Missing two screws on the bottle of 15 rmbp
Missing two screws on the bottle of 15 retina macbook pro. Where can I get screw? I need to repair it.
"Notice the two screws at the left side of the computer. Although they can be removed, they exist for cosmetic purposes only and do not require removal. If they are removed, however, be sure to reinstall the two identical 3-mm long shoulder screws at the corner near the ports. Do not use longer screws."
I would say if they are stripped, stick some silicone seal in the hole and the put the screw in and let it dry. You should be good to go.
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Macsimum News Associate Editor Creator of 'Mac611 - Mobile Mac Support'
Similar Messages
-
Hello I have the Latest version of Adobe Lightroom 5 to date (8/26/14) however just recently when I open the develop tab I'm missing two options on the right side column "Lens correction" and "Effects" I do not know I've hit some setting to remove those options or if this latest version deleted those options? Any help would be greatly appreciated and please excuse my ignorance :/
Right click next to one of the other headers and you will get a pop-up to enable the missing ones.
-
I am missing a screw from the bottom of my laptop which I sent to the genius bar to get repaired
Where/How can I get a new screw?
I would contact them. Make certain that you indicate if it a long or short one (screw). You could also bring the MBP back to them.
Ciao. -
when I download a podcast on my iPhone why is the release date missing? This really screws up the sort order.
Hello yung ron,
It may be that your iPhone's set to sync automatically, which can potentially remove any music that's been added to the device. It may help to set the device to 'manual mode,' so that you have complete and total control over what content is on the device.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Cheers,
Allen -
What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?
It's the part that means you've voided your warranty and the right to get an out-of-warranty replacement from Apple.
-
Two machines saving the same file as different sizes?
My coworker and I both have the same version of Illustratir (CS6) and both use Lion on iMacs, but today noticed something weird. He saved a file similar to a file I had done before as both an eps and a pdf and his file size was more than twice what my file sizes usually are. I thought it was odd, so I copied everything from his file into a new file (same dimensions) and saved out an eps and pdf (default settings), and like I thought, my files were less than half the size of his.
Why would two machines be saving identical files at different sizes? Is there a setting somewhere I'm missing? Everything in the file is vector, if it matters. There's not even any editable text.See the mechanism of saving here: http://superuser.com/questions/66825/what-is-the-difference-between-size-and-size-on-disk
The size of the "blocks" depends on the size of the disk and how it's been formatted. -
How can I sync two Bolds with the same contacts?
I have two bolds and are trying to sync them both with the same contact list.
The first bold has all the contacts and I sync that phone using the BB Desktop manager setup with Outlook Express main identity.
When I try to sync the second bold with the same setttings, outlook express and main identity, none of the contacts transfer to the new bold, why?
What is the best way to sync two phones to the same contact list?
Claim your missing money with foundmoney.com today Missing moneyAny solutions to this please ????
Claim your missing money with foundmoney.com today Missing money -
I'll be posting all the details of this tomorrow.
So, I'm back, the OP.
As briefly as i can:
Two phone family, currently one smart, one dumb phone. The dumb is eligible for upgrade.
Call into V and spoke with "Anthony" to get info on what plan(s) I might consider as I upgrade the dump to a new iPhone 6. Currently an old "grandfathered in" Nationwide 700 plan. This was Friday Sept 19. Get some info, which I assumed to be correct, including the fact, his words not mine, that the "upgrade (device) fee" can be negotiable.
Before I had any first hand knowledge, I assumed that I'd better get a "second opinion" so I drove over to my local Verizon (corporate) store. Well, I got a different story, including the percentage of my employee discount on service, my employer gives a 20% discount and has for years, I have my current statement / bill in my hand. But no.... Verizon guy says that is wrong, its only 18%. I ask him about upgrade fee being negotiable. He says no, never. So what had I learned? That V guy on the phone from Friday was either lying or just ignorant.
Soooooo.... now its Tuesday, Sept 23. The "BIG" day, day of 3 hours 50 minutes on the phone with SEVEN different V people, all of them telling me something different about what plan(s) I'm eligible for, your employee discount is 17, no 18, no 20 percent. Yes we can negotiate an upgrade fee, no we can't... At one point, now a couple hrs into it I say I've had enough, I want to talk to a supervisor. "I'm sorry sir, supers can't come to the phone" WHAT? Well later, once I did speak to a first level supervisor and then a second level I of course found out that was wrong - more lies / misinformation? The supervisor took the name of that V CS rep and looked at my every growing call log and said that he would speak to the CS rep.
So, nearing the 3 hrs mark into my attempt to find out about plans and buy an upgraded phone for my plan I reach "Brian". I have his direct number. Apparently he is something more important that the past 6 people I've spoken to over the past thee hrs. I tell him: "EVERY SINGLE PERSON I've spoken to so far has told me something different, and or contradicted what the last person I've spoken to has said!!!!!" Yes you can have 2 single line plans, no you can't, to get this plan your upgrading device has to be on the "Edge" plan, no it doesn't, your employers discount applies to the bottom line, no it doesn't, only to the data, and on, and on, and on.
Sooooooo I tell Brian, "here's how its going to go... YOU are going to wave the upgrade fee. I don't care where the money comes from, V or right out of your pocket. I've been on the phone for now closing in on FOUR HOURS...."
Sooooo he agrees. I laugh and tell him, "You know, it has nothing to do with the money, not its all about screwing V as much as I can, and wasting yours and V's time."
He says, order your phone and plan this week and I'll call you Friday (today Sept 26) and then credit your account the fee.
Soooo yesterday (Sept 25) I call in to do just that, order the phone and plan, WHICH I was told really the only plan that would suit you would be a More Everything Plan. So, ok that's that.
I speak to a CS / Sales rep. I buy the phone and then we go on to the plan. I tell the rep THIS WHOLE LONG STORY, and it looks like we are heading towards the More Everything, BUT she says to me, "you know, you could do that Single Line plan for BOTH of your phones?" I say "WHAT????" I was told by two reps NO, and two reps "Well.... maybe". This plan gets me everything I want AND saves me $10 a mo.
Sooooo we go for that, BUT.... I can't change my plan (from current Nation Wide 700) to 2 two single line plans until I activate my new phone (which will be 4 weeks until I get it - iPhone 6), SOOOOO once it arrives I HAVE TO CALL BACK TO V and switch - how much fun will that be??? MORE time (hours?) with V.
So we agree.... The rep says I just have to transfer you to our automated system where you'll agree to terms and conditions.. Fine. Up comes the computer voice... and.... it says "hello.... you are upgrading your device (123) 555-1234 (it gives a real number), press 1 if this is correct." WHAT???? That is NOT the phone number of my device ***? The auto system gives me the option to press another number to "enter a different number", so I do, AND...... The call disconnects.
Now... If I could track down ANY ONE OF THE PAST 8 PEOPLE I'D SPOKEN TO OVER THE PAST TWO DAYS, YOU'D BE READING ABOUT ME - "Upset customer KILLS everyone at V". I AM SO ******* ****** OFF AT V... I'm now into 2 hrs today, plus the nearly 4 hrs the other day on the phone.
Soooooo.... I call back, have to tell the story again, this time to "Nick" in N.Y. Nick says just go on line to your account, you can accept the terms there. Well, what do you know.... It works, amazing.
But.... Nick says great and reads back the info on the phone I bought and says "...and I see you are on the More Everything Plan..." WHAT, STOP, STOP, STOP. I tell Nick, "Nope, I am not, I never agreed to that, I'm waiting, keeping my old plan for 4 weeks until I get the new phone, THEN I'm to call back (oh joy) to V and upgrade my plan"
Nick say's well you have the More Everything plan, and it is costing you $10 more a month, BUT I can't un-do it because there is a purchase (my phone) in progress... I am not BEYOND MAD. We are now at SIX HOURS TOTAL TIME ON THE ******* PHONE OVER TWO DAYS.
I ask to speak to Nick's supervisor. Melanie comes on the line. I, weather she wants to hear it or not, TELL HER THE ENTIRE STORY, that when (and GOD help him if he doesn't) Brian, the top end supervisor calls on Friday (today) to check on my experience buying the phone / upgrading the plan AND to credit my account the upgrade fee, I'm going to have to tell him about EVERYTHING THAT'S HAPPENED TODAY and about the TWO MORE HOURS ON THE PHONE. Melanie says, yes you do now have a More Everything... All I can do sir is apply a credit back to your account for the difference in cost between your old (what was my current) and the new More Everything (the plan I NEVER agreed to be on).
So, that is where we are as of now, Friday Sept 26 AM. "Brain" said he'd be calling by noon-ish Pacific time. I've got his direct number, and If I don't here from him by noon, his phone will be ringing off the hook very 30 seconds until he picks up.
My experience to simply upgrade one of the two phones on my plan and the plan itself HAS BEEN A NIGHTMARE. VERIZON is sooo SCREWED UP. NO TWO PEOPLE KNOW THE SAME INFO, and the INEPTITUDE displayed is sickening. -
Using two routers for the same SSID
So here's my story. I have a standard Actiontec router in my basment, connected straight to the coax outlet, and connected by LAN Ethernet to a crappy computer nobody uses. It gives off a WPA2 wifi network, let's call it MyNetwork. For the longest time it's been the only router in the house. The coax outlet is on a splitter, splitting the coax outlet into one wire that goes to the Actiontec modem/router and the other to my TV STB. Recently we installed a new coax outlet on the other side of my house and next to it we have a brand new desktop computer that we use often. It has no wifi so and we can't run an ethernet cable throughout the entire house so we got a new Actiontec modem/router from our neighbor who just moved out. It's the exact same Actiontec device.
What we want to do is make it so that both routers give off signal on the same MyNetwork we have to make it a wider reaching signal, and so that I can connect the new desktop computer to the new router with an ethernet cable. I've read so many guides and they're all so confusing and it's such a mess that I almost completely screwed over my network. it seems like the two routers are completely independent of one another, not even aware of the others' existence. The new router is definitely in range of the old one. I've logged into 192.168.1.1 on the new computer and the new router seems to think it IS the old router (or so I think). It showed me all the same devices that have connected to MyNetwork and such, but then again it's always hard to be certain exactly which device is which. After messing around I must have changed some IP address or something, but it seems that 192.168.1.1 doesn't take me to the Verizon login screen, but 192.168.2.1 does. Can I reset those IP addresses?
And of course, can somone please provide a clean, easy to follow course of action as to how to set up two routers on one network?maxbirch wrote:
... I have a standard Actiontec router in my basement ... connected by LAN Ethernet to a computer ... It gives off a WPA2 wifi network, let's call it MyNetwork ... The coax outlet is on a splitter ... one wire that goes to the Actiontec ... other to my TV STB ...
... installed a new coax outlet on the other side of my house ...
... What we want to do is make it so that both routers give off signal on the same MyNetwork we have to make it a wider reaching signal, and so that I can connect the new desktop computer to the new router with an ethernet cable ...
... can somone please provide a clean, easy to follow course of action ... ?
I suspect it might be a good idea to step back reconsider your ultimate layout. Essentially you now have two (or if the STB is also included, three) coax drops connected to the ONT. It seems that you desire that one of these service the STB, and the other two each service a desktop and a wireless access point. If this is the case, continue reading.
There is no need to consider the original Actiontec router as the primary router, wireless or otherwise. Use the new coax location to connect to the primary Actiontec router (you can use either router). For starters, reset both routers to their factory defaults using the reset switch on the back of each device (for details, do a search).
Once the primary router has been located (or relocated) to the new coax drop, just connect the new desktop there using an Ethernet cable connected to one of the LAN ports on the back of the router. Then set up your primary wireless network based on this router (once again, do a search on these forums for specifics on setting up a basic wireless home network).
Now use the original coax outlet where the first router was located to set up another access point. This access point will provide Ethernet connections plus an additional wireless network (if it's still needed). However you cannot have two wireless devices on a single home network with the same SSID (i.e., network name). Here are details on some methods to do this:
http://www.dslreports.com/faq/12506
For additional details, here's the complete FAQ:
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&cad=rja&sqi=2&ved=0CCwQFjAA&url...
Take a careful look at these suggestions and references to decide if this is what you want. Then report back if there are remaining questions. Good luck. -
My email only display the list of mails in my in box with a preview of the first two lines of the body of the message. When one clicks on the message to open it, only the header is displayed in the right hand side of the screen - the actual message is missing. This happens on older mail previously downloaded that use to work properly as well. Any idea how to fix this?
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Two clients in the same server--Script??
Hi Folks,
1.I have two clients in the same server say 100(used for dev) 120(used only for testing).I had developed a script in 100 which I want to test it in 120.Now how to move this script in 100 to 120.
2.How to use includes in scripts and what is the usage?
Thanks,
K.Kiran.<b>INCLUDE: </b>Include other texts
With the command INCLUDE, you can include the contents of another text into your text. The text to be included exists separately from yours and is only copied at the time of the output formatting.With the INCLUDE command, you always get the most current version of the required text, since this is only read and inserted during the output formatting.
Syntax:
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p] [NEW-PARAGRAPH np]
The name of the text to be inserted must be specified and can have up to a maximum of 70 characters. If the text name contains blanks, then you must put it in quotes as a literal. It can also be specified via a symbol. All further parameters of the INCLUDE command are optional. If they are missing, SAPscript uses default values for them which are based on the respective call environment.
Examples:
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE E PARAGRAPH A1
The text with the name MYTEXT and the language E is included, regardless of in which language the calling text is created. The paragraph format A1 is valid as the standard paragraph for this call.
Optional specifications:
LANGUAGE If a language is not specified, the language of the calling text or the layout set is set for the text to be included. If a language is specified, the text is always loaded in this language, regardless of the language of the calling text.
PARAGRAPH The text to be included is formatted with the style allocated to it. With this parameter, the standard paragraph of this style can be redefined for the current call. All * paragraphs of the inserted text are then formatted with the paragraph specified here.
NEW-PARAGRAPH The first line of the included text has this format flag, provided it is not a command or comment line. If the optional entry PARAGRAPH (see above) is empty, all * paragraphs of the included text are formatted with the paragraph np specified with
NEW-PARAGRAPH.
OBJECT To specify a text completely, you must make further specifications regarding the text object. There are different rules and restrictions for this which depend on the object type of the calling text: All texts can be included in a layout set. If no object is entered here, TEXT is used (standard texts).With a documentation text (object DOKU), you can only include documentation texts. This object is assumed even if no object is specified in this environment. Only hypertext or documentation text can be included into a hypertext (object DSYS). If the OBJECT specification is missing, DSYS is set as a default value.
Only standard text (object TEXT), documentation text or hypertext can be included in any other type of text. The default object is TEXT if nothing is entered.
ID The text ID, which allows further text types within an object, is a further part of the text key. If the ID is not entered, the default Include ID from table TTXID is used for the calling text. If the specification is not in this table, the text ID of the calling text is used.
The ID together with the object are now the basis of a further consistency check:
All text IDs are allowed for a layout set.
Only documentation texts with the text IDs TX (general texts), UO (authorization objects), and documentation texts which have the same text ID as the calling documentation text may be included in documentation texts.
All DSYS texts may be included in DSYS texts, regardless of their ID. Documentation texts to be inserted may only have IDs TX and UO.
Standard texts with all the allowed text IDs, DSYS texts with all IDs, and documentation texts with Ids TX and UO may be included in the other types of texts.
Regards,
Santosh -
I have purchased two movies on the store that at the time were unable to download, due to a full start up disc. I have now freed up the space and the remainder of the movies won't download. It gives me the error code 8003. I have a good network connection and the space for the movies, but cant seem to get it to work. Anysuggestions? It doesnt even let me delete the downloads and start again.
1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2 -
Verizon Screwed-Up the Guide Again
The Guide format changed for the worse again today. As if it wasn't enough to screw it up a few months ago when Verizon applied changes to the way channels were filtered (or not) within the guide; they also added a banner across the bottom of the screen, thereby reducing the number of visible channels by 1. Now, today, Verizon not only changed the format of the channel names (unnecessarily), but they also added a summary detail of the selected channel (which we used to get by pressing the "info" button. This change resulted in the removal of 2 other channels on the screen to make room for the summary. They also got rid of the banner at the bottom of the screen, but they didn't restore the previously removed channel, so now it's just a wasted line that could have shown another channel. Ridiculous. How about some Human Factors assessments? How about some feedback from customers regarding options? I don't appreciate the changes Verizon keeps making to the guide. They're not helpful. Please give us the freedom to select how many channels we can see within the guide at one time. Allow us to select whether or not we want to see the show details in the main screen of the guide. But most importantly, please stop screwing with the guide. Thanks, Rich
Solved!
Go to Solution.I must admit that I came here to vent out of despair that Verizon couldn't help given my last experience - I never thought you all would be so interested in helping me solve this problem. Thank you and I appreciate it!
SinCara, it's a 52" HD set to 16:9, w/ the banner turned off. And it does say FiOSQUANTUMTV in the top right corner. I'm baffled. This morning, I now have 7 channels displayed in the guide and the selected channel is slightly above the center of the screen ... whereas, for the past two days, the selected channel was shifted one position lower, while the guide displayed 1 less channel.
To your point, I do admit that the new guide is easier to read - especially the improved contrast of the selected channel. I just wish it didn't require the summary be shown. I haven't figured-out the AutoHD tune.
Regarding not being able to post a picture, too funny. I use Firefox with NoScript and I intentionally limit the domains from which I allow scripts to run. I hadn't approved "Lithium.com" scripts because the site was functional for me ... but now that I have allowed Lithium.com, the grey menu bar appeared and I see the link to attach photos to my post as well as employing other RTF features.
At this point, I need to declare this as closed/solved. Thank you all for your help - I do appreciate it!
Sincerely,
Rich -
PP Procedure is Missing, Can not Run the Preprocessor
hi experts,
while executing some module program through TCODE. I got this error PP Procedure is Missing, Can not Run the Preprocessor
can any one help me ?
thanks,
nag.Hello,
What I thought you meant when you said "Port" was that you were using a Distribution project to move it to other machines. Therefore you have two options to proceed.
1) Copy the nicppaiu.dll from the system folder on your machine to the system folder on another machine you are "Porting" to.
2) Add a project to your solution that is a Setup project. Then add the output of your application to this project and add the MSM discussed earlier. This will create a MSI that can be used to install your application on multiple machines (it still requires a NI-DAQmx install).
There is a good topic in our help named "Deploying Measurement Studio Applications" that tells you everything you need to know.
Regards,
Jeff -
Missing bottom screw for iphone 4
The left screw beside the dock charger on my iphone 4 is missing. Where can I get a screw for my iphone? Or can i ask from apple store since my iphone is still under the 1 year warranty. I bought my phone thru hong kong online store last June 2011. Will something happen to my iphone since one of the screws is missing?
Your posted question reads as a part of an adult-related joke. If you simply want another threaded fastener (I'm going to great lengths not to use the word "screw"), speak with a Genius at an Apple store, and (s)he might find an extra. If the head (dang!) - I mean the top - of the screw is damaged, and the iPhone still works, leave it alone. Here's the bad news...a damaged screw is a clear indication that you've opened the iPhone and, if the iPhone fails, Apple won't replace it (as an out-of-warranty exchange).
Maybe you are looking for
-
How do I add a site to my home page?
How do I add a link to a special site on my home page?
-
Problem with DAQmx Physical Channel control
Dear LabVIEW community! I have installed LabVIEW, v13.0f02, 32-bit on my PC. The problem, which I face, is that DAQmx Physical Channel controls, which are used in VIs inside the LV projects, sometimes don't show me the list of DAQ devices - I can't e
-
In order to change the area of influence in Blender for proportionsl editting you need to change the curser using the scroll wheel, but i dont have one.
-
Textfile Problem (Very Urgent, Pls Help...)
hi to all, I have a servlet that executes a program and then write the results to a textfile. Question 1: How do I know that the textfile is not empty? Question 2: If the textfile contains somethings, how can I append a sentence(That's all) all the l
-
Loading video to 160gb classic
I can't load video into my ipod library after its been ripped, (istudio & DVD Magic). I have no problem ripping video formats but my library just wont accept it, (simple drag and drop), I already have a 60gb ipod that i have had no problem loading v