Missing worksheet when opening in EXCEL 2013

Hi,
I had an output from our existing ERP system with file type as XLS.
Currently, if open in EXCEL 2010, I am able to view the workbook with multiple sheet.
However, now, in EXCEL 2013, I cannot geth the same result. I get only to view 1 sheet with 1 sheet missing from the open workbook.
Why is this happeneing? No problem in EXCEL 2010.
Please assist.
Bye

Hi,
If this is not a SharePoint related issue, I would suggest you open a thread in the corresponding forum, you will get more help and confirmed answers there.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Outlook 2013 XLS Attachments cannot be opened in Excel 2013 due to Trusted Center restrictions with Outlook Secure Temp Folder

Dear all,
I'm having some serious issues with Office 2013's Trusted Center settings. In Outlook 2013 XLS Attachments cannot be directly opened in Excel 2013 with double-clicking due to Trusted Center restrictions for Excel 2013 regarding Outlook's Secure Temp Folder.
I tried to adjust the corresponding Office 2013 Administrative Template within my GPOs but to no prevail.
I did find out that Outlook 2013 places an attachment within the Outlook Secure Temp Folder located at "C:\Users\a.ollischer\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\PPIU10RW” before passing it to Excel 2013 in order to
open it. It fails due to not trusting this location though I added the corresponding path to my Trusted Locations.
What can I do in order to make this work without having to tediously save each and every attachment to "My Documents" prior to opening it? Any help would be greatly appreciated.
Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

Hi Maurice 7785,
Deal and customize attachment security behavior to access such kind of blocked file format. Usually, Outlook does not allow users to open such unsafe type of attachments. It means they are blocked them by default, so you need to unblock such items using REG
values.
Take more help from the similar thread:
http://social.technet.microsoft.com/Forums/en-US/53563c4b-d27f-4866-a5a8-95eb1ad1a3e6/hide-attachements?forum=outlook
Note: Improve community discussions by marking the answers helpful otherwise respond back for further help.
Thanks
Clark Kent

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

The activated fonts are not the same version as those in the PDF. If you use Type>Find Font and replace the fonts with ones from your computer does it work?

"Last modified" attribute changes when opening a Excel-document

Hi
We are running Server 2008 R2 as terminal servers and fileserver.
When opening an Excel document stored on the fileserver so changes "date modified" at the opening regardless if you save the document or not. This is a problem for users who want to keep track of when the document has been changed "for real".
Now, "last modified" changes when the document was last read instead, this confuse the users...
If we test the same procedure on our older terminal server environment, Server 2003 or on our clients (Windows 7) it works how we wanted. The "last modified" only changes when you save the document, and not when you are opening it. Office
2007 is installed on both our new terminal server environment (Server 2008 R2) and the old one (Server 2003).
Can someone explain to me why it behaves like this? And if anyone got a solution? It's only occur on Excel-documents and not the others Office documents...
Thanks in advance

Hi tomburken,
It seems that this is not a server issue .
This issue may due to the " automatically save " executed by some office scripts .
To get the accurate assistance please post this issue to Microsoft office forum :
http://social.technet.microsoft.com/Forums/zh-CN/home?category=officeitpro&filter=alllanguages
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What is the maximum file size for CSV that Excel can open ? (Excel 2013 64bit)

Hello,
Before anyone jumps in, I am not talking about the maximum worksheet size of 1048576 rows by 16384 columns.
I have client whom has a 1.5 Gb CSV file, 1.9, 2.6, 5, 17 and 89 Gb file (Huge).
If I open the 1.5 Gb, the file opens (After waiting 5 minutes) and then a warning pops up that only the first 1048576 rows have loaded. That is fair enough.
If I try and open any of the others, Excel comes up to a blank worksheet. No errors. It just seems to ignore the file I tried to open. This happens from within Excel (File - open) or from double clicking the file in explorer.
Excel goes to this blank page almost imeadiatly. It does not even try to open the file.
If I try with Ms Access, I get a size warning and it refuses to load the file. (At least I get a warning)
I would have expected Excel to load at least the first 1048576 rows (If that is what there are in the file), and give an error.
The computer is more than capable (Xeon processors, 16 Gb ram, SSD hard disks top of the line HP Z820 power workstation).
With the 1.5 Gb file loaded to 1048576 rows, it uses 15% ram/pagefile. CPU's hit about 5%.
I have confirmed it is Win 7 64bit, Excel 64bit. I am fairly confident we are over the file size but without an error message, I don't know what to tell my client whom is looking to me for answers.
I have already discussed that the 89gb file in Excel is unreasonable and they are looking at a stat's package but I need an answer on these smaller files.
Anyone got any ides ?
Michael Jenkin (Mickyj) www.mickyj.com (Community website) - SBS MVP (2004 - 2008) *5 times Microsoft MVP award winner *Previously MacWorld Australia contributer *Previously APAC Vice Chairman Culminis (Pro IT User group support system)* APAC chairman GITCA
*Director Business Technology Partners, Microsoft Small Business Specialist, SMB150 2012 Member

Hi,
The 1,048,576 rows & 16,384 columns is the
workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles:
http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Passworded Excel 97-2003 file will not open in excel 2013

I can not open a file that I have saved as a passworded 97-2003 excel file using excel 2013. When opening the file, it will ask for the password, I put in the password in, and excel freezes and then has to clkose because it will not open the file.
The file is NOT corrupt and will open on my computer with Office2007. I can actually create a passworded file with excel 2013 but save it as a 97-2003 version, but when I try to open that file it will not open either?
Please explain to me how I am suppose to get the information off my 97-2003 file on this excel 2013 version??????
AGAIN the file is not corrupt and I don't want to open my file with my 2007 version machine, I want this passworded 97-2003 file to open with my excel 2013 machine!!!!!!!
Please send me a fix to this, and I've check the forum. None of the work around options work. NONE, I've checked them all.
This only appears to be a problem with a passworded 97-2003 file. If it's not passworded it opens.

Hi,
I have not been able to reproduce as I am able to open password protected .XLS Binary Format Files with Excel 2013. Can you provide more information?
Also, I don't believe this is a SharePoint Question?
-Ivan
-Ivan

Using vlookup btwn worksheets when using ActiveX Excel

I am having problems using the vlookup function in Excel. It works fine if I have the lookup table on the same worksheet that's already open in LabVIEW. I first open an excel file that I use as a template. I copy the header and formula information from that file into an activeX container containing an Excel worksheet. I then allow the analyst to enter data into the ActiveX Excel spreadsheet. Meanwhile, I create a log template by creating a text file with headers. When the analyst is done entering data on the front panel, they click on the Update/Print Label button. This appends their data (a range of cells) to the text file (which is then formatted and saved using report generation tools) and it's printed to a label. The problem is on the front panel ActiveX Excel sheet. The original excel sheet used as a template has many formulas, all of which work well in Excel, as well as in the LabVIEW app, with one notable exception. One of the cells contains a formula that uses a vlookup function. The problem is when I place that lookup table on a different worksheet. It works great if I place the lookup table on the same sheet as the template, but when I try to reference a different sheet, I get an error. I'm assuming that I just need to add code to open the second Excel spreadsheet (or better yet - a separate workBOOK). I was confused at first, because the vlookup function worked fine in Excel, but not in LabVIEW. Then I realized that Excel already had all the worksheets in the workbook open, but LabVIEW does not. Am I correct? If I want to use a vlookup to look on another worksheet or another workbook, do I just have to open that second workbook/sheet in LabVIEW?

Hi Dan,
You are right. LabVIEW does not have the other worksheets open. I think that you are on the right track. I recommend opening another worksheet and testing it out. LabVIEW should stop giving you an error when you do.
Nick Keel
Applications Engineering
National Instruments
Nick Keel
Product Manager - NI VeriStand and Model Interface Toolkit
National Instruments

Error when opening exported Excel document

hi,
i'm using the following to let the user export JSP to Excel file:
response.setContentType("application/download ");
response.setHeader("Content-Disposition","attachment; filename=test.xls");
problem happens only for the first when i try to open the file in excel.
Excel gives me " 'test.xls[1]' could not be found. Check the spelling of the file name, and verify that the file location is correct. ...."
Subsequent tries work fine with no problem.
i noticed that Excel is trying to open a file with a different name, appending [1], which obviosuly doesn't find in its first try.
i would appreciate any kind of clue.
thank you.

I got this from a different post on this forum.
Basically, on your JSP page which you want to export to Excel, set the content type and header as below. Then the browser(Internet Explorer) will try to open the excel document in itself.
<%
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-Disposition","attachment; filename=" + "test.xls" );
%>
<HTML>
<head>
<title>Excel Compatible HTML</title>
<style type="text/css">
td.currencyCustom { mso-number-format:"$#,##0.00_);[Red]($#,##0.00)"; text-align: right; }
td.currencyDefault { mso-number-format:"Currency"; text-align: right; }
td.integer { mso-number-format:"#,##0_);[Red](#,##0)"; text-align: right; }
td.percent { mso-number-format:"%0.00"; text-align: right; }
</style>
</head>
<body>
<table summary="Excel formats supported" width="500">
<tr><td colspan="2"><h1>Excel Compatible HTML</h1></td></tr>
<tr><td colspan="2"><p>This is a simple demo of how HTML tables can be extended
by using CSS styles recognized by Excel 2000. I haven't yet
been able to find any documentation on these styles. Most of this was
derived by saving a simple spreadsheet using the <i>Save as Web Page ...</i>
option then experimenting with formats using the <code>mso-number-format</code>
CSS attribute.</p>
<p>Excel will convert unformatted numbers to the specified style so formatting
them isn't required if the output is only to be used by Excel. Otherwise, they
should be formatted to display correctly in browsers.</p>

</td></tr>
<tr><td>12,345.60 with class="currencyCustom":</td><td class="currencyCustom">12,345.60</td></tr>
<tr><td>12345.6 with class="currencyCustom":</td><td class="currencyCustom">12345.6</td></tr>
<tr><td>-12,345.60 with class="currencyCustom":</td><td class="currencyCustom">-12,345.60</td></tr>
<tr><td>-12345.6 with class="currencyDefault":</td><td halign="right" class="currencyDefault" x:num="-12345.6">($12,345.60)</td></tr>
<tr><td colspan="2"> </td></tr>
<tr><td>123456789 with class="integer":</td><td class="integer">123456789</td></tr>
<tr><td>-123456789 with class="integer":</td><td class="integer">-123456789</td></tr>
<tr><td>123,456,789 with class="integer"</td><td class="integer">123,456,789</td></tr>
<tr><td>-123,456,789 with class="integer"</td><td class="integer">-123,456,789</td></tr>
<tr><td colspan="2"> </td></tr>
<tr><td>%100.00 with class="percent":</td><td class="percent">%100.00</td></tr>
<tr><td>%43.21 with class="percent":</td><td class="percent">%43.21</td></tr>
<tr><td>1.0 with class="percent":</td><td class="percent">1.0</td></tr>
<tr><td>0.4321 with class="percent":</td><td class="percent">0.4321</td></tr>
</table>
</body>
</html>
Currently, i'm trying a different approach.
I'm using POI from jakarta site to create Excel file manually.
here's a snippet of my code in my web request handler that creates an Excel file.
String exportType =(String) request.getParameter("export_type");
if(exportType!=null && exportType.equals(WebConstants.EXPORT_TYPE_MS_EXCEL))
HSSFWorkbook workbook = new HSSFWorkbook();
HSSFSheet sheet = workbook.createSheet("Test Sheet");
HSSFCell cell = null;
HSSFCellStyle cellStyle = workbook.createCellStyle();
HSSFFont font = workbook.createFont();
font.setColor((short)0xc);
font.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
cellStyle.setFont(font);
HSSFRow titleRow = sheet.createRow((short)0);
cell = titleRow.createCell((short)0);
cell.setCellValue("Order ID");
cell.setCellStyle(cellStyle);
cell = titleRow.createCell((short)1);
cell.setCellValue("Order Time");
cell.setCellStyle(cellStyle);
for(short i=0; i<blotterModelList.size(); i++)
BlotterModel model = (BlotterModel)blotterModelList.get(i);
HSSFRow row = sheet.createRow((short)(i+1));
row.createCell((short)0).setCellValue(model.getOrderId());
row.createCell((short)1).setCellValue(model.getOrderTime());
ServletOutputStream stream = response.getOutputStream();
response.setContentType("application/vnd.ms-excel");
workbook.write(stream);
stream.flush();
stream.close();
Sir: I am having touble with my excel exporting.
Could you show me what you are doing and I can go to
school on it? Thanks!

PDF exported from InDesign missing background when opened in Illustrator

Hello, I am having a bit of a frustrating problem.
I'm working on graphics for a large project, and I have to get some of my files from InDesign into Illustrator (they are both CS5) for our printer.
I would have normally designed them in Illustrator but ALL my graphics are in InDesign and we just found out once we started on production that he needs AI and needs our trim path set up for our irregular shapes.
For MOST of the documents, its been pretty easy (exporting to PDF > opening in illustrator and making a cut path > saving as AI) however I have this one file that is making me lose my mind.
When I export it as PDF, it opens perfectly and looks normal in acrobat, and I also check it out in preview as well. The background shows up and everything. However when I open the PDF in illustrator it completely loses the background. I noticed it doing this before for a couple graphics, but I assumed that was because they had gradients drop shadows and transparencies and all that. This file has nothing weird except for a gradient grey background.
Help? I'm including some screenshots of whats happening in the hopes that you guys can help solve it.
So here we have me saving it, then opening it in Acrobat to check stuff out.
Now here is what happens when I open it in Illustrator:

Hi, Brie. I have been running into this issue for quite some time now. I also received the same response as you did. "Stop opening exported PDFs in Illustrator." This is an unsatisfactory answer for someone that works in the large format print industry that needs to preflight directly in the Illustrator program. I've done a ton of research and have been racking my brain for the last 2 years and have finally found sufficient workarounds for this issue. The downfall with these workarounds: all spot colors located in the gradients will convert to CMYK mixes. I'm still researching to see if there is a way to keep spot colors intact in these areas.
A little back story: InDesign is converting the gradients into something called NChannel. It enables more accurate handling of color blending by including additional dot gain and color mixing info. Both InDesign and Acrobat have the ability to display these elements whereas Illustrator, from what I’m finding, does not. Which is why we’re seeing gradient elements drop out when opened in Illustrator.
Workaround for CMYK Gradients
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: DeviceCMYK
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select DeviceCMYK in Color Spaces then click ok
Save the PDF
Workaround for 1 Spot Color in Gradients (Converts Spot Color located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the Spot that is located in the Gradient in Color Spaces then click ok
Save the PDF
Workaround for 2 Spot Colors in Gradients (Converts Spot Colors located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the DeviceN spot color that is located in the Gradient in Color Spaces then click ok
Save the PDF
Please try this and let me know if you have any questions! I'm always looking for new problems to solve! Good luck!
- Jenny

Hierarchy selection missing in member selector with Excel 2013 and EPM SP21

Hello all,
We have recently upgraded to excel 2013 and EPM SP21. While running a data manager package we are not getting an option for "hierarchy" view, only "list" view is available in member selector dialog box as shown below:
This clearly looks to be an issue with the upgrade as we never faced this earlier.
Please suggest.
Thanks,
Dolly Katyal

Look here:
You have:
Remove INPUT:
And you will have hierarchy view!
Vadim

SSRS 2008 R2 - Missing Data when Exporting to Excel or CSV (Row Count is 500)

Hey Folks,
When exporting SSRS 2008 R2 report to an csv or excel file not all the rows are being exported. Any suggestions on why this is occurring. The number of rows is less then 500 and it seems to be a pretty straight forward export. Any help is
greatly appreciated. Inherited this and not sure if this would be configuration issues or something else. It is happening on a number of reports.
Thanks.

Hi Humbly,
According to your description, when you export report into CSV or Excel format, some rows are missing.
In your scenario, since you are missing data “rows” in your exported file, we are guessing if you have any visibility setting like toggle which hide those records. It’s possible that you have set toggle or visibility in your report. After exporting
Excel/CSV, some data might not appear properly. In SSRS 2008 R2, it has reported this kind of issue about data missing after exporting. However, those scenarios are not exactly same as your issue. It mostly turns out be conflict between data and “layout render”
and related to DataElementOutput property. DataElementOutput property controls export behavior, it indicates which report item data should appear in Excel/CSV render. For more information, please refer to this article: Reporting Services:
Why aren’t all my report columns exporting to CSV and/or XML?.
As we tested in our environment(SSRS 2008 R2), no matter what we export into CSV or Excel, we get same results as in BIDS . So I would like to know your report design structure. If possible, please provide some screenshots about results in BIDS and Excel/CSV
render extension results. It may help us find out the root cause of your issue. Thank you.
Best regards,
Qiuyun Yu

HT202879 How do I fix "the required index.xml file is missing?" when opening Pages documents?

I can't open any documents from my son's iPad. Error message: the required index.xml file is missing. How do I fix this error so that I can open his Pages documents? Before I ran the latest update as prompted when I opened Pages, I WAS able to open and view the document.
I did try restoring Pages using my Time Machine, but it still won't open the Pages document.
I have a brand new iMac that I just set up last week.
Son uses iPad at school, so we update when the school asks him to update. Will doublecheck his version of Pages but it should be pretty recent.
In general I don't like using Pages because it lacks a lot of the backwards / forwards compatibilty of Microsoft Word.
However, it is what my son uses with the iPad.
Most of the time I have to export his files as WORD files because we never seem to have compatible versions of Pages between the iPad and the desktop iMacs.
Where can I recommend that Apple improve its compatibility issues with Pages?
This week I am going to receive a new iPad at my school (I am a teacher) but I am 100% certain that it will not be compatible with the older version of Pages on my classroom iMac. I also avoid using Keynote for the same reason. I have 15 year old Power Points that I can still open, but I am hesitant to switch over to Keynote because I want to be able to open my files any time, any where.
Please advise.

Not sure what v5 is. Someone helped me and opened it through Pages 5.2, through the program, rather than the Finder. Thanks for making a suggestion!

Bug : Invalid file extension error when opening exported excel

Hi All,
In one of my jsff page, i have implemented 'exportToExcel' functionality through a exportcollectionactionlistener on a table to export its data to excel. When i try opening the generated excel, i get the following warning in excel 2007 :
"The file you are trying to open, 'Export.xls,' is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?" - When I clicked YES to the message, the exported excel opened and data is present.
How can i get rid of this warning message, because it is annoying for any user to click YES every time the excel is opened ? I am using jdev version 11.1.1.6.0 This is my code :
<af:commandToolbarButton text="Export to Excel" id="cb1">
<af:exportCollectionActionListener exportedId="t1"
                           type="excelHTML"
                           filename="Export.xls"
                           title="Excel export"/>
</af:commandToolbarButton>I found a similar forum post here File format of exportCollectionActionListener ADF 11g But they are suggesting a registry fix which is not possible in production environment.
Any possible workaround or suggestions to resolve this issue is much appreciated.
Thanks

You can save the data on the client and the check the data.
Have you considered using POI to generate real xsl workbook files?
Timo

Missing keyframes when opening fla-file

I am working freelance on an animated show for children, animating characters in flash, and I have a problem that is driving me crazy.
I will try to explain it so it won't be too confusing..
This just happened on the file I am working on now, an animation of a character walking: The graphic symbol containing the legs had two keyframes in it (on frame 1 and 2) when I saved the file. When I reopened it, the legs had only keyframes on frame 1. When I check the swf I exported just before saving, the legs are fine.
Similar problems has happened many times now, sometimes keyframes are gone, other times they have turned blank, and on one occation graphic symbols had changed to empty movie clip symbols. The last swf exported has always been okay.
It has also happened when closing and immediately reopening, so I have ruled out sabotage..
I am using Flash 5.5, but the scenes are handed out by someone working in Flash 3 or 4. I import characters frome different documents into the scene. This often leads to many graphics symbols with the same name, but I make sure to put them in different folders, and also sometimes renaming the symbols. I suspected that could be the problem, but it doesn't seem to have been the case this time.
No one else on the team have experienced the same, though I am the only one working in Flash 5, if that matters.
Any clue, anyone?
Help will be much appreciated!
Thanks

Hi Rekeguf, hi Adobe.
The problem mentioned here is a very serious issue with Fash CS5 and Flash CS5.5 which we (a huge agency working a lot with Flash CS5) haven't found a solution for, yet.
The problem can be described as simple as the following:
You create an animation in some movieclip, save the file, close it, reopen it, and the movieclip is still there, but the animation is gone!!!!
Or: You change the animation in some movieclip, save the file, close it, reopen it, and the changed animation is gone, only the old state is in the movieclip.
Or: You have a movieclip containing only a simple PNG file. The PNG file is changed externally, you reimport it to the movieclip, deleting/overwriting the old one, save the file, close it, reopen it, and the old PNG is in there again, the changed one not even in the library or somewhere else.
Or: You have a movieclip containing only a static text field. You change the text in the textfield, save the file, close it, reopen it, and guess what, the old text is in there.
These problems occur totally randomly!!!! Sometimes they occur, sometimes they don't. Sometimes only one movieclip was affected, sometimes several ones. Sometimes it's only a small thing missing, like a text in a textfield, like a PNG that can be easily replaced, but often enough it's a whole timeline animation which we worked on for several hours.
This is almost like not being able to save at all!!!!
But hey Adobe, we already found a really decent workaround to avoid this problem your happy software confronts us with!!!
The trick is: don't close the file you're working on, don't close flash either, and don't turn off your computer over night. EVER! Leave everything open until the project is finished and payed for by the client.
Seriously, we're thinking about claiming our money back, aswell as the extra money payed to the electricity company for keeping the computers running all night. Let alone those hundreds of hours of work wasted for nothing but the excitement.
If you're interested, i can show you a screen capture of one of these problems occuring.
We're working mainly on MacOS 10.6 , but the problem seems to have occured on different operatings systems like Windows7 aswell.
And before you ask: it changes nothing if we save the file on a server or locally or create 10 backup-copies.
Why is this bug still out there if it's such a big thing!?

Adobe Reader XI freezes computer when opened from Excel hyperlink

My computer has been frozen multiple times after opening a pdf from a hyperlink in Excel. Sometimes it randomly freezes after reading the document for a while and sometimes it freezes when I try to close the document. I have Adobe Reader XI 11.0.06, I'm using Windows 7 Home Premium 64-bit OS, and Excel 2010. The mouse will still move sometimes once things freeze up but clicking doesn't work and alt+ctrl+del doesn't bring up task manager either, so I have to hard reboot. Anyone have a fix for this?
Thanks in advance.

The first thing I would try is to disable Protected Mode in Adobe Reader [Edit | Preferences | Security (Enhanced)].

Missing worksheet when opening in EXCEL 2013

Similar Messages

Maybe you are looking for