Model Class Assignment & Polling in BPEL

Hi,
We are currently stuggling with the following issues:-
BPEL
We are need to know, how to assign the elements of soap body to a model class and then that model class to session bean in bpel flow, visa-versa.
Polling
We are using 'Oracle Bpel Manager' to publish our services. As of now we are receiving the request--> We process it --> Send back the response to the client.
But now our client requires implementing polling in Bpel i.e. instead we are sending the response to client, client need to poll for the response.
Case 1
If response is not ready and if there is any error we have to give the error msg as a response when the client poll for response.
Case 2
If there is no error and response is not ready then we supposed to give the acknowledgment msg to the client, when the client poll for response.
Case 3
If response is ready then we have to give the response when the client poll for it.
We checked about the correlation/sensors/Event handlers. But we didn't get any proper concrete answer.
Please help to resolve the above mentioned issues.
Regards,
Himanshu

Hi,
I checked the same still no luck. I checked approx all combination.
First I created a SOA-SAR file(jar file) , I extracted it and checked all jar files were there. orabpel.jar and bpm-services.jar and log4j jar. when i deployed that jar file. but it was not working
then I put this in weblogic sever lib. it not worked.
please tell me some points

Similar Messages

  • ContextException  the assigned model class info has no property

    Hello,
    Please someone can help me?
    1. I've changed a WSDL Model (new attributes)
    2. I've have cheked and add the new atrributes to the mapping (component & view)
    3. I've rebuild the project succesfuly.
    4. When I try to run the wd app I have the following error,
    com.sap.tc.webdynpro.progmodel.context.ContextException: AttributeInfo(path=Wdhrsolposv2_Comp/Wdhrsolposv2_Comp.Request_NewOperation.NewOperation.In.JTipoJornada, class=com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo): the assigned model class info has no property JTipoJornada
    Caused by: com.sap.tc.webdynpro.progmodel.context.ContextException: AttributeInfo(path=Wdhrsolposv2_Comp/Wdhrsolposv2_Comp.Request_NewOperation.NewOperation.In.JTipoJornada, class=com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo): the assigned model class info has no property JTipoJornada
    Any ideas? What else I have to do?
    Thanks & Regards
    SU

    You'r right!! Same case of my other thread.
    Thanks
    Best Regards
    SU

  • ATM model with Servlet and Cookies(class assignent)

    i am struggling starting a class assignment. I am suppose to use and access database, a servlet and cookies. If i understand correctly the servlet will have the buttons and GUI? What would i use the cookies for? or how would i use cookies in such an application? Please help.
    ty,
    max

    A servlet will typically generate HTML content. The generated HTML will contain tags which will be rendered into buttons and the like. Cookies are used for persisting state about a particular web browser across several sessions. For example, if a user enters their name in your system you could set a cookie (which would be stored on the client's machine). Then, when they return to the site you can re-access the cookie which was originally set.
    Good luck,
    -Derek

  • Error while creating model classes, operation aborted in NWDS

    Hi All,
    When i select Adaptive rfc 2 model  and then search for the RFC,  when i select RFC and click on next i get an error while importing :
    Error while creating model classes, operation aborted.
    It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
    Can any one help me out??
    Regards,
    Pradeep kumar
    Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
    Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
    Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

    Hai guys thanks for reply
    Tushar,
    I am using NWDS 7.2, ce7.2 server, ECC 6.0.
    Amit,
    I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
    Deepak,
    I am unable to create model in other projects also.
    I have sufficient amount of memory in my drive.
    I have imported the DC to other NWDS but it gives same error.
    Thanks for all,
    Regards,
    Pradeep Kumar G
    Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

  • How to set the Model Class for a newly created Model Node ?

    Hello All,
      I am trying to map a Model node from SourceA to DestinationB.
      To do so, I created a model node for Destination B in the interface controller (set the isInputElement to true). However why I try to map the node, I get an error saying that "Both context nodes have to be bound to a model class". Upon a closer look, I realised that the model node that I created in DestinationB has no entries under the properties.
      Does anyone knows/advise how I can add the model class entry to the model node that I have created as I am not able to do so. Or otherwise, is there a way to map a model node to another model node across different components ? Thank you very much.
    from
    Kwok Wei
    from
    Kwok Wei

    Hello Pascal
      The instructioons that you gave are for mapping the model between the view controller and the component controller within the same component is that right ?
      I am tryng to map a model node in the component controller of SourceA to another model node that belongs to another Component. I do believe that in this case I will need to create a model node in the interface controller of DestinationB and map that to the component controller of SourceA. However, by creating my own model node, how do I change the property modelClass in the context ?
      Thanks !
    from
    Kwok Wei

  • How to implement custom Model Class in Oracle ADF?

    I am using Oracle ADF for one of my project and i am using Query component of ADF. For given tables the query component creates view objects and maps the relations. ADF uses its own custom model class for this component and it should understand the DB tables. But for my project i have no access to database. All i can do is pass a string or object/query to the existing (custom) Java class/object, and this model class formulates query and queries the database and returns the value to my Java class. I have to display these results using ADF to the front end. Is There a way to achieve this? Can i replace/override the existing Model class of ADF. If so how?
    Thanks in advance for your help.

    Hi, there:
    Best thing to do is to start with the default login.html page, and then modify it. The login screen is fairly complex and it's easy to just miss a JS function you need to call. To get to default page, you would need to do one deploy (to simulator or whatever), and then look for login.html page in the temporary Xcode or Android project generated from the deployment. It should be under the "deploy" directory in your JDev workspace.
    You can also see all the framework JS files and CSS files that way as well.
    We have had customers implementing custom login screen so we know it can work, but they all had to start with the default login screen and then modify it.
    Thanks,
    Joe Huang

  • Flex with any ORM - Writing Model classes and action scripts redundant?

    Hi,
    I am using Hibernate with Flex. I have all my model classes
    as POJOs. Now if i have to access these POJOs directly from flex, I
    need to write action script reference classes for all my POJO model
    classes. Since mapping POJOs with action script reference classes
    is so mechanical, i am wondering if there is any tool to read all
    the properties from the POJO's and convert them to action script
    reference classes automatically. Is there any way that this can be
    automated?
    Thanks in advance.
    Chandu.

    If you use Granite Data Services, there's something called
    "gas3" (I think is the name). You may be able to use it even if you
    don't use Granite.
    I didn't care for learning how to use it (plus it uses
    Groovy, more needless stuff to learn I guess), so I can't say how
    well it works. I just wanted a simple custom ant task that
    generates ActionScript classes for my Java classes. So I ended up
    making my own. It's definitely not trivial but it's not that hard
    if you're very good with Java and reflection.

  • Can't fill ByteArray in EJB-Method with generated Model-Class from WD-Model

    Hello everybody,
    i try to call an ejb-method with data from an FileUpload-UI-Element in WD. The EJB-Method is receiving the byte-data to create a document in KM via a Web-Service.
    The ebj-methid has the following signature:
    public FObject putFileDataSimple (byte [] btContent, String fullFileName, String username, String password)
    After importing the Model and creating a context node i have the following structure:
    Request_X_putFileDataSimple
    +---btContent (Node)
          +-- item
    + fullFileName
    + username
    + password
    btContent is of the generated Type Byte_Item, which is itself a generated Model-Class of modelClassType ARRAY
    item is of Type byte
    But i simply have problems to fill the context node (or the binded model-object). i tried different ways and looked at thread [https://www.sdn.sap.com/irj/scn/thread?messageID=1954223] but i cant get it work.
    So my Method in WD looks like this to fill the structure and start the ejb-method:
    public boolean putKMDataSimple( com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource fin )  {
    try
      wdContext.currentRequest_X_putFileDataSimpleElement().setFullFileName("abc");
      wdContext.currentRequest_X_putFileDataSimpleElement().setUsername("def");
      wdContext.currentRequest_X_putFileDataSimpleElement().setPassword("xxx");
      byte[] buffer = new byte[1];
      InputStream in = fin.read(false);
      int i = 1;
      int j = 0;
      while (i!=-1)
         i = in.read(buffer);
         if (i!=-1)
           Byte_Item bi = new Byte_Item(mAlf);     // mAlf ist global defined Model-Class-Instance
           bi.setItem(buffer[0]);
            wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().addBtContent(bi);
      wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
    Doing this results in Error-Messages like:
    Model-Object is not a complex type for every byte added this way.
    And finally an IllegalArgumentException at java.lang.reflect.Array.set(Native Method)
    The second way i tried is:
    public boolean putKMDataSimple( com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource fin )  {
    try
      wdContext.currentRequest_X_putFileDataSimpleElement().setFullFileName("abc");
      wdContext.currentRequest_X_putFileDataSimpleElement().setUsername("def");
      wdContext.currentRequest_X_putFileDataSimpleElement().setPassword("xxx");
      byte[] buffer = new byte[1];
      ArrayList<Byte> btlist = new ArrayList<Byte>();
      InputStream in = fin.read(false);
      int i = 1;
      int j = 0;
      while (i!=-1)
         i = in.read(buffer);
         if (i!=-1)
              btList.add(buffer[0]);
      wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().setBtContent(btList);
      wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
    Trying so results in:
    java.lang.ClassCastException: class java.lang.Byte:null incompatible with interface com.sap.tc.cmi.model.ICMIModelClass:library:com.sap.tc.cmi(at-sign)[email protected]@alive
    whenn calling the setBtContent Method
    I don't what to do now to fill the context/model-object the right way.
    Any helpfull hints are very welcome
    Edited by: Matthias Hayk on Dec 1, 2008 5:51 PM
    Edited by: Matthias Hayk on Dec 2, 2008 10:56 AM

    Ok Vesselin and thanx for your idea,
    so i adapted the source in the way you told like the following:
                     ArrayList<Byte_Item> btlist = new ArrayList<Byte_Item>();
                     byte[] buffer = new byte[1];
                     InputStream in = fin.read(false);
                     int i = 1;
                     int j = 0;
                     while (i!=-1)
                          i = in.read(buffer);
                          if (i!=-1)
                               // Byte gelesen
                               Byte_Item bi = new Byte_Item(mAlf);
                               bi.setItem(buffer[0]);
                               btlist.add(bi);
                               j++;
                     wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().setBtContent(btlist);     
                     wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
    This results also in the following Exception when exceuting the WS-proxy:
    execute
    [EXCEPTION]
    java.lang.IllegalArgumentException
    at java.lang.reflect.Array.set(Native Method)
    at com.sap.tc.webdynpro.model.ejb.model.EJBGenericModelClassExecutable.getInputParameters(EJBGenericModelClassExecutable.java:215)
    at com.sap.tc.webdynpro.model.ejb.model.EJBGenericModelClassExecutable.execute(EJBGenericModelClassExecutable.java:112)

  • MVC Problem with getter method of table attribute in model class

    Hi,
    I am on 620 SP34. I am writing a bsp application with mvc. One of the model classes has an attribute of type table. I use this attribute in a htmlb-tableview and '//MODEL/ZMY_TAB' for data binding. If I try to activate a getter method for this attribute, the application dumps with exception <i>BSP exception: Structure component with name "ZMY_TAB" does not exist</i>. I find the SAP source, that raising this exception (see below). The source code looks like: <i>"I don't support getter methods for tables in attribute path"</i>! The setter method works fine, so I am at a loss. Has anyone of you wrote a getter method for an table attribute in bsp-mvc? Have I to consider anything special?
    Thanks,
    Carsten
    Main Program CL_BSP_MODEL==================CP
    Source code of CL_BSP_MODEL==================CM00Z
    METHOD IF_BSP_MODEL_BINDING~GET_ATTRIBUTE_DATA_REF
           * check if attribute exists for binding!                                   
             if exists_attribute( l_name ) is initial.                                
               return.                                                                
             endif.                                                                               
    * setter or getter defined? Not supported for DATA REF requests            
             if get_getter( attribute_name = l_name ) is not initial.                 
               raise exception type cx_bsp_inv_component                              
                 exporting name = l_name.                                             
             endif.                                                   

    You have two options:
    1. Make your attributes public. It should work fine.
    2. If you need to process the attribute values before it is used, you can make the attribute private but will need three methods
    GET_T_ZMY_TAB that returns the table
    SET_T_ZMY_TAB that sets the values
    GET_M_T_ZMY_TAB that returns DDIC information about the attribute. The same holds good for structures(Change to GET_S_ and GET_M_S_ ) and simple attributes(Change to GET_ and GET_M_).
    The set and get methods are kind of documented at http://help.sap.com/saphelp_nw04/helpdata/en/fb/fbb84c20df274aa52a0b0833769057/content.htm but there is no mention of the GET_M_ methods. I could not find one single document on the Model part MVC.
    Once I added the GET_M_XYZ methods to my attributes, my BSPs started to work fine.
    Cheers
    Sreekanth

  • Model class deleting in Web Dynpro

    Hi ,
    I want to delete few model classes which I imported from RFC which are redundant. Is there any way I can delete these classes.
    From the ABAP end also few RFC’s have been deleted and now I am getting error at the Web Dynpro end.
    Your reply greatly appreciated.
    Regards,
    Rakesh

    Hi,
    Delete the model node from the custom controller which is bound to the RFC node during the mapping. and also delete the methods created in custom controller to call the execution of RFC. then remove the model from the used models area. Reimport the model and do the mapping steps.
    regards
    karthik

  • How to change of Messge classe assigned to Call point?

    Dear friends
    I have defined one validation, in line item call point - 2, I have defined one message class. Now I want to change the message class assigned to call point 2 ie. line item.
    Please help me how to change the message class.
    Thanks in advance.
    Regards
    Kiran A

    hi
    Message class cannot be changed ... As message class is for one particular submodule
    eg: message class for account receivable /account payable
    message class for asset accounting.
    So if you have created a validation you might have created for account receivable so message class for account receivable would be displayed by default you cannot change it to message class for asset accouting . you have option for changing message no but not message class.

  • Questiong in using a model class

    I'm pretty new with the MVC design pattern. When using the model class, I don't know what is the more advantages of using the model class instead of using an application class.
    Moreover, in my application, there are two pages. One is used for searching screen, and the other is used for displaying a result. I try to use the model class to receive all input parameters passed by the view. Everything is fine. After users clicks a search button, a search controller will call the subcontroller which displays a result. At this point, I cannot figure out the best place where calling subcontroller should be. Right now, I put it in the do_request method; nevertheless, I have to detect the search event in this do_request method, as well. In my view, it seems strange! Are there any other solutions or examples matching my problem.

    MVC design pattern is to seperate out different logic. and at the same time keeping them as a seperate entity so that they can be used multiple times(reusability) in different controllers or so.
    yes it is posible to implement the same using application class. like we can make 1 class for mode(business logic) and one for control(class 2) and now make our application class which will inherit these two. this way it will work fine. but in this  yet we are seperating the business and control logic but we are not able to make the act as a seperate entity. the objects  of their type will be live via application class throughout the application.
    and if we make them as a different class instead of inheriting them in application class, and instatiate them whenever require, then that is MVC, that is what we are doing. we are just bypassing application class since we can directly use  class of controller type(super class CL_BSP_CONTROLLER).
    there is no such heirarchy type layering in MVC, these are like three different objects and we are making them communicate to each other so that functionality of each can be seperate out.
    hope this clears your doubt.
    there is a application like you are looking for:
    check it:
    http://help.sap.com/saphelp_erp2004/helpdata/en/12/1eeeb4245d1f4f96c989519261b0f6/frameset.htm
    it is in sap as : bsp application : TUTORIAL_4_MVC  
    it has a controller for searhing search.do
    hope this helps,
    regards,
    Hemendra

  • Model class is initial in subcontroler

    Hello,
    I have a controller class ZCL_ACCOUNT_EDIT which inherits from main controller class ZCL_ACCOUNT_MAIN and this one inherits from CL_BSP_CONTROLLER2. In MAIN I create the object for the model class in DO_INIT
    * create model object:
      acc_model ?= create_model( class_name = 'ZCL_ACCOUNT_MODEL'
                                 model_id   = 'account_model' ).
      set_model( model_id = 'account_model'
                 model_instance = acc_model ).
    * create subcontrolers:
      subedit ?= create_controller( controller_name = 'edit.do'
                                    controller_id   = 'editctrl' ).
    in DO_HANDLE_EVENT I call the controller EDIT.DO like this
    navigation->goto_page('edit.do').
    and it happens that the model class is initial. It seems like the subcontroller is being created again.
    Can someone tell me, what the problem is ??
    Thanks !!

    I found it

  • Activation error : context model node has not been bound to a model class

    Hi All,
    I have DC project, which i am able to run without error, But when i try to activate this DC project, I am getting below error in activation log : Please help me out, It's very urgent...
    [wdgen] [Info]    Generating packages/com/ltli/crtmachineord/models/zp3019_dealer_default_valuesmodel/Zp3019_Dealer_Default_Values_Output.java
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Zp3019_Salesorder_Mac_Texts_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Text [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Text [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode T_Contract_Note_Text [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode T_Contract_Note_Text [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Zp3019_Get_Employee_Name_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Name [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Name [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CustnoView --> Caption grp_equipmentnumber_Header: UIElement does not have a label
         [wdgen] [Warning] com.ltli.crtmachineord.views.longtextview.LongTextView --> TextEdit txe_LongText: UIElement does not have a label
         [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.MatnoView --> Caption grp_equipmentnumber_Header: UIElement does not have a label
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesDocType_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesOrg_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label DistChannel_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label Division_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesOffice_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesGroup_Lbl [labelFor]: Value is not valid
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label Plant_lbl [labelFor]: labelFor is not set
         [wdgen] [Error]   com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> TextView txv_Ename [text]: Context element and property are not compatible
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_CustNo [labelFor]: labelFor is not set
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_ConsigneeTo [labelFor]: labelFor is not set
         [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_Pin [labelFor]: labelFor is not set
    Thanks
    Sandy

    We could resolved the problem by creating new DC project
    and copying the content of existing Dc project into new DC.
    (Also created new activity for this new DC), Build & Deploy the project.
    Now we are able to activate the new activity without any error.
    Thanks
    Sandy

  • Problems calling java classe using WSIF in BPEL 10.1.3.3

    Hi,
    I am working on a POC for a telecom gaint in Sweden. One of their requirement is to invoke java library.
    Inorder to do it, I have followed the below steps:
    1. Wrote a wrapper java code to a class in this library.(Attached with this mail)
    2. Using JDEV 10.1.3.3 created a wsdl file of WSIF binding type for invoking this wrapper class.(Attached with this mail.)
    3. Created the required fascade classes using the SCHEMAC option in command prompt.
    4. Placed all the class files including the wrapper class file in %BPELHOME%\bpel\system\classes
    5. Created a BPEL process to invoke the wsif wsdl.
    However while Invoking the BPEL process I am getting the error"com.collaxa.cube.ws.wsif.providers.java.WSIFOperation_Java@9ecad : Could not invoke 'authenticate'; nested exception is:
         org.collaxa.thirdparty.apache.wsif.WSIFException: No method named 'authenticate' found that match the parts specified"
    Can someone tell me how to resolve this issue.
    I have to do a presentation on this in 2 days.
    Thanks for the help.
    Regards,
    Gautham

    Hi in BPEL XML,
    Enter the credientials,
    I have pasted the Sample BPEL file.
    <?xml version="1.0"?>
    <BPELSuitcase>
         <BPELProcess id="BankTransferFlow" src="BankTransferFlow.bpel">
              <partnerLinkBindings>
                   <partnerLinkBinding name="client">
                        <property name="wsdlLocation">BankTransferFlow.wsdl</property>
                   </partnerLinkBinding>
                   <partnerLinkBinding name="bankTransfer">
                        <property name="wsdlLocation">BankTransferServiceDesign.wsdl</property>
                        <property name="wsdlRuntimeLocation">BankTransferService.wsdl</property>
                        <property name="java.naming.security.principal">oc4jadmin</property>
                        <property name="java.naming.security.credentials">welcome1</property>     
                        <property name="dedicated.connection">true</property>          
                   </partnerLinkBinding>
              </partnerLinkBindings>
    <configurations>
    <property name="testIntroduction"><![CDATA[
         This demo showcases the integration of session beans into
         an end-to-end business process. The database has 2 accounts 11111 and 22222 and both of them have initial balance 1000.
         ]]></property>
    <property name="defaultInput"><![CDATA[<BankTransferFlowRequest xmlns="http://samples.otn.com">
    <fromAccount>11111</fromAccount>
    <toAccount>22222</toAccount>
    <amount>10</amount>
    </BankTransferFlowRequest>
    ]]></property>
    <property name="transaction">participate</property>
    <property name="inMemoryOptimization">true</property>
    </configurations>          
         </BPELProcess>
    </BPELSuitcase>
    Thank you,
    [email protected]

Maybe you are looking for

  • Why do I get an error message when I try installing the free trial for Adobe Illustrator

    I'm trying to install the free trial for Adobe Illustrator and keep getting this message: The address wasn't understood Firefox doesn't know how to open this address, because one of the following protocols (aam) isn't associated with any program or i

  • [Flash CS3] Resolution Issues

    Hello, I've been trying to piece together a FLA for the past few days now, only to encounter problem after problem. I've managed to overcome all but one problem I have been experiencing in Adobe Flash CS3 Professional, being a resolution problem. I'v

  • NVIDIA GTX 285 or FX 4800?

    I'm using CS4 Premiere Pro. My camcorder uses AVCHD and I wanted to speed up the rendering and encoding of the video files. I have multiple monitors so I would need two of them. Would you rather go with two GTX 285 or two FX 4800 in SLI mode consider

  • How to make GUI application run fast and use less memory?

    Hi, there, My GUI application have: Menu, toolbar, filechooser, JTable, and log panel.(There is not much file io operation) When I run it in my machine, it is so slow, and if I run several times, close it after each run, it will run out of my memory.

  • Simultaneous audio outputs on MacPro?

    I tried creating an aggregate device in audio-midi setup, no luck. What I want is to have audio out of iTunes sumultaneously through headphones and the line out (or digital out). Is this possible? I also have a Motu 828mk2 and cannot get audio out wi