Modifying iBGP distance for a Specific Prefix

Hi
I have scenario where I wish bgp backdoor could be used, but it can't in this case.
I have router learning a single prefix via EIGRP and iBGP. I would like it to prefer iBGP, but of course EIGRP wins due to distance (90).
I would like to modify a single prefix learned via iBGP to say 80 for example. So long as it wins over EIGRP.
I've researched few posts, but they point to eBGP. I would imagine the same could be acheived for iBGP. Has anyone done this and is there any other ways it can be acheived other than using ACL with distance command under BGP.
thank you

You may change the EIGRP AD for the specific prefix, as Julio outlines, it is probably best doing it this way than to play with BGP.
The way you can accomplish that is here:
R1 is advertising a connected network 1.1.1.0. There is an iBGP peering between R1 and R2. Also an EIGRP neighborship between them both. I want to influence R2's route to 1.1.1.0/24 to prefer iBGP (200) over eigrp (90).
Here is my current config and routes.
router eigrp 10
network 1.1.1.0 0.0.0.255
network 10.0.0.1 0.0.0.0
no auto-summary
router bgp 100
no synchronization
bgp router-id 10.0.0.1
bgp log-neighbor-changes
network 1.1.1.0 mask 255.255.255.0
neighbor 10.0.0.2 remote-as 100
no auto-summary
Rack1R2
router eigrp 10
network 10.0.0.2 0.0.0.0
no auto-summary
router bgp 100
no synchronization
bgp router-id 10.0.0.2
bgp log-neighbor-changes
neighbor 10.0.0.1 remote-as 100
no auto-summary
Rack1R2#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
1.0.0.0/24 is subnetted, 1 subnets
D 1.1.1.0 [90/409600] via 10.0.0.1, 00:06:30, FastEthernet0/0
10.0.0.0/30 is subnetted, 1 subnets
C 10.0.0.0 is directly connected, FastEthernet0/0
Rack1R2#
Rack1R2#show ip bgp
BGP table version is 4, local router ID is 10.0.0.2
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
r>i1.1.1.0/24 10.0.0.1 0 100 0 i
Rack1R2#
Now to modify the AD for the particular prefix in EIGRP.
Rack1R2(config)#router eigrp 10
Rack1R2(config-router)#distance ?
<1-255> Administrative distance
eigrp IP-EIGRP distance
Rack1R2(config-router)#distance 201 ? -Make it worse that iBGP
A.B.C.D IP Source address
Rack1R2(config-router)#distance 201 10.0.0.1 ? - Where you are learning the route from
A.B.C.D Wildcard bits
Rack1R2(config-router)#distance 201 10.0.0.1 0.0.0.0 1 - Followed by an ACL to match the prefix
Rack1R2(config)#ip access-list standard 1
Rack1R2(config-std-nacl)#permit 1.1.1.0
Rack1R2(config-std-nacl)#exit
Rack1R2(config)#
For me, it took effect immediately, but you may need to clear ip route x.x.x.x (i've experienced this before)
Rack1R2(config)#do show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
1.0.0.0/24 is subnetted, 1 subnets
B 1.1.1.0 [200/0] via 10.0.0.1, 00:03:28
10.0.0.0/30 is subnetted, 1 subnets
C 10.0.0.0 is directly connected, FastEthernet0/0
Now it has changed to prefer the iBGP route. Please take extra caution as doing this even with IGPs generally can cause routing loops.
hth.

Similar Messages

Eigrp - How to modify Admin distance for redistributing connected links and over WAN

We have a single EIGRP domain 101 across 2 locations (A and B) separated by a WAN link. Each location has a number of L3 switches at the IDF behind the router which has the L3 vlans VL1, VL2 etc. We run eigrp 101 across all the switches and on the routers but we dont advertise any of the L3 vlans on them and we do redistribute static and connected for the static and the vlans to be distributed on eigrp.
Qn
1. How do i reduce the admin distance of the directly connected vlan on IDF on our core switch. ie. Vl1 and Vl2 that are distributed via connected has a admin distance of 170 locally as the other switches sees that as External without having to advertise the networks individually on each switch.
2. Is that possible to increase the admin distance over the WAN link without having to create a 2nd eigrp domain. ie.. Add a admin distance of say 50 over the WAN link and that way devices on both sides do see that there is a 130 distance for the remote side and 90 for local for admin distance.
Why?
I am trying to separate two locations and i don't think we will be able to create an additional domain and i am trying to see alternate methods of achieving this.
Additional info-
The design i mentioned has 2 locations with a WAN connection and i have mixed (90/170) distance based on where the routes are coming(eigrp/connected/static) from eventhough everything is within the same network. We only have 1 Eigrp network 101 and was looking to alter the AD for just connected if at all possible.
Assuming i put in all the routes into the network how can i make site 2 see the site 1 network with a larger admin distance and 1 to 2 with a larger admin distance while not altering the admin distance within the local site.
Underlying reason: We are getting a MPLS link(lower bandwidth) connecting to site 3,4 and 5 at both sites and wanted to clear the internal routing first before i can add them or redistribute them into bgp.

If these two sites are connected via a P2P link and you are exchanging EIGRP routes across it then you need to be aware of what you redistribute into BGP because each site will know about it's own subnets but also the other sites subnets.
If you just redistribute all EIGRP at both sites then it's a lottery as to which MPLS connection the non EIGRP sites use.
So you either need to -
1) when you redistribute EIGRP at each site into BGP use a route map and only allow the local networks for that site
or
2) if you want each of the EIGRP sites to back each other's MPLS connection up you could have them both advertise out all networks ie. their own and the other EIGRP site's networks but modify the BGP attributes of the non local networks so they are least preferred.
You still want to use a route map to ensure only the local and other EIGRP sites network are redistributed because remember you are also receiving BGP routes from the non EIGRP sites and redistributing these into EIGRP at each site and these are exchanged via the P2P link as well.
It realty depends on what you are trying to do.
The actual basic redistribution is very straightforward, see this link -
http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/113506-failover-eigrp-bgp-00.html
but you need to decide what you are going to do in terms of EIGRP to BGP advertisements as covered above.
I'm not trying to make things complicated for you but because you have a P2P link connecting these sites and you are running EIGRP over it then any routes received via BGP will be redistributed into EIGRP and you need to make sure they are then not redistributed back into BGP on the other site router.
Jon

Is it posible Modify a Site Profile for a specific Site?

Hi experts,
Is it posible to modify the Site Profile for a specific Site?? How can I do this?.
Regards,

Hi
With standard configaration it is not possible but possible in back ground by changing Site category in table
i.e
A is for Stores
B is for Distribution Center
Change site category with the help of ABAPer in debugg mode.
Regards
Sudha

How do I turn off all alerts for a specific email account

I want to disable all notifications for a specific email account and I can't find the options to do this. So basically I have 3 email accounts linked on my blackberry. I and I want to make it so that any time account #3 gets an email I don't get a red flashing light or a new message * anywhere. I case you're wondering I've funneled all those annoying promo adds to this one account. It's just that sometimes some of them actually have good deals so I want to be able to check them every now and then but it's seriously annoying when my red light is going off constantly. NEVER MIND! I found it, but I'm going to leave this here incase anyone else it looking for something like this. You go into notification profiles and change the settings for that profile. So it's : Notifications -> Profiles -> Normal (or which ever one you want) -> Customize App Notifications -> Email Messages -> Select email account you want -> Turn off all notifications or modify them to your preference. It does suck that you can't just globally set it by email account. It seems you have to go through each profile and change the settings one at a time. Most people probably only have 3 though so it's not that big a deal #firstworldproblems. DOUBLE NEVER MIND! So the "solution" I mentioned above only seems to work for the LED indicator and the instant popup you that comes on the top of the screen when you get a new notification. I'm still getting the red "new email" star on the side bar when I do a quick look from the homescreen or an app. And the 3rd email account has a "new email" red star next to it as well. Hoping someone out there knows how to turn them off for a specific email account. Thanks. - Kbye

Hi, I am using German OS therefore maybe the items are called differently in English: 1) Go into the main menu 2) Select "Alerts" 3) select the Profile you like to adjust 4) Select App Alerts 5) Select Email 6) You sould see your 3 mail accounts listed 7) Select the one you like to "mute" and you can set everything (sound, LED, vibration etc. individually for this acount) Hope it helps Alex

Setting a private flag on an activity for a specific Partner Function

Hi. I have this requirement. Display on private flag "My activities". Display just the Activities for a specific Function partner ej. Parner Responsible. Actually the system displays on "my activities" the activities not just for person responsible but also the activities for the created by or agent partner function
Report: Activity Monitor
Does anybody knows if there is a way to modify this to display the activities for a specific Function partner on the Biz Activity?

Max,
I tried to find any exits in this program but couldnt find any.
But I have following idea in mind:
1. I dont think you need to make this change on 'my activities'. Instead use of the third 'My ...activities' where you can give partner function & BP number as your own number. I hope it works.
2. Create a new program by copying the Actvity Monitor program and make the small change you are looking for somewhere in that program (I dont know where).
Sorry, I dont have any concrete solution for you.
Best Regards,
Vivek

Tcp_intranet channel to accept only for a specific internal IP address

I am currently using SunOne Messaging Server v5.2:
I would like to configure our MTA to only deliver emails to their proper mailstore if the emails are from 2 specific internal IP addresses. If emails that originated from the intranet are not from the above 2 IP addresses then I would like to re-route the emails to a particular MTA(port 25) for processing. Can this be done? And if so, what changes do I need to make to the imta.cnf file/mappings file?
The tcp_local channel for outgoing emails should remain the same. My guess is that I have to modify the tcp_intranet channel to only accept from specific IPaddresses, Otherwise pass the emails to another channel or MTA for processing.
Question: Can a user spoof an Email with an improper IP address. And if so, do I have to turn on reverse lookup to stop this from happening Or is reverse lookup on by default? Where is the reverse lookup setting? In the imta.cnf file?

by default, we do examine the ip address of a mail sending partner. this is hard to spoof, and it's not based on "from" attribute.
However, I'm not at all sure that what you're asking for is truly something achieveable by any normal means, nor if it's truly useful ..
Perhaps you could create another channel for your specific ip addresses, and that would work. . .

For a specific PO type, trigger the workflow

Hi Gurus,
I have a requirement, for a specific PO type WF should be triggered.
In my case, I am using BUS2012 for PO type.
In basic data->start evenets, I add BOR Object as BUS2012 and even as CREATED.
Now, when I click on conditions, I do not see BSART/PO type as one of the attributes of the std business object.
In this case, what additional needs to be done or is there any other way to do this?

Hello,
If you cannot find a suitable attribute in your business object (in this case BSART), the normal way to do this is to add this new field to the business object in SWO1. Since you cannot modify SAP standard object, you can create a Z-version (BUS2012) of it. This must be a subtype of the standard object and you must do a so called delegation between the standard and custom object. Delegation means that your system starts to use the Z-version instead of the standard one, and thus you can use all methods/attributes that you create in your Z-object. In any case, this is absolutely basic stuff for any WF developer and you should find lots of instructions how to do this by searching.
Once you have the Z-version done & delegated, just add the new attribute BSART to it, and you are free to use it in your conditions.
Regards,
Karri
Edited by: Karri Kemppi on Dec 13, 2011 3:35 AM

Searching for a specific file size

Hello,
It's been a while but it seems like XP let me search for specific file sizes - e.g. if I wanted to search for files that were greater than 10GB or if I wanted to search for files less than 20GB.
I can't figure it out in Windows 8.1.
If the answer is possible through standard search and not powershell, I'd prefer the GUI way.
Thanks

In File Explorer (was Windows Explorer), type the search criteria into the box in the top right of the screen and press Enter.
Example searches are:
A minimum file size, simply type size:>30,000KB into the Search box and press Enter.
type:=.pdf or type:=.doc will display specific file types.
filename:x will display files using a partial filename. x represents the partial filename you want to search for.
kind:video, kind:music or kind:pictures will find all the videos, music or pictures.
If you just click or tap in the Search box, Search Tools will appear which allows the choosing of a Kind, a Size, Date Modified, Other Properties and Advanced search. In Folder Options > Search Tab, the search options can be changed, e.g. Find partial
matches.
Providing the location is indexed, you can search in File Explorer for a specific word or phrase by typing content:
followed by your phrase enclosed in double quotes. This will produce a list of files matching the criterion.
Speed up the search by opening File Explorer (was Windows Explorer) at the folder you want to search, rather than at the root folder. Also, pressing F3 will show Search options like Date Modified and Size.
Ninety-nine per cent of politicians give the rest a bad name.

How to create an EventListener for a specific keyboard press?

Hello,
I have been trying to figure out how to switch my actionscript3 from a mouse click to a keyboard press. I'm new to Flash, but the problem I keep coming to is that I need to have 3 separate keys programmed in to do three seperate outcomes. I have messed around with eventListeners for keyboard presses, but I cannot figure out how to have flash listen for a specific key press and then do an action based on that specific key press.
Here is my actionscript. Any suggestions on how I can modify the mouse clicks to be keyboard presses, where key 's' = btn1 and triggers gotoAndPlay(2), 'g' = btn2 and triggers gotoAndPlay(3), 'k' = btn3 and triggers gotoAndPlay(4) as outline below. I also need my timer and writing to an exteral file to remain the same.
stop();
var startTime:Number=getTimer();
var elapsedTime:Number;
stream.writeUTFBytes("Item1,");
function BTN1Action(eventObject:MouseEvent) {
     elapsedTime = getTimer() - startTime;
          stream.writeUTFBytes("Tar1,");
          stream.writeUTFBytes(elapsedTime.toString());
          stream.writeUTFBytes("\n");
          gotoAndPlay(2);
function BTN2Action(eventObject:MouseEvent) {
          elapsedTime = getTimer() - startTime;
          stream.writeUTFBytes("Tar2,");
          stream.writeUTFBytes(elapsedTime.toString());
          stream.writeUTFBytes("\n");
          gotoAndPlay(3);
function BTN3Action(eventObject:MouseEvent) {
          elapsedTime = getTimer() - startTime;
          stream.writeUTFBytes("Tar3,");
          stream.writeUTFBytes(elapsedTime.toString());
          stream.writeUTFBytes("\n");
          gotoAndPlay(4);
BTN1.addEventListener(MouseEvent.CLICK, BTN1Action);
BTN2.addEventListener(MouseEvent.CLICK, BTN2Action);
BTN3.addEventListener(MouseEvent.CLICK, BTN3Action);
Any assistance with this is greatly appriciated.

Assuming you want to monitor key press on the button BTN1, you can do following:
// Add a key up event listener on the button (or on the source where the key press needs to be captured)
BTN1.addEventListener(KeyPress.KEYUP, BTN1KeyUpAction);
// BTN1KeyUpAction sample, you can modify this
function BTN1KeyUpAction(e:KeyboardEvent):void {
    if(e.keyCode == Keyboard.S) {
    gotoAndPlay(2);

Using CRM ACE for the specific requirement.

Hi,
We are implementing the CRM ACE for the SPecific authorization requirement.
I will explain our Requirement in brief,
1)For Accounts(BP), only Bp's who are maintained in the Relationships tab other than contact person should be able to
edit that account. Others wont even have authorizations to view that account.
2)For Opportunities, only Bp's who are maintianed in the sales team will have access to edit that opportunity, others wont
have access to even view that opportunity.
3)For activities , Only Bp's who are maintained for the Activity Partner's will have acces to edit that activity.
As this cannot be done using the normal authorization concept,we are using the CRM ACE.
we have defined all the rule id's, AFO class, AFU class, OBF Class, and Right id, Work package and user group.
Is there any other better way than CRM ACE ?
If you worked any such kind of scenario in past can you send me those details.
Thanks
Rajani

Hi Myfriend,
Please send me step by step procedure to create role and how to use ACE in authorization and how authorizatoin table need to modify in CRM and how Transaction and table is configure in order to assinged to user. Please send with taking two good CRM transaction example
Thanks
Qureshi

Defaulting batch and valuation type for a specific division for tcode me21n

Hi
I would like to default the valuation type and batch for a specific division while creating the PO.
Kindly let me know if there is any user exit for this.
Thanks & Regards
Bhagya

Hi .
Actually my requirement is while you are creating PO, the value say 'ABC' must be defaulted both in Batch and valuation type but when change that to 'DEF' it should allow you.. means you should be able to modify the batch and valuation type fields. I can be kept empty also.
I tried using field exit to default Batch and valuation type, but it does not work if the batch is empty.
If I use the BADI you mentioned what are import and export parameters and how do I code to meet my requirement.
Kindly let me know.
I will definitely reward points if it works.
Thanks in advance
Bhagya

[svn:fx-trunk] 12944: Added support for state specific sccessible names in ToggleButtonAccImpl

Revision: 12944
Revision: 12944
Author:   [email protected]
Date:     2009-12-14 21:36:44 -0800 (Mon, 14 Dec 2009)
Log Message:
Added support for state specific sccessible names in ToggleButtonAccImpl
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ToggleButtonAccImpl.as

Sorry about that. I am not exactly sure where the problem is, but I know it takes place after I put the <nav> in (in the html portion). If I understand what I am learning, the CSS at the top will structure my html code so I would have thought the CSS tageting my nav would be the focus. Maybe it is a different section though.
CSS part:
nav p {
font-size: 90%;
color: #FFC;
text-align: right;
font-weight: bold;
background-color: #090;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-top-width: 2px;
border-top-style: solid;
border-top-color: #060;
HTML part: (bold italic is the part I added)
<body>
<div class="container">
<div id="apDiv1"><img src="Lessons/images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
<header></header>
<nav>
    <p>Home | About Us | Contact Us</p>
</nav>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="#">Green News</a></li>
      <li><a href="#">Green Products</a></li>
      <li><a href="#">Green Events</a></li>
      <li><a href="#">Green Travel</a></li>
      <li><a href="#">Green Tips</a></li>
    </ul>

How To Fix View Options for a Specific Folder

I have several folders that I prefer to view in specific ways: Applications in list view, alphabetically, with large icons; another also in list view, by most recently modified, also large icons; another in icon view, with icons set to a specific size, etc.
Obviously, I know how to use View Options to set the view as I'd like for each specific folder. And I've set these folders with the "Always Open in..." button.
Unfortunately, after closing that folder, the next time I come back to it, it's reverted to different View settings: a folder that I'd set to view by most recently modified is back to alphabetical, or the icon size has changed, etc.
Am I missing something? I had noticed similar behavior under 10.6, but I attributed it then to the fact that my drive was dying, and I was getting all sorts of wonky behavior.

or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10

Change Pointers activation for customer specific Infotype

dear friends,
could you please let me know how to activate the change pointers for customer specific infotypes? Currently we are using message type HRMD_ABA.
regards,
jp

Anand:
Unfurtunatly, not all the modification are registered in the log. For ei., You can track the systema status modification, the PR generation, etc. What fields change are you trying to modify?
Hope this help
Ezequiel

CQWP does not return result for a specific query when filtering on a managed metadata field.

Hi,
We are facing a serious production issue. We've search the web extensively but to no avail.
Problem:
CQWP does not return result for a specific query when filtering on a managed metadata field.
ULS log:
The Uls logs provides 3 different messages that I could relate to every time the query is executed. The last item(level Medium) is displayed 14 times. For readability I've moved the ULS logs to the bottom of this question.
Query:
The query is as follows:
(I've translated this from dutch so pardon any typo's)
Query: (top selection) Display items from all sites in the site collection
ListType: Documentlibrary
Contenttype:
Items from this group:Custom Document Contenttypes
Items from this content type: Verklaring
Filter: Soort is equal to X
extra info: the field soort (Type) is a managed metadata field that was assigned the value X
Managed Metadata Structure:
-managed metadata service
-Contoso
    -Enterprise Taxonomy (term set)
      -Document (term)
        -Verklaring (term)
          -Soort (term)
            -x (term)
EXTRA INFO:
When I modify the filter to filter on Title the CQWP DOES return the correct document!
When I modify the query settings to search a specific library the CWQP also does return the correct document! (In this case I am filtering on a managed metadata field).
QUESTION:
Why doesn't the CQWP return the document when filtering on a managed metadata field over the entire site collection.
Why does the CQWP return the document when filtering on a managed metadata field over a single library.
(The type of information the CQWP should return (Soort:x) is stored in a dozen document libraries!)
Here are the ULS logs.
Product: Web Content Management
Category Publishing
Level: Monitorable:
CrossListQueryCache::GetSiteData() caught exception (Microsoft.SharePoint.SPException: Kan deze actie niet voltooien. Probeer het opnieuw. ---> System.Runtime.InteropServices.COMException (0x80004005): Kan deze actie niet voltooien. Probeer
het opnieuw.     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)
bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     --- Einde van intern uitzonderingsstackpad
---     bij Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery,
ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery
siteDataQuery, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)
bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)) for query: '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}"
Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}" Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True"
Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True" Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef
ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}"
Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}" Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True"
Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True" Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef
ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}"
Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef
Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef
Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True"
Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' at url: /. Titel webonderdeel: Inhoudsquery
Product: Web Content Management
Category Publishing
Level: Warning
Error occured while processing a Content Query Web Part. Performing the following query '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}"
Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True" Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True"
Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}" Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}"
Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True" Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True"
Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef
ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}" Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists
ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value
Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' generated the following error: Kan deze actie niet voltooien. Probeer het opnieuw.
at the following url: /. Titel webonderdeel: Inhoudsquery
Kan deze actie niet voltooien. Probeer het opnieuw. This is Dutch. It means something like: Cannot complete this action. Please try again.
Product: Web Content Management
Category Publishing
Level: Medium (this message is displayed 14 times)
ConsoleUtilies.GetContextualControlMode had no currentPage so the current SPWebPartManager mode cannot be retrieved.

Hi,
while digging through the logging (again) I found some extra logging regarding the same correlation id (see details below).
We have a fairly large term store (4000+ lines).
If somebody has a clue or tip that would greatly appreciated!
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql. This can result in blocking in sql and excessive memory use on the front
end. Verify that no binary parameters are being passed as literals, and consider breaking up batches into smaller components. If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields. 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa43 High Slow Query Duration: 127.1515 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed:    bij Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command,
SqlQueryData monitoringData)     bij Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
retryfordeadlock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock)     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String
bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter
pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery siteDataQuery, Boolean
useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea
cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea ca, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(SPSite
site, String webUrl, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.IssueQuery()     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.GetXPathNavigator(String
viewPath)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect()
bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()
bij System.Web.UI.Control.EnsureChildControls()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()
bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest()
bij System.Web.UI.Page.ProcessRequest(HttpContext context)     bij ASP.BLANKWEBPARTPAGE_ASPX_1653093133.ProcessRequest(HttpContext context)     bij Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext
context)     bij System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     bij System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
bij System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     bij System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     bij System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
wr, HttpContext context)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 1971313a-6baa-49e9-bace-d024ce67f25c

Modifying iBGP distance for a Specific Prefix

Similar Messages

Maybe you are looking for