Missing Project name in timesheets

We are using Project Server 2010 with timesheet entry in single entry mode. Version is SP1 with the CU until DEC2012 installed.
Reviewing one of the approved timesheets we found a timesheet line with actual data with a blank project name.
Clicking on the taskname opened the detail of the task in the PWA; and not as expected an error message. But this means that through the timesheet the plan can not be retrieved although the plan really exists. Any reason why and when this can happen?
Regards
Geert

Hello Guillaume,
We have only seen this on one task over all plans we have (and we have a lot of them). It's a normal task; fixed units; effort driven; not moved nor changed; Only one person assigned on
the task.
The plan contains the actuals as mentioned in the timesheet, actuals cannot be changed in the projectplan.
I will try now to recall the timesheet and we'll see what happens...
Regards, Geert

Similar Messages

Project Code and Timesheets

Hi,
We have a question about the Project Code legibility in the Timesheets Entry screen in OTL. Can the Project Field be extended to display the project code and the project name?
Can we do this without customisation?
Thanks,
V

I think, Project name get displayed after project is selected.
Do you want to do something different.
thanks,
Manish

Missing Projects in Aperture 2.1.4 after database rebuild?

Had issues when editing a recent import in Aperture 2.1.4. I looked for help and followed this: I repaired permissions on my HD, then rebooted. I still had the same behaviors when working on the images so I tried the Aperture "Consistancy check". It said it was running a "Vacuum of Database" and then reopened Aperture. I decided to "rebuild the database" and finished my editing on that Project. Before I did the rebuild I did a Time Machine back up to an external HD. After I did the rebuild I did a Vault update. (My Library is Managed.) Later when searching for some photos that I had imported last year from my iPhone, I discovered that several iphone projects were missing. I searched the Library with Keywords, dates, etc and the files do not show up. I looked in deleted files from my last Vault. The only iphone files were ones that I had deleted back in Sept 2012. I did a spotlight search on my harddrive but could not locate files by names. I am talking about hundreds of photos in these projects. I know that I did some keywording and some have Instagram tag. Also, when I open Aperture it says that 466 Projects have not been backed up to the Vault and 19 files. (There has been one Project with those 19 files imported since the last Vault update.) In Aperture it says that I have 465 Projects and 27,578 images. The size of the Library is 180.28GB. The last Vault update is 154.7 GB. I think that the missing projects were imported at times from Sept 2012 through Dec. 2012.
How do I see if they are in a previous Time Machine backup and restore only those missing projects to Aperture? Is there a way to check the contents of my lst Vault back up? (I also do not want to lose my two recent imported and editted projects.)
I did just look at the contents (Show Package Contents) of my Aperture Library in the Finder and I can see the Library Folder in the my organization where they reside in Aperture and the icons with the named missing projects. I know that I should not mess with the package, but does this indicate that they are still on my harddrive? I also see some Albums that I remember making in the Dec 2012 Folder. They no longer show up in Aperture. It seems that somehow I ended up with an earlier version of my Aperture Library after my troubleshooting. I would love to get back to the earlier version of the Library and then add in the last two projects and edits that I added in Feb 2013. Those two projects, including the one that I was working on when all this began are still there, but I am at the very least missing many hundreds of photos of my family and travels that did reside in those Projects. Any help would be greatly appreciated. (I need to upgrade to Aperture 3 asap, but need to solve this first.)

Evans Brasfield wrote:
Anyone recovered from a similar issue?
Yes, I have inadvertently discovered I have the same problem with TIFFs I created by scanning in some very old photographs as TIFFs three years ago. I did extensive work on the old photos to restore their quality. Three years ago, everything seemed to work fine including printing the TIFFs. I just discovered Aperture 2.1.4 and Aperture 3 can't find the managed masters even though I verified they are in the libraries!
Like you I don't need to salvage the masters since I can drag them out of the library; I want to export the versions so I have my retouching work saved. At least I can see the final work in Aperture 2 but in Aperture 3, all is white or black previews with its managed masters not found.
Message was edited by: Rick Lang

Circle next to Project name

I have an open circle at the right edge of the Project name. What does it mean? The circle is outlined in gray and the rest is the background darker gray color. I roll over it and nothing pops up. If I click on the project name as if to change the name, the edit box covers the circle.

Yes, that looks like a beginning import or an incomplete sync with a Facebook, Flickr, or Mobile Me album.
MtnBiker, have you checked, if all images in your project have been imported correctly, or are images missing? If you interrupted an import and images are still waiting to be imported, I'd connect the camera, card reader, or disk again to let the import finish.
If your project is synced with any online account, check the settings for this account in the web preferences and your internet connection to let the sync complete.
If your project does not need in import or sync to finish, it may be a question of broken preferences, like Kirby suspects, but also an inconsistency in the Aperture library. Then I'd repair the Aperture library in any case, in addition to Kirby's recommendation to trash the preferences.

How to add folder/project name to a File Naming preset

Here's a tip to automatically add the name of the Project or its parent Folder to the filename during Import or Batch Change.
I always used a custom field for adding my client's name to the filename upon Import or Batch Changing versions or masters. But often I would forget to change the custom name, and since it's auto-populated with the previous entry, I'd end up with a bunch of files with the wrong client's name on them. That looks kind of bad. So once I saw with Aperture 3 you can add the Project name or Folder name when relocating referenced files to the new folder structure, I was excited to be able to do the same for the filenames at import. Well, no such luck. They're not an option when you create a custom File Naming preset.
However, I recently decided to poke around inside some plist files, and found a workaround. I discovered the format string for Folder Name is %F and Project Name is %P. The trick is getting the code into the Format Field where you create the preset.
Create a new File Naming preset by choosing "edit" from the Version Name menu during Import or Batch Change. Drag everything you want in the name into the Format field, and enter %F or %P where you want the Folder or Project name. The tricky part is that you can't insert it between two existing criteria. It only works at the very end. After you have it in place, you can drag the criteria around to get it in the order you want.
The alternative method is to insert the code directly into the plist. PLEASE, always make sure you're working with a copy and have a good backup when you're poking around in such things. If you have trouble getting the code to take from within Aperture, you can try this. Same as above, create a new preset, but this time, enter an F or P where you want the Folder or Project name. Give it a unique preset name and save it. Then Quit Aperture. Navigate to ~/Library/Application Support/Aperture/FileNamingPresets.plist, and make a copy of the file, then open with Property List Editor. Dropdown the plist and then dropdown the item you want to edit. You should recognize it by the preset name. Now the easy part. Click in the FormatString field and insert the % character before the F or P you entered in the Format field. Save and you're done.
I discovered later that while the Folder and Project name works just fine during import, for some reason only the Project name works during Batch Change. The Folder name simply creates a "-" in the filename.
In case this is seen as a hack and gets deleted, I'm also submitting it to http://www.macosxhints.com/ and I suspect if anyone from MacCreate sees it, they'll steal it too, as they're known to do.

I do not think there is an out of the box way to do this.
The immediate solution that comes to mind is using a workflow, that runs everytime a document is uploaded/item created, which may be too much for your scenario.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

PWA 2010 error when i try to open the project name in Project Center

Hi, this is my first post.
Im having a trouble with our Project Server, when i try to open the project name in Project Center it gives me an error like this:
ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information
Stack Trace:
[SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information]
Microsoft.Office.Project.Server.WebServiceProxy.PWA.WorkflowGetProjectDrilldownInformation(Guid projectUid, String userPropToClear, Boolean bCheckOutProject) +401
Microsoft.Office.Project.PWA.ApplicationPages.ProjectDrillDownPage.OnLoad(EventArgs e) +822
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
And also when i try to open the document that associated with the project in project center it gives me an error like this :
Exception Details: System.Web.Services.Protocols.SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore
to access all error information
Source Error:
Line 12: bool LoadLinkItemsPage = (Request.QueryString["Task"] != null);
Line 13:
Line 14: ProjectWSSInfoDataSet ds = PJContext.Current.PSI.WssInteropWebService.ReadWssData(ProjectGuid);
Line 15: if (ds != null && ds.ProjWssInfo.Rows.Count > 0)
Line 16: {
Source File: c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\PWA\COMMON\wssnav.aspx Line: 14
Stack Trace:
[SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructore to access all error information]
Microsoft.Office.Project.Server.WebServiceProxy.WssInterop.ReadWssData(Guid projectUID) +377
ASP._layouts_pwa_common_wssnav_aspx.PJWebPage_OnLoad(EventArgs e) in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\PWA\COMMON\wssnav.aspx:14
Microsoft.Office.Project.PWA.PJWebPage.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
has anyone experienced this
before and might be able to help? Thank you!

For what it's worth, given the age of this question, I've found that stopping and starting the Project Application Service on each server via Central Admin is less disruptive to the rest of your farm when using Project Server in a larger SharePoint
farm.
IISRESET will cause active user sessions to be disconnected and could result in lost data.
I also found that recycling the app pool associated with my Project Server web application in IIS and restarting the web site did not resolve this situation so the IISRESET is not a guaranteed fix.
Targeting only the Project Application Service from Central Admin removes this minor risk and actually restored access to our Project Sites.
N03L.

Discussion About The Use Of Project Server 2013 Timesheet Custom Billing Categories (Post SP1 and April 2014 CU Install)

In support of a consulting company using timesheet custom billing categories to designate project time as billable onsite, billable offsite, and non-billable, I've encountered a series of issues which appear to be associated with the custom billing category
timesheet lines. These issues cause timesheet users to get frustrated, and contribute to misalignment between project actuals and timesheet actuals. We're in Single Entry Mode, no pre-population, SP1 and April 2014 CU Installed.
I'll enumerate the issues here and pose the question to the community as to whether others are experiencing any/all of these things, and if so, ask if any workarounds have been discovered. We're working with Microsoft to validate these independently,
but I am posing the questions to the community to gather additional information, and hopefully save some folks time in troubleshooting similar issues.
1.When time is entered on an assignment into timesheet lines of multiple billing categories, only time entered since the last save is getting saved and ultimately sent, on timesheet submit, to the approval center. Although the previously entered and
saved time appears in the application interface when the timesheet is re-opened, only data since last save is actually saving to the server or processing through the approval center. We believe this is the primary cause for timesheet and project actuals
being out of alignment.
2."_ Error Loading". When assignments are added, deleted, or changed after a timesheet has been created, standard timesheet lines are added, deleted or changed (i.e. synchronize) with the assignments. However, for custom billing category
timesheet lines, they do not change when the assignments change, and they aren’t removed if the assignment is removed. We believe this causes secondary errors, like the "_Error Loading" (and others as will be described below).
3.When a timesheet with time in a non-standard billing category is deleted and recreated, time is arbitrarily moved to standard timesheet lines for the same assignment. If the task assignment is subsequently removed, the timesheet line causes the timesheet
to break.
4."Error Communicating with Server". When trying to submit a timesheet, a pop-up box appears indicating that there is an error communicating with the server. This error appears because a timesheet line is no longer associated with a project.
In order to submit the timesheet the orphaned timesheet line must be identified and manually removed. One technique we found which helps to identify an orphaned timesheet line is to select a task and submit task progress. Repeat for all timesheet lines until
you get an error. The timesheet line(s) with the error can be manually removed from the timesheet, fixing the error.
5. Unable to Open Specific Timesheets without Error. There are certain scenarios when the "Remove Task" feature is used or an assignment is otherwise removed after creation of a timesheet with custom billing category lines, which causes orphaned
timesheet lines. These orphaned lines can cause issues when trying to open a timesheet. The issue can appear when timesheets are in progress in multiple periods. In the problematic scenario, time is entered and submitted in one period and subsequently
the task is 'removed' from another period before the PM processes the first approval request. Process governance can certainly help here, but improvement in the way synchronization occurs between project assignments and custom billing category timesheet lines
would be great. The error can often be resolved by re-adding the assignment for the problematic timesheet user to the project (which creates a new assignment), and then allows you to open the timesheet. Then time can be moved from the old timesheet
line to the new timesheet line, and the old one can be removed.
In 4 and 5, sometimes we can't open a timesheet without error, and other times we can open it but not submit it. We are not 100% clear on all the different causes for each. Each of these issues are suspected to be contributing the the misalignment of
data between project actuals and timesheets, which can be a real problem for external projects for which time collected through timesheets are being used to generate invoices.
Although these may seem like separate issues, warranting separate questions, I decided to post them together because they all seem to be related to synchronization of project assignments and timesheet lines for custom billing categories.
Any thoughts or suggestions from the community would be appreciated.
Best regards,
Justin
Justin Naughton

There are many causes for each of the errors mention. It would be best to put one issue to the forum at a time. For example, some of these issues occur then tasks are deleted from projects but a timesheet has been submitted. Depending
on the scenario, some of these issues have been fixed with the latest service pack.
Other issues are due to bad scheduling habits with the project managers and so first determining what they have done can help resolve some the issues.
_error Loading, is because something is NULL in the data and the jave is choking when it build the form. Again, these may be because of delete tasks, resources, projects or someone doing copying and pasting of rows.
cheers!
PS. Train your PM to not COPY and PASTE rows in project schedules. It can be done, but it can create problems. There are over 500 fields and some have unique data and the copy paste creates havic.
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Error: java.util.zip.ZipException: missing entry name

Does anybody know how to solve the following error? I got this error when I was trying to update files in my CVS.
OracleJSP: oracle.jsp.parse.JspParseException: Line # 2, <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c"%>
Error: java.util.zip.ZipException: missing entry name
Thanks

Hi,
I get the same exception while reading a ZIP file. The size if the ZIP file is just 82KB but I am reading it over FTP not sure if it makes any difference. I am using JDK 1.4.2_05. Here is the code I am trying to execute.
public class TestFTP {
public static void main( String[] argv ) throws Exception {
String inboundPath = "/transfer/inbound/";
FTPClient ftp = new FTPClient();
ftp.connect("123");
ftp.login( "123", "123" );
ftp.changeWorkingDirectory(inboundPath);
FTPFile[] zipFiles = ftp.listFiles("*.zip");
TelnetClient telnetClient;
for(int i=0;i<zipFiles.length;i++){
System.out.println(zipFiles.getName());
ZipInputStream zis = new ZipInputStream(ftp.retrieveFileStream(zipFiles[i].getName()));
for (ZipEntry entry = zis.getNextEntry(); entry != null; entry = zis.getNextEntry()){
System.out.println(entry.getName());
The error message is
java.util.zip.ZipException: invalid entry size (expected 10291 but got 10233 bytes)
     at java.util.zip.ZipInputStream.readEnd(ZipInputStream.java:367)
     at java.util.zip.ZipInputStream.read(ZipInputStream.java:141)
     at java.util.zip.ZipInputStream.closeEntry(ZipInputStream.java:91)
     at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:69)
     at test.TestFTP.main(TestFTP.java:41)
Exception in thread "main"
Please let me know if you were able to fix the problem.
Thanks

Adding Project Name in OTL Time Card

Hello All,
I have done the following Changes to display Project Name in OTL time Card in R12.1.3 with no luck, please let me know.
1. Added Attribute28 as PROJECTNAME for Context - PROJECTS in OTL INformation Types - DFF
2. Using AK Html Forms, Added HXC_CUI_PROJECT_NAME to HXC_CUI_TIMECARD
3. Added Mapping PROJECTNAME
4. Ran the Generate Flexfield and Mapping Information
5. Modified and uploaded the ldt
6. Made Changes to Preferences using OTL Application Developer to look at latest layout
7. Bounced Apache Server
BEGIN HXC_LAYOUTS "ZEN_PROJECTS-TIMECARD" "HXC"
OWNER = "RSREENIV"
DISPLAY_LAYOUT_NAME = "Z Projects Timecard Layout"
LAYOUT_TYPE = "TIMECARD"
TOP_LEVEL_REGION_CODE = "HXCCONFIGTESTCUI"
LAST_UPDATE_DATE = "2012/01/06"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Project"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "LOV"
QUALIFIER_ATTRIBUTE1 = "ProjectLOVVO"
QUALIFIER_ATTRIBUTE2 = "N"
QUALIFIER_ATTRIBUTE3 = "HXC_CUI_PROJECT_LOV"
QUALIFIER_ATTRIBUTE4 = "809"
QUALIFIER_ATTRIBUTE5 = "12"
#QUALIFIER_ATTRIBUTE6 ="HxcCuiProjectNumber|PROJECT-DISPLAY|CRITERIA|N|HxcCuiProjectId|PROJECT|RESULT|N|HxcCuiProjectNumber|PROJECT-DISPLAY|RESULT|N"
QUALIFIER_ATTRIBUTE6 ="HxcCuiProjectNumber|PROJECT-DISPLAY|CRITERIA|N|HxcCuiProjectId|PROJECT|RESULT|N|HxcCuiProjectNumber|PROJECT-DISPLAY|RESULT|N|HxcCuiProjectName|PROJECTNAME|RESULT|N"
QUALIFIER_ATTRIBUTE8 = "ProjectNumber"
QUALIFIER_ATTRIBUTE9 = "ProjectId#NUMBER"
QUALIFIER_ATTRIBUTE10 = "oracle.apps.hxc.selfservice.timecard.server.ProjectLOVVO"
QUALIFIER_ATTRIBUTE17 = "OraTableCellText"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute1"
QUALIFIER_ATTRIBUTE28 = "PROJECT"
LAST_UPDATE_DATE = "2004/05/24"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
### Project Name Component start ###
BEGIN HXC_LAYOUT_COMPONENTS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
COMPONENT_VALUE = "PROJECTNAME"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "HXC_CUI_PROJECT_NAME"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "215"
COMPONENT_DEFINITION = "TEXT_FIELD"
RENDER_TYPE = "WEB"
PARENT_COMPONENT = "Projects Timecard Layout - Day Scope Building blocks for worker timecard matrix"
LAST_UPDATE_DATE = "2004/05/24"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
# Show Label (Component)
QUALIFIER_ATTRIBUTE1 = "N"
# Show Label (Parent Component)
QUALIFIER_ATTRIBUTE2 = "N"
# Field Width
QUALIFIER_ATTRIBUTE3 = "20"
# Field Height
QUALIFIER_ATTRIBUTE4 = "1"
# Style Class
QUALIFIER_ATTRIBUTE17 = "OraInlineInfoText"
# Display On New Line
QUALIFIER_ATTRIBUTE20 = "N"
# Show Outside Building Block
QUALIFIER_ATTRIBUTE21 = "Y"
# Outside Direction
QUALIFIER_ATTRIBUTE22 = "L"
# Access Method
QUALIFIER_ATTRIBUTE25 = "FLEX"
# Context
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
# View Object Attribute
QUALIFIER_ATTRIBUTE27 = "Attribute28"
# Component Alias
QUALIFIER_ATTRIBUTE28 = "PROJECTNAME"
# Read Only
QUALIFIER_ATTRIBUTE30 = "Y"
LAST_UPDATE_DATE = "2004/05/24"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
### Project Name Component end ###
Edited by: 891594 on Jan 6, 2012 11:40 AM
Edited by: 891594 on Jan 6, 2012 11:54 AM

In extended controller processRequest method:
Get the project ID, asssuming that you are passing project id through hash map.
String prjId = pageContext.getParameter("ProectId_Parameter");
Default the LOV item value using:
OAMessageLovInputBean msglov = (OAMessageLovInputBean)webBean.findChildRecursive("ProjectId");
if(msglov != null)
msglov.setText(pageContext,"Hello");
-Anand

Linked content using RH project name for topic title instead of FM file/heading name

Anyone seen this before? (and, yes, for anyone who is interested, the epub of my book should be available once I get this solved)
-Matt
PS: the htm filename is fine, it's just the topic title that's odd.
Message was edited by: mattrsullivan

I'm pretty sure that was in reference to setting Topic Title markers...not something I want to do in a 700 page book!
More info: The book processes and validates a clean EPUB if I omit the index, and throws 300+ errors when I include the index.
Via Notepad++. the index shows <section name=(the project name)>, so I imagine it's taking offense at the eleventy-six files with the exact same topic identifier.
Anyone seen this before??
-Matt

Missing file name in the sequence

Hi All,
I have struck with the problem which is finding the missing file name in the file_name column. This column also have sequence.
FAX_NAME RECEIVED SENDER FAX_SIZE
fax000000433.tif 01-JAN-07 redro 10k
fax000000434.tif 01-JAN-07 redro 10k
fax000000435.tif 01-JAN-07 redro 10k
fax000000436.tif 01-JAN-07 redro 10k
fax000000437.tif 01-JAN-07 redro 10k
                              One file name missing
fax000000439.tif 01-JAN-07 redro 10k
fax000000440.tif 02-JAN-07 redro 10k
fax000000441.tif 02-JAN-07 redro 10k
fax000000442.tif 02-JAN-07 redro 10k
fax000000443.tif 02-JAN-07 redro 10k
fax000000444.tif 02-JAN-07 redro 10k
fax000000445.tif 02-JAN-07 redro 10k
fax000000446.tif 02-JAN-07 redro 10k
fax000000447.tif 02-JAN-07 redro 10k
fax000000448.tif 02-JAN-07 redro 10k
fax000000449.tif 02-JAN-07 redro 10k
fax000000450.tif 02-JAN-07 redro 10k
Here i want to retrive the Faxname(fax000000438) which is missing
The output like..
I've Designed one BIRT rptdesign for this this in the bellow formate..
FAX_NAME RECEIVED SENDER FAX_SIZE     Missing_Faxes
I've tried with bellow query but i did't get.
select Fax_Name digits from(select min(digits) MN from (select translate(s, '0' || translate(s, '1234567890', ' '), '0') digits 7 from (select filename s from received_faxes))) connect by level8 minus select distinct digits from (select translate(s, '0' || translate(s, '1234567890', ' '), '0') digits 10 from (select filename s from received_faxes))
Could you pls help me..

This?
SQL> with t1 as
2 (select 'fax000000433.tif' nam from dual union
3 select 'fax000000434.tif' from dual union
4 select 'fax000000435.tif' from dual union
5 select 'fax000000436.tif' from dual union
6 select 'fax000000437.tif' from dual union
7 select 'fax000000439.tif' from dual union
8 select 'fax000000440.tif' from dual union
9 select 'fax000000441.tif' from dual),
10 t2 as
11 (select to_number(mid(nam,4,9)) faxno from t1),
12 t3 as
13 (select max(faxno) ma, min(faxno) mi from t2)
14 select (mi+level - 1) faxno from t3 connect by level <= ma - mi + 1
15 minus
16 select faxno from t2
17 ;
     FAXNO
       438
SQL>

How to make project name / no. visible in suppor message?

Hello,
When creating a support message (NOTIF_CREATE), I can provide a project name /project number with the message.
This info is also available, when starting the transaction monitor (CRM_DNO_MONITOR).
But when looking into the message itself, this information is not available anymore.
Where can I make this info visible?
I am assuming, that the project is somehow linked to the support message and that the project is available in principle.
Can anyone provide me a way how to link / show the project within the support message?
Thanks and Regards,
Jan

HI
another helpful link i found, but nt sure that clear ur issue
[Re: Field "Subject" in the web service desk (Incident Management)|Re: Field "Subject" in the web service desk (Incident Management)]
[Re: User Status profile in Service Desk|Re: User Status profile in Service Desk]
jansi

How to export images with Project Name to be visable by Photo Mechanic.

Hello all,
I am trying to create another complete set of my images, that can be edited by outside programs (Photo Mechanic and/or Lightroom). I am doing this by exporting the images out of a managed library. I want the Aperture "*Project name*" and Rating fields to be passed to Photo Mechanic. And then I want PM to be able to do queries on the Metadata fields containing the Aperture Project Name and Rating. My intention is to use Photo Mechanic to rename the images and relocate the images but still keep track of the Rating and Project Name.
In Aperture, when I add a custom metadata item under IPTC and export the image, that custom metadata item does not show up in PM or Bridge for that matter.
How can I export images and have the Rating and *Project Name* be exported and visible in PM or LR or Bridge?
Thanks in advance,
Dick B.

There is not an easy way but Ian Wood's tool might help you out.
Personally I would just use the "subfolder format" drop down options available in all of the export and relocate dialogs to sort them into directories that are based on Aperture project name - easy enough considering those other tools use file system based folders for there organization structure anyway.
RB

Missing Project in Aperture 3

I've had a project go completely missing and I'm stumped as to what happened or how to find it. I did all my work on the project and organized it, with 3 others, under a folder. I created a slideshow and I selected some images and posted them to my Mobile Me Gallery. I've done nothing else to the project, but now the entire project is missing, and the images aren't showing anywhere on Aperture.
The Mobile Me gallery online still includes images from my missing project.
help?

Hi Tony, thanks for the welcome.
I've searched and I still have only the one library. The library is about 120GB so it would be hard to create without noticing.
Luckily I did find the project on my backup, so I didn't lose it completely. It was an accident that I discovered that it was missing at all. The photos were taken less than a month ago, and my backup was from mid-September. So my issue is trying to figure out how it could have disappeared at all, because I certainly don't want it to happen again.
With the size of my library it is going to be difficult to maintain multiple iterations of my Aperture library. My plan was to maintain two backups - one at home and one at work on external hard drives. But if I have to plan for multiple versions going back into time I will. Maybe a Time Machine backup at work will be the answer. I have been using SuperDuper backup and my laptop is 4 years old and not all that powerful.

Project Center - How to Update / Correct the URL/Link stored in the Project Name field.

In the Project Center list, the link in the "Project Name" field for some projects take you the the project details page and some display the project schedule. How can I update/correct the links to display the project schedule?

Reason for this behavior is your enterprise project template which your project manager used for creating project.
We create Enterprise project template, associate PDP , Schedule, workflow according to our need then we use these Enterprise project template for project creation.
In your case some of the project manager must have used basic template( default template) for some project, Custom Enterprise template for some project and f you are using workflow then workflow template for some project, that is why you are able to see
PDP page first for some project and Schedule page for some project.
In order to change it you can change default PDP as schedule for Enterprise project template then open project save and publish them.
kirtesh

Missing Project name in timesheets

Similar Messages

Maybe you are looking for