is appreciated.
thanks and regards,
Svein-Helge Lea

It's solved !!
It was really silly of me not to see this immediately. On my old computer I had the small album art window showing "selected item", but after moving to my new computer it showed "Now playing". And last night I wasn't playing, hence nothing showed up there.
Now evertything is okay and in place.
Thanks anyway.
S-H

The Finder is not refreshing the icon thumbnail after copying

The Finder is not refreshing the icon thumbnail after copying.
I tried copying a couple of foders from the internal HD to a USB drive and the resulting icons kept an empty progress...
WHY????

Hello,
It looks like possibly a Permissions problem... the X above the folder.
In Finder do a Get Info on that drive, or the folders on that drive that you're trying to copy to.
Úgy néz ki, mint esetleg egy Engedélyek probléma ... X felett a mappát.
A kereső nem egy Get Info a meghajtón, vagy a mappákat a meghajtón, hogy akarsz másolni.

HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point.

Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

Moving a library: Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive. Hold down the option (alt) key (shift on Windows) and open iTunes. At the prompt to create or choose a library choose the copied iTunes folder.

How to copy catalog from external hard drive to computer hard drive to use smart previews when not connected to external hard drive?

I am very new to LR5. I have LR5 set up so that my catalog and photos are on an external hard drive. I found out that when not connected to the hard drive, LR5 cannot find my catalog, therefore, I cannot do any editing in smart previews unless connected to the external hard drive. How can I fix this issue so that I can edit photos without being connected to the external hard drive. Is there a way of copying the catalog off the hard drive on the computer hard drive or do I need to reestablish a new catalog using LR5? Does the catalog always need to be loaded on the hard drive? Thank you in advance.

Yes that is correct. The LR catalog must be on the computers internal drive. Then when you have Smart Previews enabled you can edit image without having the drive they are on connected. Then when you connect that drive the images will be updated.
Just COPY those 4 folders over to your internal drive to a folder called Lightroom Catalog that you create. Then Open LR and go to the File menu item and select Open Catalog. Browse to the folder you created called Lightroom Catalog and select the Lightroom 5 Catalog.lrcat file and click Open. Once Lightroom restarts open the preferences, Edit>Preferences, and on the General Tab in the Default Catalog section make sure "When starting up use this catalog:" area lists where you have copied those folders. Something like Macintosh HD/Wherever you created that folder/That folder name/Lightroom 5 catalog.lrcat.

Sent messages only appear in the sent folder after restarting Thunderbird

Hi, my problem is that sent messages do not appear in the sent folder unless I restart Thunderbird. I have the sent 'copies' box de-checked as if not although it syncs I end up with two copies (of sent messages).
I am using Thunderbird 31.2.0 on OSX Yosemite connecting via IMAP to ZOHO mail with STARTTLS on 587 for SMTP.
Hope you can advise, I've tried SSL/TLS on 465 also and it is the same. It's a bit of an inconvenience not being able to view the sent messages.
Many thanks

Interesting to know (the RFC violation) but as you say, perhaps not relevant as such, although if ZOHO wasn't auto-placing a copy in sent then I could check the 'place a copy in' option and it would work ok.
Anyhow, I tried your recommendations and yes, I use both an Android and an iPad to also check my mail but with both disconnected from Wi-Fi the problem still persists. There are a few warnings being reported in the TB error console on the Mac but they just relate to 'mso-table-lspace' for my INBOX.
And for info in Thunderbird on my Ubuntu laptop the problem is exactly the same -
'Place a copy' checked - Messages instantly appear in the sent folder but there are two copies.
'Place a copy' de-checked/Cached connections = 5 - Messages only appear in the sent folder after restarting Thunderbird
'Place a copy' de-checked/Cached connections = 1 - Messages appear in the sent folder on clicking out of the folder and back in.
On Ubuntu there is nothing at all in the error console.
I can work with how things are at this stage as I don't live in the sent folder (rather the inbox), and when you click into it (with the connections cache at 1) the messages do appear, so I suppose that's actually ok.

Missing My Folder after copy catalog

Similar Messages

Maybe you are looking for