Module locking - Maybe michecl can help me
Hello ALL,
I have question about EHP4 online module booking program and Maybe Michael give me some advice.
In my university some module like language ( Thai, English ) have lots of event package and in the SAP GUI module booking program lock from the module to event and EHP4 also locking module during booking i want to design differently.
I want to know in EHP4 online module booking program locking module during booking ?.
If not i am happy but if it is locking i must have many module rather than have many event package.
Hoping quick response and thanks in advance.
regards,
jin dal
Hi Prabhat Singh,
Thanks for your help but i have to explain a little more.
Of course, i will use time windows but the problem is some module like Language have about 30-50 event packages so whether i use time windows, if the Webdynpro module booking program locking module during booking time, i have to persuade customer to have many modules rather than have one module to avoid module locking.
In detail
Module name Thai language have for about 50 event package
if EHP4 online module booking program locking module during module booking
i want to change as follows.
Module name Thai language 01 - 50 and each module have only one event package
and it will be much better for system performance if webdynpro program locking module during module booking.
so my question is , Webdynpro module booking program locking module or event package level ?.
If module level, i think i must have many module rather one module but locking to event package level i will have only one module.
regards,
jin dal
Similar Messages
-
Maybe Someone can help me.....
Man konnte sehen, wenn dieser Seite hilft. Ich habe auch gesehen zu erwähnen, dass Clearing-Safari-Cache (Einstellungen > Safari > Cookies löschen und Daten oder Clear Cache, und Klare Geschichte).
Auch dem Schließen der App Store-App und macht einen Reset helfen könnte. Um den App Store app komplett zu schließen: von derHome-Bildschirm (also nicht mit dem App Store 'open' auf dem Bildschirm)Doppelklick auf die Home-Taste, um in der Taskleiste, und halten Sie danneine der Apps auf der Taskleiste für ein paar Sekunden oder so, bis sieschüttelte starten, drücken Sie die '-' in der Spitze der App Store App linksum es zu schließen, und tippen Sie einen Teil des Bildschirms über der Taskleiste, um das Zittern zu stoppen und in der Nähe der Taskleiste .
Zum Entriegeln: Drücken und halten Sie beide den Schlaf und Home Buttons für 10 bis 15 Sekunden (ignorieren Sie die rote Schieberegler), nach der das Apple-Logo angezeigt werden soll - nicht verlieren, jeden Inhalt, es ist das iPad entspricht einem Neustart.
You could see if this page helps. I've also seen it mentioned that clearing Safari's cache (Settings > Safari > Clear Cookies And Data or Clear Cache, and Clear History).
Also closing the App Store app and doing a reset might help. To close the App Store app completely : from the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
To reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
i am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk
Launch the Terminal app, copy & paste this command into the window that pops up, and hit the return key. At the Password: prompt, carefully enter your admin password, since nothing shows up on the screen, and hit the return key.
sudo chflags 0 /Volumes/
Then, copy & paste these next two, one at time, into the window and hit the return key after each:
sudo chmod a+rx /Volumes/*
killall Finder
Quit the Terminal app and try installing again. -
maybe you can help....I can receive mail fine, but when I open or delete emails from my iphone or computer, it will not sync with each other....so I have 600 emails on my iphone and 100 on my computer..I have looked at everything I can think of
I don't know about the systems, but is your phone on wireless and your other device on wireless? Then I think they would mutually update.
Howerver the previous response from ckuan sounds much more informed so I would check that out. -
when i try to copy or paste text online by buttons its not works,maybe somebody can help me please…..:)
Resetting SMC may help. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
Maybe someone can help me, it would be greatly appriciated. The first Apple ID I created was fine,until I entered a credit card with a low balance. Now I can't upgrade apps, or even d/l free apps.
Contact iTunes store support and pay what you owe.
-
HT1386 my ipad display locked my u can help me
hello i have one problem with my ipad3 my child is use wrong password and now my ipad3 display locked and now show in the display connect to iTunes i am connected but not help me plz u can help me i am waiting soon as possible
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts -
I can't email apple on this, but maybe you can help, compressor wont start
This is a long letter I composed to send to apple about my compressor problems. I am having issues here in this paper, file:///Users/nelsonmay/Desktop/Compressor:%20Troubleshooting%20basics.webarchiv e but I have files missing even after 3 installs. Compressor works fine under another user name and I was told to migrate everything over to that new account, but the tech on apple phone support didnt' want to tell me how. I still have about 40 days of phone support on this software FCP6, but didn't get much on the phone. If you have the time to read though this and can help me with either getting compressor to install on my current user account or help me migrate over to my new one, I can go on and start working with this G5 again. If anyone can forward this onto apple, I would appreciate it.
Here is my initial problem and why I called tech support.
compressor would start, and I had the toolbar, but I couldn’t start a batch or open a file. When I tried to close compressor it said files were in the queue.
I am writing with a real problem with my compressor software. I called tech support 4/7/09 and didn’t get a lot of help. I was essentially told to create another account on my mac to see if compressor was on the other account. I was also told to migrate over to that other account. I tried to ask for more support, but the tech just kept saying I need this paper to follow. file:///Users/nelsonmay/Desktop/Compressor:%20Troubleshooting%20basics.webarchiv e
He also said that I could just reinstall compressor and everything would be OK. I logged to the new account I created on while on the phone and got compressor to start. I thought I was good, and since I didn’t feel I was getting support ( I asked to be walked through the process) I hope compressor would run. Later I tried to run a file on compressor – the new account I created, and go an error. I thought the next step was to go though the paper and reinstall compressor.
First I made sure the permissions were correct. Then I removed the user preferences, but I did not find this file com.apple.compressor.Compressor.plist. I decided to proceed thinking I may be able to get a clean install. The following files were missing and still are.
these files are missing
/Library/Application Support/Apple Qmaster (the folder)
/Library/Frameworks/AECore.framework - I have the frameworks folder but it is empty
/Library/Frameworks/Compressor.framework - I have the frameworks folder but it is empty
/Library/Frameworks/MediaServerAPI.framework - I have the frameworks folder but it is empty
/Library/Frameworks/Qmaster.framework- I have the frameworks folder but it is empty
I have the frameworks folder but it is empty
/Library/Logs/Qmaster (the folder) – no qmaster
/Library/PreferencePanes/Apple Qmaster.prefPane I apple q master
/Library/Receipts/Compressor.pkg – no receipts folder
/Library/Receipts/ProMediaIO.pkg – no receipts folder
/Library/Receipts/Qmaster.pkg – no receipts folder
/Library/Receipts/Qmaster_Frameworks.pkg – no receipts folder
Again I went on with the remove and also removed motion like the paper said. When I tried to reinstall compressor from the FCP disc, it wanted the soundtrack discs and the live type discs. I though this was a bit much for having to install just compressor and motion.
OK, so after an hour of installing all the required discs, I did the software update and compressor would start, and I had the toolbar, but I couldn’t start a batch or open a file. When I tried to close compressor it said files were in the queue. Now when I logged out and logged on to the new account the tech had me create, compressor worked fine this time…under a different user account.
So this is what I need from you guys. I have been scouring the apple help and support pages asking for someone to help me migrate all my data and preferences from my user account to the one the tech had me create. I can’t find a thing on it and no one is answering my questions. I feel that isn’t possible.
Now I can go on, but this isn’t a very good option. I can save files from Motion, FCP etc, log out and log onto my new user account to use compressor. I would rather not do that. I like to export to compressor and make multiple files for different .
OK,
1. I need to fix compressor under my user account that I have had for 4 years on this G5
2. I need to be able to migrate to the new account I created and be able to have all my permissions as well as access to all data and other computers on my network. I also need to be able to log into this account on start up.Usually they are good about support when you are under warranty. I have some time left on this software. I was just really surprised to get pushed to a white paper so fast and told, "to fix it myself". I have to give the guy credit, he did help me make another user account, but he just told me to migrate my data, and didn't tell me how when I said that I wasnt' sure how to do it.
FCP, is the problem on my system, not OSX. OSX didn't cause the issues in the first place. I also tried the compressor repair on numerous occasions and it didn't work. i am missing files on the install.....after three installs, I would think they would be there. That machine runs fine. Runs AE CS3, DVD Studio and HD on FCP without a hitch. Compressor is messing things up! -
Maybe someone can help me on one of these issues
i just felt like sending a VERY long rant to apple through the itunes feed back. so if someone believes they could help me, please take a few minutes to read this. i have just copied and pasted it.
*SIDENOTE* I i have erased all itunes program files between unintstall and reinstall. i only kept music, pictures, videos, and apps when i did a super-erase-and-install of the latest itunes.
i have the newest iTunes software. my music used to be in iTunes media>music folder, now all of a sudden, the "music folder is gone, and all the artist folders are mixed with "automatically add to iTunes, downloads, tones, podcasts, and TV shows" folders. and the "mobile applications" folder is in the "iTunes folder" which lies outside of the "iTunes media folder.
(This has all come up since ios 5 BTW) ITUNES MATCH SHOULD NOT BE YOUR ONLY CONCERN
ALSO i own 1854 songs, and when i try to manually manage music and videos for my iPhone 4 with ALL THE LATEST SOFTWARE, iTunes will not let me manage my music because it believes i have 26.9 GB and 3210 songs on my phone, and i only have 1854 songs as i mentioned before.
ALSO smart playlists do not work on my phone that are made in iTunes, no matter what i set for a smart play list, all the songs within the playlist are shuffled no matter what i do.
ALSO, mail does not push from my two YAHOO email addresses. It only pushes my @me.com address.
ALSO i can no longer download media passes from the iTunes store on my iPhone, my only way of fixing this is to buy the pass on my computer, and i have to wait till the **** episodes are available in "purchased TV" episodes in the iCloud instead of them being available to download on my phone when they are available.
ALSO, iCloud is supposed to backup my iPhone at night when it's charging, locked, and not in use right?? then why the **** does it never do that and it always says it's last backup was when i manually backed it up the previous Sunday night.
all i have left to say is, whoever the **** "Tim Cook" is, needs to whip you people into shape and get your **** together before you lose this company again. Steve jobs isn't going to save you this time.. and i will mention I'm only 20 years old so i don't have any clue what your company's history was like before the iPod touch. i started buying apple products when the iTouch 2nd gen came out.
if you guys keep up with this ****** software management, I'll find myself using whatever the newest DROID is 18 months from now after my 2 year contract with AT&T.
Written from my iPhone 615-xxx-xxxxPGTHORNTON,
re your battery. Please have a look at the thread Notebook battery is not getting re-charged paying special attention to Mark's post here. As your Notebook is within the 1 year guarantee you should have no problems getting a replacement.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
My HTC Droid Eris rant, maybe you can help, maybe someone with some power will read
Alright I've got a new HTC Droid on the way, for the next 2 days I have a phone I can use the internet and check my email on, but the most basic cell phone functions I can no longer use, send/receive both calls and messages.
I'll get into the problems that lead me to do a hard reset on my phone today later, we'll start there.
So I've read about doing a hard reset and how it fixes a lot of problems. So I prepared today not knowing what would happen really. Backed up my photos and contacts and had at it. Turns out I didn't need to back those up.
So everything goes alright, it calls Verizon to activate my phone, says everything went fine. No calls or text messaging. But I've got internet and gmail. I get an error message when trying to send texts, and I get a verizon recording saying "We can't authenticate your phone."
Take it in to the Verizon store, they can't figure it out either, so they order me a new phone.
The greeter gal was the most helpful really, she asked me if I did a *228, I didn't know what it was cause the phone called to activate by itself. So later I tried that wondering if it was something different. I tried the second option activating roaming. Didn't work.
So right now as I'm typing this I got the battery out, we'll see if that works.
Alright here's my laundry list of complaints:
It's slow, even for the most basic things like making a call or text messaging. I understand it's not a very fast processor compared to other phones but for basic things it shouldn't struggle. Hell even the calculator lags.
The messaging program sucks. Well since the update I see they finally made it so it can play animated gifs. But where to begin with this, well first you can't delete messages. It locks up. Second if you don't want to delete a whole thread, you can't go through and select all the ones you want to delete, and mass delete, no you have to hold down everyone you want to delete, till the screen pops up, click delete, wait, and go to the next one.
If that wasn't time consuming enough, wait till you get a picture message with multiple attachments. No it can't play it like regular phones, this is a droid dammit! We have to be innovative and make it so you click on the attachments button, and it brings up a screen that lists all the attachments! Then when you find the one you want, you can't simply just click it to view it, no we give you another pop up that gives you options, to view, or save the attachment! I mean regular phones you could save the attachments while you're viewing them, but droid gives you options before hand, then after all the lag to load and exit the attachment, you get to start all over to look at the next one! (Handcent fixed a lot of the problems I had with the messaging but it loses multiple attachments so I end up going back to regular messaging to look at them)
Gmail on your phone! Only thing that sucks about this is google saves every person you have correspondence with through gmail as a friggin contact. At least I can delete them off my phone, time consuming and annoying, I still haven't figured out how to delete them off actual gmail.
Facebook! Hey if google contacts wasn't bad enough, in this connected day and age, when you type in a name to call or send a text message to, it searches facebook friends too! And its really fun when your friends have old numbers listed on their facebook account and you call it and it's some 80 year old guy named herbert who says he'll dress in pig tails and be Jessica if I want.
I use Gmail, I use Facebook, but I do not need these to be a part of my contacts for my calling and texting in any way!
The silent phone issues. Mine has gotten worse lately.
The one thing I didn't mind, the browser, well attention is in the details, and they made one thing super annoying now. I liked browsing craigslist on my phone, most browsers for computers, you click the back button, it returns you to the point in the page you were at, oh no, not droid, it takes you to some point in the page it feels like going back to when you click back. Which is annoying when you're zoomed in trying to go down a list. Either fix this or make it so you can just open links in new tabs.
I've been searching online for solutions to these problems if you got any please fill me in. And before I send this, I put the battery back in, booted it up, still not able to make calls or send messages.Firstly, your device authentication issue has absolutely nothing to do with your device. Even a Knack can get that error. In a nutshell, your device authenitication needs to be updated and a quick call to tech support can fix that. It takes 35 seconds to resolve that issue once you get through.
Second, need some tissues? The Eris is an entry level phone. Don't like the included messaging app? Download Handcent. Or Chomp. You are really being overly whiney and will probably not be happy with another Droid device either. All devices need some set up, optimization, and guess what, basic user knowledge. Sounds like you never even bothered to crack the manual or seek out help.
And yes, I do own an Eris. -
Having a major problem in windows...maybe someone can help?
I normally wouldn't ask a windows question here, but I don't know where to turn for this one.
My Macbook is less than a month old, base model. I'm running Windows XP home. I keep getting a windows stop error, and can't for the life of me figure out why. I'm getting stop error 000000ea, which is "THREADSTUCK_IN_DEVICEDRIVER". I've tried all the standard stuff, reinstalling programs, operating systems, drivers...you name it. I've tried the latest drivers...older drivers...you name it. This is my second Macbook, and while my first one had some major issues, it wasn't doing this, and I'm not doing anything different. It hasn't acted funny in Leopard, but the fact that it's frequently doing it in Windows...which I kind of need to run...is quite worrysome. I'm told it's either a hardware problem, or a driver problem. Specifically this happens when I'm playing games, but I'm not running anything that would really push the system's limits. It's done it while not running games, though, so I'm not ready to blame that. I upgraded the RAM to 2gb of Corsair RAM, and have since ran a good number of RAM tests to make sure there isn't a problem with one of the sticks. That's grasping at straws, though, just assuming that since video ram is shared that maybe it could be connected. This is a brand new machine, and I'm barely past my 2 week exhange period...I really hope this isn't a hardware problem.Hi,
That Windows stop code indicates that video hardware is being initialized, but never achieves a state of readiness, thus the thread executing the driver code never returns to the calling process.
I looked on www.techbible.com, and they suggest a problem with the hardware is a probable cause. Of course, it could be due to an incorrect driver too. See if you can start Windows in safe mode or VGA mode. The older MacBooks have GMA-950 video, while newer MacBooks have X3100 video. Be sure you're installing the right driver. Be sure the MacBook EFI and SMC code is up to date too.
I'm running Vista on a GMA-950 MacBook, and Vista pretty much detected all the Mac hardware, except for the iSight camera. Since XP is older, it definitely needs the Boot Camp driver disc for many hardware drivers.
Bill
Bill -
Solved my iPhone 5 Battery Problems: Maybe it can help you!
Hi every one, I saw many topics regarding battery problems with the iPhone 5. I responded to one discussion describing what I did to solve the iPhone 5 battery dying fast on me. So I thought I'd make a discussion here to help out other users with the same problem.
I would have 25-30% drop with in the hour and all I did was text a couple of my friends. I was using an iPhone 4 for the longest time, and on that phone I was able to watch videos, listen to music and use all the other features of the phone. The battery still lasted me the whole day, I was getting worried that I wouldn't be able to use the iPhone 5 the same with out it dying on me fast.
My friend suggested draining the battery and then charging the phone to see if any improvements were seen. I did that and I saw a small change in the battery strength. I drained the battery two more times, and that is when I saw a huge difference.
I use my Phone as my iPod when I work out, and I run continuous music on it for 1.5-2 hours straight, along with sending texts to my friends. In this duration I would only use 15-20% which was a huge improvement from before. I would say that the battery life was on par with my iPhone 4 battery! It is such a relief, now I can use my iPhone 5 to it's fullest potential without having to worry it'll die on me fast.
I recommend other iPhone 5 users try draining their batteries a couple of times before charging as well if they are experiencing problems.
Hope this helps!
DylanI would let the battery completely die before I would charge it again. I would keep 3g off and only turn it on if I'm going to use it and turn it off again. Because the phone uses more power for the 3g/4g that the battery dies even faster.
I text a lot to friends so I'm constantly texting through out the day and when I work out continously run music on it for close to 2hours. It would only drain 15-20% of the battery, which really is a huge improvement.
I also use Siri quite often through wifi and it barely uses any battery power. Try letting the phone die until it turns off a couple of times before you charge it. That is what I did before a friend requested doing that after I was getting fraustrated with the battery power. -
Serious trouble with new iPod - maybe you can help?
Please help if you can. 15 hours into troubleshooting this and I am desperate!!!
I just purchased a new 5th-gen, 60GB ipod. I already have a 1st gen, 10GB iPod. My old iPod is presently working great with no problems.
The new iPod, however, is not being recognized by my computer or by iTunes. And when I try to plug it in, iTunes freaks. It will stop playing music and freeze on me.
Here is what happened:
1. I knew I had the latest iTunes & iPod software on my computer, so rather than running the CD that came with the iPod, I just plugged in the iPod.
2. When I did so, the computer recognized it as a new device and attempted to (I assume - not sure) install a driver for a while. This went on for about an hour, something seemed wrong, so I disconnected the iPod.
3. At this point, connecting it always has the same behavior. It flashes "don't disconnect". ITunes freezes. Windows Explorer does not recognize or acknowledge its existence.
Here is what I have tried to do:
1. I first tried installing from the CD. This installed an older version of iTunes on my computer. This did not help matters and stopped my current iPod from working.
2. I troubleshooted this and managed to fix my old iPod by uninstalled all iTunes and iPod versions from my computer and reinstalling all of the latest bits.
3. I have doublechecked my USB ports to ensure they are USB 2.0.
4. I have tried restarting my iPod in file mode to see if the computer will recognize it then. No dice.
5. I have tried an iPod reboot, obviously.
6. I have restarted my computer innumerable times.
My gut says this is a driver issue, but I'm not remotely qualified to troubleshoot that. Can anyone help?
gateway Windows XPHey, I've got a few questions for you. 1. What kind of computer are you using? (ie: laptop, desktop, whatever else there is..) 2. Have you ever had the 5th Gen. working on you're computer? 3. Have you tried you're 5th Gen. on another computer which, in the past, has detected an iPod?
Done with questions for now I believe. Here's my story. My girlfriend got her iPod (5th Gen.) in April and right when she got it, she hurried over to my house because she's "technologically incompetant". Booted up my Alienware (now an artifact after being purchased new around 1998-2000) and installed all the gadgets just like the instructions said. After finishing all that, I slapped the iPod into a USB2.0 port and WindowsXP detected, found, and installed the driver for the iPod. I used iTunes to put about 500MB's of songs on there then sent her off with her new WORKING (at the moment) iPod. A few weeks later, I guess when she killed the battery, she tells me that her iPod isnt working.
Long story short...
She's using a brand new Dell Inspiron [some number and letters here] laptop computer with WindowsXP.
I did everything exactly as you had described in your first post. Few things are different, her computer has never detected the iPod, WindowsXP never found or installed a driver. When her iPod is plugged into her computer, the iPod either brings up a little battry with a lightening bolt (like it's charging) or brings up the "Do Not Disconnect" screen. After a few hours of leaving it like that and I unplug the iPod, it hastn't gained any charge. I checked to make sure everything, ie: plug and play, were all working correctly and all that good stuff; however, one thing phases me. I took her iPod back to my house and tried it on the computer that had the player working before. After a minute of plugging it in, it was detected and I could add or remove songs using iTunes, in other words: IT WAS WORKING.
I would like to see some kind of solution to our problem (which I believe to be the same) so that I don't have to drive an hour away to the only iPod (Mac) store around to replace it (luckily it is still on the warranty).
If you make any progress, please let me know.
Thanks.
Windows XP
Windows XP -
Having difficulty reading data file and doing analysis, maybe DIAdem can help
Hello,
I am new to DIAdem but I think it may be helpful to my application.
I used Write Labview Measurement File VI with n-signals input to generate a data file containing 2*n columns(time column and data column iteratively). Now I need to do data analysis from the file. I'd tried to use Read Labview Measurement File VI to load the data but didn't work. I found that it can only read file with one signal as input and without file header. But why?
What I want to do is to extract specific columns from the file. Some column has special flag values which divide the column into sections. I also need to extract these sections from the column and plot each of them. I know this can be easily done on other data analysis software but is there any way I can do it on Labview? Can DIAdem help with this?
Thank youHello,
To answer your last question first, DIAdem can certainly help. You can open the TDM file you created with the Write LabVIEW Measurement File VI with DIAdem. If you navigate to the TDM file in the External Data window of DIAdem NAVIGATOR, you can drag and drop the file into the Data Portal and use the channels of data at will.
You can also right-click on the file in the External Data window and choose Selective Opening…. There is a Help button in the Selective Opening window which will tell you more about using this feature.
Either way, once your data is in the Data Portal, you can use the DIAdem ANALYSIS to perform a wide range of analysis on your data. For more on the capabilities of DIAdem, I recommend starting at NI DIAdem.
Now, in regards to using the LabVIEW to access the data in your TDM file, this is also possible. If you are using LabVIEW 7.1, you will want to look at the Read Channel Groups example. This example uses a sequence of VIs from the Functions>>All Functions>>FileI/O>>Storage palette. The example demonstrates reading multiple channels from a TDM file.
Regards,
Eric M -
OK heres the deal. I have never used Java before, however I am experienced in a number of other programming languages such as Actionscript and PHP. I need to create a Java app that will open up an Oracle database and check its consistency with a Sequel Server database. If they are not consistent it needs to send an email to a specified address. Is thispossible and where should I start?
Its possible.
What do you mean by consistency? The data/tables in the two? Maybe theres a better way than Java - an existing tool, sql scripts etc.
If you do do it in java, I'd have objects for reading in the oracle, objects for the sql server, and then a controller object to compare the data. Then, yet another object for email, which the controller object can call if it needs to.
I'd certainly do each bit as a separate object, and test each bit separately e.g. write something to read the data from oracle and as a test print it to a file, write another object for sending emails etc, and when they work put them together.
Maybe you are looking for
-
Bonjour à tous, J'écris pour solliciter une aide car je dois recupérer avec Labview des données délivrées par un autocollérateur via la port série ( RS232). Sera la bienvenue, des sites, des cours, des codes ds d'autres langages, tout ce qui peut
-
How to disable Copy/Paste to a field in Siebel 7.8
Hi Gurus, Is there a way to disable paste into a certain field in Siebel 7.8?There is a way to do that in normal HTML but is it possible in Siebel.
-
Aiuto di Bridge | Utilizzare i metadati in Adobe Bridge
Questa domanda è stata pubblicata in risposta al seguente articolo: http://helpx.adobe.com/it/bridge/using/metadata-adobe-bridge.html
-
In my 2013 Honda Civic Si, I'm trying to use the SMS Text Message Function, but keep getting the error message, "Unsupported Device". I use an iPhone 5 with latest iOS 6.1.4. HandsFreeLink works perfectly fine with my iPhone for voice calls and for s
-
How can I convert the attribut lastLogon ...
Hi, How can I convert the attribut lastLogon on an Active Directory Microsoft? Attributes ar = ctx.getAttributes(dn, attrs); if (ar != null) { for (int i=0; i<attrs.length; i++) { Attribute attr = ar.get(attrs); if (attr != null) { String values="";