MM42 does not pick up the updated data from MARC

Hi ,
We are updating MARC values (RP type : DISMM and Minimum Safety Stock: EISLO ) for articles through our Z-development using the UPDATE statement.
Although the MARC is getting updated with new values, when I enter the article nuber in MM42, it shows old RP type and old Minimum Safety Stock: only.
Any idea about this issue?

Hi there,
One of the most obvious reason for this non-update of MARC for replenishment fields with your Z program is that you might be trying to upate the MARC through front-end which leads to table locking among MARC, WRPP and WRPL.
There are tow ways to get it done now, 1st way is to increase the system performance to aviod such table locking but still there will be chances of table locking with some user activity for an article(s) (in mm42 or other transactions where get locked for changes) which is part of the update and article master is accessed at that time.
Second and more suitable way is to do a direct update to WRPP which in turn update the WRPL as WRPP is reference table for WRPL and MARC will get updated from WRPL and its the reference table for MARC. Change your Z program accordingly.
I have successsfully resolved a similar issue with such arrangement and above is a summary of my investigation and solution designed earlier.
I hope your query is reasonably answered, please award the points accordingly.
Kind Regards,
Kunwar

Similar Messages

JRE does not pick up the existing font installed in the OS

Hi,
I am developing an application that required to display UTF-8 string in different language, eg. Japanese, Chinese,..., and having some problems with using font
to display those strings.
I. Problem:
For some reasons, the JRE does not pick up the fonts in either jre/lib/fonts or OS's fonts folder (Windows\Fonts) to use to handle these strings. This results in square boxes displayed.
II. Temporary solutions found:
I searched and found the following solutions
1. Put the font in the fallback folder under jre/lib/fonts
However, this requires to bundle the application with the fonts, it has some problems
* Bundles all possible fonts significantly increase the size of the JRE
* It is a waste if the OS already has the font (as in my case Arial Unicode MS font already installed). 2. Modify the font.properties file *<- which is not recommended.*
III. Questions:
1. So I am wondering if anyone knows other solutions to this problem?
2. I came across some sites that says JRE will pick up the font correctly for a language if the OS is localized on that language. Is it true since I could not yet find that statement on sun website?
Any help or advices are greatly appreciated.
Phuong,
PS: I'm using JDK 6 update 6, Windows XP English version

Hello,
Do any black bars show on the Airport icon at all?
I have a 2007 iMac that can barely see my Base Station 4 feet away, an older eMac 7 feet away sees it great!
On my iMac I use one of these...
http://eshop.macsales.com/item/NewerTech/MXP2802GU2/
And a USB extension cable can give even better range/speed.

Why wsgen does not pick up the changed interface in wsdl.jsp?

Hi,
After I changed the type of return value in a method in a stateless EJB. The wsdl.jsp
generated by wsgen does not pick up the changed interface (it still has the old interface).
The installed ejb works well with new type of return value. But the web service (wsdl.jsp)
and client.jar does not work. At begining I thought it might be cached. So I cleaned
the cache in the browser and temporal directory inside wls domain. I also deleted
all old version of ejbs on my local disks. But there is no effect. I am confused.
Please help. Where does the wsgen looking for when generating wsdl.jsp?
Thanks a lot.
Jim

Hi,
Please check the following path if your application is deployed or not properly if you are using eclipse:
Workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps

System is not picking up the WBS element from Asset in PO.

Hi,
While creating Purchase Order with account assignment category
as "A"(i.e.Asset), system is not picking up the WBS element from Asset
Master, even though it is defined in the asset master.
Please help.
Thanks,
Ninad

Hello Ninad,
Please, see the SAP Note 21583. I think it might be of help for your case.
Best regards,
Esther.

Custom Manage Property does not pick up the value from mapping crawl property

Hi All,
I have created a custom list with the column name that's called "category".
Then I ran full crawl and I saw the "ows_category" crawl property is created.
Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
After full crawl, I searched Category:keyword but it returned 0 result.
But when I search keyword, that list item is retuned
I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
Do you have any suggestion?
Do I need to reset the index?
Best Regards,
Andy

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Field BSEG-HKTID does not exist in the additional data Screen

Hi
We are facing a problem while posting the parked document. Field BSEG-HKTID does not exist in the screen SAPLF040 0331.
As we want to avoid entering the field-data at the time of payment proposal run using T.code F110, we prefer to enter at the time of posting a parked document or at the time of parking.
We had checked the field status (of Posting key and GL) and its not available.
We refered note 953374 House bank details: Account ID in the document. It asks to activate the RE-FX component. However, we are not in the real estate business hence not logical to do so. How do we need to proceed?
PP

To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
LOOP AT SCREEN.
IF sy-tcode = 'FB02'.
    IF screen-name = 'BSEG-HKTID'.
      screen-input = 1.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
elseif sy-tcode = 'FB03'.
      IF screen-name = 'BSEG-HKTID'.
      screen-input = 0.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
endif.
ENDLOOP.
and, all ready.

My jsp page is not displayed - tomcat does not pick up the class file

Hi everybody,
I have a Java code which is a controller for a jsp page, called: HomeController.java. Code is as follows:
@Controller
public class HomeController {
protected final transient Log log = LogFactory.getLog(getClass());
@RequestMapping(value = "/mypage")
    public String home() {
        System.out.println("HomeController: Passing through...");
        return "home";
}There is nothing especial in the jsp page: home.jsp. If I go to this url:
http://localhost:8080/adcopyqueue/mypage
I can view mypage and everything works fine. Also in the tomcat Dos page I can see the comment:
HomeController: Passing through...As expected.
Now under the same directory that I have HomeController.java, I've created another file called: LoginController.java. Following is the code:
@Controller
public class LoginController {
protected final transient Log log = LogFactory.getLog(getClass());
@RequestMapping(value = "/loginpage")
public String login() {
        System.out.println("LoginController: Passing through...");
        return "login";
    }And under the same place which I have home.jsp, I've created login.jsp.
Also under tomcat folders, LoginController.class exists under the same folder that HomeController.class exists and login.jsp exists under the same folder which home.jsp exists.
But when I go to this url: http://localhost:8080/adcopyqueue/loginpage
Nothing is displayed! I think tomcat does not pick up LoginController.class b/c on the tomcat Dos window, I do NOT see this comment:
LoginController: Passing through...Instead I see following which I do not know what do they mean?
[ INFO] [http-8080-1 01:43:45] (AppInfo.java:populateAppInfo:34) got manifest
[ INFO] [http-8080-1 01:43:45] (AppInfo.java:populateAppInfo:36) manifest entrie
s 8The structure and the code for HomeController.java and LoginController.java plus the jsp files match. I have no idea why tomcat sees one of the files and not the other?
Clean build did not help. Does anybody have any idea? Any help is greatly appraciated.
Edited by: ronitt on Nov 16, 2011 3:55 PM

Hi,
Please check the following path if your application is deployed or not properly if you are using eclipse:
Workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps

Delta load does not pick up the new records.

Hi All,
My asset has a transaction in the ECC. In BW system for that asset, I have master data that asset posting period is 01/2008. I ran the delta today but my delta does not pic up the asset. what might the problem? how can i go ahead. here the extractor is 0FI_AA_11.
Kiran

Hi ,
first check wether there are any records in rsa3 for that data source ..
Regards,
Shikha

I have a 5 year old Imac. it does not pick up the wireless internet signal in the same location that my new laptop does. Is there anything I can do to it to fix that?

I have a five year old Imc that does not pick up a wireless signal in the same area that my laptop does - is that just because it is old? Is there a card widget I could add to the IMac?

Hello,
Do any black bars show on the Airport icon at all?
I have a 2007 iMac that can barely see my Base Station 4 feet away, an older eMac 7 feet away sees it great!
On my iMac I use one of these...
http://eshop.macsales.com/item/NewerTech/MXP2802GU2/
And a USB extension cable can give even better range/speed.

How to display the updated data from db to user interface in sruts framewor

A beginner in this area, I have been able to read a record from a
MySQL database and populate in jsp form . Now, my goal is to
allow the user to edit the contents of the form and then update the
record in MySQL and then display the same in jsp. page
The scenario in detail
1)the data is fetched from db and displayed in non-editable format
2)Next button is clicked
3)Now in the same jsp page I view the same data from db in editable format
4)The user is allowed to change the information
5)Now update button is clicked
6)the records are updated in the db -Finished doing till this step
7)But the updated info in non - editable format to be displayed in jsp page is left pending.
Here is my code for jsp,i want know how to write an action for this,tried doing the same in java and I'm successful.but what I need is how to fetch the updated information in the user interface.
I've made both editable as well as non editable info in the same page with different actions.
pl help me,I'm a newbie
<%@ taglib uri="/WEB-INF/struts-bean" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic" prefix="logic" %>
<%@ page language="java" %>
<%@ page import="java.util.ArrayList,java.util.Iterator" %>
<%@ page import="com.finocus.common.container.CustomerDetailsTest;" %>
<html:html>
<head>
 <title>CUSTOMER DISPLAY</title>
</head>
<body>
 <table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><table width="100%" bgcolor="indigo">
 <tr>
 <td>Display</td>
 <td>Update</td>
 <td>Verify</td>
 <td>Confirm</td>
 </tr>
 </table>
 </td>
 </tr>
<%
 //Container for holding data
 ArrayList list = (ArrayList)session.getAttribute("CUSTOMERDETAILS");
 Iterator itr=list.iterator();
 while(itr.hasNext())
 CustomerDetailsTest cust = (CustomerDetailsTest) itr.next();
 System.out.println("testGetCustomerDetails()-successed. retrieved CustomerDetailsTest="+cust.toString());
%>
<%
 //Session for checking whether edit or non-edit mode
 String pageMode = (String)session.getAttribute("CUSTOMER_PAGE_MODE");
 session.removeAttribute("CUSTOMER_PAGE_MODE");
 if(null==pageMode)
 pageMode = "EDIT";
 if(pageMode.equals("EDIT"))
 //display data in the form
 System.out.println("Editable mode");
%>
 <html:form action="/nonedit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><html:text property="name" value="<%=cust.getCname()%>"/></td>
 <td><bean:message key="label.cphone"/></td>
 <td><html:text property="phone" value="<%=cust.getCphone()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><html:text property="address1" value="<%=cust.getCaddress1()%>"/></td>
 <td><bean:message key="label.cemail"/></td>
 <td><html:text property="email" value="<%=cust.getCemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><html:text property="address2" value="<%=cust.getCaddress2()%>"/></td>
 <td><bean:message key="label.cfax"/></td>
 <td><html:text property="fax" value="<%=cust.getCfax()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><html:text property="city" value="<%=cust.getCcity()%>"/></td>
 <td><bean:message key="label.czip"/></td>
 <td><html:text property="zip" value="<%=cust.getZip()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><html:text property="state" value="<%=cust.getCstate()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><html:text property="adminname" value="<%=cust.getAname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><html:text property="adminemail" value="<%=cust.getAemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><html:text property="adminphone" value="<%=cust.getAphone()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><html:text property="adminusername" value="<%=cust.getUname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><html:text property="adminuseremail" value="<%=cust.getUemail()%>"/></td>
 </tr> 
 <tr align="center">
 <td><html:cancel value="Cancel"/>
 <html:submit value="Next"/></td>
 </tr>
 </html:form>
<%
 }else
 //display data in the text
 System.out.println("Non-Editable mode");
%>
 <html:form action="/edit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 <td><bean:message key="label.status"/></td>
 <td><%=cust.getStatus() %></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><%=cust.getCname()%></td>
 <td><bean:message key="label.cphone"/></td>
 <td><%=cust.getCphone()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><%=cust.getCaddress1()%></td>
 <td><bean:message key="label.cemail"/></td>
 <td><%=cust.getCemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><%=cust.getCaddress2()%></td>
 <td><bean:message key="label.cfax"/></td>
 <td><%=cust.getCfax()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><%=cust.getCcity()%></td>
 <td><bean:message key="label.czip"/></td>
 <td><%=cust.getZip()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><%=cust.getCstate()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><%=cust.getAname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><%=cust.getAemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><%=cust.getAphone()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><%=cust.getUname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><%=cust.getUemail()%></td>
 </tr> 
 <tr align="center">
 <td><html:submit value="Update"/></td>
 </tr>
 </html:form>
<%
%>
<%
%>
 </table>
 </td>
 </tr>
 </table>
</body>
</html:html>

u r using action classes. so after calling the insert method in Action Class to a dao... the next statement should be retrieve statement. so at the time of updating first it will get updated.. the next statement it will execute is retrieve and then set these details in VO or FORM and show it on JSP
Message was edited by:
leo_michael

24.7.0 update link does not connect to the update server

FirefoxESR 24.4.0 was bundled with Debian. For several days, I have gotten a popup message to install the security update, 24.7.0. The Mozilla link from within Firefox says I have the most up-to date version (24.4.0). Apper software manager says everything is current. Every time I click on the install link in the popup, the download window stays on the "connecting to update server..." screen indefinitely, never connecting. Firefox and everything else works fine, there is no apparent reason from this end why connection should not take place.

"The Debian build of Firefox 24.4.0esr is Not updated by Mozilla but by Debian."
Correct.
"If the 24.4.0esr you are trying to update is actually from Mozilla and not a third-party build then make sure the folder has read/write permissions for that Linux user."
It never gets as far as permissions or actually trying to download an update. When Firefox checks with Mozilla using Firefox's internal update check, it comes back as 24.4.0 being the latest version.
"The Firefox tarball from Mozilla.org is certainly not a one time install. "
What I meant by one time install is that nobody would go through the effort more than once, and then only if there were extraordinary circumstances.
"If you put it in a folder in Home or make sure the folder has read/write permissions if you put it elsewhere then you should get updates from Mozilla as they are released. "
The current version received an update notice from Mozilla. The link tries but never connects with the update server.
"The updates are by .mar files whether on Windows, Mac OSX or Linux. "
I've used Firefox for years, with both Windows and Linux. I've never had to deal with .mar files or .tar files, or manually installing. Everything has always been a one-click automated install for both initial installation and updates.
Also, I don't want to perform a manual install unless it is for critical software, like needed drivers, and there is no other way. I would like to let the system do the work of keeping track of everything installed and its update status. I switched to Debian stable for the stability and am generally trying to avoid introducing software from outside of the tested stuff in their repository. The only reason I've pursued this update at all is that it is a security update and installing it shouldn't really affect Debian's status tracking (unless I stick the new version somewhere else).
I'm assuming that sooner or later, Mozilla will fix whatever problems are preventing the update from working correctly, or Debian will put 24.7.0 in their repository.

The icon on my message app does not work since the update, the recipient is set up to use it, my grandchildren

The sent icon on my ipad doesn't work since the update to ISO 7.06 the recipients are set up to receive messages

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

Workspace Form Not being Rendered with Updated Data from previous level

Hi
I have a process in wherein a reader extended PDF form is filled and kept in the watch folder.
Then the PDF is picked up and a two level approval process starts in Workspace.
The initial step in my process takes the PDF document and extracts the XML data ("processFormSubmuission")
Then I have an "Assign Task" where I have an xfaForm variable (lev1form) as input, where I use Sample Forms/ RenderPDFForm to render the PDF form in Workspace.
I have also configured the Submit service using sample forms / submit PDF form.
At the initial level the form is populated correctly in Workspace
But if the user edits the form and passes it on to the next level of approval,
the edited data is not displayed to the next user It show the same old watch folder submitted data.
How do I reflect the changes? Can I update the xml file somehow upon submission at first level?
I also tried using a different xfaForm variable (lev2form) configured using default render service. As output of the first assign task.
But it does not work this way too..
Please help me how I should go about now..
Thanks..

When you extract the data from the form it is already XML.....or it should be. I do not use ProcessFormSubmission .... there is an easier way - under Common/Form Data Integration there is an Export Data service that will take your form as input and create a document that contains your data as output. You can then use a setValue to change the doc object into an xml object (doc object on right, xml object on left). Once it is xml you will need to see what the format is so either write it out or dump it to the log. Ultimately you want to get down to the forms root node and set that and all of its children to the xfaForm variable. The xfaForm variable is a complex object that has multiple nodes beneath it. Use a setValue service to put the xml you extracted into the xfaForm Var. In the XPath editor you can expand it out and put the xml data under this node:
xfaFormVar/object/data/xdp/datasets/data
Now your xfaForm var is ready to go

AE not reading all the XMP data from DNG files

I'm working on a very large time-lapse for a construction company - I have a sunset that is broken between two folders and rendering the folders seperately makes Quicktime unhappy during playback and I get an ugly jump in sunset exposure.
So I combined the two folders in Lightroom (LR) from my RAW files (NEF) and exported the entire sequence as DNG files with simpler numbering. The sequence is about 1560 files and constitutes about 22 GB of data. I created a new LR library from the DNG sequence to make sure it all looked good and it does.
I imported the same DNG sequence into AE, checked a few frames in the preview and sent it out to render. Two thirds of the way through the QT movie, exported in H.264 at 30 fps, I start seeing problems. Huge sections look like the XMP data has not been read, then there's a good section and then bad again. I matched the movie time to preview in AE and indeed saw the same problems in the AE preview. So the problem begain in AE's reading the files from the folder, not in rendering.
I went back to LR for file comparison. There was no problem in LR. All the DNGs look great.
I'm on a MacBookPro Retina with 2.8 GHz Intel processor, 16GB 1600 MHz DDR3 Ram and NVIDIA GeForce GT 650M 1024 MB graphics
I have the standard 69GB cache on an external drive and have 11GB RAM available for AE.
Installed CPUs =8
CPUs reserved for other apps = 2
RAM allocation per background CPU = 1GB
Actual CPUs that will be used = 6
I have the latest AE from the Adobe Cloud, although I haven't done the most recent update yet.
My thought was to break the folder up into smaller segments for rendering, but that's not the problem. I see the XMP hasn't been consistantly read in preview. To me it doesn't make sense that the folder is too large for preview because it's not even rendering it there, just reading the files...?
Any insight, solutions?
Thanks,
Dennis

Moominman wrote:
I am basically trying to export xmp files from a set of low resolution dng files so that I can access my Lightroom edits in the RAW files. I have separated the RAW and dng files in different folders
Hi Andy,
I dunno how best to get extracted xmp files into the raw folders, but if you are comfortable with exiftool, you can use it to extract xmp sidecars from DNG files.
If you want a turn-key solution which does not required you to futz with exiftool, then consider a free plugin I wrote:
robcole.com - xEmP
It will allow you to create xmp sidecars with all your DNG adjustments and metadata (which can then be applied to the non-dng raw files).
However, if you won't need the DNGs in your catalog afterward, then the easiest way is to convert them back to proprietary raw format using this plugin (also free, and I wrote it):
robcole.com - UnDNG
Conceptually, you can think of it as converting the DNGs to proprietary raw format, but note: it doesn't convert anything, it just allows existing raw files that are NOT in the catalog, to replace the DNGs that are in the catalog. All adjustments and metadata and everything else will be preserved (just like when you convert a proprietary raw to DNG format).
Rob

How to get the updated data from a third party database in office 365 list

Hello - I am trying to access a third party software database to create a dynamic Dashboard in SharePoint, and my approach is :-
Sync the 3rd part database in list (should get sync in list whenever new data is added to the 3rd party database) or if possible syc the data from CSV file to sharepoint list.
I need to get that data into Giant chart or Dashboard
any help will be highly appreciated.
Thank you!

There are many options available in SharePoint Online office 365 for connecting to External data e.g. external lists, Business Data Web Parts etc. Please check these urls for more details -
Introduction
to external data
Use
external data in workbooks in SharePoint Online
Overview of Business Connectivity Services in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

MM42 does not pick up the updated data from MARC

Similar Messages

Maybe you are looking for