Monitor Date/Time activities routinely fail (Policy Stopped by User)

Hi guys,
Lately we've been creating a bunch of jobs in Orchestrator that are supposed to run every X minutes/hours. Usually these work fine however sometimes they either fail to run and actually stop the running Runbook in its entirety or fail to run but the next
time it's triggered it will run (but sometimes those runs will keep generating errors on some activities such as "Run .NET Script" until it is manually restarted.)
I've checked the Event Viewer but I don't see anything wrong at the time when the Runbook fails. I've also checked the Trace logs but they don't tell me much... (increased the level of logging in the meantime from 1 to 7 so maybe that will help). Not sure
what I am looking for either to be honest.
Anyone that has had this problem as well or any ideas what the cause may be (or where to start looking)? I really don't wanna go back to Windows Scheduled tasks :)

Hi,
also check the Orchestator Events (Tab Events in Runbook Designer). I suppose that a Runbook Server has problems to the same time "Monitor Date/Time" fails, perhaps contacting the Orchestrator Datastore.
"AuthorizationManager check failed" only happens sporadically for the same "Run .Net Script" Activity? Are the multiple Runbook Servers with different Logon Accounts for Orchestrator Runbook Service? (https://social.technet.microsoft.com/Forums/en-US/9fe7a237-05dd-4843-bf88-15be74e64c09/authorizationmanager-check-failed-run-net-script-only-on-runbook-server?forum=scogeneral)
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu
Hi Stefan,
Thank you for pointing me in the right direction. I think I found the source of the problem:
We basically have three Runbook servers and only one of them is designated as primary. One of the standby machines runs in a different domain. That would explain why we'd get the Authorization error as the Runbook service from the one domain tries
to run in the other. In any case it means that for some reason the Orchestrator decides to use a standby server instead of the primary one. For as far as I can see I the RunbookService.exe has been running for quite a long time but I do see some datastore
connection problems in the traces (perhaps a short disconnection during a vMotion of the Runbook server).
I've now used the Override option to designate only the primary server while I investigate further. But so far the jobs have been running without a problem.

Similar Messages

How to find last activites date time in BCC by all BCC internal users?

Is there a way to find the last activities date and time in BCC by all BCC internal users?

It looks like /DSS/TrackActivity.sdl does the job for normal commerce users, but there is no such scenario for Internal users(BCC users), so this is something we need to do for internal users.
Is my understanding correct?

Date & Time: Can't Change Year on a User Profile

I have multiple profiles on my Mac. One of the profiles has a year of "2556," even though I have it set to sync automatically via time.apple.com. Now when I log into a different user profile, the year is current "2015." I've unchecked to "set date and time automatically" and tried to change it manually on the user profile in question, but unable to change it.
Any suggestions on how to force a change on a profile?

Good link. The Language & Region was a good place to look. Attempting to restore defaults was not an option. However the Region was pointing to Africa. Once I changed that, everything else fell in place.
Thanks!

Autoscale has not been able to read any monitoring data for ...

We´re receiveing an Error Message from the Autoscale functionality for a complete week now. This has happened before when the "Storage incident" happened. But the problem was resoloved when the functionality of the Storage was fixed. But since
the 22th of December it seems that the autoscaling dosn´t work any more. All of the Autoscaled Machines are up while we´re having almost no traffic during the holidays.
Is there someone who has a solution? Or is this one of these "drop all machines and recreate them" issues?
The error message is:
Autoscale has not been able to read any monitoring data for XXX:XXX since 12/22/2014 11:39:01 AM UTC
Autoscale task failed for XXX:XXX due to no metrics available

Hi Marc,
We could view the
latest information from Azure Dashboard
http://azure.microsoft.com/en-us/status/#history
12/22
Storage - East US - Partial Service Interruption
From 10:10 to 11:40 UTC on 22 December, 2014 a limited subset of customers using Storage in East US may have experienced intermittent latency or time out errors when attempting to reach storage resources. This incident has now been mitigated.
Since
Autoscale requires monitoring data to be collected from your VM/role instances in order to scale . While
there have network issue on the storage
accounts that contain your monitoring data, so it will fail to autoscale.
Now, this incident has now been mitigated.I suggest that you could check if
Autoscale work vey well.
In addition,I suggest that you could refer to the link below
for more details regarding Autoscale not working:
https://social.msdn.microsoft.com/Forums/azure/en-US/bc2048c4-8d49-4c54-b150-f263808c4b7a/notification-could-not-automatically-scale-xxx-because-monitoring-data-was-not-found?forum=windowsazuremanagement
Best Regards,
Kevin Shen.

Adobe LiveCycle Date/Time Field Scripting Question

I have a date/time field in Livecycle which the end user chooses a random date from. I need to populate a date 180 days from this date for an eligible to date/time field. I have tried various javascript and formcalc options with no success.

Try this site here for a reference: http://eslifeline.wordpress.com/2008/09/26/date-manipulation/
The following was the use case. A form has 2 TextFields Start_Date and End_date
User enters a certain date in the Start_Date text field for example 09/24/08 (MM/DD/YY)
The End_Date should add 90 days to the Start_date and populate the End_Date
The following script would do that
var current = Date2Num(Start_Date.rawValue, “MM/DD/YY”)
var future = current+90
var newDate = Num2Date(future,”MM/DD/YY”)
form1.#subform[0].End_Date.rawValue = newDate
Validating End Date is later than Start Date
var diff = Date2Num(EndingDate.rawValue, “YYYY-MM-DD”) – Date2Num(StartingDate.rawValue, “YYYY-MM-DD”)
if (diff > 0) then
xfa.host.messageBox(“The End date is later than start date”)
else
xfa.host.messageBox(“PLEASE CHECK….The End date is before the start date”)
endif

TS3694 I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?

I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?

Restore iPhone with current iTunes on computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution. Of if easier for you, take receipt and iPhone, box and everything and return to where you bought it.

I recently upgraded to Mavericks and the time machine is failing to backup. Time Machine began only backing up twice a day and now has stopped.

I recently upgraded to Mavericks and the time machine is failing to backup. Time Machine began only backing up twice a day and now has stopped.

This is the error message I got:
2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/TOSHIBA EXT/Backups.backupdb/Quincy‚Äö√Ñ√¥s iMac size:37
2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Backup failed with error 2: 2

How do I stop auto update of date/time

Hi,
I'm starting to despair, a while ago I stupidly clicked on auto update/time on a letter I was working on, it seemed like a good idea at the time. But now whenever I open any letter the date is automatically updated which is a major problem as I am losing the references to when I actually wrote and therefore sent these letters. I'm too scared to open letters now because I'll lose this important piece of information.
Any help appreciated!
Thanks
Nathalie

Next time, don't use the Pages 's insert date_time feature.
Use the one delivered in the free WordService from Devon Technologies.
It always inserts a fixed date_time.
But I have wondering about your problem.
The Pages User Guide states:
• To add and format the date and time, place the insertion point where you want the value to appear, and then choose Insert > Date & Time.
To change the date and time format, Control-click the date and time value, choose Edit Date & Time, and then choose a date and time format from the pop-up menu. *If you want the document to always show the current date and time, select “Automatically update on open.”*
Which, if I understand well means that the default setting is that the inserted date_time is a frozen (fixed) one.
Yvan KOENIG (VALLAURIS, France) mardi 30 mars 2010 16:29:17

How to create a Power Pivot Chart with Dynamic X-Axis (date time) similar to that in Performance monitor (Start-- Run-- Perfmon)?

Hi,
I want to create a Power Pivot Chart and a Power View chart in Power BI where the x-axis should be the current system date time axis and it's functionality should be similar to that in Perfmon.exe tool (Start-->Run-->Perfmon)?

Hi Manjunath,
Do you mean you want to programmatically create such a dynamic chart which has a X axis of time? If you just want to do this manually, please take a look at this document which is talking about how to create charts with Power BI:
Charts and other visualizations in Power View
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Date & time change frequently on startup. antivirus stops working also.

For the past month the date & time are changed when I start my computer, an HP Pavilion Elite m9077c with Vista.It doesn't happen everytime, but about 2/3 of the time. I can't download my email until the date is corrected, I get onscreen messeges that Windows media player won't work, & the status of Norton antivirus is frequently changed to "not protected". After restoring the correct date everything seems OK. What is going on? Is this the cms battery going bad , does my computer have a virus?When I run the Hardware diagnostic tool in the PC help & tools folder I get no indication that the cms battery is bad.

tk797,
As the CMOS battery is supposed to retain date and time, and that is the issue, I would replace it.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph04375&cc=us&dlc=en&lc=en&product=3624429&tmp_...
http://www.computerhope.com/issues/ch000239.htm
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

10.6.8 Date/time stopped working

Hi, suddenly my date/time icon in the top bar is frozen at last Monday at 17:24. I checked my Pref but it seems properly set up.
--In fact all my Apple OS icons on the top right are giving me the SPOD.
Third-party software with icons up there works fine like Sophos and Dropbox.
Any clues? THanks!
Mac Mini, 10.6.8

Sorry to have troubled anyone, a good reboot was all it needed. I hope.

Date, time and other possible items are not available in menu bar

My menu bar is not visible at the top right corner of the screen. Spotlight has also disappeared. This is true for all users and even when I reboot.
System caches have been cleared, prebindings rebuilt and all applications using the sidebar have been deleted from the system.
Is there any way of recuperating the menu bar without re-installing OS X?
Thanks in advance for your help.

Francine,
Thank you for your suggestion. I have done what you suggest and, unfortunately, the log has hundreds of errors.
I attach the logsto see if you or any other kind genious can help!! Thanks
SYSTEMUISERVER.CRASH LOG
Date/Time: 2007-06-07 17:22:53.812 +0200
OS Version: 10.4.9 (Build 8P2137)
Report Version: 4
Command: SystemUIServer
Path: /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer
Parent: WindowServer [72]
Version: 1.4.4 (192.12)
PID: 266
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/ICANotifications.framework/Versions/A/ICANoti fications
Referenced from: /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/ICANotifications.framework/Versions/A/ICANoti fications: file to short
SYSTEM LOG
Jun 7 17:21:02 Roberto-Zachmann-2 loginwindow[80]: sendQuitEventToApp (NotificationExec): AESendMessage returned error -1712
Jun 7 17:21:12 Roberto-Zachmann-2 shutdown: reboot by roberto:
Jun 7 17:21:12 Roberto-Zachmann-2 SystemStarter[456]: lstat("/Library/StartupItems/NortonAutoProtect.kextcache/NortonAutoProtect.kext cache"): Not a directory
Jun 7 17:21:13 Roberto-Zachmann-2 Parallels: Stopping DHCP/NAT daemon...
Jun 7 17:21:13 Roberto-Zachmann-2 SystemStarter[456]: authentication service (473) did not complete successfully
Jun 7 17:21:14 Roberto-Zachmann-2 Parallels: Unloading Network module...
Jun 7 17:21:14 Roberto-Zachmann-2 Parallels: Unloading ConnectUSB module...
Jun 7 17:21:14 Roberto-Zachmann-2 Parallels: Unloading Monitor module...
Jun 7 17:21:16 Roberto-Zachmann-2 kernel[0]: [Parallels] Parallels VM observer thread stopped
Jun 7 17:21:16 Roberto-Zachmann-2 Parallels: Unloading Hypervisor module...
Jun 7 17:21:16 Roberto-Zachmann-2 kernel[0]: [Parallels] Parallels Workstation Hypervisor exited.
Jun 7 17:21:16 Roberto-Zachmann-2 Parallels: Shutdown complete.
Jun 7 17:21:16 Roberto-Zachmann-2 SystemStarter[456]: The following StartupItems failed to properly start:
Jun 7 17:21:16 Roberto-Zachmann-2 SystemStarter[456]: /Library/StartupItems/NortonMissedTasks
Jun 7 17:21:16 Roberto-Zachmann-2 SystemStarter[456]: - SystemStarter internal error
Jun 7 17:21:16 Roberto-Zachmann-2 SystemStarter[456]: /Library/StartupItems/NortonAutoProtect
Jun 7 17:21:16 Roberto-Zachmann-2 SystemStarter[456]: - SystemStarter internal error
aped[72]: NotificationExec[540] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
Jun 7 17:21:55 localhost kernel[0]: BInterface: family specific matching fails
Jun 7 17:21:59 localhost kernel[0]: ParallelsConnectUSB(0x6e91380)::start() Control service not started!
Jun 7 17:21:59 localhost kernel[0]: IOUSBInterface: match category IODefaultMatchCategory exists
Jun 7 17:21:59 localhost kernel[0]: IOUSBInterface: family specific matching fails
Jun 7 17:21:59 localhost kernel[0]: ParallelsConnectUSB(0x6e91500)::start() Control service not started!
Jun 7 17:21:59 localhost kernel[0]: IOUSBInterface: match category IODefaultMatchCategory exists
Jun 7 17:21:59 localhost kernel[0]: IOUSBInterface: match category IODefaultMatchCategory exists
Jun 7 17:21:59 localhost kernel[0]: ParallelsConnectUSB(0x6e99a80)::start() Control service not started!
Jun 7 17:21:59 localhost kernel[0]: IOUSBInterface: family specific matching fails
Jun 7 17:21:59 localhost kernel[0]: ParallelsConnectUSB(0x6e91d80)::start() Control service not started!
Jun 7 17:21:59 localhost kernel[0]: ParallelsConnectUSB(0x6e91d80)::start() Control service not started!
Jun 7 17:21:59 localhost kernel[0]: Previous Shutdown Cause: 3
Jun 7 17:21:59 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jun 7 17:21:59 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:00:aa:9a
Jun 7 17:21:59 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:00:aa:9b
Jun 7 17:21:55 localhost mDNSResponder-108.5 (May 9 2007 15: 07:55)[33]: starting
Jun 7 17:21:56 localhost memberd[41]: memberd starting up
Jun 7 17:21:56 localhost lookupd[49]: lookupd (version 369.6) starting - Thu Jun 7 17:21:56 2007
Jun 7 17:21:57 localhost kextd[27]: kextdwatchvolumes: couldn't set up diskarb sessions
Jun 7 17:21:57 localhost diskarbitrationd[39]: disk0s2 hfs 684506F7-1A8B-3BCF-A060-0C500160CF10 B_U /Volumes/B_U
Jun 7 17:21:57 localhost diskarbitrationd[39]: disk2s3 hfs B6A22685-376C-38C2-A062-B40F86648A1F media /Volumes/media
Jun 7 17:21:58 localhost diskarbitrationd[39]: disk1s2 hfs 70822F8A-B53B-3665-94A9-018D01233BA8 Macintosh HD /
Jun 7 17:21:59 localhost configd[37]: No AirPort Driver found.
Jun 7 17:22:00 localhost lookupd[69]: lookupd (version 369.6) starting - Thu Jun 7 17:22:00 2007
Jun 7 17:22:00 localhost DirectoryService[51]: Launched version 2.1 (v353.6)
Jun 7 17:22:01 Roberto-Zachmann-2 kernel[0]: Intel8254x -- Link Up -- 00:17:f2:00:aa:9b -- called by interruptOccurred() --
Jun 7 17:22:01 Roberto-Zachmann-2 kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x45e1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Jun 7 17:22:01 Roberto-Zachmann-2 configd[37]: setting hostname to "Roberto-Zachmann-2.local"
Jun 7 17:22:02 Roberto-Zachmann-2 kernel[0]: disk3: alignment error.
Jun 7 17:22:02 Roberto-Zachmann-2 kernel[0]: disk3: alignment error.
Jun 7 17:22:02 Roberto-Zachmann-2 kernel[0]: disk3: alignment error.
Jun 7 17:22:02 Roberto-Zachmann-2 kernel[0]: disk3: alignment error.
Jun 7 17:22:02 Roberto-Zachmann-2 kernel[0]: disk3: alignment error.
Jun 7 17:22:02 Roberto-Zachmann-2 retrospectcd.util: [65]: ...ret = -2\n
Jun 7 17:22:02 Roberto-Zachmann-2 retrospectcd.util: [65]: File system unrecognized; a mount is not possible.\n
Jun 7 17:22:03 Roberto-Zachmann-2 SystemStarter[44]: lstat("/Library/StartupItems/NortonAutoProtect.kextcache/NortonAutoProtect.kext cache"): Not a directory
Jun 7 17:22:03 Roberto-Zachmann-2 configd[37]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jun 7 17:22:03 Roberto-Zachmann-2 configd[37]: posting notification com.apple.system.config.network_change
Jun 7 17:22:03 Roberto-Zachmann-2 lookupd[80]: lookupd (version 369.6) starting - Thu Jun 7 17:22:03 2007
Jun 7 17:22:03 Roberto-Zachmann-2 Parallels: Loading Hypervisor module...
Jun 7 17:22:04 Roberto-Zachmann-2 kernel[0]: [Parallels] Parallels Workstation Hypervisor started.
Jun 7 17:22:04 Roberto-Zachmann-2 Parallels: Loading Monitor module...
Jun 7 17:22:04 Roberto-Zachmann-2 kernel[0]: [Parallels] Parallels VM observer thread started
Jun 7 17:22:04 Roberto-Zachmann-2 Parallels: Loading ConnectUSB module...
Jun 7 17:22:05 Roberto-Zachmann-2 Parallels: Loading Network module...
Jun 7 17:22:05 Roberto-Zachmann-2 Parallels: Loading Virtual Ethernet module...
Jun 7 17:22:09 Roberto-Zachmann-2 kernel[0]: Intel8254x -- Link down -- 00:17:f2:00:aa:9a -- called by enableHardware() --
Jun 7 17:22:06 Roberto-Zachmann-2 Parallels: Staring DHCP/NAT daemon...
Jun 7 17:22:09 Roberto-Zachmann-2 kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Jun 7 17:22:08 Roberto-Zachmann-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jun 7 17:22:09 Roberto-Zachmann-2 kernel[0]: comparallels_kextPvsvnic0: Ethernet address 00:01:23:45:67:89
Jun 7 17:22:09 Roberto-Zachmann-2 mDNSResponder: Adding browse domain local.
Jun 7 17:22:09 Roberto-Zachmann-2 kernel[0]: comparallels_kextPvsvnic1: Ethernet address 00:10:32:54:76:98
Jun 7 17:22:10 Roberto-Zachmann-2 pvsnatd[215]: en2: DHCP for 10.37.129.2-10.37.129.254 netmask 255.255.255.0
Jun 7 17:22:10 Roberto-Zachmann-2 configd[37]: target=enable-network: disabled
Jun 7 17:22:10 Roberto-Zachmann-2 bootpd[228]: interface en0: ip 192.168.2.1 mask 255.255.255.0
Jun 7 17:22:10 Roberto-Zachmann-2 bootpd[228]: interface en1: ip 192.168.1.4 mask 255.255.255.0
Jun 7 17:22:10 Roberto-Zachmann-2 named[229]: starting BIND 9.3.4 -c /etc/com.apple.named.conf.proxy -f
Jun 7 17:22:10 Roberto-Zachmann-2 named[229]: running
Jun 7 17:22:10 Roberto-Zachmann-2 Parallels: Restarting InternetSharing...
Jun 7 17:22:10 Roberto-Zachmann-2 Parallels: Restaring CiscoVPN...
Jun 7 17:22:10 Roberto-Zachmann-2 Parallels: Initialization complete.
Jun 7 17:22:13 Roberto-Zachmann-2 loginwindow[211]: Login Window Started Security Agent
aped[72]: NotificationExec[243] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[244] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[245] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: mcxd[238] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[246] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[247] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[248] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[249] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[250] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[260] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
Jun 7 17:22:54 Roberto-Zachmann-2 crashdump[267]: SystemUIServer crashed
Jun 7 17:22:55 Roberto-Zachmann-2 crashdump[267]: crash report written to: /Users/roberto/Library/Logs/CrashReporter/SystemUIServer.crash.log
aped[72]: NotificationExec[273] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: TechToolProtecti[297] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
aped[72]: NotificationExec[299] is running as the super-user. It is not possible for Application Enhancer to affect this process in any manner whatsoever.
Jun 7 17:23:53 Roberto-Zachmann-2 mDNSResponder: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 01810A00 en0/4 to 192.168.2.1:49203 skt 9 error -1 errno 12 (Cannot allocate memory) 1574215691
Jun 7 17:24:08 Roberto-Zachmann-2 mDNSResponder: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 01810A00 en0/4 to 192.168.2.1:49205 skt 9 error -1 errno 12 (Cannot allocate memory) 1574231127
MacPro Mac OS X (10.4.7)

Login Date/time & Logout Date/time of User in apex

Hi,
Is there any apex internal table/view where I can get the Login Date/time & Logout Date/time per user ?
Regards,
Benz

Benz wrote:
Is there any apex internal table/view where I can get the Login Date/time & Logout Date/time per user ?No APEX version = no definitive answer...
APEX 4.1 offers:
<li><tt>APEX_WORKSPACE_ACTIVITY_LOG</tt>
<li><tt>APEX_WORKSPACE_ACCESS_LOG</tt>
Access these through Home > Application Builder > Application > Utilities > Application Express Views
See: Creating Custom Activity Reports Using APEX_ACTIVITY_LOG
Note that the underlying logs are purged on a regular basis, so for the long term you need to copy the data to your own tables.
Home > Administration > Monitor Activity provides reports based on this data.
APEX 3.0 has Home> Application Builder > Application > Application Reports > Activity > Page Views by Session which is probably closest to what you're looking for. Can't find this so far in APEX 4.x: presumably superseded by the Home > Administration > Monitor Activity > Page Views > By Interactive Report option?
Note however that the concensus among the wise is that accurate "logout" statistics with APEX (or any browser-based system) is impossible. How many users actually logout using using a method that triggers a capturable event at the actual time they stop using the system? How many are going to close the current browser tab? Or the entire browser window? Or press Cmd-Q? Or click a bookmark for a different location? Or type "p0rn" into the Search box? Or switch to another window and spend the rest of the morning reading Twitter? Or shutdown the machine? Or run out of battery power? Or lose their wifi connection? Or get timed-out during the fire drill? Or go home for the night after locking their PC with everything still running? Or...

TES 6.1Fault monitor Poll Time issue

Currently we have installed TES Master Version 6.1.0.310, plugin(tes-6.0) - version 6.1.0.301, with a Primary Master, Backup Master and Fault monitor. However, viewing the Mastert Status and the fault monitor tab, it seems that the "Poll Time" display is stuck in 07/29/2013 on today's display. I have stopped the primary, backup masters, Also, stopped Fault monitor, removed fault monitor installation, reboot the server, installed the fault monitor software and patched it, and still displaying 07/29/2013 on today's client manager, Master Status, Fault monitor tab. Have a ticket open with CISCO, but have not received feedback yet. Did anyone have seeing the same issue if you have a Fault tolerance environment on TES 6.1? thanks!

WE have corrected this situation with the fault monitor for Tidal 6X. Basically, since we are on the early stages on the project, we have decided to blow away the entire TES 6X environment by removing the installation on the Primary, Backup masters, fault monitor, client manager, and as far as drop the database and remove the Tidal account from the SQL server. We also cleaned any Tidal folders left over on the windows servers after uninstalled the TES Software and reboot the corresponding windows servers. Performed and clean out-of-the box installation, by installing the primary master first and check the logs. Once the master stop as we left empty the demo code field during the installation, then we apply the permanent license and started the primary master. Proceed to install the fault monitor, backup master and client manager as TES base line 6.1.0.133. Proceed to stop Client manager, Primary, backups master, fault monitor. Restart Fault monitor, started primary master, Backup master and Client Manager successfully. Log into the Client manager and master status pane for the fault monitor was showing the correct date/time as expected. Subsequently, patch the entire environment to the latest patch for master 6.1.0.310 and plugin(tes-6.0) 6.1.0.301, and TES Client manager and master status pane for the fault monitor was showing the correct date/time as expected once again,

Time Capsule backup failed error -43?

Hi and Thanks to Anyone in Advance!
Below is the Time Capsule Error Log I get when doing a Time Machine Backup, wirelessly, on my 2T Time Capsule HD/Router.
Initial Setup and Backup done via ethernet, flawlessly, two months ago. Subsequent backups worked until about three days ago (Why, I have not a clue!)
Often, using Airport Utility, the Time Capsule does not appear. Turning off Computer Airport and on again, the disk becomes magically available for backup. Similar problem with wireless LAN printer...truly a pain. the printer needs to be deleted, and then added again in Print/Fax Preferences. (HP PhotoSmart C7250)
I used Disk Utility" on my Computer HD with a repair permissions, then performed a TC reset, physically, and reconfigured the TC on the LAN, trying a new name "gotyourback" for the backup. Backup begins every time, but keeps failing after about five minutes.
Hope this helps others with similar problem...
Again,
Thanks!
Starting standard backup
Attempting to mount network destination using URL: afp://Suz%20Tim%20Abri%20and%[email protected]/Data
Mounted network destination using URL: afp://Suz%20Tim%20Abri%20and%[email protected]/Data
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Data/Rogers Rocks Home.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x102f20b60 "The file “CM” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x100194860 "The operation couldn’t be completed. Input/output error")
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x1001c76a0 "The file “std” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x100194860 "The operation couldn’t be completed. Input/output error")
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x1001dfc50 "The file “js” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x100194860 "The operation couldn’t be completed. Input/output error")
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x1001e06c0 "The file “en” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x100194860 "The operation couldn’t be completed. Input/output error")
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x1001e11e0 "The file “disofactor.swf” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x100194860 "The operation couldn’t be completed. Input/output error")
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x1001e1320 "The file “diso.sol” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x100194860 "The operation couldn’t be completed. Input/output error")
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x100527ec0 "The file “Download” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x100194860 "The operation couldn’t be completed. Input/output error")
No pre-backup thinning needed: 1.19 GB requested (including padding), 1.38 TB available
Stopping backup.
Error: (-43) SrcErr:NO Copying /Applications/The Learning Company to /Volumes/Time Machine Backups/Backups.backupdb/Rogers Rocks Home/2011-09-08-114311.inProgress/A0EF34AF-A412-4268-B48E-1FD4BF77C8BA/ROGERS LOVE/Applications
Copied 177 files (33.0 MB) from volume ROGERS LOVE.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image.

Ok, if it is only 2months old it shouldn't be a problem..internally at least.
? (10.0.1.1) at b8:c7:5d:c6:3c:db on en1 ifscope [ethernet]
It doesn't have a name.. although it has registered the MAC address and IP .. that is the TC unless you changed it the ? indicates there is an issue with device name. All the entries should have a name.
ray-hs-mac-pro:~ Ray$ arp -a
tc2.bigpond (192.168.2.104) at 60:33:4b:2e:91:77 on en1 ifscope [ethernet]
andrew-gigabyte.bigpond (192.168.2.130) at 0:25:22:16:43:c7 on en1 ifscope [ethernet]
bigpond.bigpond (192.168.2.254) at 0:24:17:71:ad:6d on en1 ifscope [ethernet]
bigpond.bigpond (192.168.2.254) at 0:24:17:71:ad:6d on en0 ifscope [ethernet]
? (192.168.2.255) at ff:ff:ff:ff:ff:ff on en1 ifscope [ethernet]
I have the TC in bridge and it is picking up the domain from my router.. if your using the TC as the main router then you should have entries for gotbackup.local
You are running SL still?? Or lion?
I thought of simply restoring the computer's settings to what they were 4-5 days ago, via Time Machine.
The issue is network.. so restoring will not fix it.
But so is my overdue dentist appointment...really not looking forward to either!
My condolances to your dentist.
I think you need to dig a bit harder to get the cause.
Most importantly are you getting IP via dhcp from the TC?
Do you have ethernet and wireless connected at the same time?

Monitor Date/Time activities routinely fail (Policy Stopped by User)

Similar Messages

Maybe you are looking for