Module pool / Screen Prog is there any standard SAP functionality ?

Hi I am creating a Module pool / Screen Prog. On this screen I have nearly 100 fileds , now I want to take print out of all the information shown on the screen for the same is there any standard SAP functionality ?
Does SAP provides any standarar ready made functionality for the same. ?

No, there is no standard functionality for this. dynpros are not designed to "print out". This is what list displays are for. That said, you will need to write your logic to kick off a list display with all of your field values there, then the user can print.
Regards,
Rich Heilman

Similar Messages

Is there any standard SAP table which stores the license number assigned to a delivery item

Hi Experts,
This is in relation to license number assigned to a delivery item under ‘Export License Log’. Our scenario is for delivery of type NLCC created for an inter-company stock transport order. (i.e.not a sales order case where the license may get copied from sales order to delivery through copy control)
As we understand, for legal control – relevant scenarios, export license for each item shall be determined afresh every time the delivery is accessed. (Depending on legal regulation, grouping, destination country, export control class, delivery partners vis-à-vis license master customer assignments etc.)
To print the license text on one of the delivery output types, we want to access the license number for each item. (determined under export license log)
Our question is: is there any standard SAP table which stores the license number assigned to a delivery item?
We have checked some of the license tables (T606*, VAEX, EMXX etc.) but couldn’t get any specific table storing delivery-item-specific license data.
Helpful answers Text Removed
Regards,
Jagan
Message was edited by: G Lakshmipathi
Dont add such text in your post

Hi Lakshmipathi,
The export control log can be accessed by going to delivery Extras-> Export license log
We need a table that stores the determined license for each item in a delivery document ( as shown in the below screenshot)
Regards,
Jagan

Is there any standard SAP report to see all active,inactive, retiree employ

SAP experts
Is there any standard SAP report where I can look all the employees whose employment specific status is 0 (terminated), 1(employee with the company but inactive), 2(retiree), 3(active).
please help
regards
renu

Hi Experts,
I had a similar requirement and I used S_PH9_46000223 Report for my need as suggested.
I observed one thing.
"If I give Selection Date as "Today" then the entry date column is 00.00.0000"
Can anyone clarify my doubt? it is happening in same way for other similar standard reports as well.
Doubts
1) Why this is happening
2) Is it happening as it should? Whats the reason
3) is there any functional/technical way to correct or modify
Regards

Is there any standard sap package which contains examples of web dynpro

Hi experts, Is there any standard sap package which contains examples of web dynpro.

Hi Jrockman,
SWDP_DEMO_TUTORIALS package also contains some demo web dynpro components. There are many standard wd component which you can refer, all of them start with the name WDR, so you can also serach for components starting with name WDR_*.
I hope it helps.
Regards
Arjun

Are there any standard SAP reports to filter all BP(in SAP ISU)?

Hi All,
1.Do we have any standard SAP reports to filter all BP(in SAP IU)?I am aware that we can view all the Business Partners in Change/Display mode in the selection screen, but do we have any standard SAP reports to view all the created BP?
2.Do we have any standard report to filter BP(in SAP ISU)? based on certain fields like Authorisation Group?
Look forward to any responses.
Regards
Amitav Otta

Hi Amitav
Every industry has its own set of information for each kind of industry.There are certain data which is common to all Business Partner through out all industry. Most of that you can find in BUT000 and using SE16 you can generate a report directly through the Table access. But if you are looking for Standard Report than SAP has not provided standard Report for All Industry. If you look to the SAP Menu->Information System->General Report Selection, you will find that industries like Real State Management have reports for their Business Partner. To my knowledge there is no standard consolidated report to list down business partner based on filter for all industry.
Regards
Mithlesh

Is there any Standard SAP Report?for displaying Billing block/Status-Order

Hi,
Am a ABAP Developer. I heard that there is SAP Query/ABAP Query/Standard SAP report for the below functionality/requirement. SO, pls. let me know if there is any SAP Query/ABAP Query/Standard SAP report?
"This report is suppose to display Credit and Debit memo documents which are blocked and yet has a status of APRV; the other display is for Return Documents which are blocked and yet has a status RCVD."
thanq

Hi,
Use t-code
V23 - Blocked sales document for billing
VA14L - Sales document blocked for delivery
VFX3 - For blocked billing documents.
Kapil
Edited by: Kapildev Farakte on Jan 8, 2010 4:15 AM

How to create select-options on module pool screen

Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.

hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks.

Greatest of n numbers-any sandard SAP function

Normally u find the greatest of n number by using the <,> options . Are there any standard SAP function which will do it.

HI,
Why not moving thse fields into an internal table for each record?
loop at itab.
clear v_num.
perform find_biggest using itab-field1 itab-field2 itab-fields changing v_num.
endloop.
form fin_biggest using .....
data: begin of it_temp occurs 0,
data type <type for any one of the fieldsoof itab>,
end of it_temp.
it_temp-data = itab-field1.
append it_temp.
it_temp-data = itab-field2.
append it_temp.
it_temp-data = itab-field3.
append it_temp.
sort it_temp by data descending.
read table it_temp index 1.
v_num = it_temp-data.
endform.
REgards,
Ravi

Display Continuous Fluctuations in Input Data in Module Pool Screen

Dear All,
We are working on a Weighbridge Interface scenario, where the weighbridge is sending data to a digitizer, which is connected to the COM port of a PC. The objective is to read the data from the digitizer, and display in a Module pool screen. However, there is one more requirement: the weight may fluctuate until it stabilizes, and the fluctuations have to be displayed on screen. For example, the tare weight of a vehicle may be 12.4 TON, but when the vehicle is standing on the weighbridge, the weight may vary from 10.4 to 12.4 TON. The idea is to capture the stable weight, so that any discrepancies can be avoided. In the current IT system implementation, the fluctuations in the weight are displayed. But using ABAP, can these fluctuations be captured? For example, we may design a screen containing a field for capturing the weight, and the weight displayed there automatically refreshes as soon as there is a change in the digitizer reading. Is this possible to achieve? If so, how?
Awaiting answers.
Thanks and Regards,
Sid

Hi Sid,
just a suggestion for the refreshing of an ABAP screen: you can use class CL_GUI_TIMER, but it only handles whole seconds, i.e. 1 second, 2 seconds and so on, but not 0.5 seconds...
An example of an ABAP listing could be the following:
*& Report ZZAVV001
REPORT zzavv001 NO STANDARD PAGE HEADING.
CONSTANTS: c_yes(1) TYPE c VALUE 'X'.
DATA: BEGIN OF t_bseg OCCURS 0.
        INCLUDE STRUCTURE bseg.
DATA: END OF t_bseg.
data: d_num_bkpf type i,
      d_num_bseg type i.
PARAMETERS: interval TYPE i DEFAULT 5. "meaning 5 seconds
*       CLASS lcl_receiver DEFINITION
CLASS lcl_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
      handle_finished FOR EVENT finished OF cl_gui_timer.
ENDCLASS.                    "lcl_receiver DEFINITION
* Global data
DATA:
test       TYPE i,
receiver   TYPE REF TO lcl_receiver,
timer      TYPE REF TO cl_gui_timer.
START-OF-SELECTION.
CREATE OBJECT timer.
CREATE OBJECT receiver.
SET HANDLER receiver->handle_finished FOR timer.
timer->interval = interval.
CALL METHOD timer->run.
PERFORM load_data.   "or whatever you have to do to read the weight
PERFORM show_list.   "or whatever you have to do to print the weight you've read
*       CLASS lcl_receiver IMPLEMENTATION
CLASS lcl_receiver IMPLEMENTATION.
METHOD handle_finished.
    PERFORM carga_datos.
    PERFORM muestra_listado.
    CALL METHOD timer->run.
ENDMETHOD.                    "handle_finished
ENDCLASS.                    "lcl_receiver IMPLEMENTATION
*&      Form load_data
*       text
FORM load_data.
clear: d_num_bkpf,
         d_num_bseg.
select single count( * )
    into d_num_bkpf
    from bkpf.
select single count( * )
    into d_num_bseg
    from bseg.
ENDFORM.                    "load_data
*&      Form show_list
*       text
FORM show_list.
get time.
skip to line 1.
position 1.
write: / 'Date / Time:', sy-datum, sy-uzeit.
write: / 'Number of BKPF records:', d_num_bkpf.
write: / 'Number of BSEG records:', d_num_bseg.
ENDFORM.                    " show_list
Okay, it's just a tiny code snippet, but I hope it may help you by designing auto-refreshing screens.
Kind regards,
Alvaro

Is there any standard Adhoc query to get the Previous employers list

Hi Experts,
Is there any standard Sap Adhoc query available to get the details of Previous empoyers list.
Please advice me to get the list of employees with their previous employers..
Thank you very much.
Regards,
Vishnu.

Hi Vishnu,
U could go as per wat Suhasini has said. But if u want the end user to view this report time and again, then u need to create a query.
The steps are as follows:
1) T-code: SQVI
2) Qucik View: give some name here and then click on "Create"
3) You will get a "Create Quick View" screen.
4) Goto "Datasource" and select "Logical Database" from the drop down
5) Then goto "Tableview" and enter "PNCPE" and click on enter.
6) A screen pops up and click on the Infotypes u would want to extract the data from and press enter.
7) Now, u would get the following screen "Qucik Viewer: Initial screen". Here u can see coulple of tabs.
8) Goto the tab "List selcted field" and select watever fileds u want in the output screen and then press "Execute".
Hope this would solve ur issue.
Thanks

Is there Any Standard Function Module that populates mail in SAP inbox

Hello Experts,
The scenario that we are working is , Email Integration in SOLMAN.That is the done using XI , first the mails raised for Support Desk issues from Outlook are read and collected in XI ,now the requirement is from XI we have to populate the mails into SOLMAN's Inbox. So is there any standard FM that can be used in XI for this purpose.
Or is there any other way in which the mails can come into Solman's Inbox,If someone has worked on this , please give me your valuable suggestions ASAP.
Thanks & Regards,
Mohana

Hi deepak,
1. we can use the FM
DATE_CHECK_PLAUSIBILITY
regards,
amit m.

Assigning 2 fields of same table in Module pool screen

Hi,
I want to assign similar fields of table in module pool screen.
In one case i directly use the tablename-fieldname and in other case when i try doing the same i get error. I know that this is not possible.
Is there any way to get around this. The field i am referring to is attached to a custom domain which is having defined fields. In the second assignment i need to retreive the values of the domain and display it in dropdown mode so that the users are able to select it.
Regards,
Imran

The domain only attached with this field?check the same domain attached to any other field and insert that field in the screen.
shibu
reward if helpful

Module-pool screen field value under POV event

Hi All,
I have one issue...please suggest me solution for this.
In module-pool program i have one screen(1000) which has one field(hrname_1000).
Under this event:
PROCESS ON VALUE-REQUEST.
FIELD hrname_1000 MODULE hrname_1000.
under this module hename_1000 i have used F4IF_INT_TABLE_VALUE_REQUEST to put a search help for field hrname_1000.
after that i am trying to retrive HR related stuff's based on the field on module-pool i.e i am using hrname_1000 in the where condition.
but problem is that im not getting value for hrname_1000 which im giving in the module-pool screen.
thats y my select query is not working.
Where as im getting values for the hrname_1000 under PBO & PAI.
It will look like below.
PROCESS ON VALUE-REQUEST.
FIELD hrname_1000 MODULE hrname_1000.
(under the above module)
SELECT DISTINCT ename plans FROM pa0001 INTO CORRESPONDING FIELDS OF TABLE itab WHERE stell = '50001026'.
      LOOP AT itab INTO wa WHERE ename = hrname_1000.
      ENDLOOP.
Please suggest
Thanks & regards
Ansumesh

In some of the cases the screen field is present in the screen but not holding the value in the required structure or field.
so here u need to check the option of reading the screen field values explictly..
//once u hit an enter and do the f4 i think the value will be there ...but if u dont hit enter and do an F4 the value cannot hold and i think u r in this case ..
1.Fill the screen field name in the structure dynpread.
DATA: BEGIN OF DYNP_VALUES OCCURS 10.
        INCLUDE STRUCTURE DYNPREAD.
DATA: END   OF DYNP_VALUES.
DYNP_VALUES-FIELDNAME = 'HRNAME_1000'.
APPEND DYNP_VALUES.
* read screen values
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      DYNAME     = HELP_REPID "call the repid of ur prog
      DYNUMB     = HELP_DYNNR "pass the screen number
    TABLES
      DYNPFIELDS = DYNP_VALUES
    EXCEPTIONS
      OTHERS     = 1.
now dynp_values hold the field name and field value of the screen .
now
SORT DYNP_VALUES BY FIELDNAME.
    READ TABLE DYNP_VALUES WITH KEY 'HRNAME_1000' BINARY SEARCH.
    IF SY-SUBRC EQ 0.
      HELP_XXXX = DYNP_VALUES-FIELDVALUE. "store the value into a variable
      TRANSLATE HELP_XXXX TO UPPER CASE.
    ENDIF.
Now check the code with the value if its getting populated which once there will make ur select work ..
Vijay..

Selct Options in Module Pool screen.......

Hi Gurus,
We know the way to get the Select options on the Module -Pool screen as follows....
Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
I have tried the same as a test run for the FM. .but not returning meaningfull range......
Can any 1 clerify where the code containing the FM has to be included in the Screen flow (inside PAI, PBO or else) to get the range which can further be used inside the code for database selections or else..... .
Secondly, how is the inserted icon populated and used while coding........????
Thanks And Regards,
Abhi........

Hi
Please find the below code u will get select options
dont create any screen fitst jus type of prog is 'M' and create a tcode with 100 screen
than execute u will get select options
TABLES:VBAP.
SELECTION-SCREEN BEGIN OF SCREEN 100 .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS S_VBELN FOR VBAP-VBELN.
PARAMETER P_WERKS LIKE VBAP-WERKS.
SELECT-OPTIONS S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN END OF SCREEN 100.
Regards
Surendra

Make fields invisible based on selection in module pool screen

I have a several fields in my module pool screen.
There i have a box called Ref Obj.
Inside the box i have fields a b c d e f.
suppose my input has parameter 1.
I need to show only fielda a and b inside the box
suppose my input has parameter 2.
I need to show only fielda c and d inside the box
suppose my input has parameter 3.
I need to show only fielda e and f inside the box
suppose my input has parameter 4.
I should not show any fields and box should be invisible.
I would appreciate if any one could help me regarding this
Thanks in advance

hi,
go through this code, and make the required changes according to u'r requirement but the logic is same.
TABLES: mara , lfa1.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_matnr LIKE mara-matnr DEFAULT 'M633640000' MODIF ID m1,
            p_ersda LIKE mara-ersda DEFAULT '30.06.2004' MODIF ID m2,
            p_aenam LIKE mara-aenam DEFAULT 'DOVIND' MODIF ID m3,
            p_matkl LIKE mara-matkl DEFAULT '0000' MODIF ID m4,
            p_meins LIKE mara-meins DEFAULT 'ST' MODIF ID m5,
            p_mbrsh LIKE mara-mbrsh DEFAULT 'M' MODIF ID m6,
            p_vpsta LIKE mara-vpsta DEFAULT 'KV' MODIF ID m7.
SELECTION-SCREEN: END OF BLOCK b1.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p_lifnr LIKE lfa1-lifnr DEFAULT 5070001063 MODIF ID s1 ,
            p_land1 LIKE lfa1-land1 DEFAULT 'FR' MODIF ID s1,
            p_name1 LIKE lfa1-name1 DEFAULT 'HONDA' MODIF ID s3,
            p_ort01 LIKE lfa1-ort01 DEFAULT 'PARIS' MODIF ID s4.
SELECTION-SCREEN: END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'M1' .
      screen-input = 0.
      MODIFY SCREEN.
    ELSE.
      IF screen-group1 = 'M2' .
        screen-invisible = 1.
        MODIFY SCREEN.
      ELSE.
        IF screen-group1 = 'M3' .
          screen-intensified = 1.
          MODIFY SCREEN.
        ELSE.
          IF screen-group1 = 'M5' .
            screen-length = 10.
            MODIFY SCREEN.
          ELSE.
            IF screen-group1 = 'M6' .
              screen-active = 0.
              MODIFY SCREEN.
            ELSE.
              IF screen-group1 = 'M7' .
                screen-display_3d = 1.
                MODIFY SCREEN.
              ELSE.
                IF screen-group1 = 'M4' .
                  screen-output = 0.
                  MODIFY SCREEN.
                ELSE.
                  IF screen-group1 = 'S1' AND
                  screen-name = 'P_LIFNR'.
                    screen-values_in_combo = 1.
                    MODIFY SCREEN.
                  ELSE.
                    IF screen-group1 = 'S1' AND
                    screen-name = 'P_LAND1'.
                      MODIFY SCREEN.
                    ENDIF.
                  ENDIF.
                ENDIF.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
<b>please reward points if helpfull.</b>
with regards,
radhika kolluru.

Module pool / Screen Prog is there any standard SAP functionality ?

Similar Messages

Maybe you are looking for