Modify position description with job description

Hi ABAP gurus,
I'm new to ABAP programming and needs some directions from the gurus out there.
I need to update the HR position descriptions (fields STEXT, SHORT) in HRP1000 with the related job descriptions (fields STEXT, SHORT). What's the best way to do this? Are there function modules that can help me with this?
Regards,
Hanna

Thanks Amit for your response.
Yes this will be a one time bulk update. Do you know of any FM that can get the the related Job Description given a Position Number?
Best Regards,
Hanna

Similar Messages

Job and Position Descriptions in ESS

Hi all,
Does anyone know of a way of an employee accessing their Job and Position Descriptions from OM via ESS/MSS?
I can see that ESS is very usefull for dealing with the PA side of an employee, but find it hard to allow access to their own OM data.
Any tips or pointers on the subject would be greatly appreciated.
Kind Regards
John Anderson

Dear jmjakobsen,
We are implementing HR for a public Sector client, here we would like to use Positions as we are also implementing Purchasing. I am looking after the implementation of HRMS.Could you be able to help me on deciding on the Position KFF Structure.
We are using multiple segment position KFF.
My doubt is that if we use a multiple segment Position KFF, then what should be the Job KFF structure. Also, Our employees will be tagged at Departmental level and we are not capturing the multiple work-groups within the department.
How can we achieve the uniqueness of a position?
Will there be substantial work involved in creating unique Positions?
Thanks for the help, in advance
Sachin S.

How to Get the Job, Cost center, Position description using select query

Hi all,
How to get the Job, Cost center, Position description through select query without using the Function module?
thanks,
Prasad

use adhoq query and take the report chose both text and value

How can I solve the Error 110 problem when trying to modify the Description of Properties of PDF?

Hello!
I am trying to modify the Description of the PDF fies but I cannot do for some files because of the Error 110. How can I solve this problem so I can succesfully modify the Description of the Properties of the PDF files?
I also have one more question!
Why is it impossible to modify the Description parts when the File name is missing in the Description? There is a File name on each individual PDFs but some of them have to File names on the Description!
Thank you very much in advance!

Noelia, i have the same problem, did you solved it ?I had the same issue as Noelia when I investigated Noelia's issue originally (see the TwoVideos sample application in this thread: Re: How can I play different videos with only one MediaPlayer?
I tried running the TwoVideos sample application today on Windows XPsp3, JavaFX 2.1b17, JDK7u4ea and I was unable to reproduce the problem, so it is likely fixed either 2.1 or (less likely I believe) a Windows 7 only related issue.
http://www.oracle.com/technetwork/java/javafx/downloads/devpreview-1429449.html
If you can reproduce the issue with the latest developer preview, then log a bug at http://javafx-jira.kenai.com with environment details, steps, sample media and code to reproduce the issue.
Please contact me ainchilc at gmail dot com.If it is an answer to an unanswered question on a public forum, it is best to post the answer on the forum, then everybody who reads the forum will know what the answer is.

Account modifier keys description SVN

Hi Gurus,
Can any one tell me where to find account modifier keys description which are defined for GBB e.g SVN, SXN....etc.
Is there any table to find.
Thanks,
VMPatil

Go to OMWB and click on GL Accounts button. In the resulting screen, give your company code and execute. Here you can find GL account-wise mapping of OBYC with Account keys. You can find the Account Modifiers with description under GBB keys.
Find below the full list
- AUA: for order settlement
- AUF: for goods receipts for orders (without account assignment) and for order settlement if AUA is not maintained
- AUI: Subsequent adjustment of actual price from cost center directly to material (with account assignment)
- BSA: for initial entry of stock balances
- INV: for expenditure/income from inventory differences
- VAX: for goods issues for sales orders without account assignment object (the account is not a cost element)
- VAY: for goods issues for sales orders with account assignment object (account is a cost element)
- VBO: for consumption from stock of material provided to vendor
- VBR: for internal goods issues (for example, for cost center)
- VKA: for sales order account assignment (for example, for individual purchase order)
- VKP: for project account assignment (for example, for individual PO)
- VNG: for scrapping/destruction
- VQP: for sample withdrawals without account assignment
- VQY: for sample withdrawals with account assignment
- ZOB: for goods receipts without purchase orders (mvt type 501)
- ZOF: for goods receipts without production orders (mvt types 521 and 531)
Ravi.

How to modify position in the contract with BAPI_CUSTOMERCONTRACT_CHANGE

Hi experts,
I m facing a problem when i modify a contract with BAPI BAPI_CUSTOMERCONTRACT_CHANGE, indeed it adds new position for the same material instead of collecting its quantity, is there another BAPI to do so or should i copy this BAPI and modify it?
Thanks in advance.

Hi,
system details:
ST-PI:       2005_1_46B
ST-A/PI:     01G_R3_46B
SAP_NOTES:   46B
SAP_HR:      46B
SAP_BASIS:   46B
SAP_APPL:    46B
SAP_ABA:     46B
Content of LOGIC_SWITCH:
PRICING         KNPRS           CHAR    1
ATP_WRKMOD      ATP_WRKMOD      CHAR    1
SCHEDULING      CHAR1           CHAR    1
NOSTRUCTURE     XFELD           CHAR    1
Sergej

Where is par file of UWL ? I need to modify UWL description

Hello guys,
We have a egent requriement to modify the description of UWL .
e.g, "Tracking" change to "Sendbox(In Chinese)" , "Task " change to "Inbox(In Chinese)" .
And there are serval descriptions of buttons and dropdown list item need be customized .
I know that there should be a reference budle and related "Property" file for each language on the Portal server .
e.g , The reference budle of "Tracking" tabs is "tracking" .
The following link had point out it.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/7d/00a024b1ea48f2894aba81e9c304fe/frameset.htm
My problem is :
What is the exact path of UWL application package on Portal server ( It should be a par file on Portal server in general) ?
Which "Proper" file contain the description of "Task" and "Tracking " tabs ?
I had dowload all of the par file whicn contain "uwl" and "workflow" , but I can't find the right one.
Is there any suggestions ?
Thanks !
Best Regards,
Louis Chen

Hi Louis
You need to change the configuration file for this. Navigate to System Administration > System Configuration > Universal Worklist
Administration. Download the configuration file and do the customization. Also, check this doc for more help on how to do customization - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45?QuickLink=index&overridelayout=true
Regards,
Sen

How to modify infoset description

Dear all,
a simple question: how do I modify the description of an infoset? Thanks.
Jin Ming

Change Mode Infoset
Menu
GOTO
Global Properties
Change it here
Message was edited by:
Jr Roberto

"Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'.

I am using code fist migration and second time I run the service, I got this error.
"Modifying
a column with the 'Identity'pattern
is not supported. Column:
'CreatedAt'.
context.Cars.AddOrUpdate(c => c.Id,
new Car { Id = "60B0891B-C3CF-41A6-9BE0-BCCCE5949E6B", Image = "ic_highlander", Name = "Highlander", Description = "4 SEATER, FULL DAY (10 HRS), DOWNTOWN EXCLUDING INDUSTRIAL ZONE, WITH ENGLISH SPEAKING DRIVER", SeatingCapacity = 4, Luggage = 2, Rates = 20000.00M, AirportCode = "YGN" },
new Car { Id = "BAA205B5-C43F-490E-A83B-81F0EBDA2D97", Image = "ic_super_custom", Name = "Super Custom", Description = "4 SEATER, FULL DAY (10 HRS), DOWNTOWN EXCLUDING INDUSTRIAL ZONE, WITH ENGLISH SPEAKING DRIVER", SeatingCapacity = 4, Luggage = 2, Rates = 20000.00M, AirportCode = "YGN" },
new Car { Id = "DD68E56D-3967-4D32-A959-BEFBCB70FC4B", Image = "ic_mark_ii_grande", Name = "MarkII GRANDE", Description = "4 SEATER, FULL DAY (10 HRS), DOWNTOWN EXCLUDING INDUSTRIAL ZONE, WITH ENGLISH SPEAKING DRIVER", SeatingCapacity = 4, Luggage = 2, Rates = 20000.00M, AirportCode = "YGN" },
new Car { Id = "8EDDC308-FB63-469B-8A6A-B2360D61892D", Image = "ic_hiace_commuter_13", Name = "Hiace commuter", Description = "4 SEATER, FULL DAY (10 HRS), DOWNTOWN EXCLUDING INDUSTRIAL ZONE, WITH ENGLISH SPEAKING DRIVER", SeatingCapacity = 4, Luggage = 2, Rates = 20000.00M, AirportCode = "MDL" }

Hi,
Thanks for posting here.
We are looking into this and will update you with solution. Stay tuned for details
Girish Prajwl

My positive experience with FCPX.

In an effort to present the other side of the coin on this forum, that FCPX can work very well, here is my story.
For the last 8 years I've been using Final Cut Express on an older Macs. It worked fine for my various projects, although the incessant rendering would be very frustrating. (I never did find the proper format to prevent it.) When Final Cut Pro X was released, I read about it's shortcomings, so I passed.
Five months ago I was planning to video my nephew's wedding so I looked closely at Final Cut Pro X, but was very daunted by how completely different it was from FCE. A few days later I was in my local Apple Store asking their video expert about the rendering in FCE, basically he said to get FCPX, which not only handles many formats, but renders in the background when needed, and has a lot more features than FCE.
I went home and looked at my first FCPX tutorial online and thought, OK, it looks like I'm going to have to start from scratch to learn it. My MacBook Pro was going on 6 years old, so I also decided to buy a new one that could handle FCPX. I had to stay on Snow Leopard OS 10.6.8 for one vitally important application that was not being upgraded, so I went to the Apple refurb site and found a 17" 2.2Ghz i7 late 2011 that fit the bill (I wanted the ExpressCard slot), marked down from $2600 to $1900, I grabbed it.
I immediately installed 16 GB of RAM, and replaced the internal drive with the one in my old laptop, a fairly new Seagate XT Hybrid 750 GB/16 GB HD/SSD. I then bought FCPX. (After completing one small project, I actually replaced the 750 hybrid with an OWC 960 GB dual platter RAID 0 internal SSD, wow, is it fast. I work my current project there, then when complete, move it to the 750 hybrid or a 3 TB I put in a Seagate GoFlex Thunderbolt adapter .)
I have to admit that it took me a couple of days to let go of FCE and get used to the FCPX Events/Projects system, but I got through it. I did look at tutorials, but actually learned far more by exploring the menus, panes and icons, experimenting, trial and error, and reading this forum.
I finished the wedding video (32 minutes long) in about a week (learning as I went). It was shot with one camera, which forced me to do some creative editing by lifting, moving and zooming various pieces (and cutting around a very oblivious professional photographer), which gave me a multi-camera look. I added a title, transitions, adjusted dark scenes, leveled the audio in many places, diminished airplane and wind noise, and dropped in a sound effect of my nephew breaking a glass under foot (which did not actually break at the time).
I shared the wedding video to my AppleTV2, and to DVD (3 copies), and to YouTube, without any overt problems. Yes, each operation had it's learning curve, but I accomplished them all in a rather short time. The first time I uploaded it to YouTube, it took about 8 hours for a 1080 2.8 GB version, but when it was done, the YouTube site had a message that it was too long, I had to register to have longer than 15 minute videos. I then used FCPX to upload a 720 version (the actual original format), 985MB, which took about 2 hours (even with a 1 mbps upload internet service). It looks great via the YouTube app on my AppleTV2.
The only overt problem I have is a crash once in awhile either at launch or very shortly after, but I delete the prefs and continue on. I also installed some free plugins that seemed to cause some crashing, so I removed them, but the next time I opened the wedding project, I had all kinds of warning triangles. Turned out I used some of the plugins and FCPX warned that they were missing. It took a few minutes of searching this forum to learn how to get rid of those effects, I didn't even have to ask anyone.
I just bought two new 1080p AVCHD video cameras and really look forward to using them for a festival on Sunday where I'm playing with a ukulele orchestra (which I also took up a few months ago). I'm going to tackle the multicam operations with that project (something I did in my own way with FCE, even though it did not actually have that function).
My view of many of the posts on this forum is that either they have a system/hardware problem outside of FCPX, or they do not make enough of an effort to learn and understand FCPX. It takes diligence and patience, which in my experience, really does pay off. I used to dread doing tweaks in FCE, now I look forward to it in FCPX.

I'd just like to add my positive-ness with FCPX! I've used it from 10.0.1 and, since 0.3, I have loved it and raved about it when anyone asks. The multicam feature is amazing! I used to use Vegas MS for some casual editing and the biggest annoyance with FCPX at the start was the magnetic timeline but after a day or so I got used to it and now can't imagine using anything else. I've had the odd crash but they are few and far between. I won't say I haven't sworn at it a few times but the fault is usually mine in the end!
I use an upgraded 2012 MacBook Pro with 16GB memory and a Seagate Hybrid XT disc for my more "beefy" projects but I've found my 2011 MacBook Air works great with smaller projects (4GB RAM and 256GB SSD). Interesting article on fcp.co about MBAs and FCPX if anyone is considering purchasing one.
I tend to learn things as I go along; I know what I want to achieve and then work out how to get there, often with the help of the nice people in this forum . With FCPX, once you understand the basic structure it's not too difficult.
It seems one of the common themes is problems with importing AVCHD / MTS files. Since 0.3 I've never had any problems as long as I follow my basic rules -
Format the SD card in the camera just before use (use "low level" if offered for the first format) and shoot your footage. Use the same quality format on that card throughout the shoot.
Remove the card and plug it into the computer's card reader. Do NOT interfere with or modify the files in Finder in any way!
In FCPX create an archive from the card on a separate external disc. (If the card doesn't show up then try another card reader - there can be differences in USB chipset implementations).
Import to the events from the archive. Once done, repeat from 1.
Phil

How to display positive value with a trailing plus sign

I want to display positive value with a trailing plus sign and negative value with a trailing minus sign. How can I do it? Is there any character in custom format for this? I don't want to convert number to text and use case statement because I need two decimal places and thousands separator.

Okay, try this...
You will need to do a "UNION ALL" of three queries, one for positive values, one for zero values, and one for negative values.
In the "negative values" query, do the following:
1) Add a filter on the measure for values "less than 0"
(This will ensure all values are negative.)
2) In the Data Format tab, select "Custom" and type in #,##0.00-
(This will add the trailing negative sign.)
3) In the Edit Formula tab, add the absolute value function, ABS(insert measure here)
(This will take get rid of the default leading negative sign.)
For the "positive values" query, modify the above as follows:
1) Change the filter to "greater than 0"
2) In the Data format, change the custom format to #,##0.00+
Step 3 is not needed since all values are positive.
For the "zero values" query, just add a filter "equal to zero."

How to fix "Modifying a column with the 'Identity' pattern is not supported"

When doing Code First Migrations my mobile service always errors in the seed method with: 'Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Methodology' for the CreatedAt column. All my
models inherit from EntityData.
// Sample model
using System;
using System.Collections.Generic;
using System.ComponentModel.DataAnnotations;
using Microsoft.WindowsAzure.Mobile.Service;
namespace sbp_ctService.Models
public class Methodology : EntityData
public Methodology()
this.Scenarioes = new List<Scenario>();
public string Id { get; set; }
[Required]
[StringLength(50)]
public string EntryMethod { get; set; }
[Required]
[StringLength(50)]
public string TestDirection { get; set; }
[Required]
[StringLength(50)]
public string PassCriteria { get; set; }
[Required]
[StringLength(50)]
public string Dependency { get; set; }
public bool ExtraInfo { get; set; }
public virtual ICollection<Scenario> Scenarioes { get; set; }
And in my Configuration.cs file during an update here's my seed method:
protected override void Seed(sbp_ctService.Models.sbp_ctContext context)
// This method will be called after migrating to the latest version.
context.Methodologies.AddOrUpdate(
m => m.Id,
new Methodology { Id = "Methodology1", EntryMethod = "P/F", PassCriteria = "P/F", Dependency = "None", ExtraInfo = false, TestDirection = "Round" },
new Methodology { Id = "Methodology2", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "Round" },
new Methodology { Id = "Methodology3", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "In/Out" },
new Methodology { Id = "Methodology4", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "Out" }
For some reason on an update the CreatedAt field is created and given a value of null. So of course on an insert/update it will error because CreatedAt is an Identity field.
I've tried to configure the modelBuilder in my context to tell it that CreatedAt is an identity field, but that still doesn't work.
modelBuilder.Entity<Methodology>()
.Property(m => m.CreatedAt)
.HasDatabaseGeneratedOption(DatabaseGeneratedOption.Identity);
So far the only way to fix this is by commenting out my Seed data, but it's not a fix. I've seen other solutions where you can force it to not serialize certain fields, but I don't know if those solutions apply.

So I think this occurs because you might have created the database (Code-first) with POCOs that didn't have the CreatedAt field in them. I think that's what I did and the easiest way to fix it for me was to delete my database and re-create it with my POCOs
inheriting from Entity Data from the very beginning. We were still in development so it worked out for us but I know some people might not be able to do that. Here's what my table looks like after it was created correctly:
USE [database_name]
GO
/****** Object: Table [sbp_ct].[Methodologies] Script Date: 2/24/2015 9:48:45 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [schema_name].[Methodologies] (
[Id] NVARCHAR (128) NOT NULL,
[EntryMethod] NVARCHAR (50) NOT NULL,
[TestDirection] NVARCHAR (50) NOT NULL,
[PassCriteria] NVARCHAR (50) NOT NULL,
[Dependency] NVARCHAR (50) NOT NULL,
[ExtraInfo] BIT NOT NULL,
[Version] ROWVERSION NOT NULL,
[CreatedAt] DATETIMEOFFSET (7) NULL,
[UpdatedAt] DATETIMEOFFSET (7) NULL,
[Deleted] BIT NOT NULL,
[Name] NVARCHAR (MAX) NULL
GO
CREATE CLUSTERED INDEX [IX_CreatedAt]
ON [schema_name].[Methodologies]([CreatedAt] ASC);
GO
ALTER TABLE [schema_name].[Methodologies]
ADD CONSTRAINT [PK_schema_name.Methodologies] PRIMARY KEY NONCLUSTERED ([Id] ASC);
Does yours look something like that?

Error in CodeFirst Seed with migrations : Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'.

Hi,
I have activated migrations on my Azure Mobile Services project. I filled the new seed function Inside the Configuration.cs class of the migrations. If the tables are empty, the seed function is going without any problems. When my AddorUpdate tries to update
the first object I get the error in the inner exception : "Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'."
Part of my code is as follows:
context.categories.AddOrUpdate(
new Category { Id="1", Code="GEN", Text="General"},
new Category { Id="2", Code="POL", Text="Politics"},
new Category { Id="3", Code="FAS", Text="Fashion"},
new Category { Id="4", Code="PEO", Text="People"},
new Category { Id="5", Code="TEC", Text="Technology"},
new Category { Id="6", Code="SPO", Text="Sport"},
new Category { Id="7", Code="LIV", Text="Living"}
Any help is welcomed. Thanks.
Faical SAID Highwave Creations

This occurred to me because I changed my POCO models to inherit from EntityData after I had already created my database without the extra Azure Mobile Service properties (UpdatedAt, CreatedAt, Deleted). The only way I fixed it was to drop the database and
start over with my classes inheriting from EntityData from the beginning. If you can't do that then I would create a new table with EntityData models and see how that database is created and manually update your tables to match those. Here's an image of one
of my tables from the management console on Azure. You can see that CreatedAt is an index.

Getting the error access denied trying to modify the workbook with identifier in Disocverer Admin

Hi All,
I have exported a workbook created by business user as an .eex file logging in as discoverer admin from a Production enviornment (transactional databse) and trying to import it to a different environment called reporting environment ( non transactional databse) and getting a warning 'WFS GTP REPORT SINAPORE.eex:Access denied trying to modify the workbook with identifier 'WFS_GTP_REPORT_SINGAPORE'.
It says Files Partially Imported so clicked on Finish to complete the import.
The report has been imported under the user account but the sharing to the different responsibilities/Users has not been imported. I need to import the report with the sharing of the responsibilities/users as well.
I do not have an option login into discoverer administratore using the user account, i can only login using the administator account ( i know loging in as the business user it self will allow you to import the sharing). But our DBA's oppse this is a security threat for the users as you are logging in as the user in production environment.
Please help with this issue.

I have the same problem, and I figured out that my windows is installed in french, and every users groups are created in french also, groups like Everyone don't exists and i can't change by console.
Regards, Roberto Borges please remember to mark the replies as answers if they help and unmark them if they provide no help.

Region position 2 with 2 parts.

hello
My pages are made like this :
Menu region in region position 01
Body pages in region position 02
Now, in the body pages : there is some pages in witch the content ca be organized in two parts (in each part I can have a report).
I know that I can not have a region within another region...
How can I manage this type of pages/regions.
thanks!
Marie.

Use 2 or more regions in Display Point Region Position 02, with different region templates as necessary to display titles, buttons etc.
e.g. Region with items at sequence 10; region with report at sequence 20, using region template Region without Title or No Region so it appears seamless with the first region.

Modify position description with job description

Similar Messages

Maybe you are looking for