MM / WM legal and fiscal requirements for Malaysia available?
Hello all,
I'm doing an MM-roll-out for Malaysia. My Customer asked whether there are special legal and fiscal
requirements in the MM / WM area for Malaysia such as inventory valuation reports or something for physical inventory count etc.
Is there somebody who knows?
Thanks in advance and best regards,
Burkhard Kuehlen (IBM-Germany)
Hi Debbie
Are you using QM also ? Then you can do this within standard config & master data in 3 steps:
1) You can define 'ITAR' as QM Infosystem.
IMG->QM->QM in Logistics->QM in Procurement->Define QM Systems (Txn OQB7)
Read the IMG documentation here which is good.
2) Txn:MM01. Maintain QM view for material (QM Proc active and Target QM system)
3) Txn: XK01/XK02; Maintain vendor's QM system in Purchasing data.
OR
QI01/QI02: You can also maintain Quality Info record for vendor/material/plant
combination and maintain a QM system there.
You do not need to use QM additional functionalities or implement QM entirely to use this.
Best regards
Ramki
Similar Messages
-
What are the supported Platforms and system requirements for JSE?
What are the supported Platforms and system requirements for JSE?
Hi There,
The following are the system requirements & the support platforms for JSE :-
* Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
* Solaris 9 Operating System (x86 Platform Edition)
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
* Windows 2000 and Windows XP
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher -
Software and Hardware Requirement for Management Agent
Can any one help me to find out the software and Hardware requirements for Oracle 10g Management AGent for various platforms.
Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.
-
Want to learn functional and technical requirements for UCM
Hi,
I'm very new to UCM. Can someone please send meplease tell me where to find functional and technical requirements for UCM from user and implementation perspective.
Thanks Very Much,
Andycan you be a little more specific?
Technical info can be found in the documentation. Requirements and so on.
What exactly do you expact from functional requirements ?
Edited by: Yannick Ongena on Nov 30, 2011 5:50 AM -
Gathering Technical and Business Requirements for SAP PI
I need to some documents and tools, or interview guide & questionnaire to gather the stakeholders' technical and business requirements for SAP PI
Thanks for the links,
I am quite new at SAP and currently trying to elaborate should i use SAP PI or not based on my project stakeholder's requirements.
And my biggest problem right now is how to capture technology and business requirements and match them with SAP PI
I plan to use this format while requirements gathering about integration platform:
1- Draft Requirements
Q- What is the names and status of sending and receiving application and how they will be used
2- Detailed Requirements
Q- Connectivity, Administrative and Business related questins
3- Administrative and project management information
Q- Which applications are involved, who is the original supplier? Who is technical contact at the supplier
4- Business requirements
Q- Questions about the information flow which will support some business processes
5- Connectivity to applications
Q- Questions about connectivity mechanism, file formats (flat file or XML or something else), data access methods and so on
What do you think about the general concept?
Edited by: Alper Celik on Feb 2, 2009 10:37 AM -
Are SUID and SGID required for oracle functionlities?
Could anyone please confirm that the below oracle files and their permissions SUID and SGID are valid (and actually required) for oracle functionality? Thanks.
SUID binary /opt/oracle/11.2.0/bin/extjob
SUID binary /opt/oracle/11.2.0/bin/oradism
SUID binary /opt/oracle/11.2.0/bin/oracle
SUID binary /opt/oracle/11.2.0/bin/nmb
SUID binary /opt/oracle/11.2.0/bin/nmo
SUID binary /opt/oracle/11.2.0/bin/emtgtctl2
SUID binary /opt/oracle/11.2.0/bin/nmhs
SUID binary /opt/oracle/11.2.0/bin/jssu
SUID binary /opt/ORCLfmap/prot1_64/bin/fmputlhp
SGID binary /opt/oracle/11.2.0/bin/oracle
SGID binary /opt/oracle/11.2.0/bin/emtgtctl2Fresh installation of 11.2
ll extjob oradism oracle nmb nmo emtgtctl2 nmhs jssu fmputlhp
-rwsr-s--x 1 oracle oinstall 66239 Jun 2 2013 emtgtctl2
-rwsr-x--- 1 root oinstall 1223782 Jun 2 2013 extjob
-rwsr-x--- 1 root oinstall 43514 Jun 2 2013 jssu
-rws--x--- 1 root oinstall 34198 Jun 2 2013 nmb
-rws--x--- 1 root oinstall 71524 Jun 2 2013 nmhs
-rws--x--- 1 root oinstall 45157 Jun 2 2013 nmo
-rwsr-s--x 1 oracle oinstall 201099176 Jun 2 2013 oracle
-rwsr-x--- 1 root oinstall 68278 Aug 14 2009 oradism
-rwxr-x--- 1 oracle oinstall 35300 Aug 14 2009 fmputlhp
ll /opt/ORCLfmap/prot1_64/bin/fmputlhp
-r-sr-xr-x 1 root root 35300 Jun 2 2013 /opt/ORCLfmap/prot1_64/bin/fmputlhp -
How to get Current Quarter and Fiscal Quarter for a Date - Fiscal Year starts from 1st April
Hi,
I need to calculate current quarter and fiscal quarter in my Sql query.
I have a column for DateTime Datatype.
I need to find out Current Quarter Name like Q12012, Q22012, Q32012, Q42012 and Fiscal Quarter Name as well.
Now Fiacal Year starts from 1st April, and Current Quarter starts from 1st Jan.
For Current Quarter of 2012
Jan-Mar = Q12012
Apr-Jun = Q22012
Jul-Sep = Q32012
Oct-Dec = Q42012
For Fiscal Quarter of 2012 ( starts from 1st Apr, 2011 )
Apr2011-Jun2011 = Q12012
Jul2011-Sep2011 = Q22012
Oct2011-Dec2011 = Q32012
Jan2011-Mar2012 = Q42012
means if its 1st April, 2012,
its a new Fiacal Year 2013 so Fiacal Quarter Name should be Q12013
and its Current Quarter Name should be Q22012
Can you help me to calculate this in a select query for given dates?
Thanks in advance,
NiravThis should do it..
Select
FORMAT(datepart(quarter,getdate()),'Q#')+FORMAT(getdate(),'yyyy') -
What are the minimum CPU and Memory requirements for R12 Vision instance?
We are in the process of trying to figure out what the minimum hardware requirements are for installing the R12 Vision instance. This Vision instance would only have 5 or less concurrent users. We may have to order a new server and we are wondering what the minimum CPU and memory would be? Oracle Support will not give us this information.
We aleady know how much disk space it will need.
DanHi,
See these links.
A Primer on Hardware Sizing for Oracle E-Business Suite
http://blogs.oracle.com/stevenChan/2010/08/ebs_sizing_primer.html
What Are the Minimum Desktop Requirements for EBS?
http://blogs.oracle.com/stevenChan/2010/09/ebs_pc_clients.html
Also, please see old threads for similar discussion.
Hardware Requirements
http://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Benchmark
http://forums.oracle.com/forums/search.jspa?threadID=&q=Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Best back up software and hardware requirement for the same
Good morning to all,
I would like to know about back solutions. We are a small organization around 60 employees, currently we have windows server 2008 r2 and using symantec backup exc and we back up on external USB drives. Management not happy with Symantec
We plan to upgrade our servers , and moving to VMs and plan to implement network storage.
So we want a back up solution which could back up VMs ,Shared folder and other required data.
What are the best practice and solutions for backups.Nopes :)
It depends on you. I've been using Symantec from many years now ;)
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
What are the disc space and memory requirements for the apps?
What are the disc-space and memory requirements to run the apps
Hello John!
thank you for the info. However, as I have only 1Gb memory and a 32Gb
solid-state disc, I think that I will stay with Acrobate.com for a while
longer.
Regards
Brianb -
Maximum user and hardware requirement for SAP B1
Dear All,
One of our prospect said that they will need 80 users and 160 connections to servers. And every year there will be additional user growth as much 30. What will be the hardware requirement for that ? has SAP B1 installed in that kind situation ? I appreciate your answer.
Rgds,Mark,
Please refer to the following PDF
https://websmp206.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000270512007E&_SCENARIO=01100035870000000183&_ADDINC=
Regarding 80 user initially with a growth of 30 user every year should not be a problem, but you might want to consider the volume of transactions to determine the performance aspect of the system.
Also check the following link
https://websmp206.sap-ag.de/smb/sbo/resources
Good luck
Suda -
Reporting accuracy, and OS requirements for updates?
Maybe I am not doing "Software Updates" or "Device Collections" right, but I have a collection of computers I'm deploying Software Updates to.
The Software Update package currently only consist of Windows 7 updates.
The collection I'm deploying to, however, has a few Windows 8 computers in it.
Because of this, the Windows 8 computers skew the "Compliance" reports for this software update package, indicating the computers are in a "Compliance unknown state".
Is there a way I can configure Software Requirements for Software Updates (like Win 7 x64 only);
or what's the solution here for accurate reports?
make a different collection for Windows 8 computers? Add Windows 8 updates to the package?If the Windows 8 PC are listed as unknown then there is a GPO or local policy blocking them from scanning for SU. This will have nothing to do with how your collection are setup.
On one of Windows 8 PCs that is affected, review all the GPOs and determine which GPO is overriding CM12.
http://www.enhansoft.com/ -
Functional and technical requirements for CFTE
Hi all,
I have to prepare a pre sales meeting. the potential customer needs to know the functional and technical requirements to implement Cloud for travel and the technical limit. I found some information in the document SAP_OD_TECHNICAL. Does someone has further information ?
Thanks in advance for your help,
best regards,
lucie POLESEPlease refer to the Master Guide and Security Guide located at the link below (you have to select the latest release once you go to the page):
https://help.sap.com/travel-od -
Need to make # of periods and frequency required for certain prod category
We have a requirement to make the # of periods and frequency fields required for a certain product category. I know I need to use a field validation for this but my issue is that the product category and product name fields are non-editable. I tried putting the validation on the product ID field but it is not working properly. It still throws the error even when values are entered and regardless of the category. Here is the expression I am trying to use:
IIf(FieldValue('<ProductCategory>')="XYZ", [<NumberOfPeriods>] is not NULL, FALSE)
Any ideas?You can add the read-only token ($RO$) after any of the segments in the list. For example, the ($RO$) designator below sets Segment1 in structure code 1 to be read-only:
Structure code1|Segment1($RO$)|Segment2...
P.S: After I posted this message, I realized this was not what you are looking for. After all, this may help somebody.
Edited by: dbhat1 on Dec 8, 2008 3:55 PM
Edited by: dbhat1 on Dec 8, 2008 3:56 PM -
Minimum parameters and values required for 11g database
Hi
Can anyone please provide me with the list of parameters and the minimum value required for these parameters in 11g database (11.1.0.6.0).
Thanksuser8940828 wrote:
Thanks for your help
But this basic parameters did not mention the following parmeters . What can be the mimimum value that can be assigned to these parameters.
dml_locks
log_checkpoint_interval
log_checkpoint_timeout
open_cursors
open_links
parallel_max_servers
processes
session_cached_cursors
session_max_open_files
job_queue_processes
log_buffer
shared_pool_size
sort_area_retained_size
sort_area_size
db_cache_size
pga_aggregate_target
ThanksI suggest you to start letting the default parameters and then tune them step-by-step.
Eg:
- open_links => If you dont have database links you can avoid to set it.
- processes: number of backgroud processes + expected session/users for your application. if you have 1000 users connecting at the same time you would set a value higher than 1000.
- shared_pool_size, db_cache_size, sort_area_size, pga_aggregate_target are not mandatory if you use automatic memory management by Oracle.
- etc.
Maybe you are looking for
-
Hi...... When i am running standard report MB5B to calculatte opening stock and closing stock on the output screen i am getting one table with no data selected and the below screen shot of that MB5B report is attached in this discussion please go thr
-
hi... i am trying to useing java 2EE with linux (ubuntu) like.(servlet , jsp , ...). first : i downloaded java sdk and set the enviroment variables (PATH , CLASSPATH , JAVA_HOME ) right. second i downloaded tomcat (Servlet Container ) ,configure it a
-
Failure to update and now launch InDesign CC 2014
Yesterday I updated all Adobe CC applications on all iMacs in my institution's labs. On each iMac, the InDesign update was the only one to fail. The error code gives no technical reason and the only solution is to reinstall the program. This is not a
-
PC Tools (without asking) installed a program called Browser Defender in Firefox. Uninstalled it but now when I type a search question into the address box (not the Search box) up comes PC Tools Search Defender with its version of a search engine. Ho
-
Use iMessage with iCloud email alias?
I set up iCloud with my old .mac / mobileMe account. So far no trouble. But I've been using some email aliases that I use for actually emailing and kept the "core" email address (the iCloud log in) a "secret". (Just because I'm afraid of spam. An ali