Missing WTC classes???

I think I must be going mad.
I'm upgrading an application from WLS8.1 to WLS10 and I can't find classes like weblogic.wtc.jatmi.Ferror and weblogic.wtc.jatmi.TypedFML32 in the weblogic.jar file.
Any idea where they are hiding?

There are a huge number missing - here's a comparison of the weblogic.wtc.jatmi package with a WLS9.2 jar file
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/
weblogic/wtc/jatmi/AaaTcb.class
weblogic/wtc/jatmi/AppKey.class
weblogic/wtc/jatmi/ApplicationToMonitorInterface.class
weblogic/wtc/jatmi/BEAObjectKey.class
weblogic/wtc/jatmi/BetaFeatures.class
weblogic/wtc/jatmi/BindInfo.class
weblogic/wtc/jatmi/CallDescriptor.class
weblogic/wtc/jatmi/CalloutTcb.class
weblogic/wtc/jatmi/ClientId.class
weblogic/wtc/jatmi/ClientInfo.class
weblogic/wtc/jatmi/CodesetTcb.class
weblogic/wtc/jatmi/ComposFmlTcb.class
weblogic/wtc/jatmi/ComposHdrTcb.class
weblogic/wtc/jatmi/Conversation.class
weblogic/wtc/jatmi/ConversationReply$1.class
weblogic/wtc/jatmi/ConversationReply$LockReq.class
weblogic/wtc/jatmi/ConversationReply.class
weblogic/wtc/jatmi/Decimal.class
weblogic/wtc/jatmi/DefaultUserRec.class
weblogic/wtc/jatmi/DequeueReply.class
weblogic/wtc/jatmi/DomainOutboundConversation.class
weblogic/wtc/jatmi/DomainRegistry.class
weblogic/wtc/jatmi/DynamicFldTbl.class
weblogic/wtc/jatmi/EngineSecError.class
weblogic/wtc/jatmi/EnqueueRequest.class
weblogic/wtc/jatmi/FML.class
weblogic/wtc/jatmi/FViewFld.class
weblogic/wtc/jatmi/Ferror.class
weblogic/wtc/jatmi/FldTbl.class
weblogic/wtc/jatmi/FmlKey.class
weblogic/wtc/jatmi/GatewayTpacallAsyncReply.class
weblogic/wtc/jatmi/HTableParser.class
***** \TEMP\WLS10.TXT
weblogic/wtc/jatmi/
weblogic/wtc/jatmi/AppKey.class
weblogic/wtc/jatmi/BEAObjectKey.class
weblogic/wtc/jatmi/CorbaAtmi.class
weblogic/wtc/jatmi/DomainOutboundConversation.class
weblogic/wtc/jatmi/HTableParser.class
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/KeepAliveTask.class
weblogic/wtc/jatmi/LruCache.class
weblogic/wtc/jatmi/MBEncoding$MapEntry.class
weblogic/wtc/jatmi/MBEncoding.class
weblogic/wtc/jatmi/MBStringTypes.class
weblogic/wtc/jatmi/MuxableExecute.class
weblogic/wtc/jatmi/ObjectId.class
weblogic/wtc/jatmi/Objinfo.class
weblogic/wtc/jatmi/Objrecv.class
weblogic/wtc/jatmi/OnTerm.class
weblogic/wtc/jatmi/QueueTimeField.class
weblogic/wtc/jatmi/RMIReplyRequest.class
weblogic/wtc/jatmi/Reply.class
weblogic/wtc/jatmi/ReplyQueue.class
weblogic/wtc/jatmi/ReqMsg.class
weblogic/wtc/jatmi/ReqOid.class
weblogic/wtc/jatmi/ReqXidMsg.class
weblogic/wtc/jatmi/ReqXidOid.class
weblogic/wtc/jatmi/RouteTcb.class
weblogic/wtc/jatmi/SessionAcallDescriptor.class
weblogic/wtc/jatmi/StandardTypes.class
weblogic/wtc/jatmi/TDumpByte.class
weblogic/wtc/jatmi/TGIOPUtil.class
weblogic/wtc/jatmi/TPCrypt.class
weblogic/wtc/jatmi/TPException.class
weblogic/wtc/jatmi/TPINIT.class
weblogic/wtc/jatmi/TPReplyException.class
weblogic/wtc/jatmi/TPRequestAsyncReply.class
weblogic/wtc/jatmi/TPServiceInformation.class
***** \TEMP\WLS10.TXT
weblogic/wtc/jatmi/KeepAliveTask.class
weblogic/wtc/jatmi/MuxableExecute.class
weblogic/wtc/jatmi/ObjinfoImpl.class
weblogic/wtc/jatmi/PasswordUtils.class
weblogic/wtc/jatmi/RMIReplyRequest.class
weblogic/wtc/jatmi/TGIOPUtil.class
weblogic/wtc/jatmi/TPServiceInformation.class
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/TPServiceRequest.class
weblogic/wtc/jatmi/TXidERFactory.class
weblogic/wtc/jatmi/TdomTcb.class
weblogic/wtc/jatmi/TdomTranTcb.class
weblogic/wtc/jatmi/TdomValsTcb.class
weblogic/wtc/jatmi/TpacallAsyncExecute.class
weblogic/wtc/jatmi/TpacallAsyncReply.class
weblogic/wtc/jatmi/Tpconvert.class
weblogic/wtc/jatmi/TpeIn.class
weblogic/wtc/jatmi/TpeOut.class
weblogic/wtc/jatmi/TranTcb.class
weblogic/wtc/jatmi/TuxRply$LockReq.class
weblogic/wtc/jatmi/TuxRply.class
weblogic/wtc/jatmi/TuxXidRply$LockReqXid.class
weblogic/wtc/jatmi/TuxXidRply.class
weblogic/wtc/jatmi/TuxedoArrayOutputStream.class
weblogic/wtc/jatmi/TuxedoMuxableSocket.class
weblogic/wtc/jatmi/TuxedoReply.class
weblogic/wtc/jatmi/TuxedoService.class
***** \TEMP\WLS10.TXT
weblogic/wtc/jatmi/TPServiceRequest.class
weblogic/wtc/jatmi/TpacallAsyncExecute.class
weblogic/wtc/jatmi/TuxedoMuxableSocket.class
weblogic/wtc/jatmi/TuxedoService.class
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/TuxedoServiceHome.class
weblogic/wtc/jatmi/Txid.class
weblogic/wtc/jatmi/TypedBuffer.class
weblogic/wtc/jatmi/TypedBufferFactory.class
weblogic/wtc/jatmi/TypedCArray.class
weblogic/wtc/jatmi/TypedFML.class
weblogic/wtc/jatmi/TypedFML32$1.class
weblogic/wtc/jatmi/TypedFML32$FmlComparator.class
weblogic/wtc/jatmi/TypedFML32$FmlIterator.class
weblogic/wtc/jatmi/TypedFML32.class
weblogic/wtc/jatmi/TypedMBString.class
weblogic/wtc/jatmi/TypedString.class
weblogic/wtc/jatmi/TypedTGIOP.class
weblogic/wtc/jatmi/TypedView.class
weblogic/wtc/jatmi/TypedView32.class
weblogic/wtc/jatmi/TypedXCType.class
weblogic/wtc/jatmi/TypedXCommon.class
weblogic/wtc/jatmi/TypedXML.class
weblogic/wtc/jatmi/TypedXOctet.class
weblogic/wtc/jatmi/UnsolTcb.class
weblogic/wtc/jatmi/UserRec.class
weblogic/wtc/jatmi/UserTcb.class
weblogic/wtc/jatmi/Usysfl32.class
***** \TEMP\WLS10.TXT
weblogic/wtc/jatmi/TuxedoServiceHome.class
weblogic/wtc/jatmi/Usysfl32.class
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/Utilities.class
weblogic/wtc/jatmi/ViewHelper.class
weblogic/wtc/jatmi/ViewMember.class
weblogic/wtc/jatmi/ViewParseException.class
weblogic/wtc/jatmi/WSRPCRQ.class
weblogic/wtc/jatmi/WsKey.class
weblogic/wtc/jatmi/WsTcb.class
weblogic/wtc/jatmi/atn.class
weblogic/wtc/jatmi/atncontext.class
weblogic/wtc/jatmi/atncred.class
weblogic/wtc/jatmi/atncredtd.class
weblogic/wtc/jatmi/atncredtdom.class
weblogic/wtc/jatmi/atnctxtd.class
weblogic/wtc/jatmi/atnctxtdom.class
weblogic/wtc/jatmi/atntd.class
weblogic/wtc/jatmi/atntdom65.class
weblogic/wtc/jatmi/dreqid.class
weblogic/wtc/jatmi/dsession.class
***** \TEMP\WLS10.TXT
weblogic/wtc/jatmi/Utilities.class
weblogic/wtc/jatmi/dsession.class
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/evt_mib.class
weblogic/wtc/jatmi/gwatmi.class
weblogic/wtc/jatmi/islflds.class
weblogic/wtc/jatmi/ldapAppKey.class
weblogic/wtc/jatmi/metahdr.class
weblogic/wtc/jatmi/mkfldclass.class
***** \TEMP\WLS10.TXT
weblogic/wtc/jatmi/evt_mib.class
weblogic/wtc/jatmi/islflds.class
weblogic/wtc/jatmi/mkfldclass.class
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/mkfldclass32.class
weblogic/wtc/jatmi/ntrace.class
weblogic/wtc/jatmi/rdCtimer.class
***** \TEMP\WLS10.TXT
weblogic/wtc/jatmi/mkfldclass32.class
weblogic/wtc/jatmi/rdCtimer.class
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/rdtimer.class
weblogic/wtc/jatmi/rsession.class
weblogic/wtc/jatmi/secflds.class
weblogic/wtc/jatmi/tcb.class
weblogic/wtc/jatmi/tch.class
weblogic/wtc/jatmi/tcm.class
weblogic/wtc/jatmi/tfmh.class
weblogic/wtc/jatmi/tmibflds.class
***** \TEMP\WLS10.TXT
weblogic/wtc/jatmi/rdtimer.class
weblogic/wtc/jatmi/secflds.class
weblogic/wtc/jatmi/tmibflds.class
***** \TEMP\wls92.txt
weblogic/wtc/jatmi/tplle.class
weblogic/wtc/jatmi/tpusrAppKey.class
weblogic/wtc/jatmi/tsession.class
weblogic/wtc/jatmi/ttrace.class
weblogic/wtc/jatmi/tuxtrace.class
weblogic/wtc/jatmi/unsol.class
weblogic/wtc/jatmi/unsolthr.class
weblogic/wtc/jatmi/viewj.class
weblogic/wtc/jatmi/viewj32.class
weblogic/wtc/jatmi/viewjCompiler.class
***** \TEMP\WLS10.TXT
*****

Similar Messages

Trying to Print - Receiving "Missing USB Class Driver" Error

Since I upgraded from Tiger to Leopard, I have not been able to print. I have a Lexmark X5470. At first, any application that attempted to print simply crashed. Then, I removed the Lexmark folder from /Library/Printers, and did a custom install of just the Lexmark printer software from my Leopard DVD. Now the applications no longer crash, but I am getting this error:
/usr/libexec/cups/backend/usb failed
Missing USB class driver.
Does anyone know what this is? I have deleted the printer and re-added it, restarted the computer, disconnected the printer, etc...everything I could possibly think of.
Thanks!
(And Lexmark did tell me that they have no plans for making their software for this printer compatible with Leopard, so I need to get it working without their help.)

There are several posts here on the Lexmark x5470. One that mentions your specific problem is here:
http://discussions.apple.com/thread.jspa?messageID=5674001&#5674001
Other have had success using the Lexmark drivers and then disabling or deleting a plugin. There are several threads on this.
Hope this helps.
Message was edited by: John Blanchard1

To show missing Evaluation Classes under SPRO screen

Hi,
I'm trying to view wagetype charecteristics/values via SPRO --> ..... --> Wage Types -> Processing Classes, Evaluation Classes, Cumulations -> Check user wage types
I noticed that few Evaluation Classes were not shown. I can see these Evaluation Classes via SM30, table
V_512W_O or via SE38, report RPDLGA40.
How can I display these missing Evaluation Classes via my SPRO screen? Thanks.
Regards

Hello
See if this is of some use - program RPDLGA20 run it as a tree structure, then you can expand the evaluation class node.
Cheers
Rona

[svn:bz-trunk] 18821: Check-in a minor fix that deals with a missing MessageBroker class ( this could happen in Java/Android clients).

Revision: 18821
Revision: 18821
Author:   [email protected]
Date:     2010-11-26 07:33:24 -0800 (Fri, 26 Nov 2010)
Log Message:
Check-in a minor fix that deals with a missing MessageBroker class (this could happen in Java/Android clients).
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageException.java

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

Missing USB class driver for Lexmark X7170

I just upgraded to Leopard and everything went fine but the USB connected Lexmark X7170 errors when printing with this message:
/usr/libexec/cups/backend/usb failed
Missing USB class driver
I did reinstall the Lexmark printer app but no luck. The app does run but missing USB driver still. Posted email to Lexmark but no reply.

Have same problem with Lexmark X5490 - in fact I used it OK under Tiger but wasn't ever able to use since upgrading to Leopard last year.

So I lost my touch at school and I looked everywhere I almost had to miss a class because i was looking for it. I think someone stole it. I looked on find my iPhone sand it said it was offline i was wondering if u can my my touch without wifi

So I lost my iTouch at school and I looked everywhere I almoszt missed a class trying to find it. I looked everywhere it could have fallen outside in the lunchroom and asked all my friends and they didnt have it. Then I went on iCloud to find my iTOuch was offline when I have wifi at school. Is there a way i can find my itouch without using wifi?

Sure. Look for it. Otherwise, no.
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
       Find My Mac can be used from Find My Phone at iCloud.com and via Find
       My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0

Missing Java Classes in Oracle SQL Developer

Hello,
I'm pretty new to Oracle (As a DBA) and very new to Java. I just refreshed our training environment and after the refresh, noticed under the Java folder within Oracle SQL Devloper that the Java Classes were missing.
Can someone tell me how I can repopulate these classes?
Any information would be much appreciated.
Thank you.

Thank you K,
The Java Classes are not present under the SYS user and I'm not sure how to get them back. They do exist within our production and development environments.

Missing tag class on 10.1.3 but not in JDev embedded oc4j

I have a JSP 2.0 application created with a few custom tag files in web-inf/tags. The app runs fine within Jdeveloper's embedded oc4j (10.1.3). After deploying the EAR of this application to a 10.1.3 app server, everything works fine except in the way the server compiles the tag files. It puts them in the wrong folder!
It puts the _tags directory in this folder:
C:\Oracle\product\10.1.3\OracleAS_1\j2ee\FastConnect\application-deployments\FastConnect\FastConnect\persistence\_tagfiles\_nullweb_2d_inf
When I manually copy the tags up one directory, the app works and I do not get a missing class error. What is telling my app server to put the generated tag file classes in this nullweb_2d_inf folder?

repost

Missing stylesheet classes from JSF page

I'm not sure this is JHeadstart related and I will post on the JDeveloper forum as well but since all our applications are built using JHeadstart I thought I would post this hear in case other people had seen similar behaviour.
We're using JDeveloper 10.1.3.4 and JHeadstart 10.1.3.3.81, developing JSF pages.
Ocassionally when a page loads, the stylesheet classes are missing - I presume, as all the graphic rendering is not done, only text is shown on the screen - which then means that most of the user interaction is gone ! This is an intermittent problem. I was wondering if this is related to caching of page content at all and whether there is anything that can be done to help avoid the problem.
Any feedback greatly appreciated !
Cheers,
Brent

Hi Steven,
This managed to resolve itself by undeploying the application, bouncing the server and redploying. It's happened more than once but it's not giving us too much grief ! We also noticed that if the application is viewed on IE8, a generic oracle-desktop ie css file is used (rather than the more specific oracle-desktop-ie7 one) which causes some delays when loading parts of the page.
Cheers,
Brent

Destination Service API - missing indirect class reference

I'm trying to use the destination service api as described in the <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/17/d609b48ea5f748b47c0f32be265935/content.htm">documentation</a>, but Eclipse can't compile the code due to an indirectly referenced class called com.sap.security.core.server.util0.IDEException.
References to com.sap.exception, security.class and tc/sec/destination/interface have already been set. According to the documentation, there should also be a reference to tc/sec/destination/service, but I don't have such an option in the context menu "Add Additional Libraries".
So, where do I find the missing IDEException?
Best regards,
Frank

The class com.sap.security.core.server.util0.IDEException is in library com.sap.exception. That's correct. Don't worry about that.
You have to add those 3 additional libraries to your EJB Project with the right-click over project option:
security.class
tc/sec/destination/interface
com.sap.exception.
You have to add 4 references in your application-j2ee-engine.xml: : 3 to those 3 libraries and another one to the service, which doesn't appear in the popup list. Type it manually. The correct name is "tcsecdestination~service" (not /), and reference target type is "service".
If this doesn't work, you can add to the 'java build path' of your EJB Project the libraries:
tc_sec_destinations_interface.jar
tc_sec_destinations_service.jar
... you can find them into the path of your server:
/usr/sap/<SID>/JC00/j2ee/cluster/server0/bin/interfaces
/usr/sap/<SID>/JC00/j2ee/cluster/server0/bin/service
(some people has had problem with correct versions)
If you are using DCs, you have to add those 3 libraries as Used DCs in your EJB Project. And set the 4 references in application-j2ee-engine.xml
Hope this helps you. Don't forget the reward points
Best regards.

Missed the class "LoggerNotAvailableException" in the wllog4j.jar

Hi all,
I want to create a custom appender following the guide: http://download.oracle.com/docs/cd/E15051_01/wls/docs103/logging/config_logs.html#wp1016031
but seems the class "weblogic.logging.LoggerNotAvailableException" is not in the jar file "wllog4j.jar", where can i find this class?
Regards,
hart

Hi Hart,
There are many locations (JARs) where you can find this missing class:
*1).*
Class: weblogic.logging.LoggerNotAvailableException
Package: weblogic.logging
Library Name: weblogic.jar
Library Path: C:\bea103\wlserver_10.3\server\lib\weblogic.jar
*2).*
Class: weblogic.logging.LoggerNotAvailableException
Package: weblogic.logging
Library Name: wls-api.jar
Library Path: C:\bea103\tools\eclipse_pkgs\2.0\pkgs\eclipse\plugins\com.bea.workshop.upgrade81.thirdparty_1.0.100.200807251732\lib\wls-api.jar
*3).*
Class: weblogic.logging.LoggerNotAvailableException
Package: weblogic.logging
Library Name: wlfullclient.jar
Library Path: C:\bea103\wlserver_10.3\server\lib\wlfullclient.jar
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wondes Are Here)

Missing the .class

i just installed jcreator pro on this computer, and although applets i had already made work fine, new applets are missing the nameofprogram.class file and I am getting runtime errors. any ideas?

sounds like a program error. Perhaps you're not compiling before executing or maybe there are a number of different functions that you'd need to consult help for. Perhaps BUILD, COMPILE, EXECUTE (all with file and project variations).

Missing HttpSessionEvent class

I try to compile the demo project webstore from the Jdeveloper. The compilation failed with message
Error(17,27) : cannot access class javax.servlet.http.HttpSessionEvent, the javax.servlet.http.HttpSessionEvent not found.
My Jdeveloper version is 9.0.695. Have I missed anything? Please help!
Further info. I open the servlet.jar that come with the download of JDeveloper. I don't see the class javax.servlet.http.HttpSessionEvent. Where can I get a copy of servlet.jar containing the class?

sounds like a program error. Perhaps you're not compiling before executing or maybe there are a number of different functions that you'd need to consult help for. Perhaps BUILD, COMPILE, EXECUTE (all with file and project variations).

1022 Data Component. Missing java class webdb/dataptl/JavaWrapper

Hi All,
I have enabled the data component beta feature in ias 1022 on NT (81711) and added this component to an application. On attempting to run the component (not as portlet) I get the error
oracle.webdb.dataptl.JavaWrapper class cannot be loaded.
On running (as SYS)
select object_name from all_objects where object_name like '%/dataptl/%';
I get
OBJECT_NAME
oracle/webdb/dataptl/Constants
oracle/webdb/dataptl/Formatter
oracle/webdb/dataptl/Token
Has this class been ommited from the install or am I looking in the wrong place?
Is there anymore documentation on Data components anywhere?
Thanks
Joel.

Yep I have the same problem on mine too. Sure sounds like an interesting component - too bad it isn't working for me though! Seems like a JAR file is missing or something.

Missing Backing class

Hi,
I'm a newbie to portlet. I need to adding this WelcomeBacking.class under /controls to a welcome.portlet
using workshop.
But when I specify control.WelcomeBacking.class under the Backing Class textbox and start Debug mode, it always complaint about the missing file.
Regards,
Paul Tan

You have to create backing file, something like WelcomePortletBacking.java which extends AbstractJSPBacking and save it under WEB-INF\src folder for the portlet to access it.
BTW what .class are you referring to?
Seenu.

Missing WTC classes???

Similar Messages

Maybe you are looking for