Module Interface Problems
I'm having a problem passing variables from one module to
another via an interface.
I have an application that calls a module when it enters a
specific state, which works fine. The module is loaded through
<mx:ModuleLoader id="modMyModule1" url="myModule1.swf"> and
it works as expected.
Within this module, I have a button that when pressed, calls
a second module via a module loader, using an interface. I need an
interface, as there is a variable that I need to pass between these
two modules. Clicking the button runs a couple of functions, ending
with:
currentState='Results';
modMyModule2.url='myResults.swf";
and the states look like:
<mx:states>
<mx:State name="Results">
<mx:AddChild>
<mx:ModuleLoader id="modMyModule2"
ready="readyModule(event)" error="modErrorHandler(event)" />
</mx:AddChild>
</mx:State>
</mx:states>
So when the module is ready, the following code is invoked in
modMyModule1:
private function readyModule(evt:ModuleEvent):void
var ichild:* = modMyModule2.child as IResults;
if(ichild != null) { ichild.searchResults =
arrSearchResults; trace("NOT NULL"); }
else { trace("NULL!"); }
modMyModule2 contains 'implements="IResults"' in it's root
module tag, and IResults is defined as follows:
package
import flash.events.IEventDispatcher;
import mx.collections.ArrayCollection;
public interface IResults extends IEventDispatcher
function set searchResults(arrResults:ArrayCollection):void;
function get searchResults():ArrayCollection;
I have corresponding getter and setter functions in my
modMyModule2, but they never seem to get called! For some reason,
the interface is always failing, and therefore in my readyModule()
function in the first module, it always traces "NULL".
I can access the required variable in the second module via
parentApplication.modMyModule1.child.arrSearchResults, but I'd
prefer to do it via the interface.
I've gone through all the docs, but I can't see what I've
done that's different from anything in them, except for the fact
that I'm calling a module from a module via an interface.
Can anyone shed some light on this at all?
Cheers,
K.
I don't have a solution to your problem, but I can point you
somewhere. The documentation team has released the module
documentation, but I think it is only currently available at their
blog (as the documentation will be released later).
http://blogs.adobe.com/flexdoc/
It should be the first entry of the blog. I noticed that one
of the data points mentioned inter-module communication, -
hopefully that is what you are looking for.
Good Luck,
Andy
Similar Messages
-
I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
StuNot sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu -
CS2 Scanning Problem - error with acquisition module interface
Hi there,
I have an Epson Perfection 4180 scanner which has worked for years. I moved, plug everything back in, the scanner works one time, and from then on, I get this error: "Could not complete the Import command because of an error with acquisition module interface."
I've searched around, and seen others with this problem, but, no real solution. From what I've read, it's a Photoshop issue. I've downloaded the TWAIN drivers and re-installed the scanner, and deleted Photoshop's preferences file. The scanner does work through the Windows Scanner Wizard. I've turned off the Windows Image Acquisition thing in the control panel, and then turned it back on.
ARGH, I am really pulling my hair out. Please help!
Thanks so much!I'd try to avoid the hassle of messing with the PS installation if possible.
One other thing I have seen is to temporarily disable the Twain plug-in, with a ~ in front of the name, in
C:\Program Files\Adobe\Adobe Photoshop CS3\Plug-Ins\Import-Export -
Can't use certain filters- "problem with the filter module interface"
Hello,
I frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed. Any recommendations on how to fix this? Is it possible to undo the update?Usually this means a bug in the third party plugin that you are using.
-
Company was not supplied in Function module interface
Hi all,
When i tries to access the following tcode - me52n,me53n i got following erro message "Company was not supplied in Function module interface" ,
ThanksHi Navdeep,
Maintain company code in your user profile with the parameter id BUK.
like in you user profile, on parameter id tab give the parameter id name BUk and value '0001' (the company code against purchase requistion had been created)
Hope it will solve your problem.
Regards
Krish -
CS5 error message - file-format module interface
First post - sorry if it's not in the best place. CS5 has suddenly fallen over with the following error message when trying to open a raw file (.CR2 / 5DII), which it could open previously:
"Could not complete request because of a problem with the file-format module interface".
Googling has not produced much at all on this topic, and none of it helpful.
Any thoughts on this please?Thanks for getting back to me. I've made a little progress. It seems that my usual identity is corrupted, or is being affected by PS crashes, which are crashing the DDE server window and also preventing some other applications (such as Adobe Acrobat Pro 9 and even Internet Explorer) from running in that identity too. If I close and restart that identity, it's fine again as long as I don't even open PS.
So I created a new identity just to see if PS would run OK there, and it did, for about 4 hours, but then errors started to recur, such as 'PS has encountered an expected problem and needs to close....' when opening raw files. As I'm trying to finish off editing a set of wedding photos, this is a pain.
I'll try reinstalling PS, but I suspect the problems I'm seeing may be due to a lack of resources. So, reluctantly, I'm thinking it may be time to replace my faithful and carefully maintained Pentium 4 running XP, and enter the dizzy world of 64-bit. One issue may be installing CS5 on a new machine, since I only have an upgrade disk, having migrated all the way from a full copy of PS6, via a CS2 upgrade. I understand that it would be wise to go for Windows 7 Pro, which contains an emulation of XP and therefore allows older 32-bit software to be installed. Any other points to consider?
By the way, your suggested search for the file 'camera raw.8bi' turned up two versions - the CS5 one, and the older CS2 file. -
Filter Module Interface Error, Lockup
Well, I found another issue(s) with the latest Photoshop. Incompatible plugins, lie Topaz Denoise from Photoshop 5.5, bring up an error dialog (problem with the filter module interface) which cannot be cleared with a click or a key press, rather, it just locks the program, requiring a force quit. Error handling can be more robust.
Contact Topaz for updates to fix the bugs in their plugin.
-
Dear All gurus/experts,
I need help from you to solve an interface problem. The problem is how to create interface where I want to implement HR application (java) and SAP B1. I am really confusing to the stepwise I must do in creating interface.Do I must define fields/columns, forms, document or report in the SAP B1 side first and then compare to the HR application fields/columnc/forms/documents/reports. The difference between them then fixed and created if required. The main purpose is all the HR process will be handled by HR Application and the data will be sent to SAP B1. The data directly posted to G/L for example payroll, expenses relate to HR and also pension. is it possible for me to create a template and then the template update to SAP B1 using Data transfer workbench (DTW) ? the application can be updated the data file into CSV, txt, etc. If you have any experience about that, pls share to me. I appreciate your answer so much.
TIA.
Rgds,Tks for your answer. Actually it is interfacing other product or solutions, for example human resource solutions or from microsoft dynamics manufacturing module. is it possible to do that ? I appreciate your answer. TIA
Rgds, -
Interface Problems in Yosemite
Problem shows up when using software other than the native OS X apps.
If I attempt to close a window behind the app that has focus by clicking the red x part of the semaphore buttons (top left on every window) it will not work unless I change focus to that app by clicking the bar at the top.
As an example if I'm using Byword to view a document while composing an email in Airmail once I finished and move on to viewing, say a receipt, in Airmail and want to make a copy of that receipt and place it on the desktop. I'm done with Byword and it is covering the desktop so why not close it and get it out of the way. I move the mouse pointer over the red X part of the semaphore buttons and click, nothing happens. I have to bring Byword into focus by clicking the title bar, then click the red x to finally close the window. If the app below Airmail happened to be Safari the red X works properly.
On my Mac Mini using Yosemite this works properly for all apps.
This is only a slight problem but I have been having the odd quirky interface problems for the past while and I'm worried that something has gone south and these may end up adding together to make a very large problem. Initially I had problems with PopClip which seemed to be screwing around with the interface buttons in Rapidweaver 6. I removed the app to clear that problem using AppDelete.
While trying to diagnose this problem I have removed all the auto login apps that I can and rebooted several times to no avail.
Any help would be greatly appreciated!
EtreCheck version: 2.1.8 (121) log:
EtreCheck version: 2.1.8 (121)
Report generated February 5, 2015 at 12:32:53 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Late 2012) (Technical Specifications)
iMac - model: iMac13,2
1 3.4 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
Empty
BANK 1/DIMM1
Empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
iMac 2048 x 1152
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:0:46
Disk Information: ℹ️
APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk2) / : 1.11 TB (263.43 GB free)
Core Storage: disk0s2 120.99 GB Online
Core Storage: disk1s2 999.35 GB Online
APPLE SSD SM128E disk0 : (121.33 GB)
EFI (disk0s1) <not mounted> : 210 MB
Boot OS X (disk0s3) <not mounted> : 134 MB
Macintosh HD (disk2) / : 1.11 TB (263.43 GB free)
Core Storage: disk0s2 120.99 GB Online
Core Storage: disk1s2 999.35 GB Online
USB Information: ℹ️
Verbatim Portable USB 3.0 Drive 1 TB
EFI (disk3s1) <not mounted> : 210 MB
Verbatim HD (disk3s2) /Volumes/Verbatim HD : 999.86 GB (31.06 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Logitech USB Receiver
Samsung Electronics Co., Ltd. ML-2160 Series
Wacom Co.,Ltd. Wacom Wireless Receiver
Razer Razer 1600dpi Mouse
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Transmit.app
[not loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) [Click for support]
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.6.3) [Click for support]
[not loaded] com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
[not loaded] com.vmware.kext.vmnet (0231.47.74) [Click for support]
[not loaded] com.vmware.kext.vmx86 (0231.47.74) [Click for support]
[not loaded] com.vmware.kext.vsockets (90.6.0) [Click for support]
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
[loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.9) [Click for support]
[loaded] com.avatron.AVExVideo (1.7 - SDK 10.9) [Click for support]
[loaded] com.globaldelight.driver.Boom2Device (1.1 - SDK 10.10) [Click for support]
[loaded] com.logitech.manager.kernel.driver (4.10.1 - SDK 10.8) [Click for support]
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
[not loaded] com.wacom.kext.ftdi (1 - SDK 10.9) [Click for support]
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.7.0 - SDK 10.6) [Click for support]
[loaded] com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Click for support]
[loaded] com.eltima.SyncMate.kext (0.2.5b15) [Click for support]
[loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.1) [Click for support]
[loaded] com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) [Click for support]
[not loaded] com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) [Click for support]
[not loaded] com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9) [Click for support]
/System/Library/Extensions/Soundflower.kext
[not loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Click for support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.Logitech.Control Center.Daemon.plist [Click for support]
[running] com.logitech.manager.daemon.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.realvnc.vncserver.peruser.plist [Click for support]
[not loaded] com.realvnc.vncserver.prelogin.plist [Click for support]
[running] com.sophos.uiserver.plist [Click for support]
[running] com.wacom.wacomtablet.plist [Click for support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[loaded] com.barebones.authd.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.realvnc.vncserver.plist [Click for support]
[loaded] com.rogueamoeba.instanton-agent.plist [Click for support]
[loaded] com.sharpcast.xfsmond.plist [Click for support]
[loaded] com.sheepsystems.CocoaPrivilegedHelper.plist [Click for support]
[running] com.sophos.common.servicemanager.plist [Click for support]
[loaded] de.appgineers.Mountain.Helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[running] com.ecamm.printopia.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.pia.pia_manager.plist [Click for support]
[loaded] com.sheepsystems.BookMacster.3EAE0703-42...plist [Click for support]
[loaded] com.sheepsystems.BookMacster.3EAE0703-42...plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
[failed] ws.agile.1PasswordAgent.plist [Click for support] [Click for details]
User Login Items: ℹ️
WD Quick View Application (/Library/Application Support/WDSmartware/WDQuickView.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
Default Browser: Version: 600 - SDK 10.10
GarminGpsControl: Version: 4.0.2.6 Beta - SDK 10.6 [Click for support]
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
1Password
Clip to DEVONthink
Choosy
Ember
Save to Pocket
Stache
3rd Party Preference Panes: ℹ️
AirServer Preferences [Click for support]
Backblaze Backup [Click for support]
Choosy [Click for support]
Flash Player [Click for support]
FUSE for OS X (OSXFUSE) [Click for support]
Hazel [Click for support]
Java [Click for support]
Logitech Control Center [Click for support]
Logi Preference Manager [Click for support]
Printopia [Click for support]
WacomTablet [Click for support]
WDQuickView [Click for support]
Web Sharing [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 1.11 TB Disk used: 848.39 GB
Destinations:
Verbatim HD [Local]
Total size: 999.86 GB
Total number of backups: 101
Oldest backup: 2013-11-22 16:26:50 +0000
Last backup: 2015-02-05 15:55:38 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 848.39 GB X 3)
Top Processes by CPU: ℹ️
12% mds
2% WindowServer
0% loginwindow
0% fontd
0% mds_stores
Top Processes by Memory: ℹ️
292 MB mds_stores
172 MB SophosScanD
172 MB InterCheck
155 MB SophosAntiVirus
120 MB Finder
Virtual Memory Information: ℹ️
3.32 GB Free RAM
2.72 GB Active RAM
1.40 GB Inactive RAM
1.15 GB Wired RAM
1.56 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 5, 2015, 12:30:03 PM Self test - passed
Feb 4, 2015, 10:59:58 PM /Library/Logs/DiagnosticReports/RapidWeaver 6_2015-02-04-225958_[redacted].cpu_resource.diag [Click for details]
Feb 3, 2015, 03:07:17 PM /Users/[redacted]/Library/Logs/DiagnosticReports/WebKitPluginHost_2015-02-03-15 0717_[redacted].crash
Feb 3, 2015, 03:02:23 PM /Users/[redacted]/Library/Logs/DiagnosticReports/WebKitPluginHost_2015-02-03-15 0223_[redacted].crash
Jan 15, 2015, 08:04:41 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-15-200441_[redacted].panic [Click for details]Try un-installing Sophos.
Sophos Un-install -
Interface Problems: DBA = Data Pump = Export Jobs (Job Name)
Hello Folks,
I need your help in troubleshooting an SQL Developer interface problem.
DBA => Data Pump => Export Jobs (Job Name) => Data Pump Export => Job Scheduler (Step):
-a- Job Name and Job Description fields are not visible. Well the fields are there but each of them just 1/2 character wide. I can't see/enter anything in the fields.
Import Wizard:
-b- Job Name field under the first "Type" wizard's step looks exactly the same as in Export case.
-c- Can't see any row under "Chose Input Files" section (I see just ~1 mm of the first row and everything else is hidden).
My env:
-- Version 3.2.20.09, Build MAIN-09.87
-- Windows 7 (64 bit)
It could be related to the fact that I did change fonts in the Preferences. As I don't know what is the default font I can't change it back to the default and test (let me know what is the default and I will test it).
PS
-- Have tried to disable all extensions but DBA Navigator (11.2.0.09.87). It didn't help
-- There are no any messages in the console if I run SQL Dev under cmd "sqldeveloper\bin\sqldeveloper.exe
Any help is appreciated,
YuryHi Yury,
a-I see those 1/2 character size text boxes (in my case on frequency) when the pop up dialog is too small - do they go away when you make it bigger?
b- On IMPORT the name it starts with IMPORT - if it is the half character issue have you tried making the dialog bigger?
c-I think it is size again but my dialog at minimum size is already big enough.
Have you tried a smaller font - or making the dialogs bigger (resizing from the corners).
I have a 3.2.1 version where I have not changed the fonts from Tools->Preferences->CodeEditor->Fonts appears to be:
Font Name: DialogInput
Font size: 12
Turloch
-SQLDeveloper Team -
BAPI or Function Module interface from XSD definition
Given an XSD file, is there any way to automatically generate a BAPI or Function Module interface from it?
BR,
Tony.Hi,
There are two approaches to create interfaces in XI
- Outside-In - interfaces definitions are stored in XI as e.g. xsd and PROXY classes/interfaces are generated in business system
- Inside-Out - interfaces are developed in business system and imported into XI e.g. IDocs, BAPIs, RFMs
So it is NOT possible to generate BAPI or FM based on XSD definition, but you can generate proxy.
Regards,
Jakub -
"Internal module error" PROBLEM SOLVED ! ! !
At least in my case.
I tried to update my phone (Nokia E50, prod. code: 0536382) with NSU, but I always got the frustrating "Internal module error" message. I spent a whole afternoon trying. After several attempts without any success I accidentally discovered the solution. When the error message appeared again, I noticed, that the small USB icon right below the battery level indicator is gone - so is the connection. How to restore the connection? The NSU says, you should not disconnect the phone, so why the connection interrupts during the update? (I suppose that NSU does the download first and in the meantime nothing happens to your phone. During the download your PC may shut down the USB port to save power. When the download from the internet is done, NSU tries to upload the software to the phone, but there is no connection anymore.) After digging deeply through the Device Manager of my PC, I found an option that turns the USB port off after a while, to save power. That is where the connection goes away.
So, do the following:
1. Go to Device Manager;
2. Under Universal Serial Bus controllers find the USB Root Hub your phone is connected to (assuming you use a USB cable to connect);
3. Double click it and then go to the Power Management tab;
4. Uncheck the option "Allow the computer to turn off this device to save power."
5. Disconnect the phone, reconnect and proceed with NSU.
You should be able to update the phone successfully.
Good luck!So far the "Internal module error" problem seems to be connection related.
Make sure, you have the Nokia Cable Connectivity Cable driver installed (the later the version the better), if you are using a cable. You may check it out in the Control Panel->Add or Remove Programs.
You also make sure you enter the right Product Code when asked. The following link may help you clarify the fog around the firmware version number:
http://www.noeman.org/gsm/showthread.php?p=104254
It seems there are several versions. Check out the differences and upgrade only if you need it.
As for the USB, in Device Manager got to Universal Serial Bus controllers, and double click every USB Root Hub. On the Power tab you may see the all the devices connected to the specific USB port. Let me know, if you find something out. Cheers. -
Any ideas about interface problems on 2014.1.1?
On a fresh install of 2014.1.1 on a new macbook pro I am having interface problems. The Edge program locks up after a few minutes or the cursor won't show what's being selected, items disappear, sometimes get the "Save your work, error occurred" message and other odd interface behavior. Are there any known issues or likely culprits that might cause this sort of thing?
Thanks for jumping in. Yes, I've restored prefs and even uninstalled all (including prefs) and reinstalled. If it helps at all, I run several cloud apps (googledrive, dropbox, icloud, box, transporter, etc.). Other installed items include a Wacom tablet driver, latest Java, Flash player, Logitech mouse driver. Other than those the mac is brand new with no unusual system mods yet.
Appreciate any ideas. -
CU65 Variant Function cannot be released - check function module interface
Hi ,
Getting this error while Releasing the variant Function in CU66. Function Module trigerred by this function is of the same name as well as correctly acitvated and released , but while releasing the Function I get this error : 'Function cannot be released - check function module interface' . Following are two characeteristics that are maintained in the variant function :
1. Customer_Type
2. Maintenance_Contract
While executing the Function Module alone I get Raise Inernal Exception i.e it is not identifying the argument name 'Maintenance_Contract' in the FM 'CUOV_GET_FUNCTION_ARGUMENT' exception
Below is the code for reference . Pls point out if any mistakes :
""Local Interface:
*" IMPORTING
*" REFERENCE(GLOBALS) TYPE CUOV_00
*" CHANGING
*" REFERENCE(ZQUERY) TYPE ZQUERY
*" REFERENCE(ZMATCH) TYPE ZMATCH
*" EXCEPTIONS
*" FAIL
*" INTERNAL_ERROR
" Data Declaration
DATA : l_main LIKE CUOV_01-atwrt,
l_cust LIKE CUOV_01-atwrt.
" Get value of Input Characteristic Maintenance Contract
call function 'CUOV_GET_FUNCTION_ARGUMENT'
exporting
argument = 'MAINTENANCE_CONTRACT'
IMPORTING
SYM_VAL = l_main
tables
query = ZQUERY
EXCEPTIONS
ARG_NOT_FOUND = 1
if sy-subrc <> 0.
RAISE INTERNAL_ERROR.
endif.
" Get value of Input Characteristic Customer Type
call function 'CUOV_GET_FUNCTION_ARGUMENT'
exporting
argument = 'CUSTOMER_TYPE'
IMPORTING
SYM_VAL = l_cust
tables
query = ZQUERY
EXCEPTIONS
ARG_NOT_FOUND = 1
if sy-subrc <> 0.
RAISE INTERNAL_ERROR.
endif.
IF l_main EQ 'NO'.
IF l_cust EQ 'CURRENT'.
l_cust = 'NEW'.
ELSEIF l_cust EQ 'VAR CURRENT'.
l_cust = 'VAR NEW'.
ENDIF.
ENDIF.
" Set value for the output characteristic
call function 'CUOV_SET_FUNCTION_ARGUMENT'
exporting
argument = 'CUSTOMER_TYPE'
vtype = 'CHAR'
SYM_VAL = l_cust
NUM_VAL =
tables
match = ZMATCH
EXCEPTIONS
EXISTING_VALUE_REPLACED = 1ZMATCH and ZQUERY are two table types created in SE11 , both of type CUOV_01.
-
i dont know what the problem is everything else works my photoshop runs really well its just when i try to use magic bullet looks then it gives me the error message
Contact Red Giant and see if they have an update to the plugin that fixes the bugs in the plugin that are preventing it from working correctly.
Maybe you are looking for
-
Session creation at the time of Form Login
I enabled my session params to manage weblogic session management in Properties file. I'm using LDAP Realm as a Users/groups repository for credentials checking. I'm using form authentication(weblogic.servlet.security) API to check my credentials. He
-
Problem with spaces in filenames
Created a photo album in iPhoto and exported to iWeb. When I try to upload to my Comcast homepage, several graphics elements in the photo album page have spaces in their filenames and Comcast balks. Is there a way to keep iPhoto/iWeb from utilizing f
-
Can I export itunes files to windows media player?
itunes lets me import music tracks from my windows media player, but I can't seem to get itunes tracks to go the othe way, into my windows media player. I'd like to be able to do both, as sometimes I buy tracks online at MSN, and sometimes at itunes,
-
I'm a bit confused on how to do this. I have a non-tabular form which has various modes of operation. In one of them I need run a javascript function that checks a bunch of things. Input from the user may be required before this is completed and the
-
Mac Mini (late 2012) Ethernet Losing Connection
Problem: Throughout the day, my Mac Mini loses it's ethernet connection for several seconds. Using iStat Menus the network tab shows that the ethernet connection is "Yellow" for "Not Connected" and I don't have an IP from my router. The same thing is