PC Sync could not update the data to the mobile ph...
Ok now I am a little annoyed with my Nokia 6680.
For the last four months it has been working fine but all of a sudden it has stopped synching with either of my PC's.
The phone connects ok and I can do file transfers etc however when I try to sync it fails with the message
"The Synchronisation has been Terminated!"
and
"PC Sync could not update the data to the mobile phone."
I updated PC Sync to latest version on both PC's and I have tried cable and bluetooth connections but get the same issue.
In the end I bit the bullet and re-initialised the phone and it began working again.... for three days and then its doing the same thing again. It still connects ok but no sync.
My Laptop is using WinXP SP2 and my home PC is on WinXP SP1.
Anyone able to help with this please, my phone is effectively now a paper weight and I will go back to Pocket PC phones again.
Thanks for the tip I had the SAME problem on the 6822 same error. The phone had been fine for a month or so. Then nothing would synch, thought it was the PC fixed / reinstalled the software changes options nothing would work same error.
Read your note, powered down the phone and Bingo all synched fine!
Thanks very much. I'm using a Nokia 6822
Similar Messages
-
Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
CheersHi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support -
I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties. -
ITunes could not update the carrier settings on your iPhone
When I try to download and install the new carrier settings file, I get the message "iTunes could not update the carrier settings on your iPhone. You do not have enough access privileges for this operation." (I got a similar message when I tried to download and install the OS update.)
I've been able to work around the problem by creating a different user and installing from there. But I'd like to be able to find and correct the cause of the error message instead of using a workaround. It seems like there's a file or folder somewhere that has somehow become read-only. Does anyone know where iTunes downloads the carrier settings and OS update files?Jim VanLeeuwen wrote:
You will find them in separate folders within your user account Library/iTunes folder.
That was it. Somehow the owner of ~/Library/iTunes got changed to root.
Jim VanLeeuwen wrote:
Have you tried using Disk Utility to Repair Permissions?
Right after I posted the message I thought that the age-old placebo of repairing permissions might actually fix my problem. Because of your quick reply I found the ownership problem before repairing permissions. So here was the perfect chance for a test. Repair Permissions ran successfully but the owner of ~/Library/iTunes was still root. Repair Permissions fails the test.
I manually changed the owner to steve and was able to download and install the carrier settings.
Thanks! -
I could not update the new version of itunes 11.1.4.
It told me to uninstall the old version, but I cannot install the new version.
Any help?/ solutions?
Thank youHello jasopz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best of luck,
Mario -
Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?
Resolve iOS update and restore errors
-
Windows Could Not Update the Computer's Boot Configuration. Windows Server 2012
I am trying to install Windows Server 2012. When installing, I get the message Windows Could Not Update the Computer's Boot Configuration. Installation
cannot proceed. It cancel the installation. Can anyone help me with my problem?Hi,
Any update about the issue?
Please post more detail information about the issue?
How did your do the installation? clean install or override install?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Windows could not update the computer's boot configuration. via UEFI installation
I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r
Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support -
HELP!!!
Windows could not update the computer's boot configuration. Installation cannot proceed.
The installation then it says "The installation was canceled" and "Any changes to your computer won't be saved.
I have been trying to sort this out for over 15 hours.
I have the MacBook Pro (Late 2011)
Quad Core i7 (Clocked at 2.2GHz)
4GB Ram
Radeon Graphics (512mb graphics ram)
Running OSX Yosemite (10.10.2)Did you have to modify Bootcamp Inof.plist to see the USB Installer option?
Your USB device needs to be a USB2 device. Here is an example. -
Error ''windows could not update the computer's boot configuration"
i have an Hp pavilion dv 6 -3045 product wr747ea#abe ,till now i installed windows 7 on it several times but this time after i formated the partition and started the instalation from usb at completing the installation a message popup ''windows could
not update the computer's boot configuration''.Also i tried with another copy of windows 7 also booted from usb but i get same message at same step. I used a memory stick and bootable windows 7 from usb with Rufus program.
Please any sugestions ?Hi,
Please make sure you have format the system drive and perform a clean install, not just override or upgrade from the previous system.
The bootloaders for Windows Vista and Windows 7 are quite similar, you could have a look at this article and see if it's helpful to you:
When I try to upgrade an earlier version of Windows to Windows Vista, I receive an error message: "Windows could not update the computer's boot configuration"
http://support2.microsoft.com/kb/931697
Karen Hu
TechNet Community Support -
Windows could not update the computer's boot configuration Server 2012
I'm trying to install Windows Server 2012 on another partition (V:) that I create directly from Disk Management. After I create it, I do a simple format of the partition.
Next, I try to Install Windows Server 2012, directly on the recent partition, after the setup is completed, Windows Server 2012 boots to the Getting the devices
ready section, but stops and throws me this error.
Windows could not update the computer's boot configuration
After that the computer, restarts and it goes on and on unable to create a multi-boot environment. What's killing me is that I have done this on the past like 10 times and never run to this problem.
I'm running Windows 7 Home Premium on an ASUS K45 64 bit.Hi,
You can try adding a new boot entry by using bcdedit tool:
Adding Boot Entries
http://msdn.microsoft.com/en-in/library/windows/hardware/ff541231(v=vs.85).aspx
Or you can build a usb-bootable deivce to install the image:
Walkthrough: Create a Bootable Windows PE RAM Disk on a USB Flash Disk
http://technet.microsoft.com/en-us/library/dd744530(v=ws.10).aspx
Hope this helps. -
I started getting these errors on one of my lists that has several workflows running on it. The strange thing is it has been running pretty much error free for 1.5 years and we have not made any changes to the workflows and no updates have been applied prior
to the errors staring.
It is typically always the same workflow but it doesn't always happen, only some of the newly added list items will error. If I simply cancel the current instance and manually start it again it runs fine to completion and it only seems to error out
at the start.
Most of the other workflows pause/wait for a status change but I will be reviewing all the workflows to confirm there is no locking conflict. I have added a Wait to one other workflow that I know will update the list item on startup, it is populating
the Title column but even after that I am still getting the error.
I noticed in the TraceLogs, 2 errors that started on Feb 2 and I could not find them in any previous logs (went back many days with no occurrences).
02/02/2015 07:15:55.93 w3wp.exe (0x1C50) 0x18D4 SharePoint Foundation
Workflow Infrastructure 88xr Unexpected WinWF Internal Error, terminating workflow Id# 6cbf1da4-fbf9-4dfe-ae48-b6d765cc6d03
02/02/2015 07:15:56.37 w3wp.exe (0x1C50) 0x2140 SharePoint Foundation
SPRequest 8l3a Medium Failed to cache field with id "{49af83c9-c5e3-47db-b055-bf18673bba67}", overwrite=0
The "Field ID"{49af83c9...} listed is a Lookup column to a Clients list on the same site.
Any suggestions on what could be causing the sudden errors. I will be reviewing all other workflows but as I mentioned previously, this system has been working great up until Feb 2 with no changes to the lists or workflows for 3-6+ months.
Thanks in advance.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties. -
MSVCR80.dll error/windows 7/ lost Itunes. Tried to uninstall applications- Itunes, apple software update, sucessfully but Apple mobile device support would not uninstall so I could not continue uninstalling the rest.
Anyone have any ideas??Hey dhmacgowan,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh -
this is really frustrating ive been googling for hours trying to find the solution! any help would be greatly appreciated. I have windows 7 and the newest gen ipod nano
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Could not update the kernel parameter when oracle 10g Installation.
Hi,
I tried to update ip_local_port_range in sysctl.conf file.
vi /etc/sysctl.conf
net.ipv4.ip_local_port_range=1024 65000
After changing the value i executed following command,
sysctl -p
Error : Unknown error 22 setting key 'net.ipv4.ip_local_port_range'
Please helpYou didn't specify if you are on a linux based OS, it looks like you are, but it would be so kind on your side if you clearly specify the OS version and which DB version you are planning to install.
When I perform installations of DB10gR2 on OEL4/OEL5 or RHEL4/RHEL5 i issue this commands:
echo net.ipv4.ip_local_port_range = 1024 65000 >> /etc/sysctl.conf
Once the kernel parameter have been set, the kernel must be re-read with the /sbin/sysctl -p command.
~ Madrid
http://hrivera99.blogspot.com
Maybe you are looking for
-
Sharepoint 2013 onedrive for business Ipad App
Hi We have an on-premise sharepoint 2013 installation and we would like to achieve access to the private library/onedrive using some of our ipads. We have installed One drive for business connected to a VPN. We have put in the url of the site, whic
-
How can I set up a default page in CS5-CC?
How can I set up a default page in CS5-CC?
-
my phone is locked and is asking for a 4digit code. I have not idea what that would be. I have entered every thing I can thing of and nothing works. Please help.
-
IDCS4. Flash version when exporting to .swf?
G'day, Gotta say I'm loving CS4, it creates faster and more efficent workflows and that time saving makes me more money. That aside, when exporting a document with hyperlinks, buttons etc. for a website, what version of Flash Player does the end user
-
Hello i have installed jdk1.4.2 in my win2000 machine. i have installed jwsdp also in my machine now when i try to import javax.xml.soap.* in my program the following error comes "package javax.xml.soap does not exist" i could understand from this th