Model # WX-GT90BT - Bluetooth/App Remote Radio w/Pandora

Serial Number Location: On the bottom of the unit.
Attachments:
WXGT90BT_install_EN_FR.pdf ‏211 KB
WXGT90BT_mksp.pdf ‏272 KB
Warranty_327264302.pdf ‏88 KB
WXGT90BT_EN_FR.pdf ‏4103 KB

Hello tfxclark,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Use AirPlay to wirelessly stream content
http://support.apple.com/kb/ht4437
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Have a nice day,
Mario

Similar Messages

  • Celeste bluetooth app error

    celeste bluetooth app
    i m using ios 4.3.3
    i got error
    The remote device does not support the OBEX Push Profile or it is currently disabled.
    On OS X, for example, turn on Bluetooth Sharing under Sharing Settings in System Preferences. The transfer has failed.
    Has anyone an idea how to fix this?
    can any 1 tell me y i m getting this error

    Hello AbhishekMassey
    This Knowledge Based will guide you to solve that problem: KB24395 Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone
    Good luck and let us know. 
    • Click Likes to appreciate those who helps you
    • If your issue solved, mark the best post in your thread as Solution

  • HT202213 I lost my Apple TV remote. I have the app (Remote) for Apple TV and It doesn't work because home shearing is off on the Apple TV. How can I turn home shearing to be able to use the application (remote)?

    How to turn on Home shearing on Apple TV without remote? I lost my remote and to be able to use the app (remote) I need home shearing on. 

    You have to have the remote.  A replacement is only $20.

  • I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV through IPad wherever by using wireless and App Remote

    I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV in my IPad wherever by using wireless and App Remote??

    If you have an iPad 2 you can wirelessly mirror it to your TV via the ATV device. If you have an iPad 1 then you can use airplay but not all apps are enabled to push video, as the developer needs to do this.
    You can also view all local content from iTunes or your iPad, pushed via airplay/home-sharing.
    The other services available are iTunes movie rentals, TV shows (past purchases viewable from the cloud), Photo Stream, Netflix, Vimeo, Podcasts, Youtube, Sports etc.
    More info
    http://www.apple.com/appletv/

  • Looking for a bluetooth app...

    Hello all, i am looking for a simple bluetooth app that i can just press to turn on/off my bluetooth, its no use to me when its not in my car, it drains my battery and its annoying haveing to keep going into the settings to turn it on/off, is there an app of such nature?

    Sorry, there is not.

  • Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

    Hi there,
    I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
    Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
    connect I get the following message "couldn't connect -  We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
    Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
    to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
    RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
    can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
    Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
    the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
    being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
    VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
    Many thanks,
    RocknRollTim

    Any help would be much appreciated.
    Kind regards,
    RocknRollTim

  • Ssh X11 forwarding takes too long to start any app. remotely

    Hi,
    I have a bizzare problem with %subject% for some time already.
    Affected are all my Arch linux installations (all with: systemd, openbox (without Display Manager), and latest updates):
    1. home desktop (core 2 duo, 2.4GHz, 3GB RAM).
    2. one testing desktop in virtualbox on the desktop from prev. point.
    3. work laptop (Intel Core i5, 4GB RAM).
    All of these are connected via cable to the same home network 100MB router (using openwrt on asus wl-500g).
    Normal ssh transmissions, like entering commands, or transfer of data via scp (even large amount of data for testing purposes because of this) works quick like expected.
    The problem is, that if I try to start app. remotely via ssh X forwarding from and to any of these (affected also bidirectional), it takes always aprox. 2 minutes to start the app.
    Afterwards, it works fast and fine.
    Doesn't change anything, whether the X server is running on the server's side or not.
    Have been testing it with some lightweight apps too, but makes no difference if it's e.g. mousepad, gedit, thunderbird, always the same 2 min. delay at their start.
    Also, some time ago, I had an older (more than 10 years) laptop, also with Arch installed, using LXDE, and connected via wifi to this same router, which worked perfectly without any delay. Also the same time ago, I was yet running Ubuntu on the home desktop, when I installed Arch to the virtualbox mentioned in point 2, and the problem was already present on the virtual pc, but not on the Ubuntu or the older laptop with Arch I had before.
    Later, when I switched home desktop to Arch (or I got new laptop in the work), the issue appeared instantly on the new Arch installations.
    The sshd configuration is the basic from the package, with X forwarding enabled of course, thus no strange changes of mine.
    I monitored the ssh communications with tcpdump, not to read the encrypted data itself , but to see whether the data is flowing, and there are flow outages (absolute quiet except of below mentioned exceptions) in the mentioned 2 minutes duration till app. startup:
    - after ssh authentication, there is about 1 minute silence, when after this 1st minute some few data is flowing
    - next, there is another 1 minute silence, after which the app. finally starts
    I've also gathered ssh debugging informations, from both, server (where I'm connecting and trying to start app. remotely) and client, with description when waiting has been detected.
    server:
    /usr/sbin/sshd -ddd
    debug2: load_server_config: filename /etc/ssh/sshd_config
    debug2: load_server_config: done config len = 501
    debug2: parse_server_config: config /etc/ssh/sshd_config len 501
    debug3: /etc/ssh/sshd_config:15 setting ListenAddress 0.0.0.0
    debug3: /etc/ssh/sshd_config:16 setting ListenAddress ::
    debug3: /etc/ssh/sshd_config:35 setting LogLevel INFO
    debug3: /etc/ssh/sshd_config:42 setting PermitRootLogin no
    debug3: /etc/ssh/sshd_config:52 setting AuthorizedKeysFile .ssh/authorized_keys
    debug3: /etc/ssh/sshd_config:68 setting PermitEmptyPasswords no
    debug3: /etc/ssh/sshd_config:71 setting ChallengeResponseAuthentication no
    debug3: /etc/ssh/sshd_config:92 setting UsePAM yes
    debug3: /etc/ssh/sshd_config:94 setting AllowAgentForwarding yes
    debug3: /etc/ssh/sshd_config:95 setting AllowTcpForwarding yes
    debug3: /etc/ssh/sshd_config:97 setting X11Forwarding yes
    debug3: /etc/ssh/sshd_config:98 setting X11DisplayOffset 10
    debug3: /etc/ssh/sshd_config:99 setting X11UseLocalhost yes
    debug3: /etc/ssh/sshd_config:104 setting UsePrivilegeSeparation sandbox
    debug3: /etc/ssh/sshd_config:106 setting Compression delayed
    debug3: /etc/ssh/sshd_config:109 setting UseDNS no
    debug3: /etc/ssh/sshd_config:120 setting Subsystem sftp /usr/lib/ssh/sftp-server
    debug1: sshd version OpenSSH_6.1p1
    debug3: Incorrect RSA1 identifier
    debug1: read PEM private key done: type RSA
    debug1: private host key: #0 type 1 RSA
    debug3: Incorrect RSA1 identifier
    debug1: read PEM private key done: type DSA
    debug1: private host key: #1 type 2 DSA
    debug3: Incorrect RSA1 identifier
    debug1: read PEM private key done: type ECDSA
    debug1: private host key: #2 type 3 ECDSA
    debug1: rexec_argv[0]='/usr/sbin/sshd'
    debug1: rexec_argv[1]='-ddd'
    debug3: oom_adjust_setup
    Set /proc/self/oom_score_adj from 0 to -1000
    debug2: fd 3 setting O_NONBLOCK
    debug3: sock_set_v6only: set socket 3 IPV6_V6ONLY
    debug1: Bind to port 22 on ::.
    Server listening on :: port 22.
    debug2: fd 4 setting O_NONBLOCK
    debug1: Bind to port 22 on 0.0.0.0.
    Server listening on 0.0.0.0 port 22.
    debug3: fd 5 is not O_NONBLOCK
    debug1: Server will not fork when running in debugging mode.
    debug3: send_rexec_state: entering fd = 8 config len 501
    debug3: ssh_msg_send: type 0
    debug3: send_rexec_state: done
    debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8
    debug1: inetd sockets after dupping: 3, 3
    Connection from CLIENT_IP port 43333
    debug1: Client protocol version 2.0; client software version OpenSSH_6.1
    debug1: match: OpenSSH_6.1 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_6.1
    debug2: fd 3 setting O_NONBLOCK
    debug3: ssh_sandbox_init: preparing seccomp filter sandbox
    debug2: Network child is on pid 6379
    debug3: preauth child monitor started
    debug3: privsep user:group 99:99 [preauth]
    debug1: permanently_set_uid: 99/99 [preauth]
    debug3: ssh_sandbox_child: setting PR_SET_NO_NEW_PRIVS [preauth]
    debug3: ssh_sandbox_child: attaching seccomp filter program [preauth]
    debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
    debug1: SSH2_MSG_KEXINIT sent [preauth]
    debug1: SSH2_MSG_KEXINIT received [preauth]
    debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 [preauth]
    debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
    debug2: kex_parse_kexinit: none,[email protected] [preauth]
    debug2: kex_parse_kexinit: none,[email protected] [preauth]
    debug2: kex_parse_kexinit: [preauth]
    debug2: kex_parse_kexinit: [preauth]
    debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
    debug2: kex_parse_kexinit: reserved 0 [preauth]
    debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 [preauth]
    debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss [preauth]
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
    debug2: kex_parse_kexinit: none,[email protected],zlib [preauth]
    debug2: kex_parse_kexinit: none,[email protected],zlib [preauth]
    debug2: kex_parse_kexinit: [preauth]
    debug2: kex_parse_kexinit: [preauth]
    debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
    debug2: kex_parse_kexinit: reserved 0 [preauth]
    debug2: mac_setup: found hmac-md5 [preauth]
    debug1: kex: client->server aes128-ctr hmac-md5 none [preauth]
    debug2: mac_setup: found hmac-md5 [preauth]
    debug1: kex: server->client aes128-ctr hmac-md5 none [preauth]
    debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
    debug3: mm_key_sign entering [preauth]
    debug3: mm_request_send entering: type 4 [preauth]
    debug3: mm_key_sign: waiting for MONITOR_ANS_SIGN [preauth]
    debug3: mm_request_receive_expect entering: type 5 [preauth]
    debug3: mm_request_receive entering [preauth]
    debug3: mm_request_receive entering
    debug3: monitor_read: checking request 4
    debug3: mm_answer_sign
    debug3: mm_answer_sign: signature 0x13e3f80(100)
    debug3: mm_request_send entering: type 5
    debug2: monitor_read: 4 used once, disabling now
    debug2: kex_derive_keys [preauth]
    debug2: set_newkeys: mode 1 [preauth]
    debug1: SSH2_MSG_NEWKEYS sent [preauth]
    debug1: expecting SSH2_MSG_NEWKEYS [preauth]
    debug2: set_newkeys: mode 0 [preauth]
    debug1: SSH2_MSG_NEWKEYS received [preauth]
    debug1: KEX done [preauth]
    debug1: userauth-request for user USERNAME service ssh-connection method none [preauth]
    debug1: attempt 0 failures 0 [preauth]
    debug3: mm_getpwnamallow entering [preauth]
    debug3: mm_request_send entering: type 6 [preauth]
    debug3: mm_request_receive entering
    debug3: monitor_read: checking request 6
    debug3: mm_answer_pwnamallow
    debug2: parse_server_config: config reprocess config len 501
    debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
    debug3: mm_request_send entering: type 7
    debug2: monitor_read: 6 used once, disabling now
    debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM [preauth]
    debug3: mm_request_receive_expect entering: type 7 [preauth]
    debug3: mm_request_receive entering [preauth]
    debug2: input_userauth_request: setting up authctxt for USERNAME [preauth]
    debug3: mm_start_pam entering [preauth]
    debug3: mm_request_send entering: type 45 [preauth]
    debug3: mm_request_receive entering
    debug3: monitor_read: checking request 45
    debug1: PAM: initializing for "USERNAME"
    debug1: PAM: setting PAM_RHOST to "CLIENT_IP"
    debug1: PAM: setting PAM_TTY to "ssh"
    debug2: monitor_read: 45 used once, disabling now
    debug3: mm_inform_authserv entering [preauth]
    debug3: mm_request_send entering: type 3 [preauth]
    debug2: input_userauth_request: try method none [preauth]
    debug3: mm_request_receive entering
    debug3: monitor_read: checking request 3
    debug3: mm_answer_authserv: service=ssh-connection, style=
    debug2: monitor_read: 3 used once, disabling now
    debug1: userauth-request for user USERNAME service ssh-connection method publickey [preauth]
    debug1: attempt 1 failures 0 [preauth]
    debug2: input_userauth_request: try method publickey [preauth]
    debug1: test whether pkalg/pkblob are acceptable [preauth]
    debug3: mm_key_allowed entering [preauth]
    debug3: mm_request_send entering: type 20 [preauth]
    debug3: mm_key_allowed: waiting for MONITOR_ANS_KEYALLOWED [preauth]
    debug3: mm_request_receive_expect entering: type 21 [preauth]
    debug3: mm_request_receive entering [preauth]
    debug3: mm_request_receive entering
    debug3: monitor_read: checking request 20
    debug3: mm_answer_keyallowed entering
    debug3: mm_answer_keyallowed: key_from_blob: 0x13e1e20
    debug1: temporarily_use_uid: 1000/100 (e=0/0)
    debug1: trying public key file /home/USERNAME/.ssh/authorized_keys
    debug1: Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': No such file or directory
    debug1: restore_uid: 0/0
    Failed publickey for USERNAME from CLIENT_IP port 43333 ssh2
    debug3: mm_answer_keyallowed: key 0x13e1e20 is not allowed
    debug3: mm_request_send entering: type 21
    debug2: userauth_pubkey: authenticated 0 pkalg ssh-dss [preauth]
    debug1: userauth-request for user USERNAME service ssh-connection method password [preauth]
    debug1: attempt 2 failures 1 [preauth]
    debug2: input_userauth_request: try method password [preauth]
    debug3: mm_auth_password entering [preauth]
    debug3: mm_request_send entering: type 10 [preauth]
    debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD [preauth]
    debug3: mm_request_receive_expect entering: type 11 [preauth]
    debug3: mm_request_receive entering [preauth]
    debug3: mm_request_receive entering
    debug3: monitor_read: checking request 10
    debug3: PAM: sshpam_passwd_conv called with 1 messages
    debug1: PAM: password authentication accepted for USERNAME
    debug3: mm_answer_authpassword: sending result 1
    debug3: mm_request_send entering: type 11
    debug3: mm_request_receive_expect entering: type 46
    debug3: mm_request_receive entering
    debug1: do_pam_account: called
    debug3: PAM: do_pam_account pam_acct_mgmt = 0 (Success)
    debug3: mm_request_send entering: type 47
    Accepted password for USERNAME from CLIENT_IP port 43333 ssh2
    debug3: mm_auth_password: user authenticated [preauth]
    debug3: mm_do_pam_account entering [preauth]
    debug3: mm_request_send entering: type 46 [preauth]
    debug3: mm_request_receive_expect entering: type 47 [preauth]
    debug3: mm_request_receive entering [preauth]
    debug3: mm_do_pam_account returning 1 [preauth]
    debug3: mm_send_keystate: Sending new keys: 0x13e1c40 0x13e34c0 [preauth]
    debug3: mm_newkeys_to_blob: converting 0x13e1c40 [preauth]
    debug3: mm_newkeys_to_blob: converting 0x13e34c0 [preauth]
    debug3: mm_send_keystate: New keys have been sent [preauth]
    debug3: mm_send_keystate: Sending compression state [preauth]
    debug3: mm_request_send entering: type 24 [preauth]
    debug3: mm_send_keystate: Finished sending state [preauth]
    debug1: monitor_read_log: child log fd closed
    debug1: monitor_child_preauth: USERNAME has been authenticated by privileged process
    debug3: mm_get_keystate: Waiting for new keys
    debug3: mm_request_receive_expect entering: type 24
    debug3: mm_request_receive entering
    debug3: mm_newkeys_from_blob: 0x13f3b20(122)
    debug2: mac_setup: found hmac-md5
    debug3: mm_get_keystate: Waiting for second key
    debug3: mm_newkeys_from_blob: 0x13f3b20(122)
    debug2: mac_setup: found hmac-md5
    debug3: mm_get_keystate: Getting compression state
    debug3: mm_get_keystate: Getting Network I/O buffers
    debug3: mm_share_sync: Share sync
    debug3: mm_share_sync: Share sync end
    debug3: ssh_sandbox_parent_finish: finished
    debug1: PAM: establishing credentials
    debug3: PAM: opening session
    User child is on pid 6387
    debug1: PAM: establishing credentials
    debug1: permanently_set_uid: 1000/100
    debug2: set_newkeys: mode 0
    debug2: set_newkeys: mode 1
    debug1: Entering interactive session for SSH2.
    debug2: fd 7 setting O_NONBLOCK
    debug2: fd 9 setting O_NONBLOCK
    debug1: server_init_dispatch_20
    debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768
    debug1: input_session_request
    debug1: channel 0: new [server-session]
    debug2: session_new: allocate (allocated 0 max 10)
    debug3: session_unused: session id 0 unused
    debug1: session_new: session 0
    debug1: session_open: channel 0
    debug1: session_open: session 0: link with channel 0
    debug1: server_input_channel_open: confirm session
    debug1: server_input_global_request: rtype [email protected] want_reply 0
    debug1: server_input_channel_req: channel 0 request x11-req reply 1
    debug1: session_by_channel: session 0 channel 0
    debug1: session_input_channel_req: session 0 req x11-req
    debug3: sock_set_v6only: set socket 10 IPV6_V6ONLY
    debug2: fd 10 setting O_NONBLOCK
    debug3: fd 10 is O_NONBLOCK
    debug1: channel 1: new [X11 inet listener]
    debug2: fd 11 setting O_NONBLOCK
    debug3: fd 11 is O_NONBLOCK
    debug1: channel 2: new [X11 inet listener]
    debug1: server_input_channel_req: channel 0 request exec reply 1
    debug1: session_by_channel: session 0 channel 0
    debug1: session_input_channel_req: session 0 req exec
    debug2: fd 3 setting TCP_NODELAY
    debug3: packet_set_tos: set IP_TOS 0x10
    debug2: fd 14 setting O_NONBLOCK
    debug2: fd 13 setting O_NONBLOCK
    debug2: fd 16 setting O_NONBLOCK
    debug2: channel 0: read 210 from efd 16
    debug2: channel 0: rwin 2097152 elen 210 euse 1
    debug2: channel 0: sent ext data 210
    debug2: channel 0: read 380 from efd 16
    debug2: channel 0: rwin 2096942 elen 380 euse 1
    debug2: channel 0: sent ext data 380
    debug2: channel 0: read 121 from efd 16
    debug2: channel 0: rwin 2096562 elen 121 euse 1
    debug2: channel 0: sent ext data 121
    ### Here started the waiting on the server's side, and continued later till the start of app.:
    debug1: X11 connection requested.
    debug2: fd 12 setting TCP_NODELAY
    debug2: fd 12 setting O_NONBLOCK
    debug3: fd 12 is O_NONBLOCK
    debug1: channel 3: new [X11 connection from 127.0.0.1 port 46968]
    debug2: channel 3: open confirm rwindow 2097152 rmax 16384
    debug2: channel 0: read 62 from efd 16
    debug2: channel 0: rwin 2096441 elen 62 euse 1
    debug2: channel 0: sent ext data 62
    debug1: X11 connection requested.
    debug2: fd 15 setting TCP_NODELAY
    debug2: fd 15 setting O_NONBLOCK
    debug3: fd 15 is O_NONBLOCK
    debug1: channel 4: new [X11 connection from 127.0.0.1 port 46972]
    debug2: channel 4: open confirm rwindow 2097152 rmax 16384
    debug2: channel 3: rcvd adjust 51268
    debug2: channel 3: rcvd adjust 65536
    debug2: channel 3: rcvd adjust 65536
    debug2: channel 3: rcvd adjust 65536
    debug2: channel 3: rcvd adjust 65536
    debug2: channel 3: rcvd adjust 32768
    debug2: channel 3: rcvd adjust 147456
    debug2: channel 3: rcvd adjust 55788
    debug2: channel 3: window 32740 sent adjust 32796
    client:
    ssh -Xvvv USERNAME@SERVER_IP mousepad
    OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to SERVER_IP [SERVER_IP] port 22.
    debug1: Connection established.
    debug1: identity file /home/USERNAME/.ssh/id_rsa type -1
    debug1: identity file /home/USERNAME/.ssh/id_rsa-cert type -1
    debug1: identity file /home/USERNAME/.ssh/id_dsa type 2
    debug1: identity file /home/USERNAME/.ssh/id_dsa-cert type -1
    debug1: identity file /home/USERNAME/.ssh/id_ecdsa type -1
    debug1: identity file /home/USERNAME/.ssh/id_ecdsa-cert type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
    debug1: match: OpenSSH_6.1 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_6.1
    debug2: fd 3 setting O_NONBLOCK
    debug3: load_hostkeys: loading entries for host "SERVER_IP" from file "/home/USERNAME/.ssh/known_hosts"
    debug3: load_hostkeys: found key type ECDSA in file /home/USERNAME/.ssh/known_hosts:4
    debug3: load_hostkeys: loaded 1 keys
    debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
    debug1: SSH2_MSG_KEXINIT sent
    debug1: SSH2_MSG_KEXINIT received
    debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: none,[email protected],zlib
    debug2: kex_parse_kexinit: none,[email protected],zlib
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit: first_kex_follows 0
    debug2: kex_parse_kexinit: reserved 0
    debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: none,[email protected]
    debug2: kex_parse_kexinit: none,[email protected]
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit: first_kex_follows 0
    debug2: kex_parse_kexinit: reserved 0
    debug2: mac_setup: found hmac-md5
    debug1: kex: server->client aes128-ctr hmac-md5 none
    debug2: mac_setup: found hmac-md5
    debug1: kex: client->server aes128-ctr hmac-md5 none
    debug1: sending SSH2_MSG_KEX_ECDH_INIT
    debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
    debug1: Server host key: ECDSA ABC123...
    debug3: load_hostkeys: loading entries for host "SERVER_IP" from file "/home/USERNAME/.ssh/known_hosts"
    debug3: load_hostkeys: found key type ECDSA in file /home/USERNAME/.ssh/known_hosts:4
    debug3: load_hostkeys: loaded 1 keys
    debug1: Host 'SERVER_IP' is known and matches the ECDSA host key.
    debug1: Found key in /home/USERNAME/.ssh/known_hosts:4
    debug1: ssh_ecdsa_verify: signature correct
    debug2: kex_derive_keys
    debug2: set_newkeys: mode 1
    debug1: SSH2_MSG_NEWKEYS sent
    debug1: expecting SSH2_MSG_NEWKEYS
    debug2: set_newkeys: mode 0
    debug1: SSH2_MSG_NEWKEYS received
    debug1: Roaming not allowed by server
    debug1: SSH2_MSG_SERVICE_REQUEST sent
    debug2: service_accept: ssh-userauth
    debug1: SSH2_MSG_SERVICE_ACCEPT received
    debug2: key: /home/USERNAME/.ssh/id_rsa ((nil))
    debug2: key: /home/USERNAME/.ssh/id_dsa (0x)
    debug2: key: /home/USERNAME/.ssh/id_ecdsa ((nil))
    debug1: Authentications that can continue: publickey,password
    debug3: start over, passed a different list publickey,password
    debug3: preferred publickey,keyboard-interactive,password
    debug3: authmethod_lookup publickey
    debug3: remaining preferred: keyboard-interactive,password
    debug3: authmethod_is_enabled publickey
    debug1: Next authentication method: publickey
    debug1: Trying private key: /home/USERNAME/.ssh/id_rsa
    debug3: no such identity: /home/USERNAME/.ssh/id_rsa
    debug1: Offering DSA public key: /home/USERNAME/.ssh/id_dsa
    debug3: send_pubkey_test
    debug2: we sent a publickey packet, wait for reply
    debug1: Authentications that can continue: publickey,password
    debug1: Trying private key: /home/USERNAME/.ssh/id_ecdsa
    debug3: no such identity: /home/USERNAME/.ssh/id_ecdsa
    debug2: we did not send a packet, disable method
    debug3: authmethod_lookup password
    debug3: remaining preferred: ,password
    debug3: authmethod_is_enabled password
    debug1: Next authentication method: password
    USERNAME@SERVER_IP's password:
    debug3: packet_send2: adding 48 (len 68 padlen 12 extra_pad 64)
    debug2: we sent a password packet, wait for reply
    debug1: Authentication succeeded (password).
    Authenticated to SERVER_IP ([SERVER_IP]:22).
    debug1: channel 0: new [client-session]
    debug3: ssh_session2_open: channel_new: 0
    debug2: channel 0: send open
    debug1: Requesting [email protected]
    debug1: Entering interactive session.
    debug2: callback start
    debug2: x11_get_proto: /usr/bin/xauth -f /tmp/ssh-mHE6faU7YJF2/xauthfile generate :0 MIT-MAGIC-COOKIE-1 untrusted timeout 1200 2>/dev/null
    debug2: x11_get_proto: /usr/bin/xauth -f /tmp/ssh-mHE6faU7YJF2/xauthfile list :0 2>/dev/null
    debug1: Requesting X11 forwarding with authentication spoofing.
    debug2: channel 0: request x11-req confirm 1
    debug2: fd 3 setting TCP_NODELAY
    debug3: packet_set_tos: set IP_TOS 0x10
    debug2: client_session2_setup: id 0
    debug1: Sending command: mousepad
    debug2: channel 0: request exec confirm 1
    debug2: callback done
    debug2: channel 0: open confirm rwindow 0 rmax 32768
    debug2: channel_input_status_confirm: type 99 id 0
    debug2: X11 forwarding request accepted on channel 0
    debug2: channel 0: rcvd adjust 2097152
    debug2: channel_input_status_confirm: type 99 id 0
    debug2: exec request accepted on channel 0
    ### After successful authentication, here above started the first waiting, where after first 1 min. continued with:
    debug2: channel 0: rcvd ext data 210
    debug2: channel 0: rcvd ext data 380
    debug2: channel 0: rcvd ext data 121
    debug3: Copy environment: XDG_SESSION_COOKIE=0d937ee20c7e42bdbf828421a30eaa2f-1357144247.348263-1841400888
    debug3: Copy environment: XDG_SESSION_ID=5
    debug3: Copy environment: XDG_RUNTIME_DIR=/run/user/1000
    debug2: channel 0: written 711 to efd 6
    ### After another 1 min. continued with + started the app.
    debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384
    debug1: client_request_x11: request from 127.0.0.1 46968
    debug2: fd 7 setting O_NONBLOCK
    debug3: fd 7 is O_NONBLOCK
    debug1: channel 1: new [x11]
    debug1: confirm x11
    debug2: channel 0: rcvd ext data 62
    Xlib: extension "RANDR" missing on display "localhost:10.0".
    debug2: channel 0: written 62 to efd 6
    debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384
    debug1: client_request_x11: request from 127.0.0.1 46972
    debug2: fd 8 setting O_NONBLOCK
    debug3: fd 8 is O_NONBLOCK
    debug1: channel 2: new [x11]
    debug1: confirm x11
    debug2: channel 1: window 2045884 sent adjust 51268
    debug2: channel 1: window 2031616 sent adjust 65536
    debug2: channel 1: window 2031616 sent adjust 65536
    debug2: channel 1: window 2031616 sent adjust 65536
    debug2: channel 1: window 2031616 sent adjust 65536
    debug2: channel 1: window 2031616 sent adjust 32768
    debug2: channel 1: window 1949696 sent adjust 147456
    debug2: channel 1: window 2041364 sent adjust 55788
    debug2: channel 1: rcvd adjust 32796
    debug1: client_input_channel_open: ctype x11 rchan 5 win 65536 max 16384
    debug1: client_request_x11: request from 127.0.0.1 46974
    debug2: fd 9 setting O_NONBLOCK
    debug3: fd 9 is O_NONBLOCK
    debug1: channel 3: new [x11]
    debug1: confirm x11
    debug2: channel 1: rcvd adjust 32800
    It's quite strange, as I have no more ideas what to check next.
    Any ideas pls?
    thx in advance.

    Have finally found a solution for this problem: http://serverfault.com/questions/490352 … w-to-start
    Now the applications do start immediately via SSH X11 forwarding as expected.
    The following three lines helped:
    ip6tables -A INPUT -i lo -j ACCEPT
    ip6tables -A OUTPUT -o lo -j ACCEPT
    ip6tables -A FORWARD -i lo -o lo -j ACCEPT
    While until now, all ip6 traffic has been forbidden (to drop all ip6 traffic) at the start of the system of course.
    Nevertheless, I don't understand it, why the ip6 localhost has to be granted this way even if the /etc/ssh/sshd_config is configured for ip4 only "AddressFamily inet"?
    I thought, that this way the sshd will be using ip4 protocol only (including for the X11 forwarding), then why does it still need the ip6?

  • Probleem met app remote als ik met mijn ipad of iphone de muziek aan zet krijg ik vaak geen geluid via me hdmi op mijn dennon. als ik met me macbook schermdelen aan zet of met me toetsen bord op enter druk schakeld het geluid meteen in. wie weet wat hlen

    probleem met gebriuk app remote. als ik de app remote gebruik met een ipad of iphone om itunes aan te zetten van mijn mac mini surver  dan krijg ik heel vaak geen geluid via me hdmi naar me dennon receiver. wel zie je dat het nummer afspeeld. als ik op enter druk van mijn toetsen bord of met me macbook pro me scherm deling opstart dan schakeld het geluid meteen in. wie weet het probleem hier mogenlijk van. 
    mvg patrick

  • UPDATE BLUETOOTH APPS WORK FOR OTHER DEVICES

    HI IM USING IPHONE 4 PLZ
    UPDATE BLUETOOTH APPS WORK FOR OTHER DEVICES
    BLUETOOTH APP COMPLETE IPHONE MAKE NO 1 SMART PHONE ERVER
    plz

    These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/iphone.html

  • IPhone/iPad BlueTooth app

    Is there any BlueTooth app for iPhone or iPad by which I can transfer files from my iOS devices to any other devices including iOS, Android and Windows devices and vice versa?
    If yes then can anyone please give me the ITunes link ?

    There is no app like that. Just use dropbox for windows and icloud for apple.

  • "photos" option does not appear in my interface.  Do have Music, Movies, TV Shows, Apps and Radio. Photo doesn't appear on iPhone or iPod Nano

    "PHOTOS" option does not appear in my interface.  Do have Music, Movies, TV Shows, Apps and Radio. Photo doesn't appear on iPhone or iPod Nano

    Are you looking at the tabs on the right-hand side of iTunes when you've connected and selected your device on the left-hand side of iTunes ? i.e. it should be one of the tabs that you use to chose what content to sync to the device : syncing photos

  • ITunes APP - Remote Q

    iTunes APP - Remote
    In the set up process it says " In iTunes select the name of your iPhone or iPod touch in the Devices list and enter the passcode."
    I do that but WHERE do I enter the passcode please?
    Michael

    When you first fire up Remote and add a new library it provides you with a 4 digit code.
    GOT IT.
    Now go to the source list and see iPod Remote (or something similar).
    - Where is the 'source list' - on iPod Touch? Where?
    - or iTunes ? Where?
    Thank you for your patience.
    Michael
    Click on that. Enter the code.

  • Help needed: Bluetooth App problem

    Hi all,
    I am trying to create a bluetooth app using j2me, but i am stuck and i need some help. The bluetooth app i am trying to create is a simple 2d tic-tac-toe game, which uses bluetooth to pass messages between devices in order to play the game. I can send these message in the MIDlet class,but i can't use these methods to send message from the canvas class which is used to create the tic-tac-toe user interface. I have the code available on request if anyone would like a look.
    Any help would be great, thanks the help in advance.

    I can send these message
    in the MIDlet class,but i can't use these methods to
    send message from the canvas class which is used to
    create the tic-tac-toe user interface.And WHY can't you do that? If you want help, you'll have to give us some more information...

  • I want to u the app remote on my I pad to control my Apple TV??

    I want to u the app remote on my I pad to control my Apple TV??

    In order to use the remote app home sharing needs to be enabled and both must be on the same network. You will need to use the bundled remote to set that up.

  • IPhone 4 & App "Remote"

    Does anyone know if the app, Remote, works with iPhone 4? I had no problems using it with my 3G and MacBook Pro. I can't get it to work with the new phone.

    Marie,
    With all three of my devices, the code entry would not appear in iTunes on the first try. When I went back to "Settings" in Remote and then back to "Add Library" again, it worked fine.
    Be sure you have "Look for iPod Touch, iPhone and iPad Remotes" checked in iTunes > Preferences > Devices.

Maybe you are looking for