Mode encoding default

Hi.
I am using the next code to move a file into a internal table.
Apertura de fichero para lectura
  OPEN DATASET f_entrada FOR INPUT IN TEXT MODE ENCODING DEFAULT.
  IF sy-subrc = 0.
    DO.
Lectura del fichero
      READ DATASET f_entrada INTO linea_datos-linea.
      IF sy-subrc = 0.
        APPEND linea_datos.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
  ENDIF.
Cierro el fichero
  CLOSE DATASET f_entrada.
The file contains special characters  as : Bº   or Irún .
Any mode to open the file that accept this characters, with the preview code produce a error:
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'ZPRFUNSD05' had to be terminated as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 1. If this number is 0, the second error case, as
mentioned above, has occurred.
Thanks.

Hi,
Please change the statement as follows:-
OPEN DATASET f_entrada FOR INPUT IN TEXT MODE ENCODING DEFAULT <b>IGNORING CONVERSION ERRORS</b>.
Best regards,
Prashant

Similar Messages

  • Open dataset filename for output in text mode encoding default

    Hi,
    When I excute this command I get a sy-subrc = 0, but no file is created. This happens in an ECC 6.0 system. In 4.6C works ok.
    filename has the following structure '
    server\directory\filename'
    What am I doing wrong??
    Thank you very much for your your help.
    Regards.

    Hi,
    Can u tell what syntax u have written for open statement.
    In programs with active Unicode check, you must specify the access type (such as ... FOR INPUT, ... FOR OUTPUT, and so on) and the mode (such as ... IN TEXT MODE, ... IN BINARY MODE, and so on). If the file is opened using ... IN TEXT MODE, you must still use the addition ... ENCODING. If the Unicode check is enabled, it is possible to use file names containing blanks.
    Regards,
    Sruthi

  • Not able to open Dataset when adding Encoding Default

    Hi Experts,
    I have an urgent requirement . I wanted to make one programs Unicode Complaint
    I had to change the statement
      open dataset gv_string in text mode  for output.
    to
      open dataset gv_string in text mode encoding default for output.
    But after this change the sy-subrc is becoming 8 and not able to open the .Can any one please help
    Thanks
    Arshad

    HI,
    Maybe there is no authorization for you to write the file onto the app.server.
    Check with basis about your authorizations.
    Or could be the directory does not exist.
    Regards,
    Subramanian
    Edited by: Subramanian PL on Jun 27, 2008 1:24 AM

  • OPEN DATASET file FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE

    Hi There,
    I also have the similar issue. I am able to write the data into appliaction server in Chinese Characters using :OPEN DATASET datei FOR OUTPUT IN TEXT MODE ENCODING DEFAULT or OPEN DATASET datei FOR OUTPUT IN TEXT MODE ENCODING UTF-8. But when i save that file into my presentation server manually, all the chinese characters are showing as Junk.
    When i use OPEN DATASET datei FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE, giving runtime error and when i use OPEN DATASET datei FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE IGNORING CONVERSION ERRORS, No error but application server output itself showing as Junk characters.
    Could you please suggest me what you have done?
    Regards,
    Chaitanya A

    Hi,
       Use this
      OPEN DATASET File_path  FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE
      WITH SMART LINEFEED
    it will definitely work.
    Regards,
    Manesh. R

  • Difference between IN LEGACY TEXT MODE & TEXT MODE ENCODING NON-UNICODE

    Hi,
    We're upgrading to ECC5 and the 'open dataset' command needs amending if the program is flagged for Unicode (which usually occurrs in user/fm exits). Therefore is ECC5 this command is no longer valid:
    "open dataset DSN in text mode"
    We currently interface with systems that may not have unicode enabled. Yet we have not enabled unicode in our own system just yet.
    So we think these two commands are the most approriate for replacing the 'old' open dataset command:
    "open dataset DSN for input in TEXT MODE encoding NON-UNICODE"
    "open dataset DSN in LEGACY TEXT MODE for input"
    However we're not really sure what the difference between these two commands is?
    Has anyone worked with these commands?
    Could you offer some help as to their differences and when each should be used?
    Many thanks!

    Hi Robert,
       Here is an excerpt from sap documentation.
    ... TEXT MODE ENCODING {DEFAULT|UTF-8|NON-UNICODE}
    Effect:
    The addition IN TEXT MODE opens the file as a text file. The addition ENCODING defines how the characters are represented in the text file. When writing in a text file, the content of a data object is converted to the representation entered after ENCODING, and transferred to the file. If the data type is character-type and flat, trailing blanks are cut off. In the data type string, trailing blanks are not cut off. The end-of-line marking of the relevant platform is applied to the transferred data by default. When reading from a text file, the content of the file is read until the next end-of-line marking, converted from the format specified after ENCODING into the current character format, and transferred to a data object.
    The end-of-line marking depends on the operating system of the application server. In the MS Windows operating systems, the markings "CRLF" and " LF" are possible, while under Unix, only "LF" is used. If, when using Windows, an existing file is opened without the TYPE addition (see os_addition), the first end-of-line marking is found and used for the whole file. If a new file is created without the TYPE addition, the content of the profile parameter abap/NTfmode is used. If the profile parameter is not set, "CRLF" is used. If a file with the TYPE addition is opened and a valid value is contained in attr, this value is used.
    In Unicode programs, only the content of character-type data objects can be transferred to text files and read from text files. The addition ENCODING must be specified in Unicode programs, and can only be omitted in non-Unicode programs.
    The additions after ENCODING determine in which character representation the content of the file is handled.
    DEFAULT
    In a Unicode system, the designation DEFAULT corresponds to the designation UTF-8, and the designation NON-UNICODE in a non-Unicode system.
    UTF-8
    The characters in the file are handled according to the Unicode character representation UTF-8.
    NON-UNICODE
    In a non-Unicode system, the data is read or written without being converted. In a Unicode system,the characters in the file are handled according to the non-Unicode-codepage that would be assigned to the current text environment according to the database table TCP0C, at the time of reading or writing in a non-Unicode system.
    If the addition ENCODING is not specified in non-Unicode programs, the addition NON-UNICODE is used implicitly.
    ... LEGACY TEXT MODE [{BIG|LITTLE} ENDIAN] [CODE PAGE cp]
    Effect:
    Opening a Legacyfile. The addition IN LEGACY TEXT MODE opens the file as a legacy text file. As with legacy binary files, the byte order and the codepage with which the content of the file should be handled can also be specified. The syntax and meaning of {BIG|LITTLE} ENDIAN and CODE PAGE cp are the same as for legacy binary files.
    In contrast to legacy binary files, the trailing blanks in a legacy file are cut off when writing character-type flat data objects in a legacy text file. As for a text file, an end-of-line marking is also applied to the transferred data. In contrast to text files opened with the addition INTEXT MODE, Unicode programs do not check whether the data objects used for reading or writing are character-type. Furthermore, the LENGTH additions of the statements READ DATASET and TRANSFER are used for counting in bytes in legacy text files and in the units of a character represented in the memory for text files.
    Note:
    As with legacy binary files, text files that have been written in a non-Unicode system can be accessed in Unicode systems as legacy text files, and the content is converted accordingly.
    Example
    A file test.dat is created as a text file, filled with data, changed, and exported. As every TRANSFER statement applies end-of-line marking to written content, after the change, the content of the file has two lines. The first line contains "12ABCD". The second line contains "890". The character "7" has been overwritten by the end-of-line marking of the first line.
    DATA: file   TYPE string VALUE `test.dat`,
          result TYPE string.
    OPEN DATASET file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    TRANSFER `1234567890` TO file.
    CLOSE DATASET file.
    OPEN DATASET file FOR UPDATE IN TEXT MODE ENCODING DEFAULT
                                 AT POSITION 2.
    TRANSFER `ABCD` TO file.
    CLOSE DATASET file.
    OPEN DATASET file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    WHILE sy-subrc = 0.
      READ DATASET file INTO result.
      WRITE / result.
    ENDWHILE.
    CLOSE DATASET file.
    Regards,
    Ravi

  • How to set change mode as default for workbench objects

    Hi experts
    I've always wondered if there is a configuration option in NW BW 7 where it can be set whether double clicking a workbench object will show the maintenance screen for that object in change or display mode (default is display). Because is annoying to have to set edit mode every time one double click a workbench object in the development system, and as it is a development system, it would make sense to have edit mode by default instead of display
    I was thinking that it may be related to the client role, but who knows...
    I appreciate your help
    regards

    Not sure where this can be set...if anywhere.
    But how about this for a workaround: Right click the object in RSA1 and the select Change instead of Display.
    That would save you a click if I counted correctly

  • Tree view in collapsed mode by default

    Hello Experts,
    Could you please explain how to get a tree view collapsed by default?
    My scenario:
    When looking for a Marketing Segment, the system displays the result with a tree view in expanded mode, containing all the Profile Sets with their profiles and Target Groups.
    I would like to have the tree view in collapsed mode by default with only the Profile Sets displayed. Then, if need I would expand a given Profile Set to display its Profiles and Target Groups.
    Component: SEGAS_SEG
    View: RTSEG
    Thank you very much for your answer.
    Best Regards.
    Edited by: KenshiroHokuto on Apr 26, 2010 5:15 PM
    Edited by: KenshiroHokuto on Apr 26, 2010 5:16 PM

    Hi,
         Have a look at the context node SEG in the view RTSEG. You will see a method REFRESH. The following lines are responsible for the automatic expansion.
            IF search_roundtrip = abap_true AND lv_index < 20.
              lr_root->expand_node( ).
            ENDIF.
      Going by what you say, you will want to comment out these lines. If your component/view is not enhanced, enhance it and redefine this method. Copy the standard code and alter it. You need to alter this code to suit your requirement. For enhancing the component/view, you can find wikis in the CRM WebClient UI section.
    Regards,
    Arun Prakash

  • Out-file -encoding default

    When utsing out-file to send output to a text file, in order not the get the BOM (Byte Order Marker) I have to use the form
    out-file -Encoding default .   Why is the default not the default?

    The default for Out-File is Unicode.
    EDIT: See here for more details:
    http://technet.microsoft.com/en-us/library/hh849882.aspx
    Don't retire TechNet! -
    (Don't give up yet - 12,830+ strong and growing)

  • PowerShell runnig in Admin Mode by default

    How should I remove Windows Powershell from running in Admin Mode by default?

    Run this script in the PowerShell session and see if it reports elevated admin privileges:
    $id=[System.Security.Principal.WindowsIdentity]::GetCurrent()
    $wp=new-object System.Security.Principal.WindowsPrincipal($id)
    $admin=[System.Security.Principal.WindowsBuiltInRole]::Administrator
    $IsAdmin=$wp.IsInRole($admin)
    if ($IsAdmin) {
        Write-Host "Running in Admin mode"
    Ravikanth
    http://www.ravichaganti.com/blog
    Twitter: @ravikanth
    PowerShell 2.0 remoting - eBook

  • JHS 10.1.3.1.26 - Using create mode as Default page

    Hi ,
    I want to use create mode as default (while entering some page , user can insert new data immediately), any suggestions ?
    At present , I use javascript to call create button while page has been load.
    I think there must be some better way to do this.
    Thanks
    Eron Yang.

    Eron,
    See this thread for a solution:
    Re: Run page at create mode
    Steven Davelaar,
    JHeadstart Team.

  • Disabling touch mode by default for Reader XI

    I am looking to turn off touch mode by default for Reader XI.  I tried the customization wizard and there is no settings for touch mode.  The registry keys for the settings are in the local user area so I don't think I can apply those for everyone.
    Has anyone else looked into this or know a solution?

    You can set how Acrobat enters Touch mode, if at all, for touch enabled-devices.
    Choose Edit > Preferences (Windows) or Acrobat/Adobe Reader > Preferences (Mac OS).
    Under Categories, select General.
    In Basic Tools, choose the desired default setting from the Touch Mode menu.

  • Disable read mode by default during installation

    I am currently trying to disable read mode by default as a part of the software installation.
    I have searched the msi file using the customization wizard but have not found any part of it that refers to this setting.
    Is there a reg key or a setting in the MSI I can change to disable this setting?
    Edit:
    This is for Reader X

    I have been able to figure out the answer, so I'll put it into here in case anyone else wants to do this.
    The following registry key has to be added to the msi or mst
    HKCU > Software > Adobe > Acrobat Reader > 10.0 > AVGeneral
    Dword - bBrowserDisplayInReadMode = 0

  • How to set Lightroom (3 or 4) to open in 'Library mode' by default

    Is there a way to set Lightroom (3 or 4) to open in 'Library' mode by default ? - Thanks for your help, IM

    Other than exiting in Library mode, I don't think so.
    You could train yourself to always hit the G key first thing when you get control. After a while, you wouldn't even have tho think about it.
    Hal

  • Login screen comes up repeatedly, booting into safe mode by default

    Good Morning,
    I have an iMac (Lion 10.8) that is having a lot of trouble.  I manage an Elementary School's IT fleet.  At the end of last year, the computer was booting into Safe Mode by default.  Once the system came up, the teacher could use it - but it took so long to boot that she chose not to.  The teacher left the school, and I was planning to just format it and reimage.  Here is what I have happening. 
    Boots into safe mode on it's own
    Once it's done booting, the login screen shows up - but entering any credentials just gets a grey screen, and the login screen comes right back.  Even root.  Which means I can't get logged into the computer at all. 
    Recovery mode will not allow me to erase the drive, says failed and not able to access the drive. 
    Target mode will also not allow me to erase the drive, nor will it allow me to push over an image.  Scanning the drive failed, busy. 
    Disk repair says unable to repair disk - please format. 
    These are the things I have tried. 
    Reset PRAM (three times over the course of troubleshooting)
    Replaced the RAM completely
    Unplugged 15 seconds trick
    Accessing via Target mode - Drive is greyed out, but shows up
    Ran FSCK manually, and it completed
    Tried to do a netinstall, but the disk does not show up in netboot as an option. 
    I thought maybe the drive was bad, but considering that it will boot into safe mode eventually (although you can't login), and FSCK completed successfully -  I'm just not sure!  I just thought I'd pick your brains.  I'm usually a Windows \ Linux Administrator, so this Apple business is new to me   I'm learning!  Although I find them frustrating.  Any help would be greatly appreciated! 
    Thank you

    I thought maybe the drive was bad, but considering that it will boot into safe mode eventually (although you can't login),
    Some part of the disk may be bad while others are good.  i/o could be trying multiple times and eventually succeeding.
    Ran FSCK manually, and it completed
    You run FSCK in single user mode?  This is very surprising.  FSCK verifies the filesystem is in order.  Actual data blocks could be bad. Would be a surprise if no file system blocks were not also bad.
    Except for this fact, it seems like a hd problem.  Intermediate problem.  Heat problem, etc.
    Time to try a different hd.  See if that works.  Could be some other hardware problem.  Try external drive/flash drive, etc.
    Mac OS X is BSD Unix.

  • How to make CS6 Camera Raw process in 16 bit mode by default

    I just received my Adobe Photoshop CS6 and downloaded the current updates. I have noticed that when I download raw images into Bridge the Metadata indicates that the images have a '16 Bit Depth' but when I open the images in Camera Raw the 'Image Mode' indicates that the image is only 8 bits. I never had this problem with CS4 as it would always open the images as '16 bit' so how can I get CS6 to process the raw images as 16 bit by default?  Thanks for any help!!!

    Hi,
    In the camera raw dialog click on the Workflow Options at the bottom of the camera raw dialog
    and under Depth set it to 16 bits/channel.

Maybe you are looking for