Missing $$ORACLE_HOME/jsp/demo/README file

I have installed OAS9i standard edition and I am trying to run the sample EJB calling EJB from the OracleJSP Demo. The decription says:
This sample isllustrates how to invoke an EJB
object in JSP. It assumes /test/employeeBean is already deployed and published in your Oracle8i Jserver. To do that, refer to $ORACLE_HOME/jsp/demo/README for the steps.
I was not able to locate the README file in the above mentioned directory. Is it somewhere else?
Thanks
null

Look in demo.zip...
Mine is located in:
D:\iSuites\jsp\demo\demo.zip
-=< Nick >=-
null

Similar Messages

Jsp demo under iAS

I have been trying to test the sample jsps that came with iAS on Solaris 8.
(scottRoot context is already set)
The make command (in $ORACLE_HOME/jsp/demo) seem to work for a while then gives the following message
java.io.EOFException: Premature EOF encountered
*** Error code 1
make: Fatal error: Command failed for target `compile1'
Is this a problem of memory or CLASSPATH setting ?
Any help is appreciated.
null

Andre,
I have found the answer to my problem and perhaps yours. It seems that I18N (internationalization) in SP4 may have a performance bug in it.
My soak tests show that with i18N checked in the iAS Admin Tool, testing the fortune cookie sample application with light load (1 request / sec) resulted in a kxs response time initially of 15ms, however this response time increased by roughly 1% per request (i.e after 100 requests the response time had more than doubled).
Switching I18N off yielded a steady 7ms kxs response time from the fortune cookie application.
I would add that I turned I18N on AFTER the installation procedure.
Is this a known issue in SP4? Is there a patch?
regards,
Owen

[svn:osmf:] 13000: Adding the missing readme file for the captioning sample app.

Revision: 13000
Revision: 13000
Author:   [email protected]
Date:     2009-12-16 10:36:36 -0800 (Wed, 16 Dec 2009)
Log Message:
Adding the missing readme file for the captioning sample app.
Added Paths:
    osmf/trunk/apps/samples/plugins/CaptioningSample/readme.txt

Carey,
I have tried london1a1's workaround, and it has not made any difference.
It seems that london1a1 suggests changing the Camera.h file in this location:
          Users/london1a1/Documents/DW_NAF/PhoneGapLib/PhoneGapLib/Classes/Camera.h
Whereas you're saying to change the Camera.h file in this location:
          /Applications/Adobe Dreamweaver CS5.5/Configuration/NativeAppFramework/DWPhoneGap/iphone/PhoneGapLib/Classes/Camera.h
I've tried changing the Camera.h file in both locations. Neither has made a difference.

[svn:osmf:] 13570: Fix bug FM-310: Metadata video sample app missing readme file.

Revision: 13570
Revision: 13570
Author:   [email protected]
Date:     2010-01-18 09:44:00 -0800 (Mon, 18 Jan 2010)
Log Message:
Fix bug FM-310: Metadata video sample app missing readme file.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-310
Modified Paths:
    osmf/trunk/apps/samples/framework/MetadataVideoSample/MainWindow.as
Added Paths:
    osmf/trunk/apps/samples/framework/MetadataVideoSample/readme.txt

How to convert JSP Compiled class file back to JSP

Is their any way to convert the JSP converted class file back into JSP file, I have few JSP files missing in my application but i do have class files deployed corresponding to the JSP file. Is their any way where i can convert my JSP class file back to JSP. I tried used decompliers but it conerts the class file into JAVA files, Is their any such decompiler that converts the JSP converted class file into Java files.
Thanks in Advance.

nope...its not et al possible...!!!
You cant convert class file back to JSP....!!

Fusion Order Demo zip file which works with JDeveloper 11.1.1.3.0

Hi,
Please can anyone tell me where to find the Fusion Order Demo zip file that will work with JDeveloper 11.1.1.3.0 (latest version 13/5/10).
I have downloade OracleXE 10g for Windows on my laptop and now want to create the Fusion Schemas (Tables/Schemas/Procedures etc) for the Demos.
I have downloaded FOD_11.zip, FusionOrderDemo_R1.zip and tryed the instructiion for running Fusion Order Demo here http://www.oracle.com/technology/documentation/jdev.html but each time I get the error
"oracle.javacache_11.1.1 not found"
How can I fix this?
I want to learn Jdeveloper works and use it for Logical and Physical Schema mapping....
Thanks
BP

Hey John,
Thanks for the quick reply, and yes sir, I did follow those instructions.
Let me describe what all I have done so far, maybe someone can figure out where I need to fix anything:
I installed JDeveloper version 11.1.1.3.0, which came with its own WebLogic server, on my windows xp professional OS on my laptop.
I then downloaded the zip file, FusionOrderDemo_R1PS2.zip.
I encountered a problem while unzipping the file, where it was asking me some password for a few files, but Lynn from Oracle helped me figure that out....i had to use 7-zip utility to uninstall....windows default built-in unzip utility does not work.
After unzipping all files, I followed the instructions given on http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html to import, build and run the application....
And now when it runs....it just open my browser window (IE 7), and shows a "loading..." image in the center of the page....nothing happens after that.
Any idea what might be missing?
a few major errors I see in the wls log window of jdeveloper are:
1) <DCBindingContainer><reportException> [3952] oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.sql.SQLDataException, msg=ORA-01882: timezone region not found
2) <DCBindingContainer><reportException> [3958] oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
3) <UIXInclude><tearDownVisitingContext> Tear down of include component context failed due to an unhandled exception.java.util.NoSuchElementException
Please help!
Regards,
Hemant

I download my acrobat x upgrade but I only get readme files on my mac

but I only get readme files on my mac

I assume you went to http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Macintosh. Each update has 2 steps to download and the download should then be automatic. Generally, the updates must be installed in order unless indicated otherwise. However, the downloads should be installation files (not sure about the extension or type for a MAC) and not a text or readme file. I found 2 pages, each with a download button for the downloads. The last one should start the download as I mentioned. If the MAC version of Acrobat is similar to Windows in the update sense, you may be able to do updates from the Help menu within Acrobat.

Moving default location of JSP demo

As you know that the default location of JSP demo for 9iAS is located at ~/Apache/Apache/htdocs/demo and I have successfully changed the doc root to ~/docs and served our locally created Web apps in that directory. But when I moved demo into ~/docs/demo and trying the demo apps such as lottery, I got error:
oracle.jsp.parse.JspParseException: Line # 7,
Error: Unable to find class for bean: picker defined by tag with class: oracle.jsp.sample.lottery.LottoPicker
     at java.lang.Throwable.fillInStackTrace(Native Method)
     at java.lang.Throwable.fillInStackTrace(Compiled Code)
     at java.lang.Throwable.(Compiled Code)
     at java.lang.Exception.(Compiled Code)
     at oracle.jsp.parse.JspParseException.(JspParseException.java:37)
     at oracle.jsp.parse.OpenJspTagHandler.defineBeans(Compiled Code)
     at oracle.jsp.parse.OpenJspTagHandler.defineBeans(Compiled Code)
     at oracle.jsp.parse.OpenJspTagHandler.validateTagAttributes(Compiled Code)
     at oracle.jsp.parse.JspParseTag.parse(Compiled Code)
     at oracle.jsp.parse.OpenJspTagHandler.parse(Compiled Code)
     at oracle.jsp.parse.JspParseTag.parseNextTag(Compiled Code)
     at oracle.jsp.parse.JspParseTagFile.parse(Compiled Code)
     at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:40)
     at oracle.jsp.app.JspAppLoader.translatePage(JspAppLoader.java:1513)
     at oracle.jsp.app.JspAppLoader.reloadPage(JspAppLoader.java:1146)
     at oracle.jsp.app.JspAppLoader.loadPage(Compiled Code)
     at oracle.jsp.app.JspAppLoader.getPage(Compiled Code)
     at oracle.jsp.app.JspApplication.dispatchRequest(Compiled Code)
     at oracle.jsp.JspServlet.doDispatch(Compiled Code)
     at oracle.jsp.JspServlet.internalService(Compiled Code)
     at oracle.jsp.JspServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.jserv.JServConnection.processRequest(Compiled Code)
     at org.apache.jserv.JServConnection.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
Is there some where else I need to change the configuration for JSP?
Thank you

You can move them from teh default location to wherever you want.
Drag the iTunes folder from C:\Users\<username>\Music\iTunes\iTunes Music to
C:\Users\<username>\iTunes\iTunes Music.
Hold Shift and laucch iTunes then select *Choose existing library* and select the *iTunes library file* in the iTunes folder.

A folder on my desktop is missing, when I search for files in the folder nothing comes up...

a folder on my desktop is missing, when I search for files that are in the folder nothing comes up! There are no items in my trash! please help!!!!

Well, now you know why you should have backed your data up. There are two kinds of computer users: those who have accidentally deleted important data in the past, and those who will do so in the future. You've just switched groups. If your data isn't backed up, it will all be lost sooner or later to boneheaded mistakes or hard drive failure. The only question is when. Good backups are cheap insurance against that day.
Now that those files have been deleted, you'll have to use data recovery software to try to salvage them, assuming the space they occupied on your hard drive hasn't yet been overwritten (a pretty good bet if they were still visible yesterday and you STOP using your computer now, to avoid overwriting them before you recover them). To do so you'll need an external hard drive and one of the following recovery utilities:
Data Rescue 3: http://www.prosofteng.com/products/data_rescue.php
FileSalvage 7: http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
Both are offered in demo versions that will show you what the full version could recover before you have to pay for anything.

JSP to Upload file from client machine to Web Server!

Hi,
I want to upload a file from client machine to web server in order to send it as email attachment, How can I do it? After uploading the file the class should give me the path where the file is stored on the web server and the file name in return!
I know the HTML <file> field but dont know how to copy it on web server, HTML Part will be:
<FORM ENCTYPE="multipart/form-data"
method="POST" action="My.jsp">
<INPUT TYPE="file" NAME="mptest">
<INPUT TYPE="submit" VALUE="upload">
</FORM>
Please help!
Thanks,
- Rahul

You can use cos.jar provided by O'Reilly from http://www.servlets.com/cos/. Take a look at com.oreilly.servlet.multipart.* classes.
Package is provided with source, classes, documentation and, of course, ready-to-use jar file.
It is really usefull and - ready!

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HOW DO I UNINSTALL WINDOWS 8.1 PREVIEW FROM MACBOOK PRO (SNOW LEOPARD)... CAN NOT FIND README FILE FOR WINDOWS PREVIEW. PLEASE HELP

how can i uninstall windows 8.1 preview from my macbook pro?? ive looked for over an hour for the readme file for the windows 8.1 preview and have had no luck. ive done almost everything i can think of at the moment and nothing is working. somebody please help, thanks

Windows 8.1 Preview cannot be uninstalled. However, if what you want is to remove Windows completely, start up in OS X, open Boot Camp Assistant (in /Applications/Utilities) and follow the steps to remove the Windows partition.
If what you want is to install the final Windows 8.1 version, read this Microsoft support article > http://windows.microsoft.com/en-us/windows-8/update-from-preview

I have downloaded Acrobat XI Pro as a 30 day free trial onto my iMac (Yosemite OS). When I open the program using the Adobe icon, a screen appears showing a number of "ReadMe" files. How do I proceed from here?

How do I proceed from a screen showing a number of "ReadMe" files in order to open the Acrobat XI Pro program? I downloaded a 30 day free trial of the program onto my iMac (Yosemite OS).

What is the other file in that folder, not the Readme? Did you actually install the software yet? And did you read the Readme for instructions?

Missing page while converting Postscript files to PDF using Distiller 9.

Hi
Due to some incorrect hexadecimal code in the post script, one of the pages is not getting created in the full pdf. So, we can say that the page is missing in the complete pdf file.
Here is my snapshot of the issue:
1. Offending command issue on a particular post script data is coming up due to some incorrect hexadecimal data.
2. If I run the postscript through Distiller 8, report is getting generated without any missing data.
3. Whereas, if I run it throught Distiller 9.1.3, Distiller is ignoring the page due to following warning.
%%[ Error: typecheck; OffendingCommand: xshow ]%%
Stack:
41
( À
4. If I run the same Postscript file in Distiller 9.3 (latest version), issue is going away.
5. But I have another Report pdf with the same issue but this time with a different hexadecimal exception.
%%[ Error: typecheck; OffendingCommand: xshow ]%%
Stack:
49
(à øÀ øÀ øÿ€ üÿ€ üÿ€ üÿ€ üÿ€ þÿ€ þÿ€ þÿ€ þÿÀ þÀ þà þø?þ?ÿÿþ?ÿÿþ ÿÿþ ÿÿþ ÿýþ ÿùþ?ðà øÀ øÀ øÿ€ üÿ€ üÿ€ üÿ€ üÿ€ þÿ€ þÿ€ þÿ€ þÿÀ þÀ þà þø?þ?ÿÿþ?ÿÿþ ÿÿþ ÿÿþ ÿýþ ÿùþ ü%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
So, either way, even if I upgrade my version of Acrobat from 9.1.3 to 9.3, issue doesnt go away. I think the new Acrobat Distiller is buggy and introducing new problems when compared to Acrobat Distiller 9.
1. Works fine Distiller 8.0
2. More problems with 9.1.3
3. Lesser problems with 9.3 but I cant upgrade to 9.3 unless i see all the missing page problem going away.
Can someone urgently look into this?
Regards
Hari

I am calling Distiller using command line.
"C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrodist.exe" /f/Q/N C:\Reporter\debug\report.dst
report.dst contains the the names of the post script files.
(I have already contacted Distiller server forum and I was told to post the request in Acrobat forum)

Weblogic 9.1/10 not working on jsp:directive.include file="file.jspf"/

Does anyone know how to get rid of this problem? I have a jsp page including a sun java studio creator created page fragment using the tag:
<jsp:directive.include file="myHeader.jspf"/>
here myHeader.jspf is a page fragment.
after deployment, weblogic server report error as:
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /Page1.jsp
Page1.jsp:15:57: Error in "C:\bea\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_user\proj\grb4mk\war\myHeader.jspf" at line 1: The encoding "null" specified in the XML prolog is unsupported.
<jsp:directive.include file="myHeader.jspf"/>
^----------------^
Any idea? I tried both weblogic 9 and 10, same error, change to
<jsp:include page="myHeader.jspf"/>
works. the question is: why not read jsp 1.2 tag? Any way to make it work with jsp:directive.include tag?
thanks in advance.
Edited by: user10243594 on Sep 10, 2008 10:22 AM

The "jsp:directive.include" tag is only valid in an well-formed XML file that specifies all the relevant namespaces. The "jsp:include" tag is used in a JSP file. I'll bet the beginning of your file shows that you don't have a valid and well-formed XML file.
If you found that "jsp:include" worked, then that confirms you have an ordinary JSP file here. Why are you trying to use the XML form? The result of "jsp:include" in a JSP file will be exactly the same as the analogous tag in an XML file.

Missing $$ORACLE_HOME/jsp/demo/README file

Similar Messages

Maybe you are looking for