Mneumonics in Swing? How to enable them?

I'm looking at my buttons and would like to add mneumonics to them in order to use the Alt+<key> to select them. In other languages (VB and C for instance) you can use the '~' or '&' to accomplish this (i.e. E~nter would print "Enter" w/ the 'n' underlined and enabled...like a hot key).
How can you accomplish this in Java?

u can create a JMenu and add the following code to enable the ATL key:
jMenu.setMnemonic(KeyEvent.VK_F);
for pressing the Ctr - <key>
jMenu.setAccelerator(KeyStroke.getKeyStroke
(KeyEvent.VK_E,ActionEvent.CTRL_MASK));
Hope this will help !!

Similar Messages

ADF-SWING How to enable texfield bound to un-updatable database fields

My ViewObject has an attribute that i added manually what is calculated by a Sub Select.
I have checked the "Maped to column or sql expression" option in the view of the attribute.
An then put an expresion like this:
(SELECT DESCRIPTION FROM DEPARTMENT WHERE DEPT_NO = DEPT )
My View Object is over the Employee table.
When i arrange that attribute to an ADFSwing Panel as a TextField, that text field is Disabled and un-editable.
What i need is to enable that textfield to allow copy/paste.
Thanks

I know this, but as you say,this attribute can not be updated to any database field.
The attribute dont needs to be updatable just to be enabled so the usar can select and copy paste ...i hope that could be posible.
What i would like set the my own rules for the texfield document model that adf generate but i dont know how to do this...
Thanks

My printer settings have been disabled, how do I enable them again?

I can not access my internet connection for wireless printing because the printer settings have been disabled.
What is the procedure to retsore the settings needed for wireless printing?

Hi @Daveletterman,
Welcome to the HP Forums!
I noticed that your printer settings have been disabled, and you are wondering how to enable them again. I am happy to help!
For further assistance, I will need the following information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If the printer settings are disabled on the computer, or on the printer's control panel.
If there are any messages when trying to access these settings.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
Once I know this information, I will do some more research for you!
Thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Direct2D acceleration, heard it is in the b4 but how to enable it?

As the question stands is the Direct2D acceleration in this build and if so, how do you go about enabling it?

There is a lengthy discussion on Direct2D and DirectWrite, including details of how to enable them. See [http://forums.mozillazine.org/viewtopic.php?f=23&t=1775755 Direct2D & DirectWrite HW Acceleration For Minefield - Info • mozillaZine Forums] (Minefield is the code name for the development trunk builds that Firefox 4 betas come from)

How to enable disk utility verify/fix permissions

My iMac is running os x 10.6.8 snow leopard.
A month ago the system(software) was re-installed by apple store for a fixing of booting panic.
It's all fine know but I found the disk utility's verify/fix permissions functions were disabled. My question is: what'll cause this and how to enable them?
Thanks

elimqiu wrote:
It's all fine know but I found the disk utility's verify/fix permissions functions were disabled. My question is: what'll cause this and how to enable them?
You mean verify/repair disk, not permissions. Forget about repair permissions. It's a waste of time.
As for verify/repair, you cannot repair the volume you are booted from so you need to boot from some other bootable volume. That could be Disk Utility launched on your Installer dvd or a external bootable backup.

How to enable FC on 2040 Clustered Ontap?

I have demo system with one controller FAS2040 and Clustered Ontap 8.1.4In system manager 3.0 there are no fc interfaces listed.How to enable FC interfaces on 2040 Clustered Ontap?FC is licensed.How to enable them? Thanks

The only exception for cluster links is on 2040, it is using 1G ports And yes, 2040 supports Clustered Ontap, thats why I like NetApp FAS

How to enable points in Jive Forums?

Hi Experts, I´m facing an strange situation. we are working with EP 7.0 SP15 and Jive Forums patch 2 for SP15. When an user makes a question in the forum and someone replays, the scree says that you have to mark this question as useful or correct for giving points to the user who answer it but....
there is no points in the user or elsewhere....how to enable them? I´ve look for it carefully in the administrator iView and the only reference I´ve found is a system property called pointConcept.disabled ; = false . I´m not sure with the value. The standard one is true but there is no points and if you change it to false, it doesn´t work either....
Any ideas?
Thanks in advance.....

Hi Robert, thanks for your quick reply !!
I know that the functionality is not still available, but the problem is that in the forums delivered actually, you can see in the screens that they mention the points and also the screen says that you have to mark it as usefull or answered in order to encourage the rest of the users !!!
So the users starts asking....where are my points gone?
As I´ve said above, in the version of the forums delivered actually , you can see this messages!!!
If points are still not delivered.....how can we hide these standards screens?
Thanks in advance.....

[Troubleshoot] MSI Gaming 7 ~ How to enable XMP with HyperX Fury RAM?

Hi folks,
First time posting here and new to the MSI brand with a Gaming 7 and MSI GTX 970 Gaming 4G GPU. They are quite awesome so far.
Anyway, I'm also new to the intel world after using AMD chips for the past number of years and I am wondering what is this buzz about XMP profiles? My new RAM sticks support XMP according to their website. But I'm not sure how to enable them in the UEFI Bios. Videos show that there should be a button right above the GENIE OC but I dont see one. Can someone help me understand how to enable it?
Spec info:
Intel 4790k
Gaming 7 Motherboard
HyperX Fury RAM, 2x8GB (16GB) 1866mhz
EDIT: I cannot share external links but if you search xmp hyperx certifications you'll see that the RAM is XMP ready.
Thanks!

Quote from: rp00 on 03-June-15, 22:47:43
but if you set your mem settings to auto, it should pick up 1866 speed from SPD
Check with CPU-Z
Such is not possible. Programmed SPD settings to be used depend on the abilities of the memory controller (here means the cpu) used. The maximum specified memory support of an i7 4790K is DDR3 and DDR3L 1333/1600 (http://ark.intel.com/products/80807/Intel-Core-i7-4790K-Processor-8M-Cache-up-to-4_40-GHz). It is therefor impossible to run memory without an XMP extension (like the Fury sticks) on the platform in question above ddr3 1600 without setting speeds and timings manually.

How to enable installed themes compatible with FF 4 Beta 12

I previously installed various themes indicated as compatible with Firefox 4.0 Beta 12. But all of them are shown now as being (disabled) in the Add-on Manager.
How are these themes enabled? Thanks for your help.
My laptop's operating system is Windows Vista.

To see if they still work with 4 beta 12,you could install [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=external-fxbetarelnote Add-on compatibility reporter],which fill force incompatible add-ons and themes,some may still work,however not necessarily all of them,you will have to try and see which ones will.

I cannot enable my itunes, i disabled them in january now i want to enable them how

Can someone please tell me how to enable my itunes, i disabled them in January and i want to enable them

Make sure that you do not press the Shift key if you start Firefox.
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.com/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.com/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

Cookies got deleted, how do I enable them again?

cookies got deleted, how do I enable them again?

In general, deleting web cookies is not a recoverable operation. They're gone.
Most web sites will recreate cookes as and if needed. Often after logging into the web site.
If this is a result of a web site error message or web site requirements, what are the requirements are the error message(s) you are encountering? (It's possible to disable cookies entirely via a particular web browser's preferences settings, for instance, and some web sites require cookies for logins and related operations. And for tracking users.)

When i try to log into facebook all it says is "Cookies are not enabled on your browser" but i have enabled them. how do i log in?

When I try to log into facebook all it says is "Cookies are not enabled on your browser" but i have enabled them. How do I log in?

My guess is it's either a corrupt cookie or you have some add-on blocking cookies.
We'll need some more info about your Firefox setup. Go to '''Help > Troubleshooting Information''' then click '''Copy all to Clipboard'''. Open a reply to this post, and go to '''Edit > Paste''' to paste the info from your Troubleshooting Information page.

How to Enable MMS without BIS

How to enable MMS without BIS
This guide is for you if:
you have an BlackBBerry OS 7 device on a regular (non-BIS) data plan
and
2. you cannot send MMS (multimedia) messages.
Getting MMS working requires you to split, hex edit, merge and install service books, so read through the instructions and decide whether you’re up to it. I’ve attempted to explain everything as clearly as possible, but it’s a complex process and requires you to follow instructions carefully.
It's worth asking your carrier if they can just enable MMS for you. If they can and will, you don't need this guide.
Notes:
The process described here may also work on earlier devices with OS 4, 5, and 6, but I don’t have those devices to test.
Many carriers require you to have a data plan in order to send MMS messages. If you don’t have one, this guide may not help you.
Depending on your cellular plan, sending MMS messages may involve extra charges.
Preparation: Before You Get Started
Software
First, you need some tools to do the work. Download and install these three programs on your computer:
MagicBerry 3.5 (here)
A Hex editor (I like HxD, here)
BlackBerry Desktop (link)
Service Books
You will also need a copy of the service books attached to post #1 in this thread over at CrackBerry. Extract the contents of the .zip file to a location of your choice.
MMS Configuration Information
Once you have the tools and service books, you need to get the MMS configuration information from your cellular carrier.
Specifically, you need three settings: MMS Proxy, MMSC, and APN. Search on Google for something like, “MMS settings for [insert your cellular carrier’s name here]” and you should find them. Note that you also need the port number for the MMS Proxy. It should be there on the settings page.
Note: if the port number for your MMS Proxy is in the 9000s, this process probably won’t work, since your cell carrier may be using the older WAP 1.2 specification. If anyone runs across this, let me know, and I’ll try to help you out.
A Note on MagicBerry
MagicBerry is an .ipd file editor. Service books, like the ones responsible for MMS, are .ipd files. The logical conclusion would be that you could edit service books with MagicBerry. But MagicBerry only shows you certain pre-set fields within the .ipd file. As a result, you can't see or edit a lot of the information in the service book. Even worse, if you do edit a service book file with MagicBerry, that unseen information is not saved, so you end up deleting it and rendering the service book useless.
MagicBerry does have good uses, though: it splits and merges service book files perfectly. In fact, it is the best tool for splitting and merging service books, which is why you downloaded a copy.
Due to MagicBerry’s limitations, you’re going to edit the files with the hex editor.
Let’s get started!
The MMS How-to Guide
Step 1: Split the .ipd Files
Start MagicBerry, click File > Open, and open the tmo_servicebooks.ipd file.
Click Manipulate > Split.
Tick the box for the MMS Config 2.0 file.
Press “Split Selected,” enter a file name (and select a directory, so you know where the file is being saved), and press “Save.” Name the file “MMS_Config_20” so that you easily recognize it.
Note: there are "MMS Config" and "MMS Config 2.0" service books in the tmo_servicebooks.ipd file. Make sure you select the 2.0 version.
Step 2: Hex Edit the MMS Config 2.0 File
Now, start your hex editor and open the “MMS_Config_20.ipd” file. It will look like this, without the highlights and bolding. I’ve added those so that it will be easier to provide instructions on editing.
Hex Editing Basics
In the HEX editor, the blue numbers don’t matter to you (they’re just column and row labels). Only the black ones are part of the file.
The bytes (the two-character pairs) on the left side are all numbers, expressed in hexadecimal or “base-16”. The same information is expressed in ANSI characters on the right side.
The basics of hexadecimal numbering are that you count as follows:
Base-16 (hexadecimal): 1 2 3 4 5 6 7 8 9 A B C D E F 10
Base-10 (decimal): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
So in the two-character byte pair, 0D = 13, 1F = 31, 50 = 80, etc. If you can figure out those conversions, you’re good. If not, google hexadecimal numbering, and spend some time at a lesson. You need to understand how hex works to do this. There are also decimal to hexadecimal converters online. Use them to check your work, or to do the conversion work for you.
You can edit the file from either side of the hex editor. As you edit the information on one side, you’ll see it automatically changing on the other as well.
It’s easier to edit the information in the green, turquoise, and red fields on the right side.
The information in the grey, yellow, and pink fields must be edited from the left (hex) side, because it’s the hex value that matters, and it shows up as periods or jibberish on the right side. All those “dots” on the right side are not identical when you look over at the left side. They’re actually very different values. The nonsensical letters on the right side are likewise meaningful values on the left side.
It’s not a bad idea to just spend some time playing around in the hex editor before you move on. When you’re done, close the file without saving it, and the changes you make while experimenting won’t be made permanent.
Editing the File
The green blocks: enter your MMS proxy in each one, with the port number following the colon. Add to or delete bytes from the highlighted field if necessary, but whatever you do, do not write over or delete bytes outside the highlighted field! Those bytes contain necessary information, and if they are not there, the service book will not work. The same rule holds true for all of the other edits. You must stay within the highlighted fields. To delete bytes, just press delete. To insert bytes, position the cursor, and go to Edit > Insert Bytes on the menu bar, and choose the number of bytes to insert. If you’re using HxD hex editor, ctrl-z will undo a mistake. It also makes your changes in red, which makes them a little easier to follow. As with all programming, the work has to be perfect. There can be no mistakes. Check everything you do carefully.
The turquoise block: enter the MMSC address here.
The red block: enter your APN here.
The yellow blocks: total number of bytes in the highlighted green, turquoise, or red range that follows. Adjust it when you’ve finished editing. The number must be expressed in HEX of course. Use a decimal to hexadecimal converter online if you prefer that.
The pink blocks: the total number of bytes in the bolded range that follow (again, in hex). Adjust it when you’re finished editing the field.
The grey block: a count of the total number of bytes that follow it. In the original file, the value is 30 01 00 00, which breaks down as: 30(hex)=48 01(hex)=256. The total (48+256) is 304. If the number of bytes following the grey block was less than 256, there would be no 01 in the second place. For example, if there were 226 bytes following the block, the grey block would look like this: E2 00 00 00. When you are finished editing the entire file, go back and adjust the number in the grey block accordingly.
Once you’re done, save the file.
Step 3: Merge the MMS Config 2.0 and Wap Push Config Service Books
Open the “MMS_Config_20.ipd” file in MagicBerry
Once you’ve opened the file, click Manipulate > Merge.
Tick the box for the MMS Config 2.0 file.
On the right side of the “Merge” window, where it says, “Choose second IPD file,” press the button with the three dots.
Choose the tmo_servicebooks.ipd file.
Tick only the box for the “Wap Push Config” service book.
Press “Merge Selected,” enter a file name (and select the directory if necessary), and press “Save.”
Close MagicBerry
Step 4: Backup Your Phone
This is mandatory. You’ll need the backup file for step 6.
You need to have BlackBerry Desktop installed on your computer. If you haven’t done that yet, do it.
Connect your BlackBerry device to your computer with a USB cable. If BlackBerry Desktop does not start automatically, start it.
Do a backup. Just hit “Back up now” and follow the prompts. Do a full backup. Once you’re done, go to step 5.
Step 5: Merge the combined MMS Config 2.0/Wap Push Config service book file with your existing service books
Open MagicBerry
Press File > Open and at the bottom of the Open dialogue window beside the File name box, change “IPD Files (.ipd)” to “BBB Files (.bbb)”. Navigate to the folder where you stored your backup, and open it. It might take a while to open.
Click Manipulate > Merge.
Go down the list on the left hand side and tick the checkboxes for the service book entries (they will be way down). If there are service books listed for MMS Config or Wap Push Config, uncheck those boxes.
On the right side of the “Merge” window, where it says, “Choose second IPD file,” press the button with the three dots. Choose your merged MMS Config 2.0/Wap Push Config file.
Press “Merge Selected,” enter a file name (and select the directory if necessary), and press “Save.”
Optional: You can merge the newly created file again with any other service books you may need – such as the Anworm service books for the browser mentioned in my thread on CrackBerry. Just follow the process used in step 3.
Step 6: Install the Service Books to your phone:
Connect your BlackBerry to your computer with a USB cable if it isn’t still connected.
On your BlackBerry, go to Options > Device > Advanced System Settings > Service Book
Hold down the “Alt” key and press S B E B. You should see a message that says, “Legacy SB Restore Enabled.” Press Okay.
On your computer, open BlackBerry Desktop.
Go to Device > Restore.
Press “Change” and navigate to the folder with the merged .ipd file you created. Press “OK.” You should now see the file listed in the Restore window.
Click on the merged .ipd file you created to select it.
Under the heading “Select Data to Restore,” select “Select Device Data and Settings” and then tick the box for “Service Book.” This step is really important. Make sure it's done right. If you screw it up you could end up wiping a lot of settings and data.
Press “Restore” and answer “Yes” to the confirmation dialogue.
Close the BlackBerry Desktop software, disconnect your device, and do a battery pull to reboot.
Voila! If everything went well, you should have MMS capabilities. Test your ability to send and receive multimedia by sending yourself a picture message. You should receive the message within about 10 seconds.
If it doesn’t work, go back and make sure EVERYTHING in the file is done perfectly. If you find a problem, fix it, merge the files again, and reinstall the service books.
Solved!
Go to Solution.

Why not just ask carrier to enable MMS? I know T-Mobile can and will do it, even if there is no data plan at all on the line. We did it for my daughter and I know T-Mobile has done it for others. I assume other carriers do the same, but don't know....Which is why I ask.
- Ira

How to enable execute-disable bit and other hidden settings on Lenovo 3000 N200 model 0769!

2008-11-16: I have posted some more settings, scroll down to message 19 in this thread to read them.
Hi,
Here's some good news for anyone with a Lenovo 3000 N200 model 0769, who is disappointed and frustrated with the lack of options in the BIOS setup menu. (I had a moan about that in this thread.)
This is a long post but I hope you'll find it worthwhile. Here are the features/settings which I will explain how to enable:
The BIOS disables the execute-disable bit function of the CPU, with no way to turn it on. You can enable it.
You can set VGA and VESA graphics modes to not be stretched to fill the whole screen (sharper graphics with no distorted aspect ratio).
Speed up the POST display by skipping the memory test
Disable various features (if you don't use them, that might save some power): the HD audio controller, WLAN card, on-board LAN, shadowing of the video BIOS
Enable beep before booting the OS
Enable key click sound (only in DOS, not Windows or Linux)
I'm still working on this, and hope to figure out more hidden settings soon, e.g. to disable the DVD drive and trackpad, and to change the video output from NTSC to PAL.
The information below applies to the Lenovo 3000 N200 model 0769 with BIOS version 3.03. My N200 has Nvidia graphics. For some background on the general principles/research required to figure this out, please see this thread at Wimsbios.com.
To change the settings, you need to create a bootable DOS floppy disk or USB drive. Download SYMCMOS.EXE (Google for it) and put it on the bootable disk. Boot the disk and run SYMCMOS to back up your current CMOS settings: SYMCMOS -Lsettings.txt
Next load the settings.txt into a text editor. It will begin like this:
( SYMBOLIC CMOS EDITOR - Version 643710-035 )
CRC = 3EDD
(0000) [0001]
(0003) [0001]
Your CRC value may differ. Each line after the CRC contains a token number, followed by the value of that token. You can start with the settings.txt you created and edit any tokens you want to change, or delete all token lines and just include the tokens you want to change. Then use SYMCMOS.EXE to apply the new file: SYMCMOS -V2 -Uupdate.txt
After running that command you can reset, and hopefully notice the new settings in action. (For certain settings, such as re-enabling the execute-disable bit, you need to turn the computer off then on again.)
Here are some specific tokens you can change:
Token Default New Description
(0000) [0001] [0000] Disable the HD audio controller
(0042) [0001] [0000] Disable LCD panel graphics scaling/stretching
(004B) [0000] [0001] Beep before booting the OS
(0267) [0001] [0000] Enable support for the CPU execute-disable bit
(028E) [0000] [0001] Enable key click (only works in DOS and BIOS setup)
(02A3) [0001] Set to 0 for slower memory test, or 2 (or 3?) to skip
test for faster booting, especially with 4GB RAM
(046E) [0001] [0000] Disable video BIOS shadowing. (Best to leave enabled.)
(0471) [0000] [0001] Enable 1MB memory hole at 15MB. (Best leave disabled.)
(0486) [0001] [0000] Disable PCI Express ports 1-6. This takes precedence
over the individual port bits below, and disables the
LAN, WLAN and (probably) ExpressCard port.
(0489) [0001] [0000] Disable PCI Express port 2 (WLAN card)
(048C) [0001] [0000] Disable PCI Express port 3 (maybe ExpressCard?)
(048F) [0001] [0000] Disable PCI Express port 4 (LAN)
For example, if you want to disable LCD panel scaling and enable the execute-disable bit, you would create a text file like this:
CRC = 3EDD
(0042) [0000]
(0267) [0001]
Some final points:
Loading the default settings in the BIOS setup menu will overwrite any changes you make using SYMCMOS.EXE. So keep that bootable disk around in case you need to re-apply your settings in future.
The token numbers above are specific to version 3.03 of the Lenovo 3000 N200 model 0769 BIOS. They might be different for earlier BIOS versions, and will be different for other models of computer.
Once you have created a bootable floppy disk with a text file containing your updated settings, you could create a bootable CD with the floppy's data on. Just boot that CD to restore your settings in future.
Before experimenting with randomly changing token values to discover other hidden settings, make sure you know how to reset your computer's CMOS memory! Changing some settings results in your computer becoming unable to boot, so you can't use the BIOS setup screen to reset. I wrote about how to reset the N200 model 0769 CMOS in this thread.
If you discover any other settings, please let me know.
Any changes made are at your own risk; if you "brick" your laptop don't blame me!
Message Edited by Donuts on 10-15-2008 09:45 AM
Message Edited by Donuts on 11-16-2008 11:35 PM

Hi Donuts !
My computer is a 3000 N200 0769BAG. It has a Dual Core Pentium and the information I get about the BIOS using lshw are :
========================================================================================
description: BIOS
          vendor: LENOVO
          physical id: 0
          version: 68ET35WW (04/16/2008)
          size: 106KiB
          capacity: 960KiB
          capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot biosbootspecification
====================================================================================
I've nothing telling me it is a 3.03 BIOS version but only got the BIOS file name (68ET35WW);
Is it the same BIOS you used and if not how could I find the list of (token, default value,new seting) for that particular BIOS ?
Thanks a lot in advance for your help !
Regards

How to enable user sets from tools in sales order

Hi,
How to enable user sets from tools in sales order..it is greyed out..
and is there anyway we can do to add shipsets from other place?
Thanks

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

Mneumonics in Swing? How to enable them?

Similar Messages

Maybe you are looking for