MMDB database not created

Hi
I have install primavera P6 in
my system,it is client PV application.
Before
that i have created PMDB and MMDB databse in MS SQL
2005.
Project management module has been
install successfully but methodology management module is
not install.
Database error comes.Eventhough
databse is created in MSSQL 2005 database configuration
problem comes with following error msg:
Bad
public user name or password. Database Server Error: Login
failed for user 'pubuser'.
Cannot open database
"mmdb$primavera" requested by the login. The login
failed.;
So kindly help me out in
this matter.
Regards,<br
/>Jyotir

Did you create accounts for "pubuser" and "privuser"?
If so then try running the below SQL query against
your database:
EXEC
sp_change_users_login
'Update_One','pubuser','pubuser'
EXEC
sp_change_users_login
'Update_One','privuser','privuser'

Similar Messages

  • Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created

    Hi There,
    As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
    DCRServer is down or may not be completely up. Check if the DCRServer process is running.
    And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
    1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
    2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
    Thanks,

    Also Here is more info output:
    C:\Program Files (x86)\CSCOpx>pdshow -brief
      Process               State                                     Pid
      Tomcat                Program started - No mgt msgs received    1572
      TomcatMonitor         Running normally                          2236
      Apache                Program started - No mgt msgs received    2436
      DataPurge             Administrator has shut down this server   0
      DCRServer             Failed to run                             0
      CMFOGSServer          Administrator has shut down this server   0
      EssentialsDM          Administrator has shut down this server   0
      ConfigMgmtServer      Never started                             0
      ConfigUtilityService  Never started                             0
      CTMJrmServer          Administrator has shut down this server   0
      ChangeAudit           Never started                             0
      SyslogAnalyzer        Program started - No mgt msgs received    2976
      ICServer              Running normally                          5096
      EnergyWise            Never started                             0
      PMCOGSServer          Administrator has shut down this server   0
      IPMOGSServer          Administrator has shut down this server   0
      IPMProcess            Never started                             0
      TISServer             Program started - No mgt msgs received    2544
      DFMOGSServer          Program started - No mgt msgs received    876
      InventoryCollector    Running normally                          3052
      Interactor            Program started - No mgt msgs received    5136
      InventoryCollector1   Program started - No mgt msgs received    5144
      Interactor1           Program started - No mgt msgs received    5308
      PTMServer             Program started - No mgt msgs received    5320
      UPMProcess            Never started                             0
      TISDiscoveryJobCreate Administrator has shut down this server   0
      SyslogCollector       Running normally                          5340
      Proxy                 Program started - No mgt msgs received    5348
      PMServer              Running normally                          5360
      NameServer            Program started - No mgt msgs received    5680
      NameServiceMonitor    Running normally                          5876
      LicenseServer         Program started - No mgt msgs received    5884
      FHPurgeTask           Never started                             0
      EventFramework        Program started - No mgt msgs received    5892
      EPMServer             Program started - No mgt msgs received    5904
      FHServer              Administrator has shut down this server   0
      NOSServer             Program started - No mgt msgs received    5580
      diskWatcher           Running normally                          5640
      DFMMultiProcLogger    Program started - No mgt msgs received    5864
      DFMLogServer          Program started - No mgt msgs received    4896
      DFMCTMStartup         Administrator has shut down this server   0
      DfmBroker             Running normally                          6104
      DfmServer             Running normally                          6416
      DfmServer1            Running normally                          6424
      DCRDevicePoll         Never started                             0
      CSRegistryServer      Running normally                          6432
      CSDiscovery           Never started                             0
      AdapterServer1        Program started - No mgt msgs received    6440
      AdapterServer         Program started - No mgt msgs received    6448
    C:\Program Files (x86)\CSCOpx>pdshow DCRServer
            Process= DCRServer
            State  = Failed to run
            Pid    = 0
            RC     = -3
            Signo  = 1073741821
            Start  = N/A
            Stop   = 07/02/2012 17:39:06
            Core   = Not applicable
            Info   = Application failed or was registered incorrectly.
    C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
    The Cisco Prime Daemon Manager service is stopping..........................................
    The Cisco Prime Daemon Manager service was stopped successfully.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
    ERROR: [StandardDbUpgrade] : Database cmf is not installed.
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
    ERROR: There is no database available to change password.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
    'cmf' is not a valid data source for the product.

  • HPCM - Manage Database not creating outline in Essbase application

    Hi,
    I've created the HPCM application from EPM 11.1.2.1 and I have also created the Stages, POV , Drivers and assignments but I cannot do data entry since the Essbase cube outline itself is not created.
    I've gone to Manage Database -> "Deploy Now" several times to no avail . The Application and the Database gets created in Essbase but when I open the outline it is Blank!
    My taskflow keeps showing the Status as "Done" but result variable as "Failed". Can anyone suggest what I'm doing wrong here? Or is there any setting/configuration in HPCM or Essbase that I need to set before I Deploy the HPCM application Calulation database and Reporting database?
    Below is the Taskflow message I get :
    Taskflow Participant Summary
    Id wf-1330001062632 Application HPCMCG
    Taskflow HPCMCG_DeployCube_D20120223T074416_e3f Initiator user1
    Started Feb 23, 2012 7:44:22 AM Status Done
    Description Run Now button initiated workflow
    Participant Stage Name Status Result Variable Status Message Completed
    user1 CalcCube Done Failure Action failed Feb 23, 2012 7:51:16 AM
    Edited by: user8540032 on Feb 23, 2012 5:28 AM
    Edited by: user8540032 on Feb 23, 2012 10:24 PM
    Edited by: user8540032 on Feb 23, 2012 10:28 PM

    Hi,
    I've got the solution. To solve this problem, you would need to configure the registry of the PC where HPCM client is installed with:
    TcpTimedWaitDelay
    Registry key=HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
    Data type=REG_DWORD
    Default value=0xF0 (240 seconds = 4 minutes)
    Valid values=0x1E to 0x12C (30 to 300 seconds)
    MaxUserPort
    Registry key=HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
    Data type= REG_DWORD
    Default value=20000
    Valid values= 5,000 to 65,534 (port numbers)
    In order to do this , you would have to do the following :
    1. Create a new REG_DWORD value named TcpTimedWaitDelay. Set the value to decimal 30, which is Hex 0x0000001e. This value sets the wait time to 30 seconds.
    2. Create a new REG_DWORD value named MaxUserPort. Set this value to at least decimal 32768 or 65534.
    3. Create a new REG_DWORD value named MaxFreeTcbs. Set the value to decimal 6250. (The default is 2000 so you are basically tripling this value.).
    4. Reboot the machine for the new settings to take effect.
    Regards,
    Jonathan

  • Database not creating using DBCA

    Hi,
    I installed oracle on solaris 10 sparc system
    when i try to create a database using dbca, it is not creating.
    after i click on finish button on dbca to create a database, database creating windows is not opening, i mean it is in same window, i clicked thousand times on that finish button, no windows is opening, nothing is happening.
    please help, i will really appreciate if anyone tell me how to resolve this issue.
    Regards,
    Veeresh S

    solaris server is 64 sparc
    and i installed oracle 10.2.0.1 64 bit for sparc 64
    now this is not working.
    can i install oracle 10.2.0.2 x86 in this sparc 64 bit server

  • Company database not created in SLD

    Hi Experts,
    I have tried to uninstall and reinstall the "Integration Solution for SAP Business One" but the databases under SLD doesn't shows. Anyone can help me to solve the problem? Thanks in advance!
    Regards,
    Horhe

    Hi Horhe........
    Please follow the below Procedure......
    1. Go to MS SQL Server and Login.
    2. Select Database which is not showing in SLD.
    3. Take Backup.
    4. Select the same database and Right Click and then Detach and then loigin in sap and refresh company list.
    3. Again go to MS SQL Server and Login.
    4. Right Click on Database Option and Attach the same database from C:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA this pathand atatach .mdf file of that database.......
    Then go to SAP and again refresh the company list.
    And then login to  Integration Solution for SAP Business One and SLD and then  check teh database.......
    Regards,
    Rahul

  • Database not created under RHL9, unable to login to sqlplus,

    I have installed Oracle9.2.0.4 in Red Hat Linux9 without dbca. While installing it showed me the error, unable to install dbca.
    It prompts for
    stop installation of this product only
    stop installation of all products
    While selecting the first option, atlast it showed me that "Installation of Oracle9i database was unsuccessful"
    But all the files are installed in my directory.
    Also i am unable to login to SQLPLUS.
    I have done uninstalling the products and installing more than three times.
    Help me.
    Regards,
    Raaj

    Hi,
    I have done all the settings as per instructions in http://www.puschitz.com/InstallingOracle9i.shtml. But still i am facing the same problem.
    When executing lsnrctl start or lsnrctl status in terminal, it shows command not found.
    I am unable to execute any database or sql command in prompt.
    It shows "command not found"
    Help me,
    Raaj

  • Database is not created in SQL server for Persistant Chat

    Hi All,
    We were deploying the Persistant Chat Lync 2013 Role. We have created the topology and published it. Then the Lync 2013 deployment is done on the Persistant Chat servers, while upgrading the cumulative servers soon after the deployment we are getting the
    error as :
    Test-CsDatabase : Cannot open database "mgc" requested by the login. The login
    failed.
    Login failed for user 'domain\username'.
    At line:1 char:1
    + Test-CsDatabase -ConfiguredDatabases -SqlServerFqdn
    SQL Server ...
    Get-MirrorState also was not giving the proper result. Then when I checked in the SQL server, we found that both mgc and mgccomp databases itself not created.
    Could someone assist how we can install the database now?? I googled but confused a bit. Servers are already LYNC deployed, so which command and procedure we need to follow to install the DB on SQL servers and also in mirror server.
    Never giveup till you get what to want.

    Please share Test-CsDatabase -verbose 
    And Get-MirrorState
    in details
    PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"

  • Database Initialiser does not create azure sql database

    I have a WPF application In the OnStartup in the app.cs I set the Database initializer and forced the context the initialise my database:
    Debug.WriteLine("Setting Initializer");
    Database.SetInitializer<MyContext>(new MyDatabaseInitializer());
    Debug.WriteLine("Declaring new context");
    using (MyContext c = new MyContext("MyContext"))
    Debug.WriteLine("Force the initialization");
    c.Database.Initialize(true);
    Debug.WriteLine("Done!");
    I created a sql database in the management portal of the azure.
    Copied the connectionstring it provided for ADO.net.
    But my database is not created.
    I also added a firewall rule but nothing happens. I Have no clue what to do.
    Can anybody please help me with this?
    If you need more information please ask i really have to get this sorted out.
    Thanks in advance!

    Hi Turkstra,
    I have tried to use EF to create Azure SQL database, it works as expect, the database 'jambordbcreate' appear in my SQL Azure, below is the detailed codes.
    using System;
    using System.Collections.Generic;
    using System.Data.Entity;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    namespace CodeFirst
    class Program
    static void Main(string[] args)
    Database.SetInitializer(
    new CreateDatabaseIfNotExists<SchContext>());
    using (var db = new SchContext("Server=tcp:****.database.windows.net,1433;Database=jambordbcreate;User ID=vote@***;Password=***;Trusted_Connection=False;Encrypt=True;Connection Timeout=30"))
    string name = "jambor";
    var student=new Student(){Name=name, ID="1a"};
    db.Students.Add(student);
    db.SaveChanges();
    db.Database.Initialize(true);
    public class Student
    public string ID { get; set; }
    public string Name { get; set; }
    public string age { get; set; }
    public string sex { get; set; }
    public class School
    public string ID { get; set; }
    public string Name { get; set; }
    public virtual List<Student> Students { get; set; }
    public class SchContext : DbContext
    public SchContext(string connection):base(connection)
    public DbSet<Student> Students { get; set; }
    public DbSet<School> Schools { get; set; }
    I suggest  you check your SQL connection, after run your code, please refresh azure portal to see whether your database is exist. Hope this give you some help.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Secure Store Service Application takes a lot of time and does not create the database

    Hi everybody,
    I was trying to configure sharepoint performance point and I was following the instruction. After I created the performance point services application I tried to creat the secure store service application. When I do this, the progress window stays open forever
    even after 2 hours. If I close the window, I will see that the secure store service and proxy app is created and the application pool also is created in IIS but the database is not and the application service is stopped. even when I want to delete it, it's
    the same story and the progress window stays until I close it manually. Nothing has been logged in the event viewer because it doesn't throw any exceptions.
    I don't think that I have permission issues on the database server side because I have created the performance point service app and the database is there. I have used the same credentials to crete the secure store.
    I have restarted the secure store service and IIS for many times and even the server itself.
    I'm wondering if anybody has had this issue because I couldn't find anything on the web.
    Thanks,
    Edwin 

    Alex, please ignore my previous answer. I found more information in the ULS. At the time that I started creating the service application by power shell these things are logged and they are repeated several times:
       it starts with:
    11/13/2013 15:19:55.52 PowerShell.exe (0x1698)                
    0x170C
    Secure Store Service          
    Secure Store                  
    esj6 High    
    Creating Secure Store Service Application 'Secure Store Service Application'.
    c402af0c-5ff6-4995-83b8-3f95210a8b3d
    11/13/2013 15:19:55.54 PowerShell.exe (0x1698)                
    0x170C
    Secure Store Service          
    Secure Store                  
    esj9 Medium  
    Creating "database object" 'SP_SecureStore' for application. At this time database is not created.
    c402af0c-5ff6-4995-83b8-3f95210a8b3d
    11/13/2013 15:19:55.54 PowerShell.exe (0x1698)                
    0x170C
    Secure Store Service          
    Secure Store                  
    esk0 Medium  
    Saving "database object" 'SP_SecureStore' in the config db.
    c402af0c-5ff6-4995-83b8-3f95210a8b3d
    11/13/2013 15:19:55.83 w3wp.exe (0x0944)                      
    0x0DB4
    Secure Store Service          
    Secure Store                  
    d4gx Verbose
    BackgroundTasks instance accesed.
    11/13/2013 15:19:55.83 SPUCWorkerProcessProxy.exe (0x13A0)    
    0x02B0
    Secure Store Service          
    Secure Store                  
    d4gx Verbose
    BackgroundTasks instance accesed.
    11/13/2013 15:19:55.83 PowerShell.exe (0x1698)                
    0x1740
    Secure Store Service          
    Secure Store                  
    f7wk Verbose
    StartTracker called for secure store ''
    11/13/2013 15:19:55.83 PowerShell.exe (0x1698)                
    0x1740
    Secure Store Service          
    Secure Store                  
    f7wl Verbose
    Tracker not started because call not made from Service Host.
    11/13/2013 15:19:55.83 WebAnalyticsService.exe (0x0A6C)        
    0x1B88 Secure Store Service          
    Secure Store                  
    f7wk Verbose
    StartTracker called for secure store ''
    Finally it says:
    11/13/2013 15:19:55.90 PowerShell.exe (0x1698)                
    0x170C
    Secure Store Service          
    Secure Store                  
    esk9 High    
    Secure Store Service Application 'Secure Store Service Application' created.
    c402af0c-5ff6-4995-83b8-3f95210a8b3d

  • Can not create directory error while creating database

    i am creating database using dbca in oel but when i try to do so i get an error saying can not create directory pawii
    and pawii is the sid
    actually oracle is installed on u01 and i am creating database in u02
    but this error is not allowing me to create database but when i try to create database in uo1 the database installed successfully but this is not happening when i try to create database in another mount point u02

    987018 wrote:
    so finally i had solved the problem myself as people like rukbat are very unhelpful in nature here
    all we had to do is we had to change the group of the folder to oracle and oinstall where we are going to create our new database :)Actually he tries to be quite helpful. But sometimes the help you need isn't the help you want.
    "When you need me but do not want me, then I must stay. When you want me but no longer need me, then I have to go." (Nanny McPhee)

  • DPM 2012 Install Fails, The Database was not Created ID 811

    Hi.
    I've tried installing DPM on a Standalone Server (SQL + DPM), and get the "Database was not Created" error. I initially tried DPM 2012 R2, and found that there is an issue with Disjoint Namespaces, so went to DPM 2012 SP1, but still getting
    the same error.
    The Install Account has full access rights (sysadmin) to the DPM SQL Instance, however cannot seem to get it right. The account using to do the install has full Enterprise admin, Domain Admin, Backup Operators & Administrators rights.
    When opeining SQL Managemet studio, I can see the database has been created but the setup fails and requires me to revert.Here is the last few lines of the Install Log File, please help I always mark as answer.
    2014-10-01 08:54:49 PM] Information : Configuration.DBConfigurator: Setting Read_Committed_SnapShot ON
    [2014-10-01 08:54:49 PM] Information : Creating tables
    [2014-10-01 08:54:49 PM] Information : Execute the SQL script
    [2014-10-01 08:54:49 PM] Data : FileName = "D:\Program Files\Microsoft System Center 2012\DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
    [2014-10-01 08:54:49 PM] Data : Arguments = -b -E -d DPMDB_S_PRODBACKUP -i MiniSetupDBConfiguration.sql -r -S S-PRODBACKUP\SCDPM
    [2014-10-01 08:54:49 PM] Data : Error code = 0
    [2014-10-01 08:54:49 PM] Information : Adding DPM Server entry in tbl_AM_Server table
    [2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.InstalledAgents
    [2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.EngineUICommon.DpmThreadPool
    [2014-10-01 08:54:50 PM] Data : Database connection string = Integrated Security=SSPI;server=S-PRODBACKUP\SCDPM;Pooling=false;database=DPMDB_S_PRODBACKUP;Pooling=false
    [2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_ProductionServer_Get to DPMDBReaders$S-PRODBACKUP
    [2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_HeartBeat_Get to DPMDBReaders$S-PRODBACKUP
    [2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Registering DPM category
    [2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding DPM Category to GlobalSettings table
    [2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding ConsiderOfflineMediaToCheckOffsiteReady to GlobalSettings table
    [2014-10-01 08:54:50 PM] Information : Add job definitions
    [2014-10-01 08:54:52 PM] Information : Creating schedules
    [2014-10-01 08:55:00 PM] * Exception :  => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception
    from HRESULT: 0x800706BE)
       at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
       at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
       at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
    [2014-10-01 08:55:00 PM] * Exception :  => The DPM database was not created.Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that
    it is running, and then run Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.DatabaseConfigurationException: exception ---> System.Reflection.TargetInvocationException:
    Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE)
       at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
       at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
       at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterSchedule(String scheduleXmlFile)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.PopulateDefaultScheduleDefinitionsInDatabase(DBConfigurationReader dbCfgReader)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.AddJobAndScheduleDefinitions()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.MiniSetupConfiguration.PopulateDB(Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
    *** Mojito error was: DatabaseCreateFailed; 0; None
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.Configure(Boolean existingDB, Boolean upgrading, String databaseLocation, String sqlServerMachineName, String instanceName, Boolean oemSetup)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.Configure()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallDpm()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
    *** Mojito error was: DatabaseCreateFailed; 0; None
    [2014-10-01 08:55:02 PM] *** Error : The DPM database was not created.
    Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that it is running, and then run Setup again.
    ID: 811
    [2014-10-01 08:55:02 PM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
    copied during installation.
    For details, click the Error tab.
    [2014-10-01 09:33:51 PM] Data : Error Code Web Link =
    http://go.microsoft.com/fwlink/events.asp?ProdName=Microsoft System Center Data Protection Manager&ProdVer=4.1.3313.0&EvtID=811&EvtSrc=MSDPM&LCID=1033&P2wAppId=p2wMsdpmEE

    Hi,
    Check the SQL Agent account on the remote SQL server and make sure the user account syntax is in the form of UserName\DomainName and not UserName@DomainName - if it is change it.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • Is it possible to create a copy of entire database, not the data, but just database structure?

    Greetings community,
    This question is related to EXPRESS edition.
    Let’s say that I have MyDatabase2014 and I’ve been populating it with some data during the year 2014. Before the end of the year, I want to prepare another database named MyDatabase2015, which should be empty, but of course it should have
    all tables, relations, indexes and stored procedures just like MyDatabase2014. The idea is just to change a connection string and to continue using the same app for the same job.
    So in SSMS, I right-clicked the database, choose script database as / create to / new query, but I didn’t get what I wanted. In query window I’ve got just create database statement, and below that few dozen of alter database set ansi this
    or that statements, and set many other things. However, no table creation was scripted. Also, no stored procedures have been created, and about users, and other security objects better not to start to talk about.
    I could have achieved that simply by right-clicking databases node and select new database. So what’s the point of “script database as”?
    Does this work in SQL server editions other than EXPRESS?
    When it comes to express edition, what’s the best practice to get the empty copy of a database?
    Thanks for any help.

    For scripting out the users and their permissions you can use this script
    -- Capture permissions for all users in a DB
    SET NOCOUNT ON
    DECLARE @Database varchar(max)
    SET @Database = '<Db_Name>'-- set the database name here
    IF EXISTS (SELECT * FROM SYS.SYSDATABASES WHERE name = @Database)
    EXEC('USE ' + @Database + ';
    DECLARE @temp table(Extract Varchar(MAX))
    INSERT INTO @temp (Extract)
    SELECT ''EXEC( ''''USE ' + @Database + '; IF NOT EXISTS (SELECT * FROM sys.schemas WHERE name = N'''''''''' + name + '''''''''')IF EXISTS (SELECT *
    FROM sys.database_principals WHERE name = N'''''''''' + name + '''''''''') DROP USER ['' + name + '']''''); ''
    FROM sys.sysusers WHERE islogin = 1 AND hasdbaccess = 1 AND name NOT IN (''dbo'')
    INSERT INTO @temp (Extract)
    SELECT ''EXEC( ''''USE ' + @Database + '; IF NOT EXISTS
    (SELECT * FROM sys.database_principals WHERE name = N'''''''''' + dp.name + '''''''''')
    CREATE USER ['' + dp.name + ''] FOR LOGIN ['' + sp.name + '']''''); ''
    FROM sys.server_principals sp
    JOIN sys.database_principals dp ON (sp.sid = dp.sid)
    AND dp.name NOT IN (''dbo'')
    INSERT INTO @temp (Extract)
    SELECT ''EXEC( ''''USE ' + @Database + '; IF NOT EXISTS
    (SELECT * FROM sys.database_principals WHERE name = N'''''''''' + dp.name + '''''''''')
    CREATE USER ['' + dp.name + ''] WITHOUT LOGIN ''''); ''
    FROM sys.database_principals dp left
    JOIN sys.server_principals sp ON (sp.sid = dp.sid)
    where dp.principal_id between 5 and 16383
    INSERT INTO @temp (Extract)
    SELECT ''EXEC( ''''USE ' + @Database + '; EXEC sp_addrolemember '''''''''' + User_Name([groupuid]) + '''''''''', '''''''''' + User_Name([memberuid]) +
    FROM sys.sysmembers WHERE User_Name([memberuid]) NOT IN (''dbo'')
    INSERT INTO @temp (Extract)
    SELECT ''EXEC( ''''USE ' + @Database + '; ''
    + CASE [a].[state_desc] WHEN ''GRANT_WITH_GRANT_OPTION'' THEN ''GRANT '' ELSE [a].[state_desc] END
    + '' ''
    + [a].[permission_name] + CASE class WHEN 1 THEN '' ON [''
    + [c].[name]
    + ''].[''
    + Object_Name([a].[major_id]) + ''] '' ELSE '''' END + '' TO [''
    + User_Name([a].[grantee_principal_id])
    + ''] '' + CASE [a].[state_desc] WHEN ''GRANT_WITH_GRANT_OPTION'' THEN '' WITH GRANT OPTION'' ELSE '''' END
    + ''''''); '' COLLATE Latin1_General_CI_AS AS [SQL]
    FROM sys.database_permissions a
    inner join [sys].[all_objects] b
    ON [a].[major_id] = [b].[object_id]
    inner join [sys].[schemas] c
    ON [b].[schema_id] = [c].[schema_id]
    INSERT INTO @temp (Extract)
    SELECT ''EXEC( ''''USE ' + @Database + '; ''
    + [a].[state_desc]
    + '' ''
    + [a].[permission_name]
    + '' TO [''
    + USER_NAME([a].[grantee_principal_id])
    + ''] '''');''
    from sys.database_permissions a
    where a.class=0
    INSERT INTO @temp (Extract)
    SELECT ''EXEC( ''''USE ' + @Database + '; ''
    + [a].[state_desc]
    + '' ''
    + [a].[permission_name]
    + '' ON SCHEMA ::''
    + '' [''
    + SCHEMA_NAME([a].[major_id]) +
    + ''] TO [''
    + USER_NAME([a].[grantee_principal_id])
    + ''] '''');''
    from sys.database_permissions a
    where a.class=3
    SELECT Extract AS [Extract] FROM @temp
    GO
    ELSE
    SELECT '--NO'
    GO
     

  • Why i can't not create new database in oracle 10g express

    why i can't not create new database in oracle 10g express?
    should i use oracle 11g standard edition?
    thanks

    In Oracle a schema is what a 'database' is in Sqlserver.
    And if you would have been aware about the limitations of XE, you would have known you can only create *1* (one) database using Oracle XE.
    However, probably you don't need a new database at all, and a schema will suffice.
    Sybrand Bakker
    Senior Oracle DBA

  • Index not created in database

    Hi,
    We need some guidance in creating indexes. Have created a table index with SE11. Chosen index, Non-unique, index on all databases.
    When details are displayed the following message appears "Index does not exist in in database system". Which steps should be proceeded to create the index in DB? And what's the purpose if it's not created in DB?
    What's the difference between creating indexes with tcode SE14 and SE11?

    Bruce,
    Check below details. It may help you.
    Note 912620 - FAQ: Oracle indexes
    Note 334224 - Important notes for creating indexes
    http://help.sap.com/saphelp_nw70/helpdata/EN/f2/31ad7d810c11d288ec0000e8200722/content.htm
    Thanks
    Sushil
    Edited by: Sushil Suryawanshi on Jun 3, 2009 4:39 AM

  • Could not create table on 'master' database

    Hello,
         I am new to the SQL Azure. When I tried to create table on master DB, i get following error.
    Msg 262, Level 14, State 1, Line 1CREATE TABLE permission denied in database 'master'.
    I tried to change role to 'db_owner' but have received following error.
    Msg 15151, Level 16, State 1, Line 1Cannot alter the role 'db_owner', because it does not exist or you do not have permission.
    I logged into master DB using the credentials I created while creating DB on the Azure. This is supposed to be 'sa'.
    My question is, does SQL Azure allow to create objects (tables, stores procedures, triggers) on master DB. If yes, what am I doing wrong? If no, why?
    My guess is that SQL Azure is not less than the On premises DB. It must be allowing objects creation on master DB.
    I have found a similar question on forum but I did not get the answer. Here is the link --> https://social.msdn.microsoft.com/Forums/azure/en-US/cbff1bd2-358f-4106-b238-ec369941099d/master-database-cannot-alter-the-role-dbowner.
    FYI, I have gone through following resources but haven't got solution for my problem.
    1) https://iainhunter.wordpress.com/2011/06/20/copying-databases-and-creating-users-and-logins-for-sql-azure/
    2) http://www.c-sharpcorner.com/forums/thread/126589/create-database-permission-denied-in-database-master.aspx
    3) http://stackoverflow.com/questions/20656943/how-do-you-change-the-owner-of-an-azure-database
    4) https://msdn.microsoft.com/en-us/library/azure/ee336235.aspx
    Thanks in advance.

    My question is, does SQL Azure allow to create objects (tables, stores procedures, triggers) on master DB. If yes, what am I doing wrong? If no, why?
    My guess is that SQL Azure is not less than the On premises DB. It must be allowing objects creation on master DB.
    For the answer of the question, you can read Joseph's. Azure SQL, so far, is less than the premise DB except its
    cloud-based advantage. There're many limitations like less T-SQL features supported.
    Azure SQL Database Transact-SQL Reference
    more links for your reference.
    Preview features
    Managing Databases and Logins in Azure SQL Database
    Eric Zhang
    TechNet Community Support

Maybe you are looking for