Module pool with table controlls

Hi all.
I have an Issue in module pool program.
I am developing it to update a d/b table.in that I have
a total of 40 fields are there.in those 10 are to be entered and save.
I am using table controlls.Can any body help me to solve
1.the manual entry fields are date fields.I am getting those from my internal table.I want f4 help for those date filds.it is not comming here.
but in the d/b table fot that corresponding field it is comming.
2.in the attributes of the table controll ,it is giving the option to freeze the number of columns.but this numbering is from left to right.
but I want to freeze coloumns in between.
is it possible.
3.can any body tell me the logic for table controll to update the d/b table.Because there is no row selection(left side pushbuttons to the table controll).
how to capture the data what I entered in the rows.
Thanks in advance,
Regards,
Eswar

venkat,
We cannot freeze the columns in the middle.
Check for F4 what attribute is set for the field in screen layout. ( field attributes programs tab->Poss. entries)
Refer this example for tablecontrol
http://www.sappoint.com/abap/dptc1.pdf
Regds
Man

Similar Messages

Sort up and sort Down push buttons in module pool with table control wizard

hi,
i have created 2 buttons for Sort up and sort Down push buttons in module pool with table control wizard
please any one can help me.
regards

Hi
Following code is to enable and disable the tbl control using two buttons. Just alter the code and for each button write the sort code.
REPORT YJAN27_SCREEN                                               .
TABLES: SFLIGHT, YFLIGHT_28.
TYPES: BEGIN OF struct1,
      carrid like sflight-carrid,
      connid like sflight-connid,
      fldate like sflight-fldate,
       END OF struct1.
CONTROLS TBL1 TYPE TABLEVIEW USING SCREEN 2700.
DATA: OK_CODE LIKE SY-UCOMM,
      CARRID LIKE SFLIGHT-CARRID,                                    "cols in tbl ctrl
      CONNID LIKE SFLIGHT-CONNID,
      FLDATE LIKE SFLIGHT-FLDATE,
      itab TYPE TABLE OF STRUCT1 WITH HEADER LINE,
      cols like line of TBL1-COLS,
      FLAG TYPE I.
FLAG = 1.
CALL SCREEN 2700.
*&      Module STATUS_2700 OUTPUT
*       text
MODULE STATUS_2700 OUTPUT.
SET PF-STATUS 'BACK'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_2700 OUTPUT
*&      Module USER_COMMAND_2700 INPUT
*       text
MODULE USER_COMMAND_2700 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'BACK'.
    LEAVE PROGRAM.
WHEN 'DIS'.                                                         "write code for sort up
    loop AT TBL1-COLS INTO COLS.
       COLS-SCREEN-INPUT = 0.
        MODIFY TBL1-COLS FROM COLS.
    ENDLOOP.
    FLAG = 2.
WHEN 'ENA'.                                                       "write code for sort down
    loop AT TBL1-COLS INTO COLS.
        COLS-SCREEN-INPUT = 1.
        MODIFY TBL1-COLS FROM COLS.
    ENDLOOP.
    FLAG = 1.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_2700 INPUT
*&      Module GET_DATA OUTPUT
*       text
MODULE GET_DATA OUTPUT.
select carrid connid fldate from SFLIGHT into table itab.
ENDMODULE.                 " GET_DATA OUTPUT
*&      Module POPULATE_TBL OUTPUT
*       text
MODULE POPULATE_TBL OUTPUT.
    MOVE-CORRESPONDING ITAB TO SFLIGHT.
ENDMODULE.                 " POPULATE_TBL OUTPUT
*&      Module CHANGE_SCREEN OUTPUT
*       text
MODULE CHANGE_SCREEN OUTPUT.    " use this module if you want to hide the other button
CASE FLAG.
WHEN 1.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_ENA'.
        SCREEN-INVISIBLE = 1.
         MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_DIS'.
        SCREEN-INVISIBLE = 0.
         MODIFY SCREEN.
      ENDIF.
   ENDLOOP.
WHEN 2.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_DIS'.
        SCREEN-INVISIBLE = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_ENA'.
        SCREEN-INVISIBLE = 0.
         MODIFY SCREEN.
      ENDIF.
   ENDLOOP.
ENDCASE.
ENDMODULE.                 " CHANGE_SCREEN OUTPUT
PROCESS BEFORE OUTPUT.
MODULE STATUS_2700.
MODULE CHANGE_SCREEN.     " use this if you want to display one button at a time
MODULE GET_DATA.
loop at itab WITH control TBL1.
    MODULE POPULATE_TBL.       " populate tbl ctrl
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_2700.    " do the sort operations
loop at itab.
endloop.
Hope this helps
Regards,
Jayanthi.K

Select-option in module pool with table Control

HI,
How to use the select-option in Module Pool and how Can i use the Table control in it.
Can any body give me some Clues.
with rgds
Ranjith

Hi ..
PBO.
LOOP at <table contriol>
module --- Inside the module
DATA: g_uti TYPE REF TO cl_fobu_input_util.
if rollname <> space.
     CREATE OBJECT g_uti
       EXPORTING typename =rollname.
*....convert to external pattern
     CALL METHOD g_util->output_convert
       EXPORTING
         field_value_int = p_value                 " This is Tablecontrol-low
       IMPORTING
         field_value_ext = p_value.              " Retrun value for Low
ENDLOOP.
lly you have code in PAI
DATA: g_util_1 TYPE REF TO cl_fobu_input_util.
if rollname <> space.
     CREATE OBJECT g_util_1
       EXPORTING typename = rollname.
*....convert to internal pattern
     CALL METHOD g_util_1->input_convert
       EXPORTING
         field_value_ext   = p_value
       IMPORTING
         field_value_int_c = p_value.
The above code should be written for tablecontrol-high aswell..
you can also refer: Inlcude LSE16NF10 line no 341 & 434 (SE16n)
Nag

Problem in module pool with table control scrolling

hi,
i am using the table control in module pool,in the table control i have radion button for all the rows.
After i got the data into the table control ,if i select radio button and if i press vertical scroll bar button, that radio button is deselecting,how to solve this issue.
Please help me.

Hi
Generally we don't keep radiobuttons in table control for selecting the records
We keep check boxes for selecting the records
Radio button is used to select a single from a group of records and at a time only one is selected, where as checkboxes at a time you can select a single or multiple.
So use checkboxes and code correctly see the doc for Table control
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Reward points if useful
Regards
Anji

Module Pool with Table Control.

Hi,
I have developed two screens .
in the first screen the user enters the data and press the Next Push button then
in the second screen it should display data in the table control.
For that purpose I have written code.
when the user press Next Button then I wrote like this.
case ok_code.
when 'NEXT'.
CALL SCREEN '9001'.
ENDCASE.
AND In the PBO Event of the Screen 9001 I have written a Function Module to Popup the data
in the table control.
But the problem is when the user press the Next Button it is displaying table control without
data. But when the press the Back button and again he press the Next Button then it is displaying.
So, Where is the Problem ?
How can I correct it ?
Bye,
Satya.

Hi
IN PAI
case ok_code.
when 'NEXT'.
select the data into an internal table using the entered fields in the first screen.
so data is there in ITAB.
CALL SCREEN '9001'.
ENDCASE.
in PBO.
between loop..
MOVE the internal table data to the table control fields
endloop.
see the help for TC
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Reward points for useful Answers
Regards
Anji

Module pool Program table control

Hi,
    In Module pool programming, table control i have 10 items out of which in the same colum i want to put them in edit mode and certain in disply mode.
Regards

Hi,
You can use loop at screen,
MODULE passdata OUTPUT.
READ TABLE it_revision INTO wa_rev INDEX tab_clc-current_line.
IF sy-subrc = 0.
    LOOP AT SCREEN.
      IF screen-group1 = '111'.      " 111 IS THE GROUP NAME
        screen-input = 1.          " input mode
        screen-active = 1.         " input mode.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 = '111'.       "GROUP NAME
        screen-input = 0.           " display mode
        screen-active = 1.          " DISPLAY MODE.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDMODULE.                 " PASSDATA OUTPUT
Make the group of those field ,that you want in input mode
Hope it will Solve your problem
Thanks
Arun kayal.

Module pool with object oriented programming

can anyone send me links for module pool with object oriented programming.

hi,
some helful links.
Go through the below links,
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
<u>Sample std pgms.</u>
ABAP_OBJECTS_ENJOY_0           Template for Solutions of ABAP Object Enjoy Course
ABAP_OBJECTS_ENJOY_1           Model Solution 1: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_2           Model Solution 2: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_3           Model Solution 3: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_4           Model Solution 4: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_5           Model Solution 5: ABAP Objects Enjoy Course
DEMO_ABAP_OBJECTS              Complete Demonstration for ABAP Objects
DEMO_ABAP_OBJECTS_CONTROLS     GUI Controls on Screen
DEMO_ABAP_OBJECTS_EVENTS       Demonstration of Events in ABAP Objects
DEMO_ABAP_OBJECTS_GENERAL      ABAP Objects Demonstration
DEMO_ABAP_OBJECTS_INTERFACES   Demonstration of Interfaces in ABAP Objects
DEMO_ABAP_OBJECTS_METHODS      Demonstration of Methods in ABAP Objects
DEMO_ABAP_OBJECTS_SPLIT_SCREEN Splitter Control on Screen
Rgds
Reshma

Module pool program, table control edit

Hi,
I am doing module pool programming with table control. I have a table control on my screen which is assigned to scarr table with New, Modify, Save, and Delete buttons. When I click on New and Save, the new record is adding to the table where as for Modify, I selected a row, edited, and clicked on save. Only the internal table is getting modified at the time but not the original table. How to update the table in database? Delete is also not working. Please give some idea on this or links related to table control with sample code.
Thanks in advance.

Hi,
modify <table name>.
it will do it
Regards

Module Pool with select options

Hi,
I have created select-option and radio button in Module pool. My req is that I when the user enters any value and click on the radio button the respective programs should be executed.
Thanks
Hari

Hi Hariharan,
I would recommend you to use primarily use push button and then after SUBMIT statement, and also the example for the same is provided below:
*Code used to execute a report
SUBMIT Zreport.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
                with p_param2 = 'value'.
Please validate the same at your end as well, please come back, if inputs are required.
BR/Thanks
Pranav Agrawal

Module pool in table control wizared

Hi
I have created in module pool table control wizared created insert and delete rows in output.
insert the data in table control the colume is not save.
can u tell me the save the data in table control.
pls tell me the flow of save button.
after insert the record how to save the data in table control wizard in module pool.
can u tell me the save button functionality.
after save data will add in table.

Hi Venkat,
I think you have already posted this query with the subject line "Table control" with the thread below today.
table control
Try with the online link we have provided you will learn that way on your own.
Nobody here will write the whole logic for you.
Try to put in your efforts.
Regards
Abhii
Edited by: Abhii on Sep 8, 2010 3:13 PM

Module Pool Progrmaing Table Control

Hi Experts,
I Have Created a Module pool Program, In that I have add a table Control.
i have write all logic and i have to update to the database also. Now my Requirement is when i am enter the data in the table control in first field after that i press enter it will go to the next field this is my requirement..
example : in my table control i have 3 fields
matnr maktx meins
i have enter the value of matnr after i press tab button it will go to the next field like that i need in replacing of tab button i press enter it will go to the next field.
Thanks
Sankar

Hi ,
Initialy you have to set the cursor inside the table control required filed using SET cursor statement inside the PBO , each user interaction in PAI you have to capture the line of table control where cursor is currently set using GET CURSOR and again in PBO SET the cursor for your required filed .
Regards,
Ratheesh BS

Module Pool with Selection Screen

I have a module pool in which I've created a sub screen to accommodate select-options.
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
select-options: r_matnr for mara-matnr.
selection-screen end of screen 1010.
I've put this selection screen in an include of the module pool.
Now I can't seem to see my variable, r_matnr, in the program. How to I pass the value to the program and what have I done wrong. Perhaps where I placed the selection-screen.
Any help would be appreciated.
PS... I can see my screen but when I put the debug on, no value is in r_matnr.
Thanks Marianne

Hi Mariane,
Placing the selection screen declarations in an include does not make any issues. Can you please check your code. For your reference, I am placing a simple piece of code, in which I am also calling a selection screen from within a module pool and displaying the output of the select options. Execute this code and check what is the difference between your code and this.
REPORT zabi_test04.
INCLUDE zabi_test04_i001.
INCLUDE zabi_test04_i002.
START-OF-SELECTION.
   CALL SCREEN 9000.
*&      Module STATUS_9000 OUTPUT
*       text
MODULE status_9000 OUTPUT.
   SET PF-STATUS 'STAT9000'.
   SET TITLEBAR 'TL1'.
ENDMODULE.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
*       text
MODULE user_command_9000 INPUT.
   save_ok = ok_code.
   CLEAR ok_code.
   CASE save_ok.
     WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
       LEAVE PROGRAM.
     WHEN '&SELECT'.
       lv_dynnr = '1001'.
       CALL SCREEN 9001.
   ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
*&      Module STATUS_9001 OUTPUT
*       text
MODULE status_9001 OUTPUT.
   SET PF-STATUS 'STAT9001'.
   SET TITLEBAR 'TL2'.
ENDMODULE.                 " STATUS_9001 OUTPUT
*&      Module USER_COMMAND_9001 INPUT
*       text
MODULE user_command_9001 INPUT.
   save_ok = ok_code.
   CLEAR ok_code.
   CASE save_ok.
     WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
       LEAVE TO SCREEN 0.
     WHEN '&EXECUTE'.
       WRITE s_matnr-low.
       LEAVE TO LIST-PROCESSING.
   ENDCASE.
ENDMODULE.                 " USER_COMMAND_9001 INPUT
*& Include           ZABI_TEST04_I001
TABLES : mara.
DATA : ok_code    TYPE sy-ucomm,
        save_ok    TYPE sy-ucomm,
        lv_dynnr   TYPE sy-dynnr VALUE '1001'.
*& Include           ZABI_TEST04_I002
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
*PARAMETERS p_werks TYPE t001w-werks.
SELECT-OPTIONS s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 1001.
Regards,
Abijith

Regarding module pool with alv

hi experts,
i have developed a module pool program in which the data is coming in the table control ,what the user wants that on clicking one push button a alv report will come depending upon the data which i enterd in the selection screen of the module pool,,for this what sud i write under the push button plz help me....

Hi
In the table control keep a Button
First select the Records in the tables control into an Internal table
when you press that REPORT button in the table control screen these Selected records data which is in Internal table has to be displayed in a ALV report.
Hope when the data is internal tables just call the fun module of ALV
In the PAI of table control screen
case ok_code.
when 'REPT'.
loop at itab where v_chk = 'X'.
...append the selected records to another ITAB1.
endloop.
leave to list-processing
perform_display_report.
endcase.
In the perform you process the internal table, build the field catalog and display the ALV report
Reward points for useful Answers
Regards
Anji

Comparing screen input in program in module pool programming(table control)

Experts,
I am a newbie in ABAP. I am working dialog programming where I am replicating PR creation. I am asking user to enter item number, material number and plant. I am validating material number and plant using chain and endchain. This validation is working fine and it throws error message if user enters invalid input. I am able to see corresponding details (corresponding details like unit of measure, delivery date and short text etc. if values entered are correct.) when user clicks on ADD button. Now I have one problem. If user enters same item number twice it should throw error message. I am not able to figure out how it should be done. I thought to set flag = 'X' after user enters item number.
I am using table control. The validation part for material number(matnr) and plant (werks) work fine. I am getting problem while checking entered item number to check duplication.
User should not enter the same item number again.
In my structure i have defined a variable called checkflag(1) type c. and i am doing it now following way. Right now my checkflag code is commented.
Following is my snippet for the same.
Please let me know your ideas/suggestions and advices.
DATA : counter TYPE i,
         itmno1 TYPE i.
SELECT SINGLE matnr
       FROM mara INTO matno WHERE matnr = it_pr-matnr.
SELECT SINGLE werks
         FROM t001w INTO plant WHERE werks = it_pr-werks.
SELECT SINGLE matnr werks
         FROM marc INTO (matno,plant)
    WHERE matnr = it_pr-matnr AND werks = it_pr-werks.
itmno1 = it_pr-bnfpo.
IF ok_code = 'ADD'.
    IF it_pr-matnr <> matno OR it_pr-werks <> plant AND it_pr-bnfpo = ''.
      MESSAGE 'Not a Valid material number or plant. Please enter valid values.' TYPE 'E'.
    ELSEIF it_pr-matnr = matno AND it_pr-werks = plant AND it_pr-bnfpo <> ''.
      SELECT SINGLE maktx FROM makt INTO stext WHERE matnr = it_pr-matnr.
      SELECT SINGLE meins FROM mara INTO tmeins WHERE matnr = it_pr-matnr.
      SELECT SINGLE lpein FROM eban INTO tlpein WHERE matnr = it_pr-matnr.
*      if it_pr-bnfpo = itmno1.
*        it_pr-checkflag = 'X'.
*      endif.
      READ TABLE it_pr WITH TABLE KEY
      checkflag = it_pr-checkflag
      bnfpo = it_pr-bnfpo
      maktx = it_pr-maktx
      matnr = it_pr-matnr
      eindt = it_pr-eindt
      meins = it_pr-meins
      werks = it_pr-werks
      lpein = it_pr-lpein.
*      if it_pr-checkflag = 'X'.
*          message 'Please enter another item number.' TYPE 'E'.
*          endif.
      IF sy-subrc <> 0.
        it_pr-bnfpo = itmno1.
        it_pr-maktx = stext.
        it_pr-lpein = tlpein.
        it_pr-meins = tmeins.
        APPEND it_pr.
      ENDIF.
      IF sy-subrc = 0.
        MESSAGE 'Please enter another item number.' TYPE 'E'.
      ENDIF.
    ENDIF.
ENDIF.

Indeed thank you very much @medha24 and @gargi sarkar.
If I use current-line, I will have to skip first entry as first entry should be appended. Then only I would be able to compare it with newly entered value. I will have to use loop end loop within the PAI. I have already written this code in the validation PAI itself.
I am not getting how I should use loop endloop effectively so that control will go to the next iteration effectively. Right now with this code, I am getting partial success if I enter item number in bulk (more than one item number as input at same time). later, even though I enter correct values I get error message as it doesn't find next entry in the table. It only appends first records only. Therefore, I am looking to enter first entry without any check and later entries should be compared and appended. I would appreciate your ideas/suggestions.
Thank you.
Best reagrds.

Exporting Module pool with screen

Hi,
I want to export module pool that I created to a file and import it back later. I could find a SAP Program RSTXSCRP to export SAPscript but no success in exporting a function module. Please help.
Regards,
Nikhil

Hi Nikhil!
If you just want to do this once, you can use transaction SE80 and menu point Utilities - More utilities - download (for each include / component).
Otherwise a special program is easier to use, take e.g. this one:
http://www.members.tripod.com/abap4/Upload_and_Download_ABAP_Source_Code.html
Regards,
Christian
P.S.: or these one:
... or this one:
http://sap.ittoolbox.com/code/d.asp?d=1623&a=s
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/finding your code in bsp applications.article
http://www.geocities.com/rmtiwari/Resources/Utilities/WebViewer.html
Message was edited by: Christian Wohlfahrt

Module pool with table controlls

Similar Messages

Maybe you are looking for