Modifying Form Generator code groups

Does anyone know if it is possible to override the code that the forms generator uses for generated code groups (eg CGCD$QRY_SERVER_VER) at one single place instead of overriding the event code segments for every Forms Module in the Design Editor.
Kind regards Gerrit Bouhuis.

Hi Mandy,
I'm not sure what you mean bij 'form generator code groups'. Do you perhaps mean the logic definitions that appear when you add an event to a form? (Module definition -> application logic -> events -> create event)
Kind regards,
Ronald

Similar Messages

Modify system generated code

Hi,
Whenever we create an Ztable a program is generated by system.i want to know whether we can modify that program? IF YES how to do it?
Rewadrs for sure,
Prajith

Hi,
U <b>can not change</b> the system generated code.
Try any <b>User Exit or BADI</b> available for the same it might help u.
Regards,
Ranjit Thakur.
<b>Please Mark The Helpful Answer.</b>

How do I use infopath 2013 with visual studio 2013 to modify forms with code?

Dear all,
I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I wonder how
do I get rid of the message and start coding? Can someone provide a detailed procedure of doing so? I am having trouble with creating multiple items with single infopath form with repeating table on sharepoint online. Thanks.
Timothy

Hi,
According to your post, my understanding is that you want to create InfoPath form with code using Visual Studio.
More information about develop InfoPath form with Visual Studio:
http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/aa942693.aspx
For the second question, I suggest you can create another post , it will be easier for others to focus on one question in one thread.
Best regards

Need advise with pdf form generator code?

I hava a PdfFormGenerator.java file that takes a pdf document
loops throught all the fields and creates a class file and converts
the fieldnames into something java can use in a method name,. basically
sets all the set and get method.
I have specified the location of my pdf form and the location of my java code. However when run the PdfFormGenerator.java file in command prompt, I keep getting the following msg:
Exception in thread "main" java.lang.NoClassDefFoundError: com/lowagie/text/pdf/PdfReader
Any ideas how I can get this to work. Thanks
Here is the code:
package project.student;
import java.io.*;
import java.util.*;
import com.lowagie.text.pdf.*;
public class PdfFormGenerator {
    private String className;
    private String formName;
    private StringBuffer generatedClass = new StringBuffer();
        private String classLocation = "D:/Projects/student/code/";
        private String formLocation = "C:/student/admin/forms/";
     public static void main(String[] args){
        try{
            PdfFormGenerator gen = new PdfFormGenerator(args[0], args[1]);
            gen.writeToFiles();
        }catch(Exception ex){
             System.out.println("PdfFormGenerator : " + ex.getMessage());
            ex.printStackTrace();
}Edited by: zub786 on Jan 22, 2008 4:34 AM

You have to include the jar file containing the Iowagie classes in your classpath.

UML modeling for class diagrams, could not generate code for modified diagr

Hi,
I'm using Java studio Enterprise for creating class diagrams and generating code from the UML using round trip engineering. I'm able to create class diagrams and generate code from the diagram. I tried modifying java code for classes and saved it. Now if I try and modify the diagram its not updating the java code associated with it.
Please suggest the workaround or so.
Thanks
Sunita

Maybe the linkage between the source and model class element is broken. Try to expand the class element from the project tree to see if a source file artifact node (under the class that displays the pathname as the name of the node). If not, that's why. Then, the workaround is to manually add the pathname to the java source file. Here are the steps:
- expand the class in question
- select the source file artifact node
- from the properties window on the right side of the ide, enter the exact pathname to the java source file and press the Enter
It should work now.

Creating a modifiable form field

Hi,
I would like to create a modifiable form field that maps onto a directory server multi-valued field. This field should have the ability to add a value or remove a value as well as displaying the contents of the list. I've spent time reviewing the Workflows, Forms and Views (v8) document but it's not clear how to achieve this sort of field. Is it possible?
Regds
CK

The ListEditor component is what you are looking for.
Check out this code snippet directly from the documentation:
<Field name='accounts[Sim1].Group'>
<Display class='ListEditor' action='true'>
    <Property name='listTitle' value='stuff'/>
    <Property name='allowTextEntry'>
      <Boolean>true</Boolean>
    </Property>
    <Property name='ordered'>
      <Boolean>true</Boolean>
    </Property>
</Display>
<Expansion>
     <ref>accounts[Sim1].Group</ref>
</Expansion>
</Field>The important stuff in this case is the field name, in this case accounts[Sim1].Group. This means you are displaying/modifying the contents of an attribute "Group" on resource "Sim1". Change this to suit your needs.

Designer 6i gives Forms Generator warnings

Hi,
We have recently upgraded to Designer 6i from
Designer 6.0. Some of our user modified code is not generated and I'm getting the following warning from the Forms Generator:
Message
CDG-00036: Module KN_HURTIGREG: User modified logic ignored, generatable code not generated
I would very much like to know which user
modified code is being ignored. Is there a way to find out? Since the code generated from 6i differs a good deal from the code
from 6.0 it is not easy to find out manually.
Double clicking the message in the message window does not take me to piece of code that
is missing (as one could expect).
Thanks,
Haakon

Name in database is not used in the generateg code, e.g. Validation Trigger!*BTW, what is your Validation Trigger? Its text, please.
Why do you expect the name in the trigger?
Ummm... Well, the Oracle Designer Online Help states on the subject:
Name in Database:Optional, 100 characters
The name to be used by Generators instead of the table/view/materialized view name within the FROM clause of generated queries. This name is used without any user/schema prefix, regardless of preference settings (TABOWN). A suggestion list displays the Global Synonym Names for all implementations of the relation but free-format text may also be entered here.
These Generators use this property. Click for more information:
Form Web VB>
So the Name in Database is supposed to be used in queries only.
But you should see the Global variable naming convention (GLNCON) preference. It's quite intriguing.

How to assign modified forms (SAP scripts etc.,) to Dunning texts

Hello, how do I assign forms (SAP scripts etc.,) to dunning texts according to no 5 above?
I've copied the form f150_dunn_01 and modified it. Now I want to assign my modified form to dunning text. In txn fbmp I have created new procedure and when I clicked on Dunning texts it takes me to dunning text screen where I should be able to assign my modified form. But the screen is greyed out and not editable. Is there anything I'm missing or I've permission issue?
Please help
Regards
Naz
Most of the config for Dunning is done with TCode FBMP.
Key Steps are :-
1.     Define the dunning procedure or use the standard
2.     Define the dunning levels (desired stages of reminder)
3.     Define the dunning interval (frequency of reminder)
4.     Line item grace periods & Min.days in arrears (acct) govern the criteria for picking items to be dunned along with Minimum amounts
5.     Assign forms (SAP scritps etc.,) to dunning texts. Forms contain the contents of the reminder notice and the format of notice.
6.     You can include the Sp GL Transactions as well.
7.     Customer/Vendor Master Records needs to be updated with the Dunning
8.     Procedure etc, Dunning tab in the master data
9.     Use F150 to run.

Hi Praveen,
Ok let me go through the steps that I have done so for.
1. New dunning procedure 004 been created in Txn FBMP
2. Then by choosing the assigned dunning procedure 004, trying to update the form by selecting the company code and then Dunning text. But the screen is grayed out.
Please pass me your email address then I will send you the screen shoots.
Thanks
Naz

How to remove extra html markups from adf generated code in webcenter porta

hi!
I am trying to develop navigation in oracle webcenter portal.
My code is generating extra div's for li and a tags. how to remove the extra div's.
code in my template for generating navigation is:
<div id="JS-MainNav " class="menu9 clearfix">
<ul class="jd-menu">

<c:forEach var="node" varStatus="vs"
items="#{navigationContext.currentModel.listModel['startNode=/, includeStartNode=false']}">
<li class="single">

<af:goLink id="gLink" styleClass="menu9two accessible"
destination="#{node.goLinkPrettyUrl}">
<af:outputText value="#{node.title}"/>
</af:goLink>
</li>
<c:if test="${node.selected}">
<c:set value="${node.children}" var="childNodes"
scope="session" />
<ul>

<c:if test="${childNodes ne null}">
<c:set var="childNodes"
value="${navigationContext.currentModel.currentSelection.parent.children}"/>
<c:forEach items="#{childNodes}" var="node">
<li class="fixMenuEN ${node.selected ? 'active' : ''}">

<af:goLink inlineStyle="#{node.selected ? 'font-weight:bold;' : ''}"
id="sub" text="#{node.title}"
destination="#{node.goLinkPrettyUrl}"/>
</li>
</c:forEach>
</c:if>
</ul>

</c:if>
</c:forEach>
</ul>
</div>


What's the HTML result in your browser form this code?

Field"Code group" is not in the result for report CRM_SRV_REPORT

Hi Guys,
For the tx CRM_SRV_REPORT - Service Process Monitor, the field "Code group" is not in the standar result, but, is in the initial screen for filter selection.
This field is not available in the layout modification.
How can I add this field to the layout of the result list?
Regards,
Lyda

Hi Lyda,
Additional field cannot be added in the layout of the result list.
If you will observe the code of the report CRM_TSRV_REPORT, in the field catalog, there is not Code, code group etc., hence it is not seen in the layout.
Since it is a std report it cannot be modified, either u can create a Z report by copying this or u can raise an OSS message for this.
Regards,
Shalini Chauhan

In wadl2java-generated code, NullPointerException from HttpTransportPipe

I wrote a WADL document and used JAXB schemagen to create an XSD for my Jersey RESTful web-service, and referenced that XSD in that WADL document.
Then, I used wadl2java to generate client-code for my service.
However, then, I had numerous jar-dependency problems while trying to run that generated code. Perhaps I got myself into some trouble by choosing the wrong jar-file in one case or another. I thought it was odd that one of the missing class-files was SOAPException. Another one is part of FastInfoSet. And one of the problems seemed to require adding a JSR-related jar provided by BEA.
I managed to find some possibly relevant source-code. However, it seems to simply indicate no need for an outputStream for a GET-request, which makes lots of sense:
From HttpClientTransport:
118:            public OutputStream getOutput() {
119:                try {
120:                    createHttpConnection();
121:                    sendCookieAsNeeded();
122:                    // for "GET" request no need to get outputStream
123:                    if (requiresOutputStream()) {At this point, I'm not able to use wadl2java, thanks to this failure to get this generated client-code running. I'd like to avoid writing custom client-code instead. I'd sooner revert to SOAP and wsdl2java.
Any help with this would be much appreciated.
Exception in thread "main" javax.xml.ws.WebServiceException: java.lang.NullPointerException
     at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:157)
     at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:74)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:559)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:518)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:503)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:400)
     at com.sun.xml.ws.client.Stub.process(Stub.java:228)
     at com.sun.xml.ws.client.dispatch.DispatchImpl.doInvoke(DispatchImpl.java:167)
     at com.sun.xml.ws.client.dispatch.DispatchImpl.invoke(DispatchImpl.java:193)
     at com.sun.research.ws.wadl.util.JAXBDispatcher.doGET(JAXBDispatcher.java:92)
     at com.foo.bar.restapi.client.Endpoint$Product.getAsProduct(Endpoint.java:66)
     at com.foo.bar.restapi.client.Test.main(Test.java:9)
Caused by: java.lang.NullPointerException
     at java.io.Writer.<init>(Unknown Source)
     at java.io.OutputStreamWriter.<init>(Unknown Source)
     at com.bea.xml.stream.XMLOutputFactoryBase.createXMLStreamWriter(XMLOutputFactoryBase.java:45)
     at com.sun.xml.ws.api.streaming.XMLStreamWriterFactory$Default.doCreate(XMLStreamWriterFactory.java:204)
     at com.sun.xml.ws.api.streaming.XMLStreamWriterFactory$Default.doCreate(XMLStreamWriterFactory.java:199)
     at com.sun.xml.ws.api.streaming.XMLStreamWriterFactory.create(XMLStreamWriterFactory.java:152)
     at com.sun.xml.ws.encoding.xml.XMLCodec.encode(XMLCodec.java:35)
     at com.sun.xml.ws.encoding.MimeCodec.encode(MimeCodec.java:64)
     at com.sun.xml.ws.encoding.XMLHTTPBindingCodec.encode(XMLHTTPBindingCodec.java:173)
     at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:128)
     ... 11 more

Thanks, that solved that problem.
Then, however, I had a couple of other problems, having to do with namespace declarations. I've apparently fixed them.
The one remaining problem is that the generated code seems to treat a certain template parameter as if it were a header-parameter. The WADL-file definitely uses style="template" for that parameter.
I temporarily manually patched the generated EndPoint class to get it working.
The effect of this problem was that the result was in the form of the HTML-message returned by Apache when a resource cannot be found. That was because that template parameter was missing and was being passed instead in a header.
Perhaps I'll investigate this further at some point. However, "time's a wastin'", and reverting to SOAP is now quite likely.
Thanks.

Selected set assignment to code group

I have maintained a catalog " S", under which i have maintained code groups and codes in QS41, but here the usage indicator is deactive. I cannot select it.
Now when i use QS51,i am unable to view the codes. the selected set is empty. In this case how to assign the code groups and codes to seleccted set.
any help, i am new to qm

There is some confusion you have in code gr & selected set.
In simple words -->in QS41 you create defect codes & code gr for catalo types like 1,3,9 etc.
But in QS51 you combine different codes from code grs to form selected sets.Practically selected sets are only used for Characteristics attributes(1) and Usage decision(3) and by default they carry valuations.
For catalog defect type (9) I would suggest to add and create your own codes and code groups as per business requirement in QS41.You should not actually create selected set for catalog 9.
for more details refer :
http://help.sap.com/saphelp_40b/helpdata/en/2d/3508f6448c11d189420000e829fbbd/content.htm

CODE Group, CODE Group Profile

Hi Experts
What is CODE Group and CODE Group Profile
Whats the use of CODE Group and CODE Group Profile
How it will works
I will be very happy to reward points.
Thanks and Regards
Kumar
Edited by: Kumar on Sep 24, 2008 8:48 AM

Hi Kumar,
Catalog
Catalogs are resources which help ensure the uniform use of terms. CRM uses a dual level hierarchy comprising of code groups and codes for catalogs. The terms are coded at client level in a corresponding coding. The codes themselves are composed of four characters, and are assigned to a code group composed of eight characters.
Code
A key that uniquely identifies the qualitative contents of a problem in a coded form that can be mechanically processed.
Each code is assigned to a code group in the catalog. A code can describe:
a characteristic attribute
a defect type
a usage decision
Code Group
A key for summarizing codes and structuring a catalog according to various criteria.
The assignment of codes to code groups takes place at client level.
Regards,
Shahina

Initiate Workflow by modifying form permissions

I'm a newbie to LC Workbench. I have used the standard mortgage app to model a process using my own pdf. My pdf in standalone alows for digital signatures and document attachments. However, these are disabled in Workflow 8.0.2. I have managed to use reader extensions to write the output from the flow to disk with the proper permissions enabked, but how do I initiate my workflow to do the same?

If I understand you correctly, you are starting with an XFA form and are using a modified renderer to render a PDF with RE. If your route names and complete button are not showing up then that means that you are not adding the Form Bridge code correctly. By default the renderer will do this (assuming that you are using an XDP to start with).
the other thing that can be happening is that you are saving a PDF out of Designer and using a docForm variable to hold that info. If that is the case then you must add the previously mentioned Form Bridge code to the form yourself as well as workflow fields to hold the workflow status info. These are held in two xfo objects in the Object Library (Custom Tab) in Designer. The workflow fields object is called Process Fields and the Form Bridge code is called Form Bridge. Simply drag these two objects onto your form. Now you must modify the submit button to send the entire PDF and not only the XML data. Look in the hierarchy view and locate the object called FSSUBMIT_. Now look at the object palette (Submit tab) and change the Submit As drop down to PDF. If this is the issue then that should do the trick.

How to embed "Adobe Form Central" code into my edge composition

hi everyone,
i've set up a contact form in Adobe Forms Central that i need to embed into my edge composition.
below is the link to my edge composition that i need the form to be embedded in:
https://www.yousendit.com/download/UVJqZm1jR3NOQnpFdzhUQw
below is the "embed code" generated by my Adobe Form Central form:
<script type="text/javascript" src="https://formscentral.acrobat.com/Clients/Current/FormsCentral/htmlClient/scripts/adobe.for m.embed.min.js"></script>
<script type="text/javascript">
var fz2L_2d7j5_2aHNwFeun6qCYOLQ = new ADOBEFORMS.EmbedForm({formId:"z2L-7j5*HNwFeun6qCYOLQ", width:700, transparent:true});
fz2L_2d7j5_2aHNwFeun6qCYOLQ.display();
</script>
thank you all very much for your help in advance!
i appriciate your help very much!
-sharon

hi everyone,
i'm still trying to figure out where to place the code provided from Adobe Form Central
an updated the edge compositon & code in this link: https://www.yousendit.com/download/UVJoZ285WkJsMHdVV01UQw
below is the updated Adobe Form Central code if you want to just see the code:
<script type="text/javascript" src="https://formscentral.acrobat.com/Clients/Current/FormsCentral/htmlClient/scripts/adobe.for m.embed.min.js"></script>
<script type="text/javascript">
var fz2L_2d7j5_2aHNwFeun6qCYOLQ = new ADOBEFORMS.EmbedForm({formId:"z2L-7j5*HNwFeun6qCYOLQ", width:700, transparent:true});
fz2L_2d7j5_2aHNwFeun6qCYOLQ.display();
</script>
any help would be greatly appricated!!!!!!!
i really need to get contact forms working for my clients
thanks agin
-s

Modifying Form Generator code groups

Similar Messages

Maybe you are looking for