Modify the text in the file

Hi,
I have a text file with few lines. Please let me know hot to modify the text in in the line.
for example if my file contains :
this is line 1.
this is line two.
this is line 3.
now i want to replace 1 by one and 3 by three.
this is a simple example but my requirement is some other .
I tried opening the file reading the strings and comparing and changing and writting it to new file.
is there any way to directly open the file and modify without using the second file to be created.
Thanks in advance,
pavan

the actual problem is there is a file in following kind of entry in each line
<string>, starting point, ending point.
eg. "this is a file" , 10, 20.
now i want to calculate the length of the string and add to starting point and check with ending point if it is false then update the ending point with actual value.

Similar Messages

How do I correct the text in a file made by another person

I have a file made by a friend as a jpeg file whidh I have imported in photoshop 5. I would like to make some changes in the text in the file. How do I do it/

Paint over the existing text to obliterate it and create new text over it.
The text in a JPEG is rasterized and non-editable.
Ask your friend for a layered TIFF or PSD file in which the text is still in vector form on its own editable layer.

Problems with showing all the text in pdf file

Hi All,
I have this problem. When I upload a pdf file to our company website as a link and then when I open it from the link, most of the text in the file is like symbols. The pdf file is a brochure and is exported from CorelDraw. The brochure consists of photos and text. For me is very important t solve the problem, because most of our customers use Mozilla firefox and they must be able to see everything on the brochure.
Thank you in advance.
Best wishes,
Martina

hello again, yes the development version of the pdf viewer addon is a early snapshot of what will go into future firefox versions. so when the rendering issue isn't apparent in the dev version of the pdf viewer, this means that no bug has to be filed and the fix is already on its way to get into one of the next firefox updates.
i cannot give you an exact date on when your issue will be going to be solved in firefox, because without an actual pdf sample its not possible to know which bug has caused your issue. however according to the pdf.js developers a fix that is already present in the current developer version will at least make it into firefox 29 (scheduled for the end of april).
you could test yourself if the issue is still present in firefox 28 (beta) or firefox 29 (aurora): https://www.mozilla.org/firefox/channel/

TS3276 Hi. Just started using Mac Mail on a macbookpro v10.6.8. I tried to send a message with two excel (for mac) files attached. One attached as a file, one inserted all the text into the message body. Help?

Just started using my Mac Mail program instead of web mail. When I went to attach two pdf files, one attached as a file, the other inserted all the text into the body of the email message. How do I get it to attach both pdf's as files?

I think you're confusing two different things. If you attached PDF files and one of them displayed the PDF icon in the message window, that means it was more than one page. If you saw what appeared to be the actual document for the other PDF file, that means it's only one page and it's normal for it to display that way.
However, I seem to recall there may (or should) be a button at the bottom-right of the message window that allows you to display those files as icons, even if they're one page. If not, there's a third-party addition you can use to add that feature:
http://lokiware.info/Attachment-Tamer

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

P.S. Site is http://www.coldwatercreek.com

Read the text in pdf file

Dear all,
I have checked a lot of post about reading pdf in this forum. However, is it possible to read the text in pdf file. In my case, I need to read the content of pdf to do further process. Could anybody give me some suggestions. Thank you.

I have a similar problem, can anybody help us....

Fetch unread RSS items from mail, set them to read, save the text to a file

This is what I want to do, and needless to say I am having a little trouble.
I wish to take the unread mail RSS items, set them to read, and then save the TEXT of the articles (not the title, time, or author) to a TextEdit file in my Documents folder.
So far I have Get Feeds From Mail > Filter Articles > Get Text from Articles > New Text File
This is all fine and dandy, but how do I just get the TEXT and not all of the crap that comes with it?
Thanks!

NOw I had manage to clear out the error, but now the problem is when I click on the 'save' button, this function clear out the entire text file for me !!!
The code are as below:
       if(e.getSource()== vButtons[0])
          try{
           String str;
           String Ky = tArea.getText();
           BufferedWriter buffWrite=null;
           BufferedWriter in1 = new BufferedWriter(new FileWriter("Keyword.txt"));
                    buffWrite.write(Ky);
                buffWrite.flush();
                    buffWrite.close();
                in1.close();
          catch (IOException ex) {
          ex.printStackTrace();
        if(e.getSource()== vButtons[1])
              new panel();
              dispose();
         if(e.getSource()== vButtons[2])
            System.exit(0);
    }     Please tell me how to save the TextArea to the text file, THANKS !!!

Load the text from a file to JTextField, I need help badly

Can anybody help me, I try to load the text from a file to JTextField,
it compiled but it does not run
here the message i get:
----jGRASP exec: java buttonAction
----at: Sep 11, 2007 6:27:09 PM
----jGRASP wedge: pid for wedge is 3104.
----JGRASP wedge2: pid for wedge2 is 216.
----JGRASP wedge2: CLASSPATH is ".;;.;D:\Program Files\QuickTime\QTSystem\QTJava.zip;D:\Program Files\jGRASP\extensions\classes".
----jGRASP wedge2: working directory is [L:\Documents\GUI Pro] platform id is 2.
----jGRASP wedge2: actual command sent ["D:\Program Files\Java\jdk1.5.0_01\bin\java.exe" buttonAction].
----JGRASP wedge2: pid for process is 1440.
Exception in thread "main" java.lang.NullPointerException
     at buttonAction.loadData(buttonAction.java:122)
     at buttonAction.<init>(buttonAction.java:31)
     at buttonAction.main(buttonAction.java:163)
----jGRASP wedge2: exit code for process is 1.
----jGRASP: operation complete.
private void loadData()
         try
            FileReader fr = new FileReader("myData.txt");
            BufferedReader br = new BufferedReader(fr);
            br.readLine();
            while(br != null)
               name.setText(br.toString());
             catch (IOException e){}
      }

See this demo:
import java.io.*;
import javax.swing.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import java.awt.FlowLayout;
public class TextFieldTest extends JFrame {
     private JLabel fieldLabel;
     private JTextField field;
     private JButton loadTextBtn;
     public TextFieldTest() {
          initComponents();
     private void initComponents() {
          fieldLabel = new JLabel();
          field = new JTextField(30);
          loadTextBtn = new JButton("Load Text");
          this.getContentPane().setLayout(new FlowLayout());
          this.getContentPane().add(fieldLabel);
          this.getContentPane().add(field);
          this.getContentPane().add(loadTextBtn);
          this.pack();
          this.setLocationRelativeTo(null);
          this.setTitle("TextFieldDemo");
          this.setDefaultCloseOperation(EXIT_ON_CLOSE);
          loadTextBtn.addActionListener(new ActionListener() {
               public void actionPerformed(ActionEvent evt) {
                    loadText();
     private void loadText() {
          try {
               BufferedReader br = new BufferedReader(new InputStreamReader(new FileInputStream("test.txt")));
               String label = br.readLine();
               String data = br.readLine();
               br.close();
               fieldLabel.setText(label);
               field.setText(data);
          } catch (Throwable t) { t.printStackTrace(); }
     public static void main(String[] argv) {
          SwingUtilities.invokeLater(new Runnable() {
               public void run() {
                    new TextFieldTest().setVisible(true);
}The contents of test.txt are as follows:
this is the label
the data for the field goes here

In popup step how do I get the "text on the button" in the report rather than button index?

(1)
How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
OUT PUT IS 30?" button hit.
(2)
In popup step how do I get the "text on the button" in the report rather than button index?
File attached
Attachments:
test_stand.zip ‏32 KB

The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
The easiest is to use the reporttext.
In a post expression, you can use something like
Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
Just my 2cents
S.
// it takes almost no time to rate an answer
Attachments:
IncludeButtonTextInReport2_0.seq ‏18 KB

I'm using Acrobat Pro 11. When printing an email to PDF most of the time it cuts off the text on the right margin. Setting look OK and I've moved things around on the email, but that doesn't seem to make any difference. Is there an Adobe setting I'm missi

Like I said above, print to Adobe pdf and it wants to cut off the text on the right margin. I can't see to find a setting that changes this. Any ideas??

OK, so I have now found that this is apparently normal for iTunes, to only accept mpeg 4 movie files, all the searching I did before I must have worded it wrong because I couldn't find anything about this, incredibly. Had been looking for why iTunes won't take all the files it previously did, like if it had been changed, and it hasn't, it's allegedly always taken only mpeg 4 files. Also I had been searching for why iTunes crashes every time I try and add/import anything but mpeg 4 files, and even sometimes with mpeg 4 files. That isn't normal, it's supposed to just do nothing apparently as I've just found out. So for these reasons I didn't find the answer despite my searching all over the web.
So I guess that answers my own question now, but I'm still perplexed as to why I absolutely, definitely, without any doubt, had several hundred movies of a few different video file types loaded, accessible and playable in my iTunes library that everything here claims iTunes never accepted. It apparently shouldn't have been possible for me to have done this, but for probably 10 years it's been this way.
Perhaps since I don't remember adding these files to iTunes anymore recently than maybe 6 or 7 years ago, the iTunes back then did accept all kinds of file types? Or could I have somehow had some video codecs or software that expanded the capability of my movie players like Quicktime Player that unwittingly also allowed iTunes to take those files as well? All I know is somehow it worked! So now my question is how did I have it working before, so that maybe I can make it work again.

How to clear the text in the Text Editor

Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
Madhavi

Hello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text     TYPE TABLE OF as4text
                     WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text     TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab    TYPE STANDARD TABLE OF ty_s_outtab
                      WITH DEFAULT KEY.
DATA: gt_outtab       TYPE ty_t_outtab,
      gs_outtab       TYPE ty_s_outtab.
DATA: gd_language     TYPE spras.
DATA: go_docking      TYPE REF TO cl_gui_docking_container,
      go_textedit     TYPE REF TO cl_gui_textedit.
DATA: gd_okcode       TYPE ui_func,
      gd_repid        TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
    EXPORTING
      repid                       = gd_repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc NE 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
"       ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
    WHEN 'BACK' OR
         'EXIT' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'LANGU=DE' OR
         'LANGU=EN' OR
         'LANGU=FR'.
      PERFORM get_text_editor.
      SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
      PERFORM set_text_editor.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form FILL_TEXTS
*       text
* --> p1        text
* <-- p2        text
FORM fill_texts .
* define local data
DATA: ld_string   TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM.                    " FILL_TEXTS
*&      Form INIT_CONTROLS
*       text
* --> p1        text
* <-- p2        text
FORM init_controls .
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
*      repid                       =
*      dynnr                       =
*      side                        = dock_at_left
*      extension                   = 50
*      style                       =
*      lifetime                    = lifetime_default
*      caption                     =
*      metric                      = 0
      ratio                       = 90
*      no_autodef_progid_dynnr     =
*      name                        =
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
    EXPORTING
*      max_number_chars       =
*      style                  = 0
*      wordwrap_mode          = wordwrap_at_windowborder
*      wordwrap_position      = -1
*      wordwrap_to_linebreak_mode = false
*      filedrop_mode          = dropfile_event_off
      parent                 = go_docking
*      lifetime               =
*      name                   =
    EXCEPTIONS
      error_cntl_create      = 1
      error_cntl_init        = 2
      error_cntl_link        = 3
      error_dp_create        = 4
      gui_type_not_supported = 5
      OTHERS                 = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " INIT_CONTROLS
*&      Form SET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
       WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
    EXPORTING
      text            = gs_outtab-text
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " SET_TEXT_EDITOR
*&      Form GET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
    EXPORTING
      only_when_modified     = cl_gui_textedit=>true
    IMPORTING
      text                   = gs_outtab-text
*      is_modified            =
    EXCEPTIONS
      error_dp               = 1
      error_cntl_call_method = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
    TRANSPORTING text
    WHERE ( language = gd_language ).
ENDFORM.                    " GET_TEXT_EDITOR
Regards
Uwe

How do I left justify the text in the tabs of a JTabbedPane.

In 1.3.1 this used to work by supplying an HTML string with <div align="left"> but when I run with 1.4.1 this is now broken and I get center justification.
Does anybody know a way to get the text in the tabs to be left justified.
Thanks,
Philip

First, I found while using JTabbedPane that the "standard" behavior is to allow to a tab the exact space needed to display the tab text. Hence with this behavior, there is actualy no difference of "left" or "center" aligned text. So I assumed that you found a way or another to make your tabs wider than the "string width"...
Here is a solution:
You can override the TabbedPaneUI class and ajust the "layoutLabel()" method. Here is the code..
//Your code using the tabbedPane
JTabbedPane tp = new JTabbedPane();
tp.setUI(new LeftTabbedPaneUI());
//File containing the overrided TabbedPaneUI
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.text.View;
class LeftTabbedPaneUI extends javax.swing.plaf.metal.MetalTabbedPaneUI {
        //I also overrided this function just to force tabs wider than
        //the displayed "String Width". I asume that you found another
        //way to do this so you can delete this function in your
        //implementation
     protected int calculateTabWidth(int tabPlacement, int tabIndex, FontMetrics metrics){
          return 150;
    protected void layoutLabel(int tabPlacement,
                               FontMetrics metrics, int tabIndex,
                               String title, Icon icon,
                               Rectangle tabRect, Rectangle iconRect,
                               Rectangle textRect, boolean isSelected ) {
        textRect.x = textRect.y = iconRect.x = iconRect.y = 0;
     View v = getTextViewForTab(tabIndex);
     if (v != null) {
         tabPane.putClientProperty("html", v);
     //This Line is added to avoid writing on tab border while aligned to left.
     //You can comment this line to test and or adjust the "5" pixel space
     Rectangle rec = new Rectangle(tabRect.x+5,tabRect.y,tabRect.width,tabRect.height);
        SwingUtilities.layoutCompoundLabel((JComponent) tabPane,
                                           metrics, title, icon,
                                           SwingUtilities.CENTER,
                                           SwingUtilities.LEFT,
                                           SwingUtilities.CENTER,
                                           SwingUtilities.TRAILING,
                                           rec,
                                           iconRect,
                                           textRect,
                                           textIconGap);
     tabPane.putClientProperty("html", null);
     int xNudge = getTabLabelShiftX(tabPlacement, tabIndex, isSelected);
     int yNudge = getTabLabelShiftY(tabPlacement, tabIndex, isSelected);
     iconRect.x += xNudge;
     iconRect.y += yNudge;
     textRect.x += xNudge;
     textRect.y += yNudge;
}Here I overrided the "Metal" implementation of the tab but you must override the implementation of the used Look And Feel,
ex. "com.sun.java.swing.plaf.window.WindowsTabbedPaneUI" for the windows LAF.

I DON'T want attachments to show in the text of the Mail email

I DON'T want attachments to show in the text of the email.
My company just switched over to Mail today. Every time we send an email with a .pdf attachment, it shows the attachment in the text body of the email. We don't want that to happen. How do I prevent this from happening?
Mac Mini Mac OS X (10.4.8) Mail 2.1.1

You can't.
The Mail.app displays all image/photo and single page PDF attachments inline or viewed in place within the body of the message by default - sending and receiving.
You can control-click on a viewed in place attachment and select View as Icon but the icon for the attached file will remain in the body of the message. Regardless, depending on the recipient's email client and available preference settings, such attachments may appear inline or viewed in place when the message is opened by the recipient (as with the Mail.app when receiving such attachments) or as attached files only which must be opened separately to be viewed for which the sender has no control over.
This was a minor adjustment for me at first but I now prefer such attachments being displayed inline since I have confirmation that I selected the correct file or file names as attachments before the message is sent.

Is there any way to change the font size of the text in the Finder Sidebar?

This may sound like a bit of a dorky question but here goes nothing...
I am rather near-sighted and in need of new glasses but I am stuck in a holding pattern until I can get a referral to see my eye doctor. Anyway... I have found myself using the Zoom features far more often and increasing the font size in the Finder for the Item Names & Info.
The problem that I am facing now, is that the font size of the text in the sidebar is FAR SMALLER than the font size of the text of the actual file names & info.
+*IS THERE ANY WAY TO INCREASE THE FONT SIZE OF THE TEXT IN THE SIDEBAR??*+
So far I have looked in:
*The Finder Preferences
*The Desktop Preference Pane
*The Appearance Preference Pane
*The Seeing Tab of the Universal Access Preference Pane
And to add to my frustration I have also searched the Mac OS X Help AND all of the posts in this thread (back to 1/1/09) that had the word "sidebar" mentioned in them!!
+*DOES ANYBODY HAVE ANY OTHER IDEAS?? OR IS THIS ONE AREA THAT I AM OUT OF LUCK BECAUSE APPLE DIDN'T FORESEE THIS ISSUE??*+
Usually, Apple is really very good about foreseeing any possible trouble (ESPECIALLY when it comes to the area of Accessibility for people w/ disabilities!!)
I do hope that SOMEBODY can help me on this one!!
Also, I noticed that the size of the text that is on the Toolbar is also the same ITSY BITSY font size as the text on the sidebar, but I am guessing that there is next to nothing that can be done about that!!
Thanks a Million!!
+~Kathryn A.+
P.S. Here is the link to a screenshot that I took that will illustrate my problem more clearly...
Icon View Screenshot: http://screencast.com/t/gzDONwN3

Hi! The only way I know of is changing the screen resolution. Tom

Float is not working? I need the text to the right of the image but my CSS isn't working. Help pls

Hi,
I am having some unusual difficulty getting my images to float left/right in order to have the text beside the image. In the image I provided, the red arrow is where I'd like the text to be but no matter what I put in the CSS file, the text begins to the lower right of the image floated left. Can anyone help me figure out what is going on? The code for the HTML is located here http://codeviewer.org/view/code:1f51 The code for the CSS is here: http://codeviewer.org/view/code:1f52
I am using the CSS code from a website I designed that works fine in that website. Why isn't it working here? The image name is "fundraiser.jpg"
Thanks for your help!

Problem is due to you not declaring the correct instructions for the class .float-left css selector:
Change this:
.float-left {
margin: 5px 10px 0 0;
To this:
.float-left {
float: left;
margin: 5px 10px 0 0;

Configuration to copt the text to the Payment document (F110)

Dear All,
Could you pls let me know the configuration/process to copy the text to the payment document while we run automatic payment program (F110) from Invoice.
<b>Scenario</b>
We had many open Invoices to make payment. while i have executed F110 payment documents are posted. But no text to those payment documents (F110). So i willrequire to configure in such a way that the system will automatically copy the taxt to the payment document from the Invoice.
Pls help me to do so.
Thank you
Gopi

Hi Gopi,
The information you get in the payment file is dependend by country (the program that create the file).
In SAP you hav the "old" payment programs and the work branche. In the first one you are dependend form the program and in the wok branche you define what you want.
Normal the information in the payment file is the reference field from the document header or the text on line when that start with an * (in this situation you set in the vendor, indv payment).
In customizing (payment program) you say how many items can be payd on the line item. The max is the space you have in the payment file to fill in the text (in our case 7 invoices).
Then you have the option create more payment lines (11 invoices is to payment lines in the file) or to create a payment advice that you have to sent to you vendor
Paul

Modify the text in the file

Similar Messages

Maybe you are looking for