MM new topics

since MM is in saturation stage. please provide me some important new technologies in SAP MM that we need to concenterate.
thank you in advance

Dear,
Since you mentioned as SAP Support Consultant, this usually refer to Level 2 support activities in organizations.
Usually in general, all Corporate level organizations used to have at least one support consultant. This may be a single person who can have a brief knowledge of areas, or many for each FI, MM etc.
The main aim of client to keep a support consultant is to minimize the dependancy on main consultancy service provider often. In the end, on typical upgradations and maintenance the client has to call help of these people to perfom activities to solve their problems.
The requirements are:
Provide 2nd level support and resolved all assigned issues and communicate resolution to businessu2019 1st Line Support.
Responsible to manage and track problem calls in Service Center and track resolution.
Work with the development team to test change requests and provide knowledge transfer of changes to team members;
Ensure all upgrade related issues are solved within the specified time.
As per my opinion the knowledge of MDM is must since you are covering MM. Regarding ALE, ABAP its not required 100% knowledge, but clients prefer candidates who can have basic knowledge in these.
Regards,
Syed Hussain.

Similar Messages

Unable to create new topics in RH 9 Word

Since the switch from RH 5X to RH 9, new topics are not publishing. Typically the title would always be preceded by charachters, ex. "* # $ K > @ Pacer Contacts," however, now when new topics are created the title formats differently, ex. "*loc_cnt #Test $Test +CONTACTS:0 KTest @Status|0|||0||Testing 123|||| Test." Also, when I look at the properties of the new page, the Topic Title & the Topic ID are blank.

Hi David,
No, unfortunately not. I’m in the process of converting the projects to html and I can create new topics there. I never really figured out why it suddenly stopped. I hope you have better luck that I had.
Best regards,
Michelle Bosu
American President Lines Ltd.
JP & S Trainer
APL-Moving Business Forward
Visit us at www.apl.com

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

How do I make a new topic have the same formatting as other topics in a project?

Hi,
I am using RH 8 for HTML. I am updating a preexisting project and am new to RH. When I create a new topic, how do I get the formatting (fonts, shading, etc.) from another topic? The old topics are formatted in a certain way. When I create a new topic, or even paste existing content from an old topic into it, it has different fonts and shading. Is this something I must do manually, or is there an automatic way? Either way, I could use some pointers.
I would past a screen capture here, but when I tried to do that, the formatting went away.
Thank you for any help you can provide!
Erin

Hi there
Probably it's just a matter of associating the correct CSS file.
Open both topics in RoboHelp.
Edit a topic where things look correct.
Click the CSS icon as shown below:
Click the image below for larger view
Now edit the errant topic.
Click the same icon and choose the CSS file you saw earlier.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can I see only new topics from selected spaces on one page?

Just wondering how can I do the subj.
For instance, Im interested only in Database space, and only in several sub-spaces like high availability, upgrade, general.
So, I would like to see new topics only from these areas on single page. how can I do this?
Currently, in order to check for new questions, I need every time to go to every space, then select sub-space, go back, select another subspace. This is very inconvenient, slow and takes server resources as well.
Regards
Ed

You have to select Track in Communications under Actions in the Overview view of the appropriate forum space you are interested in. You should then receive notifications under Communications and can filter by "unread". If you don't want email notifications, you need to set it OFF in your user preferences. For more detailed info, see my previous post here:

Need help with New Topic in RoboHelp 7

I'm trying to pick up where someone else left off and am a little lost. I have a WebHelp project on a Sharepoint site. I have added a new topic which I can see in my file structure, but when I generate the project the new topic file does not show up. It must be something small I'm missing. Help!!

Welcome to our community
Did you add the topic to the Table of Contents structure or the Index? How are your users going to arrive at the topic?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Errors on creating new Topic in RH9 (9.02 Patch)

Have found that when creating a new topic in RH9 project that on building the project errors 3018 and 3111 are being presented.
Appears that the error is being caused by the placement of the Page Break in the word document at the commencement of the topic. Prior versions of RH would insert a new topic as such :- (Note correct placement of Page Break and 'Keep with next' paragraph mark).
When adding a new topic now it appears as such :-
Note the placement of the 'Keep with next' paragrah mark is now at the start of the topic line rather than at the start of the page break.
On building then project with a topic in this format causes 2 additional error messages to be presented in error wizard :-
1. HC3018: Warning: In the project file, an #include statement is specified without a filename, and
2. HC3111: Warning: This topic contains keywords but no title
The second warning (HC3111) is returned despite the topic properties containing a title, and keyword sections correctly filled out.
I have found that the work around to fix this is to correct error HC3018 first by :-
Place Cursor at start of the topic line immediately prior to the # symbol.
Back space to remove the 'Keep with next' paragra[ph mark to a point where the mark is removed, the heading properties are removed from the topic title and the Page break indication now extends across the entire page.
With Cursor placed at the commencement of the topic line again immediately prior to the # symbol, re-apply the 'Keep with next' paragrah command. This applies the command on the 'Page break' line.
Re-apply Heading style to the topic line. It now looks line this :-
Re-build project. Error messages 3018 and 3111 now both gone.
Yet another bug in this version now doubt.

Peter G,
Thanks. Tried that and no the problem does not present in a new project. Oddly enough this started occurring in a new project that had these documents imported from a previous project (word 2003 format into Word 2010 format).
So it doesn't occur by default in a new project, but does in an older project migrated from 2003 word format into 2010 format. Go figure.
David H.
Thanks to you for your suggestion. Worked fine. Not sure why all of a sudden I have to do this and why the same issue does not occur in new project by default, Maybe a word 2003 to word 2010 save / convert issue ?
Nonetheless your suggestion and fix works well and far less painful than my clumsy solution.
Once again, Thanks to both of you for your assistance

When posting, please post a new topic if you don't have an answer!

Occasionally you may be tempted to add your voice to a chorus of complaints. Unfortunately, if what you are here for is to get assistance for a problem which you can't find an answer for, trailing an existing thread with a second complaint, is usually considered bad form. It has been given the nickname of "threadjacking." Instead, when you don't have an answer, and are seeking an answer, start a new topic by clicking on the Discussions header links of the board below the big bold text "Apple Discussions" to locate the board most appropriate for your question. Once you have found the board appropriate for your question, above the posts on the upper left should be a "Post a New Topic" link. Use that link to create your own topic. If that link is not there, you have probably already entered another thread, and if that is the case, use the link Batch to Topic List link to return to where you can Post a New Topic.
Here are the advantages to not threadjacking:
1. You will get a much wider audience of possible experts to help you out.
2. The original poster of the thread will not get advice that does not pertain to their situation, and you won't get advice that doesn't pertain to your situation. You wouldn't want either you or the other person to get the wrong advice and try something which could make them get more in a hole.
3. The experienced users with this situation won't get confused who they are offering advice to and give the wrong advice to the wrong person.
Thank you!

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(117937)

Kad: What is a forum, board, and category and how to post a new topic?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
In the Discussions Feedback board you'll see this quote:
If your question concerns a hardware or software technical issue, please do not post in this forum — instead, go to the Apple Discussions Homepage, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the Post New Topic link.
It appears that many still miss this advice as they go ahead and ask in the Discussions feedback page how to post a new topic. This advice is as clear as can be, though some may not understand what the terms are in this quote. To clarify Apple Discussions is organized into the following elements:
Apple Discussions Homepage
- Categories of Topics
- - Individual _Topic Forums_
- - - Individual _Topic Threads_
When you enter a Category you will see _Topic Threads_ but no Post New Topic link. The reason for this is that all the threads in each forum are combined beneath the individual Forum links. If you wish to post a new topic in any specific Forum, you have to navigate to the Forum first to post a new topic in that Forum. Don't let the preponderance of views or responders make you think you need to post a "me too". In fact this makes it harder on the original poster to determine what is the cause of their problem. It is better to post your own topic, so you can get more focussed attention, and a wider audience who can help you. If you have a reply that might lead to a solution for the original poster, by all means reply. Otherwise you just contribute to the length of the thread, and don't really help in finding a solution.
An example of a Category: iMac
An example of a Forum: Using your iMac G5
Note also the header of the board says: "Category" or "Forum" to help guide you.
Be sure also to identify your Mac or operating system before posting in specific forums, as some Macs may look similar. If you need help, ask first.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Hi there!
Well If what you did is you transfered the Pictures from one folder to another using your phone, the Root folder is the main folder so lets say you transfered it to the memory card the root folder is the memory card.
Hope tis' help!
"If you think this post is helpful, please click on the green button"

New topic not appearing in merged index

I have used @Peter Grainge’s “Merging Help” document for a few years now (at least since RoboHelp 8)
Now using RoboHelp 10. Internet Explorer 9.
I created the topic. Created a Map ID for the topic
Added to the index.
Saved the project.
Generated the parent (parent already had the child project in its TOC from years back). Content setting for Index is: “Default Index”. Navigation setting for Preferred Format is: “DHTML”.
Generated the child. Content setting for Index is: “Default Index”. Navigation setting for Preferred Format is: “DHTML”.
Copied the parent and child whdata, whgdata, whxdata folders to folders outside the project along with the generated results for the parent and child.
TOC is synchronized, Index appears, but the new topic does not.
Did I miss a step?
I did not add the topic to the browse sequence.

That narrows things down a lot. Close the project and save a copy of the index file somewhere. Open the project index file in a text editor. Can you see the index keyword in there? Does the entry look correct compared with other entries? If not correct it.
If still no result, try adding another keyword.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Why can't I post a new topic in the Leopard discussions.

The option is available in other Apple discussions, but for some reason it's not an option for me in the Leopard area.
I just want to ask a simple question about why Firefox is now launching every time I restart my computer, but don't want to do so in a discussion about Final Cut or iLife or any of the other forums where posting a new topic is an option because that would be bad etiquette. At the same time, I'm not given much of an option.
Message was edited by: dddnlb

Hi dddnlb!
"Why can't I post a new topic in the Leopard discussions."
The info posted below is also available in the Announcement How to Post a New Topic
If you have a Technical question about Apple Hardware, Programs, Services, Technology, Software, Applications, Products, etc, from this page Discussions - Forum Home, select an appropriate Category from one of the sixteen divisions.
For example, under Mac OS X Related Software, choose the Category Mac OS X v10.5 Leopard.
On the page that opens, select a Forum, such as Installation & Setup, or Using Mac OS X Leopard.
Most Category pages, have numerous Forums within them.
But some may have only one, two, or three.
For example, the Safari Category page, has three choices listed under Forum / Category:
Safari For Windows
Safari for Mac Support forum
Safari 4 (Beta).
And the Apple Remote Desktop Category, has only one Apple Remote Desktop Forum.
From a Category page, select an appropriate Forum to post in.
On Forum pages, there is an option to Post New Topic.
More info here How Is Discussions Content Organized?.
Edit: I have requested that a Host, relocate your Topic to a more appropriate Forum.
As it will be transferred, it is not necessary for you to repost elsewhere, at this time.
ali b

New topics are compiled in but don't display when help button is pressed

Folks,
I'm using RoboHelp HTML Build 6. I am the only writer who uses RH and have been using this build for 2 years or so.
I recently got a new map file from the developer containing 2 new map IDs. I used the same steps to import the map file, create the new topics, and map them to the new map IDs that I have been using for years. But when I compiled RH and pasted the chm into the application folder, those 2 new topics don't display when the help button is clicked on the dialog box to which they are mapped.
When I generate the chm I can look at the output at the bottom of RH project view and see that that the 2 new htm files are being compiled into the RH project. I can also see them if I open the generated chm and go into the TOC and click on a link to them.
Does anyone have any ideas? I have tried redoing the usual procedure (see below) for the importing and mapping from scratch several times. I have also tried BugHunter (see below).
Procedure for Importing and Mapping (this time the help for all the older dialog boxes works but not for the 2 new ones)
1. Open the new map (.hm) file from the developer and add #define followed by a space to each entry beginnng with the string HID in the new map file (I don't know why but nothing works unless I do this.)
2. Delete the old map file from the RH project.
3. In Windows Explorer, copy the new .hm file into the RH project folder.
4.In Project Manager view, open Context-Sensitive Help. Right-click on Map Files. Select Import. Browse and select the new map file.
6. Map the new topics using File, Edit Map IDs.
7. Generate the .chm and pasted it into the application where it always goes.
BugHunter Procedures and Results
I first tried the Test HTML Help API dialog.
I specified the .CHM file I compiled and tested both options:
--HH_DISPLAY_TOPIC: I put in the name of the new help (htm) file and its relative path and clicked Help. Nothing happened.
--HH_HELP_CONTEXT: I put in the Map Number for the new dialog box and clicked Help. The new help topic I had created displayed.
I also used the Tools tab in BugHunter to do a CSH (context sensitive help) Test. I identified the chm file and opened it and put in a new map number, then clicked Show Help. Nothing happened.

Welcome to the RH forums.
On the surface it sounds like you have done everything correctly so it should just be a case of going back and double checking that you have the correct CHM, that the mapid is exactly the same as in the app and that the app has been updated.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Can you set live bookmarks to show topic replies rather than new topics (or is that a setting of the site/forum)?

I have live bookmarks for some forums, blogs, and news pages on my bookmarks toolbar and only one site shows topic replies rather than new topics in the dropdown bar. Can I configure the forum ones to show topic replies or is that a setting configured by the website itself?

Nope. This is a common request, for some form of preview, typically as Outlook does it. Almost equally common are requests to have absolutely no preview whatsoever in case something nasty happens.
Many of us think the Message Pane below the thread list is perfectly adequate for a quick scan of message content.

SP01: 300 downloads of SP01 PL03! Give feedback here - or open a new topic

Hello,
2005A SP01 PL03 has been downloaded by more than 300 times.
Feedback about issues is rare. Usually this means that no major issues occured and that the information given (e.g. in the documentation of DB and UI changes + potential compatibility issues) is OK as well.
That would be great!
If you are looking for a place to give general feedback, please do it here.
If you want to report an issue you can use this thread as well, but I would like to encourage you to open a new topic with "SP01: " as a prefix!
Thanks in advance,
Frank
PS: Please don't forget to check SAP Note 931019 for the latest update about known issues!
PS2: This was the thread after crossing the 200 downloads borderline:
SP01: More than 200 downloads of SP01 - great! Please give feedback here:

Hi,
About the new FormData event in SP01, I wanted to calculate an expense in invoices depending on some conditions. Here is my code:
protected override void SBO_Application_FormDataEvent(ref SAPbouiCOM.BusinessObjectInfo BusinessObjectInfo, out bool BubbleEvent)
            BubbleEvent = true;
            if (BusinessObjectInfo.EventType == SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD && BusinessObjectInfo.ActionSuccess && BusinessObjectInfo.Type.Equals("13"))
                SAPbobsCOM.Documents d = (SAPbobsCOM.Documents) B1Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
                if (d.Browser.GetByKeys(BusinessObjectInfo.ObjectKey))
                    string p = d.PaymentMethod;
                    int n = d.Expenses.Count;
                    d.Expenses.SetCurrentLine(0);
                    d.Expenses.ExpenseCode = 1; // As seen on OEXD table
                    d.Expenses.LineTotal = 5.5;
                    //d.Expenses.TaxCode = "V2"; Tried to explicitly set a value, no success.
                    d.Comments = "OK";
                    int ret = d.Update();
                        if (ret != 0)
                            int code;
                            string des;
                            B1Company.GetLastError(out code, out des);
                            B1App.MessageBox(des, 0, "OK", "", "");
Well it doesn't work! Note that I'm able to add manually an invoice with expenses, and if I create a quotation (type 24), an order (type 17) or a delivery (type 15) everything works fine.
I'm using the SBODemo_IT database
The error message (-10) claims something like 'Tax code is required for freight costs'
Is it a bug?
Thanks

Please help me find "post new topic" link

I want to post an issue in the shuffle 1st generation forum but cannot find the "post new topic" link on the page.
I'm feelin' kinda stupid, and frustrated too!
obviously, I found the "post new topic" link for this forum, so I don't think it's a browser issue (firefox 1.5.0.10, windoze XP). also, I have signed in with my apple ID.
here's the link to the forum to which I want to post:
<http://discussions.apple.com/category.jspa?categoryID=152>
thanks for your help and patience.
iMac G4 17" 800MHz 1.5GB ram Mac OS X (10.4.8)

Hi Ellsworth!
Here is some additional information.
If you have a question about using Discussions, from this page Feedback about Discussions, click on Post New Topic.
If you have a Technical question about Apple Hardware, Programs, Services, Technology, Software, Applications, Products, etc, from this page Discussions - Forum Home, select an appropriate Category from one of the twelve divisions.
For example, under Mac OS X Related Software, choose the Category Mac OS X v10.4 Tiger.
On the page that opens, select a Forum, such as Installation & Setup, or Using Mac OS X Tiger.
Most Category pages, have numerous Forums within them.
But some may have only one, two, or three.
For example the Safari Category page has three choices listed under Forum / Category, but only one is a Forum: Safari Support forum.
On Forum pages, there is an option to Post New Topic.
Click here for all iPod Forums.
Click here for all iTunes Forums.
More info here How Is Discussions Content Organized.
It can be confusing, but explore the different areas, and you will acquire a better understanding of the hierarchy.
Good Luck!
ali b

Can't add Window setting to new topic

I am working on a WinHelp project created long ago (in version 6 or earlier--the first time through the numbers), and I'm now using version 8 (in the newer numbers) on Windows 7.
I created a new topic and on the Advanced tab, I selected a Window (the project has different windows for procedures, field descriptions, etc.). When I generated the help file, the topic does not have the window colors, but the content is there.
I also tried manually creating the > footnote by copying and pasting from another topic (the old topics display the colors, even those without a Window selected on the tab).
I will greatly appreciate any help with this.
Thanks,
Walt

Hi Gregory,
Looks like the site is still in trial (e-mail accounts/domains are not available in trial mode). You need to take 2 steps:
- Upgrade the site (from admin, top left corner, go to your partner portal, access the clients section, select your site, then access "Upgrade site" from the details panel on the right side of the page) by choosing a plan and entering your billing information
- Purchase a domain (be sure to link it to our own DNS: ns1.worldsecuresystems.com (192.150.2.143) - primary DNS server & ns2.worldsecuresystems.com (192.150.8.143) - secondary DNS server) then go to Admin > Site Settings > Site Domains > and add that domain.
You'll now be able to go to Site Settings > E-mail Accounts and set them up
(http://helpx.adobe.com/business-catalyst/partner/going-live-guide.html)
Kind Regards,
Alex

MM new topics

Similar Messages

Maybe you are looking for