MM -live issues

Hi all
Would any one address some of the Material management issues while going in live part ?
if pls mail at the following mail id :[email protected]

Hi ,
To add to Charlie's reply.
You can ask your businesss for a cut off date based on that you can upload open POs instead uploading all POs .
Condition records , you can leave with this .
User setting & user authorization is beggest head ache .. Just give the list to core user instead you fixing the roles and access otherwise this will lead your life to hell.
Upload of material master and vendor master is also a big challenge. You will always find these data in messy condition . So you can ask for its cleaning like removing duplicate data and all that. And more over you should not get involve in these activities . Ask you Core team to do ...instead you concentrate on conf part and TO - BE cases.
Thanks
Dipak
Thanks

Similar Messages

Mid year go live issue

Hi
its mid year go live i uploaded april to nov. legacy payroll, then run inlk schema . then set the with each month payroll with releasing and exiting the controll record. then i run December month payroll with regular schema . now system is not calculating
annual gross and annual regular income for 12 month, in log tree for tax calculation.
it calculating for dec. to march 4 month as annual salary . with is much amount its calculating all tax declaration, so tax calculation is coming wrong.
exemption /130 tech wage type also its ignoring last 9 month . its calculating from December only.
help me to solve this issue.
suprita

Hello Suprita
Kindly refer to the notes which would assist you further in your query.
Please check if you have carried out the changes as required for mid-year golive as per the notes.
506128: Legacy data transfer
590725: Documentation for rules in INLK Schema
563491: Legacy data transfer - FAQ-
Thanks and Kind Regards
Ramana

BO Live Issue for MS Excel 2003

I am getting the following error while using the BO Live for MS Office 2003.
Live Office version u2013 12.1.3.1028
An error occured while opening the report. The report does not exist;you have insufficient rights to open the report or you cannot make a conneciton to the BusinessObjects Web Serive (LO 02010)
I have access to the BOXI enviornment, reports and universes.
Still getting this issue. Works fine on MS Office 2007
Any idea why this may be occuring? Anything that I need to check?

Hey Ram,
You will need to create a new DSN for the Excel 2007 files when using them as the datasource. You need to go into your ODBC administrator and add a new entry for the new format of Excel files. When you click on Add, there should be an entry for Microsoft Excel Driver (*.xls, *.xlsx, *.xlsm, *.xlsb) . You may also need to delete your old Excel entry first.
Regards,
-Amith.

OSMF 1.6.1/2.0 / Strobe Live issue : Framework can't handle an empty f4m descriptor?

Hi,
suppose that in a live media stream, the f4m descriptor just contains the following:
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns="http://ns.adobe.com/f4m/1.0">
<id>live2</id>
<mimeType>video/mp4</mimeType>
<streamType>live</streamType>
<deliveryType>streaming</deliveryType>
</manifest>
The official Strobe Player can’t handle this situation (see answers to comments in http://www.osmf.org/dev/1.5gm/setup.html, I tried Strobe 1.5 and I get an error when connecting) so I wonder if this is a general issue with OSMF, as I haven’t been able to make it work with my own OSMF-based player (I tried both 1.6.1 and 2.0).
On the other hand in my attempts, after Flash Media Live Encoder has started streaming and the Wowza server fills the f4m descriptor with media-related data, I can load Strobe or my own OSMF-based player and the playback starts without problems.
<manifest xmlns="http://ns.adobe.com/f4m/1.0">
<id>live2</id>
<width>480</width>
<height>360</height>
<mimeType>video/mp4</mimeType>
<streamType>live</streamType>
<deliveryType>streaming</deliveryType>
<bootstrapInfo id="bootstrap478000" profile="named" url="playlist_b478000_w478000.abst" />
<media bootstrapInfoId="bootstrap478000" width="480" height="360" bitrate="466" url="media_b478000_w478000.abst/">
<metadata>AgAKb25NZXRhRGF0YQMACXRyYWNraW5mbwoAAAABAwAEdHlwZQIABWF1ZGlvAAZjb25maWcCAAQxNDA4AAtkZXNjcmlwdGlvbgIAV3tBQUNG
</manifest>
So my conclusion is: currently I must not open the player before the event starts (which I cannot know in advance of course), or it will find an empty f4m and will get stuck unless the web page embedding it gets reloaded.
Is there a way to solve it? I tried with OSMF 1.6.1 and OSMF 2 in my custom player and strobe 1.5 .
p.s.
i tried to submit this as a bug here : http://bugs.adobe.com/jira/browse/FM ( www.osmf.org => bug submit ) registering an user, but i have not the permission to post here.

Hi,
the bugbase has moved to https://bugbase.adobe.com/
AMS usually populates the needed fields with correct information - therefore the tests did not cover the wowza "empty" non-standard f4ms.
As a workaround, I would suggest a web page that would allow access to the stream only after the stream starts, otherwise showing a "plate". This could be done either server-side or in JS.
S.

Xbox live issues. (please help) :)

Hi there, I am having trouble with my xbox live connection, I can sign in to XBL but it does take a few minutes to sign me in, Also when I play games (I mainly always play FIFA) There is a slight lag when im in a match with someone, My players not responding when pressing buttons, Like when I shoot it will take a second or two to shoot which is not normal.
I previously had connection issues and had to have an engineer fix something in my line, Which seemingly has worked perfect for my laptop as everything seems fine, I can load webpages fine with no trouble and speedtester results are as expected. So it may be down to something to do with my XBOX, I use a wireless connection as it is upstairs, but I have tried wired and it is still slow.
Here is my HomeHub 3 stats:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:06:46
Downstream:
6.461 Mbps
Upstream:
1.107 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.3 dB / 5.7 dB
Line attenuation (Down/Up):
35.4 dB / 17.1 dB
Output power (Down/Up):
20.1 dBm / 12.5 dBm
FEC Events (Down/Up):
98124 / 298
CRC Events (Down/Up):
3 / 33
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
26 / 10
Error Seconds (Local/Remote):
2 / 1
And here is my BT speedtest result:
Download speedachieved during the test was - 5.32 Mbps
For your connection, the acceptable range of speeds is 2 Mbps-7.15 Mbps.
IP Profile for your line is - 5.84 Mbps
Upload speed achieved during the test was - 0.93Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
Any help on this is much apprecitated, I have tried changing wireless channel and using static IP to no avail.
Solved!
Go to Solution.

So I have left it overnight, But it seems to have restarted itself at some point as my uptime is only 11hours
Here is lates hub stats:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 11:26:31
Downstream:
6.681 Mbps
Upstream:
1.098 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.4 dB / 5.7 dB
Line attenuation (Down/Up):
35.4 dB / 17.1 dB
Output power (Down/Up):
20.4 dBm / 12.6 dBm
FEC Events (Down/Up):
3189787 / 28
CRC Events (Down/Up):
712 / 35
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
16520 / 14
Error Seconds (Local/Remote):
237 / 1
Also here is latest speedtest result:
Download speedachieved during the test was - 5.62 Mbps
For your connection, the acceptable range of speeds is 2 Mbps-7.15 Mbps.
IP Profile for your line is - 6.03 Mbps
Upload speed achieved during the test was - 0.92Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps

My book live issues

Just bought 3tb My Book Live nas drive to use for backups. Finder can see the drive, but Time Machine can't and neither can Disk Utility. I am running OS 10.8.4 on a 27" Imac. I have done a factory restore on the disk to see if that made any difference - no.
Any ides how to persuade Time Machine to back up to it please

I have just started using a 2tb mybook live via wifi and though i set it up by directly connecting to my imac ethernet socket it works fine. One thing to note is that you must login using the Guest signin. An issue that may arise is restoring from a time machine backup from the my book live may not work as it may not be vissible until the OS and apps are installed, I say may arise as i have not tried it having just replaced the internal drive recently and recovered from a time machine backup stored on a usb drive.
Hope this helps

Push Site Live Issue

Hello ,
I am trying to us Adobe Muse and BC however When I PUSH SITE LIVE it states that I need to have a Creative Coud Plan ( which I do ). So any help on this would be great!
I also think its not recognizing that I am a Cloud member.
its says this: To push this site live you should upgrade to a paid Adobe Creative Cloud Membership which includes hosting for 5 sites with Adobe Business Catalyst.

Hello celum20,
Please see my reply provided here: http://forums.adobe.com/message/4600738#4600738
We'll take care of the issue after you submit the case using one of the two methods mentioned in my reply on the above topic.
Regards,
Cristian

Xbox live issues

Hi there,
I will try to be as specific as possible with my problem and hopefully someone can help
I currently have BT infinity broadband and have done for about a year now always with very few issues
When i first got my router i had to forward my ports to enable me to use xbox live i followed an online tutorial and all was great
Recently (about 2 weeks ago) i started getting an issue whereby my xbox live gets disconnected and i can instantly reconnect, i also use a laptop, iphone and ipad all of which suffer no internet downtime.
It may be completely unrelated but i started getting these issues around the same time i started streaming lovefilm on my xbox 360, i sas halfway threw a film when the first disconnection happened.
There seems to be absolutely no pattern to the disconnections, i could be on xbox live for 2 mins or 20 minutes but once it disconnects once, it does it time and time again in very quick succession, i have checked my routers settings and nothing has changed
I have tried setting a static ip which did not work, ive tried reseting my hub to factory settings and reconfigiring this again did not work, i have messed around with settings on xbox 360 and again did not work.
I have spoken to xbox live support in regards to this matter and they say it is an isp provider issue, what do you guys reckon?
Just ran a number of speed tests at speedtest.net,
Ping: 30 - 35
Download: 25 - 30 mb/s
Upload: 3 - 5 mb/s
Solved!
Go to Solution.

Just a couple of questions.
Have you tried using different Ethernet ports on the home hub, including the Gigabit port?
How long is the Ethernet cable between the home hub and the Xbox?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Xbox Live issues - can anyone help

Hello - I am hoping someone can help me out with some Xbox Live connection issues that are driving me crazy. (Please bear in mind that I am a novice with these issues).
I am attempting to connect to XBox Live via the Xbox wireless adapter and the WRT54GS router. I have the router hardwired via ethernet port to a desktop computer. Here are the problems:
1. The connection is very weak and spotty, with frequent disconnects. I would say that I get a successful connection to Xbox live about half the time. The failure message seems to be different every time. At best, I get only one red bar on the Xbox Network Settings. Usually, I have to unplug and re-plug in the router to get online.
2. I tried to help the connection by buying a wireless range expander. However, when the range expander is plugged in, either I am unable to connect or it connects but I am unable to download any updates or content or marketplace runs very slowly. I assume there is some configuration problem with the expander, but I have no idea how to fix it.
3. Even when I am connected, if my wife turns on her laptop I get disconnected.
4. When I call Xbox support, they tell me it is a problem with the router. When I call Linksys they tell me it is a problem with Xbox Live.
Can anyone help? I have read a couple of posts about setting static IP addresses and opening ports, but I don't know how to do this. And would it even help?
Thank you!!!
Message Edited by MarcM on 07-11-2007 02:55 PM

hi... logon to router's setup page, open I.E. and in the address bar type 192.168.1.1 it would ask for username and password, put "admin" (default password) as a password, try changing channel to 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change Transmission rate to 54Mbps, also try upgrading latest firmware on the router, go to www.linksys.com/download and download the latest firmware for the router, logon router's setup page again and click on "administration" >> firmware upgrade and try upgrading latest firmware...
click on "application & gamings" tab...and try triggering 88, 3074 ports on the router for X-Box...reduce MTU to 1365 on the router.

New Fios G1100 and Multiple Xboxs Connected to xbox live issues.

I just upgraded my router from the Actiontec MI424WR to the G1100. Now I am into an issue with Fios keeping a connection to xbox live on selected xbox devices. I have 3 xbox 360 and 2 xbox one connecting to the network. Both Xbox One maintain solid connection to live, but the 360 experience I have a totally different experience. My set up has 1 Xbox One Wired, 1 wireless. I have 2 xbox 360 wireless and 1 wired. I am also experiencing problems with one of my desktops which is wired that randomly loses a connection to internet. I been using this TRENDnet 8-Port 10/100Mbps GREENnet Switch (TE100-S80G) to help with wired connections. Both Xbox Ones on the network remain connected at all times, or at least I haven't seen a drop. My experience with my xbox 360s are completely different from my Xbox One.They all drop connection randomly every 5 to 20 min. I can immediately sign back in , but this continuosly happens. I was able to get one xbox 360 to maintain a continuous connection by putting it IP address and enabling DMZ on it. I have tried port forwarding but that doesn't work. Anybody have any suggestions or solution? Or should I just shipped back the G1100 and go back to Actiontec MI424WR.

Who is your ISP...?
Are you getting any error message...?
Try the following settings and check..
Open the router setup page,On the set-up tab change the MTU Size to 1365 and click Save Settings...Click on "Administration" tab and disable the option UPnP and click Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox
Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Fios and xbox live issues

Ok well ive read all the stuff on the internet about updating the firmware and it should work. My problem is I have the Gen 2 router, so the firmware isnt compatible at all. Im not even trying to do xbox live wirelessly, i have an ethernet ran. My wireless laptop and my wired desktop computer have been running awesome internet since I got FiOS installed about 4 months ago. Just got my xbox and now im having these issues. Ive tried restarting both the router and the xbox, ive set the router settings back to default. idk what to do, help me out!!!
edit- thru the xbox network connection wizard thing, it looks like its not even seeing a connection at all. could it be i have the wrong type of cable? i just bought it, its a belkin fastcat 5e patch cable. is this the right type of cable?
Message Edited by CRZYairBORNE on 08-08-2009 03:18 PM

Cable type is fine.
Couple things to check....
make sure the cable is plugged into one of the lan ports on the router (yellow plugs) not the wan connection (white plug). Easy to make the mistake if you have coax style internet via fios.
If connected correctly, do a quick loop test with the cable to make sure that cable is ok. Take both ends of the cable and plug both ends into the router. for example, plug end one in port one and end two in port two. make sure that both lights light up. If not likely bad cable. If so, cable is likely OK.
If cable tests OK, and you have it connected correctly to the lan, then the problem is likely with the Nic on the Xbox. Try going into the network settings in the xbox and reset to defaults on the xbox.
====================================================================================
Error exists between keyboard and chair.

Newest 3TB Time Capsule with Motorola SB6121 and Xbox live issues.

I just bought a new 3TB Time Capsule but am having issues with the speed of my internet and connecting to XBL. I use Time Warner and have a Motorola SB 6121 modem. The modem is brand new as well and worked perfeclyt with my old router(Trendnet TEW-gr633). I want to use the time capsule as my only router but it is only testing out between <1-2 on the download. I was getting 15-25 on the download before the TC. I am also having issues connecting to the network on my xbox 360S as well.
Any help with adjusting the settings on my TC would be much appreciated.

I would suggest adjusting the Time Capsule's Ethernet WAN port setting using the AirPort Utility. By default, this option is set to Automatic. I would recommend changing it to "1000 Mbps / Full Duplex" to see if this helps.
ref: AirPort Utility > Select the TC > Manual Setup > Internet > Internet Connection tab > Ethernet WAN Port

New Windows Live issues

I have email on MSN and recently have been directed into Windows Live. However I get a message that that browser is not supported and I can's seem to find a way around or to get it set up?
Any ideas or suggestions?
Thanks, 4myboys

What browser are you using? Safari? If so, try using Firefox to see if that works.
Otherwise, you'll have to try tricking the website into thinking that you have a different browser than you really have (i.e. Windows Internet Explorer).
To do this in Safari, type the following into a Terminal window (/Applications/Utilities/Terminal) and then press Return.
defaults write com.apple.Safari IncludeDebugMenu 1
The next time you launch Safari, you'll see the Debug menu in Safari, and you can then change the user agent to something like Windows IE 6.0. Make this change and then visit the website. It'll likely let you in. However, just because it lets you in, doesn't mean that you'll be able to do anything. If the site uses ActiveX controls or anything else that's specific to Windows IE, your only choice will be to visit the site from a Windows box.
Once you're done with the site, you'll want to set the User Agent back to the default, which is "Automatically Chosen".

E3000 and Xbox Live Issues

Hi All,
So I originally had problems with my xbox where the wireless would drop out. I chaned some settings and I also set up port forwarding for my xbox which seems to have stabilized my network. However, when attempting to download certain files from xbox Live, my router will frequently freak out, reset (so all network connectivity disappears) and after a few moments, everything comes back up again.
I have the xbox 360 as the only device accessing the 5ghz wireless network. Network mode is "Mixed", Channel Width is "Auto", Channel is curently set to "36" as before it ws also set to "Auto DFS" but experienced more frequent drop-outs when simply logging into xbox Live. Again, SIngle Port Forwarding for just this device is enabled. Anyone have any other suggestions? Should I try a different Channel?
Thanks,
DB

I have plenty of other wireless devices (2 iphones, a mac mini, laptop). Whats the advantage of moving everything over to the higher bandwidth when everything Ive been told suggests that you dont want to crowd the higher bandwidth with devices that shouldnt and cant take advantage of the higher bandwidth? I mean, why did I spend money on this router to begin wth if it cant even support the devices I have now? Sorry, this is more than a little frustrating and I guess I would still like to hear some more ideas of what to try.

Going live issue

I launched my new website (which replaces the old one) there are more than 2 hours and it is still not accessible.
I get a blank page (no 404)? the trace route seems correct.
The problem is that my client has no more email (10 accounts) and I do not know how long it will last.
Is this normal ? should I have to wait ?
http:www.scp-rabier.com
Thank you for your help

Hi,
It looks like it was just a propagation delay, it's is working currently
http://screencasteu.worldsecuresystems.com/AP/2013-06-26_1546.png
Kind Regards,
Alex Pavelescu

MM -live issues

Similar Messages

Maybe you are looking for