Modify carrier in TU
In EWM version 9.1, in trx. /SCWM/TU I can't change/add the carrier for a TU.
Also with using the report for automatic creation of TU, if the carrier in ODO is missing, then a TU is created without carrier and couldn't add any carrier any more.
Please advise how to make this carrier field changeable.
Thanks a lot!
Does some body know if it's possible to change/add Carrier in transportation unit? Thanks a lot!
Similar Messages
-
How to populate the dropdown key values as shown in the below screen shot
Hi
i am trying to populate the drop down by key value for trader , for Trader we have few values i need to populate the Those values in values columns . as shown in the below screen shot .Hi,
Follow below steps
Step 1 - Create basic wdp table
Step 2 - Create context to store dropdown values Within your web dynpro application table
Now you need to create a context node to store the dropdown values, but this needs to be within the context node of your table.
For this example I will use fields CARRID and CARRNAME from structure SCARR to create the dropdown list within the table context.
Choose the attributes to represent the id and the text values
The finished context should now look like this
Step 3 - Update context mapping within VIEW
Within the Context tab of your view update the context node you have just modified (CARRIERS) right click and select 'Update Mapping'. Alternatively if this is a new context drag it from the right hand window and drop it onto the context node in the left window,
Step 4 - Update table field
Within the layout tab of the view, field the table field you want to replace with with a dropdown and remove the UI element associated with it
Now insert new dropdownbyindex UI cell element
Step 5 - Assign Dropdown Ui element to Context
Click on your UI element within the Layout tab, you will now see all the properties for this element which can be changed. You now need to assign the field within the context which you want to be displayed in the drop down i.e. it will be the CARRNAME field within context element DROPDOWN_CARR. To do this simply click on the button at the end of the 'texts' property (the one with a yellow square and circle on it) and select the correct context field.
Step 6 - ABAP code to populate dropdown list and set correct initial value
Insert the following ABAP code into the appropriate place. For this example it will go within the WDDOMODIFYVIEW method of the view.
Data: it_scarr type standard table of scarr, wa_scarr like line of it_scarr, context_node type ref to if_wd_context_node. Data: it_ddcarr type STANDARD TABLE OF if_main=>element_DROPDOWN_CARR, wa_ddcarr like line of it_ddcarr, lr_element TYPE REF TO if_wd_context_element, ld_tabix type sy-tabix, ld_index type sy-index, it_carriers type STANDARD TABLE OF if_main=>element_CARRIERS, wa_carriers like line of it_ddcarr. select * from scarr into table it_scarr. sort it_scarr by carrid. * select * from scarr into table it_scarr. context_node = wd_context->get_child_node( name = 'CARRIERS' ). * Get all rows of table and values stored in each cell currently displayed to user context_node->get_static_attributes_table( importing table = it_carriers ). if sy-subrc eq 0. loop at it_carriers into wa_carriers. free lr_element. ld_tabix = ld_tabix + 1. * assign context_node to table context context_node = wd_context->get_child_node( name = 'CARRIERS'). * assign lr_element to row of table lr_element = context_node->get_element( ld_tabix ). * assign data to dropdown of the row context_node = lr_element->get_child_node( name = 'DROPDOWN_CARR'). context_node->BIND_TABLE( it_scarr ). * Set correct initial value read table it_scarr into wa_scarr with key carrid = wa_carriers-carrid. ld_index = sy-tabix. context_node->set_lead_selection_index( index = ld_index ). endloop. endif.
Step 6 - Save, Activate and Run
Save and activate your abap web dynpro, now when you execute it you should see a drop down object similar to the following: -
Connecting to iPod Touch using Bluetooth
Can I connect to my touch using bluetooth? I have only used BT for wireless mouse and keyboard but I noticed it has selections for the iPhone and when I went to Other for devices it saw my touch. I just don't know enough about bluetooth and if this works, what benefit it has.
I know this is not the same device but this may explain what had to be done on a similar piece of hardware.
Before I start let me say I do not use my iPhone's supported/unsupported ability to use AT&T's 3G network to tether my iPhone to my MacBook Pro for internet/data use. My intention was to see what options were available and to see what methods could be use to allow communication between the Macbook and iPhone.
Something changed in or after 3.0 update. Before then I was able to set up a bluetooth connection using a unsigned/modified carrier profile that turned on the hidden option for internet tethering on the iPhone. At the time I wanted to see if was possible via bluetooth and it was but it no longer works. I think a update at AT&T's request may have broke this unsupported feature. Oddly enough it still works via USB. -
Australian iPhone (unlocked) Problems getting it to work in USA
I took my Australian iPhone with me on our trip to Hawaii in June '09 year. Although AT&T has a monopoly on iPhones in the 'states, this is not the case in Australia where all wireless providers offer them. Anyway, mine is unlocked from any network, and it was my understanding prior to the trip that T-Mobile could sell me a 'prepaid' SIM and also a data pack called 'Sidekick' for my iPhone while in Hawaii. Turns out not so simple...
I went to a T-Mobile store on Maui and the guy there explained that my phone probably would not work with one of their SIMs as it would need to have been unlocked in a particular way to work with T-Mobile. He put one of their SIMs in it anyway as a test and sure enough it did not work. We're coming to Alaska via Hawaii for 3.5 weeks in June 2010 and it would be handy to solve this problem for that trip, if in fact it can be solved.
I called a T-Mobile store today and the guy told me they have a prepaid option called FlexPay that would allow me to get a month's voice and data (EDGE at least) while I'm there with no contract. I asked him about my previous experience where a T-Mobile sim card would not work in my phone. The guy said something about the 'base stand' maybe being the issue. Does this make any sense? Any ideas how I can get an unlocked iPhone to work for me in the US or what the technical issue the T-Mobile rep is referring to might be?If the phone is unlocked, it should work on T-Mobile with no problems. The phone would need a modified carrier file but I don't think that can be talked about on this forum. You can search Google for T-Mobile USA carrier file. That will get you started.
Oh, and I think the post above mine is spam. I have no clue what it is talking about. -
Operation ' Modify attribute TSTATE ' could not be carried out for Petition
Hi Experts, when try compress a infocube appear this error
Operation ' Modify attribute TSTATE ' could not be carried out for Petition xxxx
The petition status is green.
Any idea?
Enrique.hi arvind,
i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
but the problem is still there
regards
Laksh -
If you mean you are having trouble activating your iPhone after
updating to iOS 6:
iOS 6.0.1
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
My phone is from USA and unlocked version and I paid 750 USD.
Where did you acquire this iPhone?
USA
What wireless carrier did you use before this problem?
I used BSNL - India previously. After I get problem, I used Mobily -Saudi Arabia again I got problem and I am trying to use Airtel - India.
Does the app Cydia appear on your iPhone?
What does It mean?
What does it say when you look at Settings=>General=>About=>Carrier?
Airtel 13.0It would be better for troubleshhoting if you posted back to your original question.... here
-
What data on phone are carriers allowed to access / modify?
When taking my iPhone 6 (unlocked) from the US to NTT Docomo in Japan, there was suddenly an entry in my 'Stocks' app for NTT. Also, 'docomo' was added to my auto-join WiFi network listing.
This made me concerned and I am now looking for a comprehensive listing of what carriers are allowed to access and modify on the phone when joining their network via SIM.Yahoo probably added NTT to your stocks app because of your change of location.
Your cell carrier would have nothing to do with a WiFi site, you must have connected to that site at one time. -
Need help to modify a report written using Field-Groups Concept. - Part1
Hello ABAP Experts,
I need your help to modify the following report with following requirement as I have least knowledge
about the field-group concept. Thats is the reason, I am pasting the whole code. As it is part of our
production requirement. I really appreciate your help, If its sent modifying the code required.
Modification required in the report.
To allow the sales representatives to see billed shipments and open orders for the current month.
1) Selection Screen Changes:
u2022 Add selection by Sales group and Customer group
u2022 Add sort by: 3. Ship-to / Material
u2022 Add another selection box
[ ] Open Orders and Shipments with the current month
2) For the new selection box, subtotal sales quantity and delivery quantity.
If delivered, make the sales quantity zero in the subtotal
Current report displays, in Selection Screen
Sales org:
Person Name:
Material:
Plant:
Sales Office:
Ship to Name:
Ship to Number:
Sorts Report by : 1. Person Name 2. Material
Check Boxes : 1. Open Orders 2. Delayed Orders.
report zorder LINE-SIZE 170
LINE-COUNT 58
MESSAGE-ID zv
NO STANDARD PAGE HEADING.
TABLES:
cdhdr, "Change Doc Header
cdpos, "Change Doc Item
kna1, "Customer master
likp, "Delivery Header
lips, "Delivery Item
*lips, "Delivery Item
zvbpa_lfa1, "Vendor Master
makt, "Material Desc
t001w, "Plant
tvkbt, "Sales Office
tvko, "Sales Organizations
vbak, "Sales Header
vbap, "Sales Item
zvvbak, "Sales Hdr - Time calc
vbup, "Item status
vbep, "Sales Schedule Line
vbfa, "Flow documents
vbpa, "Partners
vbrk, "Billing Header
vbrp. "Billing Item
SELECT-OPTIONS:
s_vkorg FOR vbak-vkorg OBLIGATORY,
s_ernam FOR vbak-ernam,
s_matnr FOR vbap-matnr,
s_werks FOR vbap-werks,
s_vkbur FOR vbak-vkbur,
s_name1 FOR kna1-name1,
s_kunnr FOR kna1-kunnr.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(49) text-c20.
PARAMETERS: p_sort TYPE n DEFAULT '1'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 19(40) text-022.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 19(40) text-023.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 19(40) text-024.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 19(40) text-070.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:p_open AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(48) text-072.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:p_delay AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(48) text-073.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b20.
DATA:
vbeln(11), "Document number
cancel_dt TYPE d, "Cancellation Date
BEGIN OF tabkey, "Tabkey
mandant LIKE sy-mandt,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
END OF tabkey,
name1_sp1 LIKE lfa1-name1, "Sales Carrier Name
name1_sp2 LIKE lfa1-name1, "Delivery Carrier Name
datum-1 TYPE d, "Current Dt Less 1
datum-14 TYPE d, "Current Dt Less 14
datum-90 TYPE d, "Current Dt Less 90
rpt_hdr1(170), "Report Header 1
rpt_hdr2(170), "Report Header 2
rpt_hdr3(170), "Report Header 3
cb_hdr1(170), "Control Break Header 1
line_pos1 TYPE i, "Line Print Position HDR1
line_pos2 TYPE i, "Line Print Position HDR2
line_pos3 TYPE i, "Line Print Position DET2
status, "Order Status
open, "Open Order
delayed VALUE 'D', "Delayed Order
v_comp(30). "Company Text Field
DATA: v_flagh2. " Flag for header 2 & 3
DATA: ls_comwa LIKE vbco6. "Structure for flow information
DATA: t_vbfa_tab TYPE STANDARD TABLE OF vbfa WITH HEADER LINE."Itab
for flow information
data: g_trans_id type vttk-tdlnr. "get transport id from flow
information
data v_sales_org_cpimex type vkorg value '3300'.
FIELD-GROUPS:
header,
order.
INSERT
status "Status
vbak-vkbur "Sales Office
vbak-ernam "Created By
kna1-kunnr "Customer
kna1-name1 "Customer Name
vbap-matnr "Material
vbap-werks "Plant
vbep-lddat "Load Dt
vbap-vbeln "Sales Document
INTO header.
INSERT
kna1-ort01 "City
kna1-regio "Region
likp-traid "Transport ID
lips-vbeln "Delivery Document
lips-ntgew "Net Wt
lips-gewei "Unit of Weight
vbap-kwmeng "Order Qty
vbap-vrkme "Sales Unit
vbak-bstnk "Customer PO
vbak-erdat "Sales Create Dt
vbak-ihrez "PO Release
vbak-vdatu "Req Delivery Dt
vbak-vzeit "Req Delivery Time
vbfa-vbeln "Goods issue doc
vbrk-vbeln "Billing Document
name1_sp1 "Sales Carrier
name1_sp2 "Delivery Carrier
INTO order.
INITIALIZATION.
AT SELECTION-SCREEN.
IF NOT p_sort BETWEEN 1 AND 2.
MESSAGE e022 WITH p_sort.
ENDIF.
* Report 1 or more of cancelled, delayed or open
IF p_open IS INITIAL AND
p_delay IS INITIAL.
MESSAGE e023.
ENDIF.
START-OF-SELECTION.
* Load Company Name
WRITE 'XYZ INC'(000) TO v_comp.
* Calculate Date Range
datum-1 = sy-datum - 1.
datum-14 = sy-datum - 14.
datum-90 = sy-datum - 90.
* Compose Parameter Header
PERFORM parm_hdr.
** Compose Report Header
v_flagh2 = 1.
PERFORM data_selection.
END-OF-SELECTION.
* Determine Sort
CASE p_sort.
WHEN 1.
SORT BY status vbak-ernam kna1-name1 kna1-kunnr
vbep-lddat vbap-vbeln.
WHEN 2.
SORT BY status vbap-matnr vbap-werks vbep-lddat
vbap-vbeln.
ENDCASE.
LOOP.
AT NEW status.
CASE status.
WHEN delayed.
WRITE 'Delayed Orders'(061) TO rpt_hdr1.
WHEN OTHERS.
WRITE 'Open Orders'(062) TO rpt_hdr1.
ENDCASE.
NEW-PAGE.
ENDAT.
AT NEW vbak-ernam.
IF p_sort = 1.
CLEAR cb_hdr1.
WRITE 'CAA:'(064) TO cb_hdr1.
WRITE vbak-ernam TO cb_hdr1+5.
NEW-PAGE.
ENDIF.
ENDAT.
AT NEW vbap-matnr.
IF p_sort = 2.
CLEAR makt.
SELECT SINGLE * FROM makt
WHERE spras = sy-langu AND
matnr = vbap-matnr.
CLEAR cb_hdr1.
WRITE 'Material:'(042) TO cb_hdr1.
WRITE vbap-matnr TO cb_hdr1+10.
WRITE makt-maktx TO cb_hdr1+21.
NEW-PAGE.
ENDIF.
ENDAT.
AT NEW vbap-werks.
AT order.
RESERVE 3 LINES.
SKIP 1.
NEW-LINE.
* Indicate new open item
WRITE vbap-vbeln TO vbeln.
* Find Transport ID
* Fill the structure LS_COMWA
ls_comwa-mandt = sy-mandt.
ls_comwa-vbeln = vbap-vbeln.
CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
EXPORTING
comwa = ls_comwa
TABLES
vbfa_tab = t_vbfa_tab.
IF sy-subrc EQ 0.
READ TABLE t_vbfa_tab WITH KEY vbtyp_n = '8'.
IF sy-subrc EQ 0.
SELECT SINGLE tdlnr INTO g_trans_id
FROM vttk WHERE tknum = t_vbfa_tab-vbeln.
CONDENSE g_trans_id.
ENDIF.
ENDIF.
IF vbak-erdat >= datum-1.
vbeln+10 = 'N'.
ENDIF.
CASE p_sort.
WHEN 1.
WRITE 1 vbak-vkbur.
WRITE 8 kna1-name1.
WRITE 44 vbeln.
WRITE 56 vbap-matnr.
WRITE:
75 vbap-kwmeng LEFT-JUSTIFIED,
vbap-vrkme,
100 vbak-bstnk,
vbak-ihrez,
134 vbak-vdatu,
vbak-vzeit,
154 vbep-lddat.
WRITE 166 vbap-werks.
NEW-LINE.
WRITE:
5 kna1-ort01,
41 kna1-regio.
IF name1_sp2 IS INITIAL.
WRITE:
45 name1_sp1,
ELSE.
WRITE 45 name1_sp2.
IF name1_sp1 = name1_sp2.
WRITE ' '.
ELSE.
WRITE '*'.
ENDIF.
ENDIF.
IF vbak-vkorg = v_sales_org_cpimex .
WRITE 81 g_trans_id.
ELSE.
WRITE 81 likp-traid.
ENDIF.
WRITE:
102 lips-vbeln,
115 lips-ntgew NO-ZERO LEFT-JUSTIFIED,
lips-gewei,
140 vbfa-vbeln,
152 vbrk-vbeln.
WHEN 2.
WRITE 1 vbak-ernam.
WRITE 14 vbak-vkbur.
WRITE 21 kna1-name1.
WRITE 57 vbeln.
WRITE:
69 vbap-kwmeng LEFT-JUSTIFIED,
vbap-vrkme,
92 vbak-bstnk,
vbak-ihrez,
126 vbak-vdatu,
vbak-vzeit,
146 vbep-lddat.
WRITE 162 vbap-werks.
NEW-LINE.
WRITE:
5 kna1-ort01,
41 kna1-regio.
IF name1_sp2 IS INITIAL.
WRITE:
45 name1_sp1,
ELSE.
WRITE 45 name1_sp2.
IF name1_sp1 = name1_sp2.
WRITE ' '.
ELSE.
WRITE '*'.
ENDIF.
ENDIF.
IF vbak-vkorg = v_sales_org_cpimex .
WRITE 81 g_trans_id.
ELSE.
WRITE 81 likp-traid.
ENDIF.
WRITE:
102 lips-vbeln,
115 lips-ntgew NO-ZERO LEFT-JUSTIFIED,
lips-gewei,
140 vbfa-vbeln,
152 vbrk-vbeln.
ENDCASE.
ENDAT.
ENDLOOP.
* FORM PARM_HDR *
FORM parm_hdr.
WRITE 'Program selections'(101) TO rpt_hdr1.
WRITE 'Sign'(102) TO rpt_hdr1+29.
WRITE 'Option'(103) TO rpt_hdr1+34.
WRITE 'From'(104) TO rpt_hdr1+41.
WRITE 'To'(105) TO rpt_hdr1+77.
ENDFORM. "PARM_HDR
* FORM RPT_HDR *
FORM rpt_hdr.
CASE p_sort.
WHEN 1. "When sort by CAA
WRITE 1'SOff'(066).
WRITE 8'Customer'(009).
WRITE 44'Sales Doc'(010).
WRITE 56'Material'(031).
WRITE 75'Sales Qty'(011).
WRITE 100'Customer PO'(012).
WRITE 134'Req.Del.Dt & Tm'(014).
WRITE 154'Load Dt'(015).
WRITE 166'Plnt'(016).
NEW-LINE.
WRITE 5'City'(017).
WRITE 41'Reg'(069).
WRITE 45'Carrier'(018).
WRITE 81'Transport ID'(019).
WRITE 102'Dlvry Doc'(021).
WRITE 115'Dlvry Qty'(025).
WRITE 140'PGI Doc'(026).
WRITE 152'Billng Doc'(027).
WHEN 2. "When sort by Material
WRITE 1'Created By'(008).
WRITE 14'SOff'(066).
WRITE 21'Customer'(009).
WRITE 57'Sales Doc'(010).
WRITE 69'Sales Qty'(011).
WRITE 92'Customer PO'(012).
WRITE 126'Req.Del.Dt & Tm'(014).
WRITE 146'Load Dt'(015).
WRITE 162'Plnt'(016).
NEW-LINE.
WRITE 5'City'(017).
WRITE 41'Reg'(069).
WRITE 45'Carrier'(018).
WRITE 81'Transport ID'(019).
WRITE 102'Dlvry Doc'(021).
WRITE 115'Dlvry Qty'(025).
WRITE 140'PGI Doc'(026).
WRITE 152'Billng Doc'(027).
ENDCASE.
ENDFORM. "RPT_HDR
INCLUDE zrpthdri.
WRITE:
/ rpt_hdr1.
ULINE.
IF v_flagh2 <> 0.
PERFORM rpt_hdr. "Write secondary header
ULINE.
* Control Break Header
WRITE / cb_hdr1.
ENDIF.
Continued in Part-2
Thanks a ton in advance.
Mythili Sharma
Edited by: Mythili sharma on Mar 30, 2009 3:32 AM
Edited by: Rob Burbank on Mar 30, 2009 10:46 AMHello ABAP Experts,
I need your help to modify the following report with following requirement as I have least knowledge about the field-group concept. Thats is the reason, I am pasting the whole code. As it is part of our production requirement. I really appreciate your help, If its sent modifying the code required.
Modification required in the report.
To allow the sales representatives to see billed shipments and open orders for the current month.
1) Selection Screen Changes:
u2022 Add selection by Sales group and Customer group
u2022 Add sort by: 5. Ship-to / Material
u2022 Add another selection box
[ ] Open Orders and Shipments with the current month
2) For the new selection box, subtotal sales quantity and delivery quantity.
If delivered, make the sales quantity zero in the subtotal
Current report displays, in Selection Screen
Sales org:
Person Name:
Material:
Plant:
Sales Office:
Ship to Name:
Ship to Number:
Sorts Report by :
1. Person Name
2. Material
3. Plant
4. Sales Office
Check Boxes :
1. Open Orders
2. Delayed Orders
3.Cancelled Orders
PLEASE DOWNLOAD THE COMPLETE REPORT FROM THE FOLLOWING LINK
<< Link removed >>
It would be a great help, If the program is modified according to the requirement and snd it back through send space and send link, even if u send the necessary changes to be done in the report is also appreciable.
Thanks a ton in adanvce
Mythili
I wanted to close this thread as I could not put my question in a proper format. So please reply in the new thread which is posted.
Edited by: Mythili sharma on Mar 30, 2009 2:16 PM
Edited by: Rob Burbank on Mar 30, 2009 4:24 PM -
Unable to modify maintenance view to accommodate new field
I have a database table for which I have created a maintenance view so that the fields can be edited.
Now, I modified my database table and added one more
field to it. I similarly added this new field in my view and
activated everything. But the new field is not appearing in
the "view" contents and neither from se54/sm30.
Can anybody help me with this?
I want this new field to appear in my already existing view.Goto SE54 and carry out the following steps:-
1) Enter the name of the table or view.
2) Choose Generated objects.
3) Choose Create/Change. You go to the generated objects maintenance screen.
4) Choose Change. A screen of reasons for changes appears.
Select option(s) and choose Continue.
The new field will appear in the view. -
Function module called within a loop seems to carry over global data
Hello all,
I am calling FM "RS_COVERPAGE_SELECTIONS" inside of a loop of all variants for a program and then writing the variant values to spool. If only one variant is entered on the selection screen, all the values are correct. If nothing is entered, some of the variant values are carried over from a previous variant. I am emptying the internal table returned by the FM every time before the FM executes.
Would some one be willing to run the following code for a program with many screen fields and many variants and tell me if they get the same behavior?
Thanks
Bruce
REPORT zzzz.
tables: varid, varit.
parameters: p_pgm type progname obligatory default 'ZFAPI004'.
select-options: s_var for varid-variant.
parameters: p_varval as checkbox default 'X'.
data: begin of reptab occurs 0,
report like varid-report,
variant like varid-variant,
ename like varid-ename,
edat like varid-edat,
etime like varid-etime,
aename like varid-aename,
aedat like varid-aedat,
aetime like varid-aetime,
vtext like varit-vtext,
end of reptab.
data: begin of tab_sel_options occurs 0,
flag(1) type c,
olength type x,
line like rsvar-infoline,
end of tab_sel_options.
*>> At Selection-Screen data items <<
data: w_pgm like sy-repid.
data: itab like rseui_f4 occurs 0 with header line.
data: dyname like d020s-prog value sy-repid,
dynumb like d020s-dnum value '1000'.
data: begin of dynpfields occurs 3.
include structure dynpread.
data: end of dynpfields.
data: w_tabix like sy-tabix.
data: begin of i_var occurs 0,
variant like varit-variant,
vtext like varit-vtext.
data: end of i_var.
start-of-selection.
format intensified on.
write: / p_pgm.
select * from varid
where report = p_pgm
and variant in s_var.
select single * from varit
where langu = 'E' and report = p_pgm
and variant = varid-variant.
move-corresponding varid to reptab.
move-corresponding varit to reptab.
append reptab.
endselect.
sort reptab by variant.
skip 1.
format color col_heading.
write: /03 'Variant',
18 'Create',
47 'Modify',
76 'Description'.
format color off.
skip 2.
loop at reptab.
format color col_total.
write: /3 reptab-variant,
reptab-ename(8),
reptab-edat,
reptab-etime,
reptab-aename(8),
reptab-aedat,
reptab-aetime,
reptab-vtext.
format color off.
skip 1.
if p_varval = 'X'.
clear tab_sel_options. " header
refresh tab_sel_options. " lines
call function 'RS_COVERPAGE_SELECTIONS'
exporting
report = reptab-report
variant = reptab-variant
no_import = ' '
tables
infotab = tab_sel_options
exceptions
error_message = 1
variant_not_found = 2
others = 3.
loop at tab_sel_options.
if sy-tabix < 7.
continue.
endif.
write: / tab_sel_options-line.
endloop.
skip 1.
endif. " p_varval = 'X'.
endloop.Hi
Try using the function module PRINT_SELECTIONS, within this FM, the FM RS_COVERPAGE_SELECTIONS is being called. So it will not copy the previous values.
Pass Mode as 'A' , report name and variant name, then it will display the same output.
Please try it
Shiva -
How to get carrier company name on windows phone 8.1?
how to get carrier company name on windows phone 8.1?
excuse me, i referrer the link http://stackoverflow.com/questions/26973111/get-carrier-name-cellular-mobile-operator-name-using-windows-phone-8-1 to
modify my universal app.
but i always get 0 count from the GetNetworkNames() method.
if my sim card is for 3G, but i setting 4G in highest connection speed. i got the "the pipe is being closed".
how can i solve the problem? thank you. -
I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?
You cannot return to previous state. The update re-locked the iPhone
to the original carrier. You must contact the original carrier to see if
they offer unlocking and if you qualify.
What does it say when you look at Settings=>General=>Carrier?
Be advised that if your iPhone had previously been hacked/modified/
jailbroken to work with other than original carrier, it may be impossible
for the original carrier to unlock it properly. -
How do I install software from a different carrier?
Hi, im using a curve 8900 and with Rogers... I went on the software site under rogers for the bb and the latest version is v4.6.1.378, however I see some american carriers have it at v5.0*... My question is, if I download software from a different carrier, will it work and how would I go about doing it?
Thanks...Hi and Welcome to the Forums!
By following this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
But modifying it with one change...insert, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to modify Fileadapter filename with val from JMS msg using xsl?
In my case I need to name the file based on information received in a JMS message.
I would like to receive an xml document from a JMS queue, the document will contain content as well as the name of a file to be saved off. I found references to something similar in the BPEL and ESB documentation for the file adapter by using "ehdr:setOutboundHeader(" as a means to set the outbound header value but I cannot find the mechanics of how to accomplish getting that set with a value that is selected from an incoming message in XSL code.
The examples shown indicate the creation of a pass through mechanism that would take a message from a request header and pass it along to the outbound header which is great but I need a snippet of code to get me through setting the outbound header with an element value that is sourced from the inbound message.
I also found an incomplete reference in a "Oracle SOA Suite Enterprise Server Bus" powerpoint presentation that indicates JMS custom properties support for "Property[@name="Country"]/@value" but no details were provided to assist further.
I would greatly appreciate any information you can provide.
Thank You,
JohnOk I was able to get fileadapter filenames modified.
First you cannot do this after a dbadapter query as that functionality seems to be broken. The best way to solve it for me was to simplify the problem, I started with placing the setoutbound header data after reading a simple file and ignoring the files content altogether. I do the set inside a match of the xslt using a constant value, again for simplicity. For the test just put in 'ateststring.txt' in the setoutbound header call, no need to select data from the document at this point; we will get to that. Now get that to work.
Once you have that working take a value from the incoming document and select it into a variable named myvariable then replace the 'ateststring.txt' with $myvariable. So basically its a three step process for the final solution. Select the data of interest from the document into a variable. add a select statement to make the method call just after that. Make the method call inside the select statement and prepend the variable name with the $ symbol.
So far I have only tested this file to file and file to ftp, I suspect that jmsadapter to file will work fine too. So the trick for me was to understand that if an incoming document is the result of a query that just wont do. My requirement was to take an input JMS request, use that to drive a query, take the data from the query and write it to a filename as defined in the JMS request. No matter what I did to set the frustrating fileadapter/ftpadapter filename in the header I was unable to do so. I used constant strings etc in every part of the document ( before select, inside select, outside select etc ). It wasnt until I went file to file that I was able to get this to work at all. And then not in the xslt header etc, it MUST be in an area of the document that resulted in a select match, which after review makes sense.
To work around the query to file issue, I place the results of the data query into a temporary filename%SEQ%.tmp, along with the query results I add the real filename inside the document. I have a file listener that listens for the filename using wildcards filename*.tmp, it takes the file reads it in, pulls the permanent filename from the incoming document, and sets that filename in the header using the steps worked out above by selecting the filename into myvariable.
You cannot ( to my knowlege ) store variables in ESB so I found I had to put them inside the documents to move the data around. When I am all done with the work through the routing service I strip out the variable data fields that I needed to carry along with the data.
I hope this saves someone else a bit of frustration!
John -
Should I have Copies in 3 Folders - Data, Original & Modified?
I have a Powerbook G4 that is running out of Hard Disk space & I am looking for opportunities to find some space. I have not touched ANY of the files in the iPhotot Library, as I know that is a no-no, but it looks like I have copies of all pictures in 2 files: Original & Data. & then, for pictures I have modified, there are also copies of those in Modified. I understand the Original & Modified folders. But what about the Data folder? Should it be there? Do I need it?
I do have a back-up hard drive with copies of everything, but I still need to access my photos when I am not in the office, so simply moving them all to my back-up isn't a great option. I'm also wondering if I delete some photos from my Laptop after I back them up, when I do my next back-up will the photos I deleted from my laptop also be deleted off of my back-up copy?
Any thoughts or advice would be helpful.....I will get a new Mac Laptop in the Spring, but just trying to stretch my harddrive capacity a bit longer....
Thank You!!!
Powerbook G4 Mac OS X (10.4.8)Yes, everything is correct. The "Data" folder contains thumbnails rather than full-sized files.
First, back up by dragging (copying) the library folder AS AN ENTITY to the backup location. Do NOT attempt to back up portions.
Second, do all your deletions by accessing the library from INSIDE iPhoto. The backup will not be impacted.
Third, you might want to break your library into several DVD-sized libraries (this might take some educated guesses). I did it by duplicating my library several times and then carefully deleting appropriate photos from each one. Back them all up the normal way and also burn each one onto DVD and carry a pack of DVDs with you when you travel. With multiple libraries, you need to change the name of each library folder to something that makes sense to you (that's the ONE safe change that you can make to the library). iPhoto will always remember the most recent library that it accessed. Whenever you wish to change to a different library, hold down the Option/Alt key while starting iPhoto and follow directions.
Maybe you are looking for
-
Possible to change the business Partner from a created Contract in ICWEB??
Hello experts, I would like to know if it is posible to change the BP from a created contract in ICWEB. I check the option "CONTRACT MANAGMENT" and there is an option to change the premise with the button "Move To Other Premise" but I don't find an o
-
I ran into this huge massive bug in FP9.. Reproduction steps: 1. Goto Flash Download page. 2. Select version 9 for Linux. 3. Install This normally breaks down around step 2.
-
Table for Exchnage Rate Maintenance
Dear Experts, I am posting a Foreign Currency Document. The Foreign currency for me is Eur. In the Header of the document, I do mentioned Currency Eur with rate 70.55 the system then gives a message, rate 70.55 deviates @59% of the table rate 44.17 I
-
Create one invoice document for factory sales and third party sales
Hi All, I want to create one single invoice document for material sold from factory and from third party. I have checked the copy controls for order to billing but the system is still spliting the invoice. Please share your expertise.
-
Someone take my VISA!!! Sun JES strategy and SMB == need support.
Hello -- I'm a VERY small company -- seven seats -- looking to license JES Communications Suite. Big thing: need official Sun support because components of JES 2005Q4 REQUIRE (!!!!!) tech support -only patches in order to operate with stability (refe