Missing Unfiled Colums in Workbook

Hi Gurus,
We are on BI7.0, SP14.
I have created a Workbook with containg different coloumns, some with data and remaining without data. It is found to be working fine.
The problem is:
When I try to do the settings of the Workbook Proparties (Refresh Workbook on open), the unfilled columns (columns w/o data) are found to be missing.
What would be the solution for this, so that I can see all the coloumns (i.e. columns with and without data) even after settings done for the workbook.
Any help will be highly appreciated.
Thanks in advance.
Maruthi

Dear Maruti,
If you have done Cell to cell by just using excel features then you should get those columns without any problem.
There are no special settings for this , unless you are using PIVOT tables and stuff like that.
Can you please let me know how many columns are there in your query and how many are beeing displayed in your workbook.
regards
VK

Similar Messages

Missing height colum! (Table) CS3 Please help

I am using cs3 presently an am having a strange issue.. when a table selected, the width colum comes at right place but the height column is absent (But it was there in drmweaver 8) i do'nt know if others have same prob too..
i know its a small thing but my working style makes it a big thing for me.. every tym i hav to manualy change height i have to shift to code view and change (I doo most of work in design w only..) any hhelp would b appriciated
as you can see the highlighted portion
pardon me for spell mistakes its now morning in my country and i'v been working allnight long..
Thanks

That option was removed from the current versions of DW because Table height is invalid HTML.
A table should shrink or expand to fit whatever content is inside it :-)
Are you trying to set 100% height on tables - then this may help:
http://www.apptools.com/examples/tableheight.php
Nadia
Adobe® Community Expert : Dreamweaver
http://twitter.com/nadiap
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/

BEx Analyzer Workbook as an iView in the Portal

http://help.sap.com/saphelp_nw2004s/helpdata/en/4d/f3fa40badbf36fe10000000a1550b0/frameset.htm
I created an SAP Transaction iView and included the transaction code RRMXP and value WBID=<WORKBOOK_ID> in the Application Parameter property. I've also made sure the AutoStart property contains the value True (process first screen) and the GuiType property contains the value WinGui.
My issue is when the iView is launched without the true statement the RRMXP screen appears with the WBID. I presss enter and the screen flashes but the workbook is never launched. With the Autostart set to true you never see t-code RRMXP the screen flashes then nothing. I'm not sure what's missing to launch the workbook.
Currently on BI 7.0 2004s and EP 2004s
--KAL

Tcode RRMX is no longer valid in SAP BI 7.0. The Security is set to low. Trace file is the following:
BExConnect.Trace3: 0
BExExcelTraceListener.AddTraceListener: Added a tracelistener for Version: 7100.0.461
BExConnect.constructor2: 11.22192
BExMenu.CreateSubMenu1: 0.15586
BExMenu.CreateSubMenu2: 0.46758
ListSeparator: ,
BExConnect.CloseWorkbook: BExAnalyzer.xla
BExConnect.Closed
BExConnect.Dispose: Disposing BExConnect
BExConnect.Dispose: Disposing BExConnect 1
BExConnect.Dispose: Disposing BExConnect 2a
BExConnect.Dispose: Disposing BExConnect 2
BExConnect.Dispose: Disposing BExConnect 3
BExConnect.Dispose: Finsished all the Disposing

Missing worksheet when opening in EXCEL 2013

Hi,
I had an output from our existing ERP system with file type as XLS.
Currently, if open in EXCEL 2010, I am able to view the workbook with multiple sheet.
However, now, in EXCEL 2013, I cannot geth the same result. I get only to view 1 sheet with 1 sheet missing from the open workbook.
Why is this happeneing? No problem in EXCEL 2010.
Please assist.
Bye

Hi,
If this is not a SharePoint related issue, I would suggest you open a thread in the corresponding forum, you will get more help and confirmed answers there.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

"Powermaps needs more resources to complete this operation" error. 2 datasets 100 rows. one tour. two layers

I'm working on some BI mashups to demo the powerbi offerings to potential clients, but I get close to 20+ crashes a day relating to memory issues
I'm utilising powerquery to import and filter data from 2 rss feeds. Each are at most 100 rows. I then add these to a powerpivot model & have two powerview reports over this.
I've added a powermap to the solution but find the reliability to be very poor. If it does manage to work the colours of the bubbles and bars sometimes don't match the defined colours or they're black (a telltale sign of memory problems in windows). This
usually breaks the whole excel 'process' and I can't save the workbook. I get "workbook not saved" errors or that "there was a problem saving with all the features added. Click continue and save as a different file"
either that or i get a hard crash like I did while writing this post:
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   EXCEL.EXE
Application Version:   15.0.4535.1507
Application Timestamp:   52282875
Fault Module Name:   KERNELBASE.dll
Fault Module Version:   6.1.7601.18229
Fault Module Timestamp:   51fb1116
Exception Code:   e0434f4d
Exception Offset:   0000c41f
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   3081
Additional information about the problem:
LCID:   1033
skulcid:   1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Memory amount is not a problem according to resource manager; excel process taking ~500mb and 70% free ram. I left memtest86+ running overnight and it found no errors in 8 passes so it looks like my sticks are ok. I have sql server 2008r2 & 2012
along with all the bells (db engine, ssis, ssas) installed and that never gives me hard memory failures even when I drive it hard. Obviously if i try to process a data model that's too big it gives me out of mem errors but that's expected and it doesn't crash
SSDT or the SSAS\Tabular instance. The services are off while I'm doing the excel powerbi work.
laptop specs are :
OS Name   Microsoft Windows 7 Ultimate
Version   6.1.7601 Service Pack 1 Build 7601
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Manufacturer   Dell Inc.
System Model   XPS L521X
System Type   x64-based PC
Processor   Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2101 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date   Dell Inc. A15, 1/08/2013
SMBIOS Version   2.7
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale   Australia
Hardware Abstraction Layer   Version = "6.1.7601.17514"
Time Zone   Cen. Australia Daylight Time
Installed Physical Memory (RAM)   8.00 GB
Total Physical Memory   7.88 GB
Available Physical Memory   5.67 GB
Total Virtual Memory   15.9 GB
Available Virtual Memory   13.6 GB
Page File Space   8.00 GB
Page File   C:\pagefile.sys
I can upload the workbook too if desired
I dont solely blame powermaps, rendering the powerview reports is pretty hit and miss in all the workbooks i've developed before as well, but clicking the Maps button in excel is certainly the biggest gamble
Jakub @ Adelaide, Australia

Hi Jakub,
I can think of two changes you can make that can help.
1. You don't mention what architecture your office version is. I would suggest you use 64 bit Excel. It has a higher memory threshold and performs much better when using a lot of memory.
2. Install all of the latest CU updates for Office. There has been dozens of bug fixes for PowerPivot and Power View since the last release.
You mention you can share the workbook. Feel free to send to me at
[email protected] and I would be willing to take a look and see if the crashes are known issues or already fixed.
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.

Bug in UpdatableResultSet causes ORA-01747

Hi,
when calling select, it is necessary to put column names colliding with reserved words in double-quotes.
In that case, select works fine, but when the corresponding colum is updated, the latest thin JDBC driver throws an exception in updateRow():
java.lang.RuntimeException: java.sql.SQLException: ORA-01747: invalid user.table.column, table.column, or column specification.
Allways adding the quotes in prepare_updateRow_statement(int _numColsChanged) seems to fix the problem (see below), but it may introduce a new problem with case (in)sensitivity (?)
original code (guess based on the bytecode):
if(j > 0)
updateSql.append(", ");
updateSql.append(
getInternalMetadata()
.getColumnName(m_idxColsChanged[j] + 1));
updateSql.append(" = ? ");
fixed:
if(j > 0)
updateSql.append(", ");
updateSql.append('"');
updateSql.append(
getInternalMetadata()
.getColumnName(m_idxColsChanged[j] + 1));
updateSql.append("\" = ? ");
I must admit that I am not very happy with the quality and compatibility of the drivers. Yesterday I had to spend a lot of time to figure out that Oracle had taken the freedom to rename the SQL92 standard scalar function "position" to "instr". Of course this would have been a lot easier if the exception would not have said something useful instead of "right parenthesis missing" or "colum not found" (keeping the actual name of the "column" a secret).
Today I had to learn that when calling 'select("*")', it is not possible to move to the insert row. Again, the error message did not say "sorry, we took the freedom not implement moveToInsertRow() for select *" (which at least would have made the workaround obvious), but "table is read only".
Perhaps forcing developers to install two different open source alternatives to distinguish between own bugs, incompatibilities and Oracle issues is not the best idea to keep them loyal.
Best regards
Stefan Haustein

Hi,
when calling select, it is necessary to put column names colliding with reserved words in double-quotes.
In that case, select works fine, but when the corresponding colum is updated, the latest thin JDBC driver throws an exception in updateRow():
java.lang.RuntimeException: java.sql.SQLException: ORA-01747: invalid user.table.column, table.column, or column specification.
Allways adding the quotes in prepare_updateRow_statement(int _numColsChanged) seems to fix the problem (see below), but it may introduce a new problem with case (in)sensitivity (?)
original code (guess based on the bytecode):
if(j > 0)
updateSql.append(", ");
updateSql.append(
getInternalMetadata()
.getColumnName(m_idxColsChanged[j] + 1));
updateSql.append(" = ? ");
fixed:
if(j > 0)
updateSql.append(", ");
updateSql.append('"');
updateSql.append(
getInternalMetadata()
.getColumnName(m_idxColsChanged[j] + 1));
updateSql.append("\" = ? ");
I must admit that I am not very happy with the quality and compatibility of the drivers. Yesterday I had to spend a lot of time to figure out that Oracle had taken the freedom to rename the SQL92 standard scalar function "position" to "instr". Of course this would have been a lot easier if the exception would not have said something useful instead of "right parenthesis missing" or "colum not found" (keeping the actual name of the "column" a secret).
Today I had to learn that when calling 'select("*")', it is not possible to move to the insert row. Again, the error message did not say "sorry, we took the freedom not implement moveToInsertRow() for select *" (which at least would have made the workaround obvious), but "table is read only".
Perhaps forcing developers to install two different open source alternatives to distinguish between own bugs, incompatibilities and Oracle issues is not the best idea to keep them loyal.
Best regards
Stefan Haustein

Issue after BI statistics activation in ST03N

hi gurus,
wE HAVE ACTIVATED bi statstics but cube 0tct_c01 is getting zero delta records everyday & also we are not getting any statistics data for infocube/reports in ST03N only i can see statistics for PROCESS CHAINS/infopackge/DTP
Can anyone help me here ? Is there any SAP note that can rectify this situation.
thanks
nilesh

Hi Pathak ,
1. Check the tables RSDCUBE and RSUPDINFO for the Infocube - 0TCT_C01 and make sure the TIMESTMP are same for the infoprovider . If they are not same , then re-activate the update rule from the content.
After that try to make a new init/load and make sure the init loads are green and then check the results.
2. Maintain the necessary parameters for collecting the statistical data properly .
You can refer to note-1237091 (Enhancements to Query Runtime Statistics of BI Admin Cockpit) for it .
3. If still , your issue is not fixed , then apply the notes -
1317483 - (BI Application name missing for 3.X Workbook and Templates)
1472057 - (AC:Extractor Modification: Virtual Cube call and init loads)
Regards,
Lokesh

Problem in RRX_GRID_CMD_PROCESS fm

hi expert's
i am using rrx_grid_cmd_process function module in my development, in this internal table is e_t_grid having the data.
actually in this table i am getting 255 colums data, actually i have 300 colums data in my query report, i am missing remaing colums in my internal table , how can i get it remaining.
please any one know , give me response.
thanks in advance

Hello. Not sure this will help you much, but figured I would give you my thoughts. I have never seen official documentation on SAP FMs. For me, it's been a matter of figuring what is there and how they work, as needed.
Mainly, I would just look at the source code to get an idea of what the FM is doing. Then also find where the FM is being called from other programs/FMs. That would give you an idea of how other processes are utilizing the FM as well as what they are passing and how they are handling the returned data.
Maybe others know if actual documentation, but I have never seen it and usually just figure them out as mentioned above.
Thanks

Error during activation of BI content

HI,
Can anyone help me here as i am getting error while trying to activate BI content through SPRO in BW
The job RSTCC_ACTIVATEADMINCOCKPIT_NEW is excuted in background and its getting cancelled.
Also giving me dump in ST22 as Assertion failed,
if any one can help me here it would be great
thanks
nilesh pathak

Hello Nilesh,
I have seen the problem before when the following notes were not applied:
1317483 - BI Application name missing for 3.X Workbook and Templates
1330447 ASSERT incorrect when RRI jump targets are activated
Can you please apply the notes in your system and check if the problem is resolved?
Kind Regards,
Des

Workbook Text Elements are missing After Upgrade to BI7.0

Hi All
I am unable to see "Text Elements" in Workbook which is migrated from BW3.x to BI 7.0.
I am using Windows XP, MS-office 2007, GUI 710 FEP5.
workbook is working fine with Bex 3.0
I had checked all the pre- requisite for BI 7.0 and BEx .
Please advise me.
Regards
Vivek Tripathi

This is an Known issue while upgrading WB's to BI7 and we have posted the same to SAP.
Try this procedure,
Open your 3.x Wb in BI7-bex - Click okie on Bex upgrade popup.
Click on change variables in your WB now and enter necessary variable values.
Now save you WB in BI7-Bex . Try re opening the same WB,
You have to see your text elements now after refresh.
if u save the same WB, w/o refresh or change varaibles, you will again miss text elements.
The below is the reply from SAP.
" As following to our call, I was able to open the workbook sap_test2( test WB that SAP has created in our system to replicate the problem) and to refresh it in the latest patch 17. However after saving it without
refreshing it, I was not able to open the workbook. so we are investigating the issue.however as temporary workaround you can the following
1. Eenable the "Refresh workbook on open" property. this will prevent
user from saving workbook without refreshing
2. You can apply a ABAP note which disallow users to upgrade 3.x
workbooks. But the note is currently in pilot released."
Ohoo, I think you are from Satyam..the above is the latest info that we got from SAP.
Regards
KK
Edited by: Chivukula on Aug 11, 2008 3:40 PM

Missing workbooks

Howdy Gurus,
We have some workbooks that appear to have gone missing. These comprise about 4 workbooks from two totally unrelated infocubes that were working fine on Friday, and on Monday we cannot find them if we search for them in BEx. People that had run them in the past and had them in their BEx History get the following error when they try to run them from their History:
document store operation failed due to missing authorizations
Heres the troubleshooting Ive done so far:
I dont believe its an authorization issue because the user that got this error has the SAP_All profile, and when I look in SU53 for this user there are no authorization errors. People could run these workbooks fine a few days ago, and no changes were done to the roles since then.
I dont believe the workbooks have been deleted because we can find them if we look in the Metadata Repository, and one has a last changed date of a month ago.
These workbooks have been under development for the past couple of months directly in our production system, so there should be no transport issues.
Were running BW 3.5 on Oracle 10g.
Ive never run across this before, and Im not sure where I should look next. Can anybody point me in the right direction?
Thank you very much!

Hi,
when you did not transport any workbooks or queries how can you find them in prod.
If that is not the case check....
RSRWORKBOOK(table)- if you have workbook ID
RRMX_WORKBOOK_LIST_GET -function module
hope this helps you.....
Message was edited by: AVR - IGA

Workbook: Document store operation failed due to missing authorization

Hello authorizer gurus,
I have got 3.5.
I have transported.
I try to open a workbook.
I am getting a Error Message:
Document store operation failed due to missing authorization
Newly saved Queries as workbook can be openend.
What's wrong ?
Thank You
Martin Sautter

Martin,
To get a detailed message about the error (including which authorization objects the user needs to have to be able to perform the action that caused the error) use ST22. It sounds like they are missing the Open authorization for workbooks.
Cheers,
Rusty

Missing workbook text elements

Hello,
After upgrading to BI7 we are experiencing an issue with the missing text elements. We use workbooks with a sheet to receive the query and then a macro to reformat the query to user display form. The query sheet generally has a text element area and then a data area. When building the workbook we select the text element object and turn on all the text elements, this makes debugging easier and sometimes the text elements are used in the end report. Randomly after saving the workbook the text elements are turned off and on subsequent executions they are not displayed. The workbook then requires modifications to turn on the text elements, save the workbook and then transport.
Any thoughts would be appreciated.
Thanks,
Rick

Hello,
After some testing of the fixes that were applied we are still experiencing the issue with disappearing text elements.
Any additional information or recommendations would be appreciated.
Thanks,
Rick

Missing join in workbook

Client exported a business prior to making modifications. The modifications were not going well, so they restored by importing the business area. During import, the selection was made to rename the existing objects. So now there are 2 BAs "BA" and "BA 1". BA is the pre-modification business area, and "BA 1" contains the modifications. The client then deleted "BA 1" thinking everything would be restored prior to the modifications.
They aren't. To further complicate things, several folders in the business area were shared with other business areas (so now there are "Folder 1" objects all over the place). When users open workbooks, they are getting the error:
Cannot join tables used in the workbook. Join "" not found in the EUL.
Running the workbook dump utility (d51wkdmp) throws:
DCEException - Internal EUL Error: InvalidId - Failed to find EUL element by id
Any ideas on how to find out which join(s) are missing, or a way to gracefully back out the export/import that took place?

Boy, what a mess. I am thinking if it would be possible to delete business areas BA and BA1, then reimport the pre-modification business area. The concern I would have is if the folders in this business area BA are also used in other business areas. If just BA and BA1, then I think you would be okay. But if used in BA, BAC, BAD, BAE, and so forth, then you have to be careful.
When they deleted business area BA1, do they remember what option they selected? Was it delete the business area and its folders option? Kind of sounds like that is what happened. If you do that and the folders are used in other business areas, they should not get removed. But since you did the rename option on the import, those existing folders would have been renamed and if not used in any other business area, would have been deleted.
The problem is that Discoverer tends to work off its internal id values, not the names. So the original folders and joins and stuff would have had unique internal id values that your workbooks are looking for. The reimported business area, though it has the right names, would have new internal id values, that the workbooks do not know about, and thus the problems you are having now.
Now I admit that is guessing on my part. I know the internal id values are there and would be unique. Exactly how Discoverer tracks its join usage in workbooks, that part I have never seen any documentation on.
This may be something where you want to log a service request with Oracle support and see what they suggest on how to best recover from this situation. Those would be the folks who would best understand the internal (behind the scene) workings of Discoverer.
Good luck.
John Dickey

Local Workbooks Missing under Favorites

Hi BW Gurus
We have upgraded to NW2004S SP12 and found old workbooks(local) are missing (under favorites) even after activating Personalization in BEX (SPRO).
The workbook tables has all the local workbooks in the corresponding tables(RSRWBINDEX,RSRWBSTORE) but it is not displaying when you click on Favorites in the BEx for WORKBOOKs.
I never faced this issue with SP7 & SP9.
I really appreciate if someone can share their knowledge or solution.
Thanks in advance.
Prasad

Hi Deepu
Thanks for taking your time to reply to this message.
I looked in to the table and these are my findings.
SMEN_BUFF has zero records
SMEN_BUFFI has 15 records
SMEN_BUFFC has >400 records.
The userid who complained about missing workbooks has couple of entries in
SMEN_BUFFI & SMENBUFFC tables.
Can you please explain me what are these tables ? and what should i look for ?.
Thank you once again.
Regards
Prasad

Missing Unfiled Colums in Workbook

Similar Messages

Maybe you are looking for