My 160 classic wil not update the firmware 1.0.1 ?

hi al my 160 classic wil not update the firmware 1.0.1 what do do rong also after sync not al my covers ar on my ipod

Hi hrcpinfreak,
What exactly happens when you try updating your iPod's firmware? If you're getting an error message while syncing your iPod, then please quote what that precisely says.
You could try these five iPod steps, as a start:
The Five Rs
But we won't really be able to give you specific instructions unless we know some more details, so please let me know what's going on!
-Kylene

Similar Messages

TS3694 I was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is

was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is useful

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

Can not update iphone firmware using iTunes "The network connection timed out"

Hello,
I can not update the iphone firmware using iTunes.
Messagte displayed
"There was a problem downloading the software fo the iPhone. The network connection timed out.
Also seen stopped error -3259
I have run network connectivity tests from iTunes and All Tests passed.
Can anyone help?
Thank you,
Joan

Did you make sure it was the exact file for your device and the latest version? I just downloaded the latest file for my iPhone4, put it in the folder I mentioned above and it ran the install versus downloading the file. This problem where it times out after downloading is a big Bug within iTunes that has been there ever since IOS 7.0 was released. I wished these apple developers would just fix iTunes. There are a ton of complaints about this issue. I sure miss Steve Jobs running this business, I really feel like it's gone down hill after he left.
I hope this helps!
Regards.

After updating the firmware on IOS7 I can not activate my iphone 4.

After updating the firmware on IOS7 I can not activate my iphone 4. Itunes says "Unlock the iPhone on this ***** @ *******. ru impossible"

ITunes says:
At the moment the iPhone is tied to the Apple ID (i ***** @ y *****. Ru). Sign in with Apple ID, which is used to configure this iPhone.
Unlock iPhone on this I ***** @ ya *****. Ru impossible.

HT2434 does anybody know what happens if I dont update the firmware of my macbook pro (does not have a guid partition scheme))

does anybody know what happens if I dont update the firmware of my macbook pro (does not have a guid partition scheme)?

Apple will hire a high school girls clique to follow you around, make fun of you & post disparaging comments on Facebook .

Error while updating the firmware

I have X4500 running solaris 10 OS with software version 5.10. The ILOM version is 1.1.1. I tried to update the firmware but I cannot do that because I am getting an error. This is how I setup everything and I get the error mentioned below.
C H A P T E R 1 - Flash Upgrading Your Server to Software Release 1.2
I referred to the above link to do so. But, I do not understand what is the tftpserver that I need to mention here. I get an error message saying gethostbyname() failed. I also setup tftp server on my solaris machine using the following link.
A P P E N D I X C - Updating the Firmware
Please, help me.

ILOM <1.1.8 was pretty flaky. 1.0 was described to me by a Sun CSE as the worst piece of software they ever released. I beg to differ, having been forced to use YP and rpc.lockd in the past but I digress ...
o) Are you sure that you're getting the right firmware image? You want the x4500-specific images here: http://www.sun.com/servers/x64/x4500/downloads.jsp Be careful not to mix up x4100/x4200, x4100m2/x4200m2, x4600, x4500, etc. files as they are different
o) Do a "show /SYS/MB" before updating your firmware and stash the output. Updates from 1.x versions of ILOM have a way of wiping the system serial and part numbers. If you record that info first you can repair after the fact.
o) Do a "reset /SP" to reset the service processor before attempting the update. 1.x versions of ILOM, especially <=1.1.1, seem to upgrade more reliably when they're freshly booted
o) Be sure that /SYS is stopped before you update ILOM
o) You don't specify what command you're using to try to update, but I suspect that you're trying something like
load -source tftp://some.host.domain/file.ima
given the gethostbyname error. Give it the ip address of the tftp server not the FQDN.

IMac G3 won't boot after updating the firmware and upgrading the OS!

Hi! Everyone,
I have an iMac G3 333MHz (five flavors) which comes with 192MB of RAM and 6GB of hard drive. Originally, it was OS 8.5.1 installed, later upgraded to OS 9.2.2. Of course, the firmware has been updated by the appropriate method provided by the on-screen instructions before the installation of 9.2.2. After successfully updating the firmware and installing Mac OS 9.2.2, the system booted up and worked fine. However, after shutting it down and powering it up a few days later, I have encountered a critical problem:
1. At first, the iMac would chime and displayed a smiley-mac finder face.
2. No question mark appeared and the system halted because it stayed at the same screen for about 5 minutes! Also, the keyboard wouldn't respond. For instance, the LED signal light wouldn't light on when Caps Lock was pressed.
3. I assumed that this is just a typical crash and rebooted the machine via the "reset" button on the right side of the machine.
4. After restarting, well, no luck, the same condition. Therefore, I rebooted it again by using the method mentioned above.
5. The condition of sticking at the smiley-mac finder face occurred again! However, this time the iMac wouldn't chime and just displayed the mac face.
6. Another restart, well, it was getting worse... no chime and no smiley-mac finder face but a white screen.
7. I was frustrated then and shut the machine down forcefully by rebooting it again and pressing on the power bottom quickly before the screen appears. Also, I unplugged the power cord.
---------- After a few hours later ----------
8. Okay, I then plugged the power cord in and booted it up again, this time, it would chime but stuck at the white screen. => No smiley-mac finder face appeared!
9. Rebooted it again, the result was as same as step 8.
10. Another restart, the smiley-mac face finally appeared but still... stuck here and this time, no chime.
11. I then shut the machine forcefully by using the method mentioned above and let the machine rest for about a day with the power cord unplugged.
---------- After resting for a day ----------
12. I booted it up and it would chime, but no screen (the power button was orange, not green). I then forcefully shut down the machine.
13. Waited for about a minute and powered it up. This time, I tried to clear the PRAM, but no chime and gave me a white screen. => No luck! As mentioned, the keyboard's LED signal light wouldn't light on even though the Caps Lock key has been pressed.
*Note: The keyboard has been tested on the other computers and it worked. Also, I tried different USB ports to plug the keyboard in. => The USB ports were all in working condition， as I can know from the last successful start up.
14. Forcefully shut the machine down and tried to enter the Open firmware, no luck. It didn't enter and gave my a white screen.
15. Conclusion:
1) After resting for a while, the iMac would chime.
2) Rebooting too much times would cause the machine not to chime and leaded the screen to become white instead of the smiley-mac finder face.
3) However, rebooted the machine when the screen became white, the smiley-mac finder face would appear again without chime.
By the way, I could hear the hard disk spinning up so that means the hard disk is working.
Can anyone help me solve this problem? Is it related to the firmware update? Any suggestions will be appreciated! Thanks!
Andy

OK, I will try replacing the PRAM battery. Also, the PowerMac G3 and the other iMac 233MHz had the dead batteries. They are still working though... Should I replace them along with the iMac 333MHz? In case of not replacing, will they malfunction in future times? There are some symptoms on this two machines: 1. iMac 233MHz - No chime and no sound when adjusting system volume (the bi sound is not available), but iTunes and other applications can still use the audio device and output the sound via internal speakers; 2. PowerMac G3 450MHz - Will chime but sometimes hard to boot: 1) Chime but no screen; 2) No respond after pressing the power button => the power signal light won't light on. Every time I experienced this, I would open its case, pressing a small button (not quite understand what it does... anyway, just works if system halted.) near the PRAM battery and wait for about a minute, then close the case, and it boots. However, I have to reset "Date & Time"...

Hi anyone. Can I buy an SD card reader for my old Powerbook G4, OSX, 10.4.11 and it's only USB. I've never needed one previously but I now need to update the firmware on my camera. Can I get one, if so which one's best? Many thanks.

Hi anyone.
Can I buy an SD card reader for my old Powerbook G4, OSX, 10.4.11 and it's only USB.
I've never needed one previously but I now need to update the firmware on my camera.
Can I get one, if so which one's best? Many thanks.

Hello,
If it is a PowerBook G4 with a PC Card slot, you have two possibilities. You could buy a USB card reader for SD, or a PC Card adapter (such as SanDisk's 6-in-1adapter). Please note that you are or may be limited to plain SD (that is, not SDHC) unless otherwise noted. For a USB reader, make sure that it has Mac support. BTW, is an SD card absolutely necessary for the firmware update; is there not a way of updating via cable? If you post back with the camera model, someone may be able to provide additional information.
Jan

I have a late 2011 macbook pro and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated

I have a late 2011 macbook pro running OSX Lion, and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated. Im wondering what can i do to stop this or get it to update.

Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

I can not update, the latest E71 software

Hello to all
I bought a few days E71, which is software you 300.21.012. As we have already seen a newer version appeared. When using Ovi software update shows that this is the last version. Eventually it last? or?
Thanks

labi wrote:
how to know if my phone is locked to a network or no,
does it mean if i can (or not?) insert sim card which content different network?
If your phone is locked to a network, you will only be able to use a sim card from that network - other sim cards will not work.
But this is not necessarily the reason why you cannot update the firmware.
When your phone checks whether an update is available it sends it internal product code to the server. It is this product code that determines what firmware is available to your handset.
Many carriers have handsets specifically tweaked for their networks. These handsets have product codes that are specific to that network and have specific tweaked firmware that goes along with it. When Nokia release a firmware update it is for GENERIC Nokia phones that don't have carrier-specific firmware. It is up to the carriers to have their specific firmwares updated to the latest version. With some carriers this takes a long time.
So if your phone is not a generic Nokia handset, but has a carrier-specific product code with carrier-specific firmware, then you won't be able to install updated firmware until your carrier decides to release updated firmware, even if Nokia has released the generic version and even if your handset has be UNLOCKED from the carrier.
When a phone with carrier-specific firmware is unlocked from a network, it is simply allowed to operated on other carrier's networks. It still has carrier-specific firmware and a carrier-specific product code.
If the carrier is slow in updating firmware, then what you need to do is not only unlock the phone, but DEBRAND it by changing its product code to the generic Nokia code for that handset and area. That way it will update with generic firmware and not carrier specific firmware. Debranding voids you warranty, so it's not an option for some.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Updating the firmware of a DVR-112D

I have been searching the discussions here and in other places trying to find a way to update the firmware that my DVR-112D uses...eventhough I am running Lion.
The actual Firmware that my original drive has is BC-14 / MMC-3 and I have read that there are ways to update the drive....but I wonder if anyone here can help me to solve this issue...
thanks

Hello mooblie....thanks for your kind answer but the fact of the matter is that doing it using a pc is a no go for me. I don't have one, and even more, doing the procedure in a pc requires first to get the driver out of the mac and then with the internal drive (which is without an external enclosure) somehow open, trying to connect it to the pc....it is both risky and it's a lot of work.
Wile searching for answers that could be implemented for the Mac, well, I even found the recipe as to hows athis can be achieved via Terminal. So as you can see, que purpose of posting this topic here has been hoping that maybe within mac there was another way of accomplishing the task without soo much strugle.
Cheers

Updating the firmware on my 9500

does anyone know how to update the firmware on the 9500 commincators? i do know that nokia uk does it over the air, but not with this unit. the version i have currently is 4.44. as i am in the US, is there another, newer version that is available to download or be sent to my phone without sending my phone oversees? and if it is, will it bring it to the current version of 5.22 that is on my US version 9500?
thanks for your help.
-chris

http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=3243
N95 v 21.0.016 14-02-08 RM-159 (03.01).
N93 v 20.0.058. 21-10-06 RM-55 D211 card-phone
-Android Hero :-)

Update the firmware on my airport express from 7.4.2 to 7.5.2

When I press update the firmware on my airport express from 7.4.2 to 7.5.2 using the airport tool says:
This device and its network service is temporarily unavailable. will you continue?
When I press deliberately and pressed into the code goes started to download the update, but come quickly with this message:
Airport Utility could not find the AirPort wireless device after restarting. You may need to select your network manage network connections and try again.
But my airport lights up green as if it works and I may well be on the net and listen wireless music.
How do I get updated firmware?

Chances are, the update was downloaded and installed successfully.
Try powering down your entire network....every device.....order is not important
Wait a few minutes
Start the modem first and let it run for 2-3 minutes by itself
Start the next device connected to the modem the same way
Continue starting devices one at a time about a minute apart until everything is powered back up
What happens?

Update the firmware for RTX 4088

I got my phone today and tried to update the latest firmware. I had some calls succesfully already and there is no problem with calling, but I still cannot update the firmware and it showed me that "No connection to update server". Is there any setthing which I would need to activate before doing this? version is 0138
Is there anyone who had this experience and would share?
Thanks,

I'm having exactly the same problem, though my firmware is 0141 (not sure if this is the latest). When I select the 'Firmware update' option, I'm immediately given that "No connection to update server" message (not sure if it even tries to connect to it, as this all happens immediately), and no further options (Latest Firmware / Current Firmware / All Firmware vers.") are presented. I tried to reset the base station several times, to no avail.

While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen

While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen and when i press the power button i hear the noise that it would make if it was going to start up. But i only see black.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My 160 classic wil not update the firmware 1.0.1 ?

Similar Messages

Maybe you are looking for